| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (c) 2023 SberDevices |
| * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru> |
| */ |
| |
| /dts-v1/; |
| |
| #include "meson-a1.dtsi" |
| |
| / { |
| compatible = "amlogic,ad402", "amlogic,a1"; |
| model = "Amlogic Meson A1 AD402 Development Board"; |
| |
| aliases { |
| serial0 = &uart_AO_B; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x0 0x0 0x8000000>; |
| }; |
| |
| reserved-memory { |
| /* 3 MiB reserved for Amlogic Trust OS (BL32) */ |
| secos_reserved: secos@3d00000 { |
| reg = <0x0 0x03d00000 0x0 0x300000>; |
| no-map; |
| }; |
| }; |
| |
| firmware { |
| optee { |
| compatible = "linaro,optee-tz"; |
| method = "smc"; |
| }; |
| }; |
| |
| battery_4v2: regulator-battery-4v2 { |
| compatible = "regulator-fixed"; |
| regulator-name = "4V2"; |
| regulator-min-microvolt = <4200000>; |
| regulator-max-microvolt = <4200000>; |
| regulator-always-on; |
| }; |
| |
| vddq_1v35: regulator-vddq-1v35 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDDQ_1V35"; |
| regulator-min-microvolt = <1350000>; |
| regulator-max-microvolt = <1350000>; |
| vin-supply = <&battery_4v2>; |
| regulator-always-on; |
| }; |
| |
| vddao_3v3: regulator-vddao-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDDAO_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&battery_4v2>; |
| regulator-always-on; |
| }; |
| |
| vcc_3v3: regulator-vcc-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VCC_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&vddao_3v3>; |
| regulator-always-on; |
| }; |
| |
| vddio_1v8: regulator-vddio-1v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDDIO_1V8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| vin-supply = <&vddao_3v3>; |
| regulator-always-on; |
| }; |
| }; |
| |
| /* Bluetooth HCI H4 */ |
| &uart_AO { |
| status = "okay"; |
| pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; |
| pinctrl-names = "default"; |
| }; |
| |
| &uart_AO_B { |
| status = "okay"; |
| }; |
| |
| &saradc { |
| status = "okay"; |
| vref-supply = <&vddio_1v8>; |
| }; |
| |
| &spifc { |
| status = "okay"; |
| pinctrl-0 = <&spifc_pins>; |
| pinctrl-names = "default"; |
| |
| spi_nand@0 { |
| compatible = "spi-nand"; |
| status = "okay"; |
| reg = <0>; |
| spi-max-frequency = <96000000>; |
| spi-tx-bus-width = <4>; |
| spi-rx-bus-width = <4>; |
| }; |
| }; |
| |
| &usb2_phy1 { |
| phy-supply = <&vcc_3v3>; |
| }; |
| |
| &usb { |
| status = "okay"; |
| dr_mode = "peripheral"; |
| }; |
| |
| &sd_emmc { |
| status = "okay"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pinctrl-0 = <&sdio_pins>; |
| pinctrl-1 = <&sdio_clk_gate_pins>; |
| pinctrl-names = "default", "clk-gate"; |
| |
| bus-width = <4>; |
| cap-sd-highspeed; |
| sd-uhs-sdr104; |
| max-frequency = <200000000>; |
| non-removable; |
| disable-wp; |
| |
| vmmc-supply = <&vddao_3v3>; |
| vqmmc-supply = <&vddio_1v8>; |
| }; |