src/arm64/amlogic/meson-sm1-bananapi.dtsi - filogic/uboot - Gitiles

 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2021 BayLibre SAS
  * Author: Neil Armstrong <narmstrong@baylibre.com>
  */

 #include "meson-sm1.dtsi"
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/gpio/meson-g12a-gpio.h>

 / {
 	adc-keys {
 		compatible = "adc-keys";
 		io-channels = <&saradc 2>;
 		io-channel-names = "buttons";
 		keyup-threshold-microvolt = <1800000>;

 		button-sw3 {
 			label = "SW3";
 			linux,code = <BTN_3>;
 			press-threshold-microvolt = <1700000>;
 		};
 	};

 	aliases {
 		serial0 = &uart_AO;
 		ethernet0 = &ethmac;
 	};

 	chosen {
 		stdout-path = "serial0:115200n8";
 	};

 	emmc_pwrseq: emmc-pwrseq {
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
 	};

 	gpio-keys {
 		compatible = "gpio-keys";

 		key {
 			label = "SW1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
 			interrupt-parent = <&gpio_intc>;
 			interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>;
 		};
 	};

 	hdmi-connector {
 		compatible = "hdmi-connector";
 		type = "a";

 		port {
 			hdmi_connector_in: endpoint {
 				remote-endpoint = <&hdmi_tx_tmds_out>;
 			};
 		};
 	};

 	leds {
 		compatible = "gpio-leds";

 		led-green {
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
 		};

 		led-blue {
 			color = <LED_COLOR_ID_BLUE>;
 			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 	};

 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};

 	emmc_1v8: regulator-emmc_1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "EMMC_1V8";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		vin-supply = <&vddao_3v3>;
 		regulator-always-on;
 	};

 	dc_in: regulator-dc_in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		regulator-always-on;
 	};

 	vddio_c: regulator-vddio_c {
 		compatible = "regulator-gpio";
 		regulator-name = "VDDIO_C";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;

 		enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;

 		gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>;
 		gpios-states = <1>;

 		states = <1800000 0>,
 			 <3300000 1>;
 	};

 	tflash_vdd: regulator-tflash_vdd {
 		compatible = "regulator-fixed";
 		regulator-name = "TFLASH_VDD";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&dc_in>;
 		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 	};

 	vddao_1v8: regulator-vddao_1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_1V8";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		vin-supply = <&vddao_3v3>;
 		regulator-always-on;
 	};

 	vddao_3v3: regulator-vddao_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&dc_in>;
 		regulator-always-on;
 	};

 	vddcpu: regulator-vddcpu {
 		/*
 		 * SY8120B1ABC DC/DC Regulator.
 		 */
 		compatible = "pwm-regulator";

 		regulator-name = "VDDCPU";
 		regulator-min-microvolt = <690000>;
 		regulator-max-microvolt = <1050000>;

 		pwm-supply = <&dc_in>;

 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;

 		regulator-boot-on;
 		regulator-always-on;
 	};

 	/* USB Hub Power Enable */
 	vl_pwr_en: regulator-vl_pwr_en {
 		compatible = "regulator-fixed";
 		regulator-name = "VL_PWR_EN";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		vin-supply = <&dc_in>;

 		gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };

 &arb {
 	status = "okay";
 };

 &cpu0 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
 	clock-latency = <50000>;
 };

 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
 	clock-latency = <50000>;
 };

 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
 	clock-latency = <50000>;
 };

 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
 	clock-latency = <50000>;
 };

 &ext_mdio {
 	external_phy: ethernet-phy@0 {
 		/* Realtek RTL8211F (0x001cc916) */
 		reg = <0>;
 		max-speed = <1000>;

 		interrupt-parent = <&gpio_intc>;
 		/* MAC_INTR on GPIOZ_14 */
 		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
 	};
 };

 &ethmac {
 	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
 	pinctrl-names = "default";
 	status = "okay";
 	phy-mode = "rgmii-txid";
 	phy-handle = <&external_phy>;
 };

 &gpio {
 	gpio-line-names =
 		/* GPIOZ */
 		"ETH_MDIO", /* GPIOZ_0 */
 		"ETH_MDC", /* GPIOZ_1 */
 		"ETH_RXCLK", /* GPIOZ_2 */
 		"ETH_RX_DV", /* GPIOZ_3 */
 		"ETH_RXD0", /* GPIOZ_4 */
 		"ETH_RXD1", /* GPIOZ_5 */
 		"ETH_RXD2", /* GPIOZ_6 */
 		"ETH_RXD3", /* GPIOZ_7 */
 		"ETH_TXCLK", /* GPIOZ_8 */
 		"ETH_TXEN", /* GPIOZ_9 */
 		"ETH_TXD0", /* GPIOZ_10 */
 		"ETH_TXD1", /* GPIOZ_11 */
 		"ETH_TXD2", /* GPIOZ_12 */
 		"ETH_TXD3", /* GPIOZ_13 */
 		"ETH_INTR", /* GPIOZ_14 */
 		"ETH_NRST", /* GPIOZ_15 */
 		/* GPIOH */
 		"HDMI_SDA", /* GPIOH_0 */
 		"HDMI_SCL", /* GPIOH_1 */
 		"HDMI_HPD", /* GPIOH_2 */
 		"HDMI_CEC", /* GPIOH_3 */
 		"VL-RST_N", /* GPIOH_4 */
 		"CON1-P36", /* GPIOH_5 */
 		"VL-PWREN", /* GPIOH_6 */
 		"WiFi_3V3_1V8", /* GPIOH_7 */
 		"TFLASH_VDD_EN", /* GPIOH_8 */
 		/* BOOT */
 		"eMMC_D0", /* BOOT_0 */
 		"eMMC_D1", /* BOOT_1 */
 		"eMMC_D2", /* BOOT_2 */
 		"eMMC_D3", /* BOOT_3 */
 		"eMMC_D4", /* BOOT_4 */
 		"eMMC_D5", /* BOOT_5 */
 		"eMMC_D6", /* BOOT_6 */
 		"eMMC_D7", /* BOOT_7 */
 		"eMMC_CLK", /* BOOT_8 */
 		"",
 		"eMMC_CMD", /* BOOT_10 */
 		"",
 		"eMMC_RST#", /* BOOT_12 */
 		"eMMC_DS", /* BOOT_13 */
 		"", "",
 		/* GPIOC */
 		"SD_D0_B", /* GPIOC_0 */
 		"SD_D1_B", /* GPIOC_1 */
 		"SD_D2_B", /* GPIOC_2 */
 		"SD_D3_B", /* GPIOC_3 */
 		"SD_CLK_B", /* GPIOC_4 */
 		"SD_CMD_B", /* GPIOC_5 */
 		"CARD_EN_DET", /* GPIOC_6 */
 		"",
 		/* GPIOA */
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "",
 		"CON1-P27", /* GPIOA_14 */
 		"CON1-P28", /* GPIOA_15 */
 		/* GPIOX */
 		"CON1-P16", /* GPIOX_0 */
 		"CON1-P18", /* GPIOX_1 */
 		"CON1-P22", /* GPIOX_2 */
 		"CON1-P11", /* GPIOX_3 */
 		"CON1-P13", /* GPIOX_4 */
 		"CON1-P07", /* GPIOX_5 */
 		"CON1-P33", /* GPIOX_6 */
 		"CON1-P15", /* GPIOX_7 */
 		"CON1-P19", /* GPIOX_8 */
 		"CON1-P21", /* GPIOX_9 */
 		"CON1-P24", /* GPIOX_10 */
 		"CON1-P23", /* GPIOX_11 */
 		"CON1-P08", /* GPIOX_12 */
 		"CON1-P10", /* GPIOX_13 */
 		"CON1-P29", /* GPIOX_14 */
 		"CON1-P31", /* GPIOX_15 */
 		"CON1-P26", /* GPIOX_16 */
 		"CON1-P03", /* GPIOX_17 */
 		"CON1-P05", /* GPIOX_18 */
 		"CON1-P32"; /* GPIOX_19 */

 	/*
 	 * WARNING: The USB Hub needs a reset signal to be turned high in
 	 * order to be detected by the USB Controller. This signal should
 	 * be handled by a USB specific power sequence to reset the Hub
 	 * when the USB bus is powered down.
 	 */
 	usb-hub-hog {
 		gpio-hog;
 		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "usb-hub-reset";
 	};
 };

 &gpio_ao {
 	gpio-line-names =
 		/* GPIOAO */
 		"DEBUG TX", /* GPIOAO_0 */
 		"DEBUG RX", /* GPIOAO_1 */
 		"SYS_LED2", /* GPIOAO_2 */
 		"UPDATE_KEY", /* GPIOAO_3 */
 		"CON1-P40", /* GPIOAO_4 */
 		"IR_IN", /* GPIOAO_5 */
 		"TF_3V3N_1V8_EN", /* GPIOAO_6 */
 		"CON1-P35", /* GPIOAO_7 */
 		"CON1-P12", /* GPIOAO_8 */
 		"CON1-P37", /* GPIOAO_9 */
 		"CON1-P38", /* GPIOAO_10 */
 		"SYS_LED", /* GPIOAO_11 */
 		/* GPIOE */
 		"VDDEE_PWM", /* GPIOE_0 */
 		"VDDCPU_PWM", /* GPIOE_1 */
 		"TF_PWR_EN"; /* GPIOE_2 */
 };

 &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
 	pinctrl-names = "default";
 	hdmi-supply = <&dc_in>;
 };

 &hdmi_tx_tmds_port {
 	hdmi_tx_tmds_out: endpoint {
 		remote-endpoint = <&hdmi_connector_in>;
 	};
 };

 &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
 };

 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
 	clocks = <&xtal>;
 	clock-names = "clkin1";
 	status = "okay";
 };

 &saradc {
 	status = "okay";
 	vref-supply = <&vddao_1v8>;
 };

 /* SD card */
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_c_pins>;
 	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
 	pinctrl-names = "default", "clk-gate";

 	bus-width = <4>;
 	cap-sd-highspeed;
 	max-frequency = <50000000>;
 	disable-wp;

 	/* TOFIX: SD card is barely usable in SDR modes */

 	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&tflash_vdd>;
 	vqmmc-supply = <&vddio_c>;
 };

 /* eMMC */
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
 	pinctrl-1 = <&emmc_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";

 	bus-width = <8>;
 	cap-mmc-highspeed;
 	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	max-frequency = <200000000>;
 	disable-wp;

 	mmc-pwrseq = <&emmc_pwrseq>;
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&emmc_1v8>;
 };

 &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };

 &usb {
 	status = "okay";
 };

 &usb2_phy0 {
 	phy-supply = <&dc_in>;
 };

 &usb2_phy1 {
 	/* Enable the hub which is connected to this port */
 	phy-supply = <&vl_pwr_en>;
 };
	// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
	/*
	* Copyright (c) 2021 BayLibre SAS
	* Author: Neil Armstrong <narmstrong@baylibre.com>
	*/

	#include "meson-sm1.dtsi"
	#include <dt-bindings/leds/common.h>
	#include <dt-bindings/input/linux-event-codes.h>
	#include <dt-bindings/gpio/meson-g12a-gpio.h>

	/ {
	adc-keys {
	compatible = "adc-keys";
	io-channels = <&saradc 2>;
	io-channel-names = "buttons";
	keyup-threshold-microvolt = <1800000>;

	button-sw3 {
	label = "SW3";
	linux,code = <BTN_3>;
	press-threshold-microvolt = <1700000>;
	};
	};

	aliases {
	serial0 = &uart_AO;
	ethernet0 = &ethmac;
	};

	chosen {
	stdout-path = "serial0:115200n8";
	};

	emmc_pwrseq: emmc-pwrseq {
	compatible = "mmc-pwrseq-emmc";
	reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
	};

	gpio-keys {
	compatible = "gpio-keys";

	key {
	label = "SW1";
	linux,code = <BTN_1>;
	gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
	interrupt-parent = <&gpio_intc>;
	interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>;
	};
	};

	hdmi-connector {
	compatible = "hdmi-connector";
	type = "a";

	port {
	hdmi_connector_in: endpoint {
	remote-endpoint = <&hdmi_tx_tmds_out>;
	};
	};
	};

	leds {
	compatible = "gpio-leds";

	led-green {
	color = <LED_COLOR_ID_GREEN>;
	function = LED_FUNCTION_STATUS;
	gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
	};

	led-blue {
	color = <LED_COLOR_ID_BLUE>;
	function = LED_FUNCTION_STATUS;
	gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>;
	linux,default-trigger = "heartbeat";
	};
	};

	memory@0 {
	device_type = "memory";
	reg = <0x0 0x0 0x0 0x40000000>;
	};

	emmc_1v8: regulator-emmc_1v8 {
	compatible = "regulator-fixed";
	regulator-name = "EMMC_1V8";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	vin-supply = <&vddao_3v3>;
	regulator-always-on;
	};

	dc_in: regulator-dc_in {
	compatible = "regulator-fixed";
	regulator-name = "DC_IN";
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	regulator-always-on;
	};

	vddio_c: regulator-vddio_c {
	compatible = "regulator-gpio";
	regulator-name = "VDDIO_C";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <3300000>;

	enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
	enable-active-high;
	regulator-always-on;

	gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>;
	gpios-states = <1>;

	states = <1800000 0>,
	<3300000 1>;
	};

	tflash_vdd: regulator-tflash_vdd {
	compatible = "regulator-fixed";
	regulator-name = "TFLASH_VDD";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	vin-supply = <&dc_in>;
	gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
	enable-active-high;
	regulator-always-on;
	};

	vddao_1v8: regulator-vddao_1v8 {
	compatible = "regulator-fixed";
	regulator-name = "VDDAO_1V8";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	vin-supply = <&vddao_3v3>;
	regulator-always-on;
	};

	vddao_3v3: regulator-vddao_3v3 {
	compatible = "regulator-fixed";
	regulator-name = "VDDAO_3V3";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	vin-supply = <&dc_in>;
	regulator-always-on;
	};

	vddcpu: regulator-vddcpu {
	/*
	* SY8120B1ABC DC/DC Regulator.
	*/
	compatible = "pwm-regulator";

	regulator-name = "VDDCPU";
	regulator-min-microvolt = <690000>;
	regulator-max-microvolt = <1050000>;

	pwm-supply = <&dc_in>;

	pwms = <&pwm_AO_cd 1 1250 0>;
	pwm-dutycycle-range = <100 0>;

	regulator-boot-on;
	regulator-always-on;
	};

	/* USB Hub Power Enable */
	vl_pwr_en: regulator-vl_pwr_en {
	compatible = "regulator-fixed";
	regulator-name = "VL_PWR_EN";
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	vin-supply = <&dc_in>;

	gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
	enable-active-high;
	};
	};

	&arb {
	status = "okay";
	};

	&cpu0 {
	cpu-supply = <&vddcpu>;
	operating-points-v2 = <&cpu_opp_table>;
	clocks = <&clkc CLKID_CPU_CLK>;
	clock-latency = <50000>;
	};

	&cpu1 {
	cpu-supply = <&vddcpu>;
	operating-points-v2 = <&cpu_opp_table>;
	clocks = <&clkc CLKID_CPU1_CLK>;
	clock-latency = <50000>;
	};

	&cpu2 {
	cpu-supply = <&vddcpu>;
	operating-points-v2 = <&cpu_opp_table>;
	clocks = <&clkc CLKID_CPU2_CLK>;
	clock-latency = <50000>;
	};

	&cpu3 {
	cpu-supply = <&vddcpu>;
	operating-points-v2 = <&cpu_opp_table>;
	clocks = <&clkc CLKID_CPU3_CLK>;
	clock-latency = <50000>;
	};

	&ext_mdio {
	external_phy: ethernet-phy@0 {
	/* Realtek RTL8211F (0x001cc916) */
	reg = <0>;
	max-speed = <1000>;

	interrupt-parent = <&gpio_intc>;
	/* MAC_INTR on GPIOZ_14 */
	interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
	};
	};

	&ethmac {
	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
	pinctrl-names = "default";
	status = "okay";
	phy-mode = "rgmii-txid";
	phy-handle = <&external_phy>;
	};

	&gpio {
	gpio-line-names =
	/* GPIOZ */
	"ETH_MDIO", /* GPIOZ_0 */
	"ETH_MDC", /* GPIOZ_1 */
	"ETH_RXCLK", /* GPIOZ_2 */
	"ETH_RX_DV", /* GPIOZ_3 */
	"ETH_RXD0", /* GPIOZ_4 */
	"ETH_RXD1", /* GPIOZ_5 */
	"ETH_RXD2", /* GPIOZ_6 */
	"ETH_RXD3", /* GPIOZ_7 */
	"ETH_TXCLK", /* GPIOZ_8 */
	"ETH_TXEN", /* GPIOZ_9 */
	"ETH_TXD0", /* GPIOZ_10 */
	"ETH_TXD1", /* GPIOZ_11 */
	"ETH_TXD2", /* GPIOZ_12 */
	"ETH_TXD3", /* GPIOZ_13 */
	"ETH_INTR", /* GPIOZ_14 */
	"ETH_NRST", /* GPIOZ_15 */
	/* GPIOH */
	"HDMI_SDA", /* GPIOH_0 */
	"HDMI_SCL", /* GPIOH_1 */
	"HDMI_HPD", /* GPIOH_2 */
	"HDMI_CEC", /* GPIOH_3 */
	"VL-RST_N", /* GPIOH_4 */
	"CON1-P36", /* GPIOH_5 */
	"VL-PWREN", /* GPIOH_6 */
	"WiFi_3V3_1V8", /* GPIOH_7 */
	"TFLASH_VDD_EN", /* GPIOH_8 */
	/* BOOT */
	"eMMC_D0", /* BOOT_0 */
	"eMMC_D1", /* BOOT_1 */
	"eMMC_D2", /* BOOT_2 */
	"eMMC_D3", /* BOOT_3 */
	"eMMC_D4", /* BOOT_4 */
	"eMMC_D5", /* BOOT_5 */
	"eMMC_D6", /* BOOT_6 */
	"eMMC_D7", /* BOOT_7 */
	"eMMC_CLK", /* BOOT_8 */
	"",
	"eMMC_CMD", /* BOOT_10 */
	"",
	"eMMC_RST#", /* BOOT_12 */
	"eMMC_DS", /* BOOT_13 */
	"", "",
	/* GPIOC */
	"SD_D0_B", /* GPIOC_0 */
	"SD_D1_B", /* GPIOC_1 */
	"SD_D2_B", /* GPIOC_2 */
	"SD_D3_B", /* GPIOC_3 */
	"SD_CLK_B", /* GPIOC_4 */
	"SD_CMD_B", /* GPIOC_5 */
	"CARD_EN_DET", /* GPIOC_6 */
	"",
	/* GPIOA */
	"", "", "", "", "", "", "", "",
	"", "", "", "", "", "",
	"CON1-P27", /* GPIOA_14 */
	"CON1-P28", /* GPIOA_15 */
	/* GPIOX */
	"CON1-P16", /* GPIOX_0 */
	"CON1-P18", /* GPIOX_1 */
	"CON1-P22", /* GPIOX_2 */
	"CON1-P11", /* GPIOX_3 */
	"CON1-P13", /* GPIOX_4 */
	"CON1-P07", /* GPIOX_5 */
	"CON1-P33", /* GPIOX_6 */
	"CON1-P15", /* GPIOX_7 */
	"CON1-P19", /* GPIOX_8 */
	"CON1-P21", /* GPIOX_9 */
	"CON1-P24", /* GPIOX_10 */
	"CON1-P23", /* GPIOX_11 */
	"CON1-P08", /* GPIOX_12 */
	"CON1-P10", /* GPIOX_13 */
	"CON1-P29", /* GPIOX_14 */
	"CON1-P31", /* GPIOX_15 */
	"CON1-P26", /* GPIOX_16 */
	"CON1-P03", /* GPIOX_17 */
	"CON1-P05", /* GPIOX_18 */
	"CON1-P32"; /* GPIOX_19 */

	/*
	* WARNING: The USB Hub needs a reset signal to be turned high in
	* order to be detected by the USB Controller. This signal should
	* be handled by a USB specific power sequence to reset the Hub
	* when the USB bus is powered down.
	*/
	usb-hub-hog {
	gpio-hog;
	gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
	output-high;
	line-name = "usb-hub-reset";
	};
	};

	&gpio_ao {
	gpio-line-names =
	/* GPIOAO */
	"DEBUG TX", /* GPIOAO_0 */
	"DEBUG RX", /* GPIOAO_1 */
	"SYS_LED2", /* GPIOAO_2 */
	"UPDATE_KEY", /* GPIOAO_3 */
	"CON1-P40", /* GPIOAO_4 */
	"IR_IN", /* GPIOAO_5 */
	"TF_3V3N_1V8_EN", /* GPIOAO_6 */
	"CON1-P35", /* GPIOAO_7 */
	"CON1-P12", /* GPIOAO_8 */
	"CON1-P37", /* GPIOAO_9 */
	"CON1-P38", /* GPIOAO_10 */
	"SYS_LED", /* GPIOAO_11 */
	/* GPIOE */
	"VDDEE_PWM", /* GPIOE_0 */
	"VDDCPU_PWM", /* GPIOE_1 */
	"TF_PWR_EN"; /* GPIOE_2 */
	};

	&hdmi_tx {
	status = "okay";
	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
	pinctrl-names = "default";
	hdmi-supply = <&dc_in>;
	};

	&hdmi_tx_tmds_port {
	hdmi_tx_tmds_out: endpoint {
	remote-endpoint = <&hdmi_connector_in>;
	};
	};

	&ir {
	status = "okay";
	pinctrl-0 = <&remote_input_ao_pins>;
	pinctrl-names = "default";
	};

	&pwm_AO_cd {
	pinctrl-0 = <&pwm_ao_d_e_pins>;
	pinctrl-names = "default";
	clocks = <&xtal>;
	clock-names = "clkin1";
	status = "okay";
	};

	&saradc {
	status = "okay";
	vref-supply = <&vddao_1v8>;
	};

	/* SD card */
	&sd_emmc_b {
	status = "okay";
	pinctrl-0 = <&sdcard_c_pins>;
	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
	pinctrl-names = "default", "clk-gate";

	bus-width = <4>;
	cap-sd-highspeed;
	max-frequency = <50000000>;
	disable-wp;

	/* TOFIX: SD card is barely usable in SDR modes */

	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
	vmmc-supply = <&tflash_vdd>;
	vqmmc-supply = <&vddio_c>;
	};

	/* eMMC */
	&sd_emmc_c {
	status = "okay";
	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
	pinctrl-1 = <&emmc_clk_gate_pins>;
	pinctrl-names = "default", "clk-gate";

	bus-width = <8>;
	cap-mmc-highspeed;
	mmc-ddr-1_8v;
	mmc-hs200-1_8v;
	max-frequency = <200000000>;
	disable-wp;

	mmc-pwrseq = <&emmc_pwrseq>;
	vmmc-supply = <&vddao_3v3>;
	vqmmc-supply = <&emmc_1v8>;
	};

	&uart_AO {
	status = "okay";
	pinctrl-0 = <&uart_ao_a_pins>;
	pinctrl-names = "default";
	};

	&usb {
	status = "okay";
	};

	&usb2_phy0 {
	phy-supply = <&dc_in>;
	};

	&usb2_phy1 {
	/* Enable the hub which is connected to this port */
	phy-supply = <&vl_pwr_en>;
	};