arch/x86/lib/bios_asm.S - filogic/uboot - Gitiles

 /* SPDX-License-Identifier: GPL-2.0 */
 /*
  * From coreboot x86_asm.S, cleaned up substantially
  *
  * Copyright (C) 2009-2010 coresystems GmbH
  */

 #include <asm/processor.h>
 #include <asm/processor-flags.h>
 #include "bios.h"

 #define SEG(segment)	$segment * X86_GDT_ENTRY_SIZE

 /*
  * This is the interrupt handler stub code. It gets copied to the IDT and
  * to some fixed addresses in the F segment. Before the code can used,
  * it gets patched up by the C function copying it: byte 3 (the $0 in
  * movb $0, %al) is overwritten with the interrupt numbers.
  */

 	.code16
 	.globl __idt_handler
 __idt_handler:
 	pushal
 	movb	$0, %al /* This instruction gets modified */
 	ljmp	$0, $__interrupt_handler_16bit
 	.globl __idt_handler_size
 __idt_handler_size:
 	.long  . - __idt_handler

 .macro setup_registers
 	/* initial register values */
 	movl	44(%ebp), %eax
 	movl	%eax, __registers +  0 /* eax */
 	movl	48(%ebp), %eax
 	movl	%eax, __registers +  4 /* ebx */
 	movl	52(%ebp), %eax
 	movl	%eax, __registers +  8 /* ecx */
 	movl	56(%ebp), %eax
 	movl	%eax, __registers + 12 /* edx */
 	movl	60(%ebp), %eax
 	movl	%eax, __registers + 16 /* esi */
 	movl	64(%ebp), %eax
 	movl	%eax, __registers + 20 /* edi */
 .endm

 .macro	enter_real_mode
 	/* Activate the right segment descriptor real mode. */
 	ljmp	SEG(X86_GDT_ENTRY_16BIT_CS), $PTR_TO_REAL_MODE(1f)
 1:
 .code16
 	/*
 	 * Load the segment registers with properly configured segment
 	 * descriptors. They will retain these configurations (limits,
 	 * writability, etc.) once protected mode is turned off.
 	 */
 	mov	SEG(X86_GDT_ENTRY_16BIT_DS), %ax
 	mov	%ax, %ds
 	mov	%ax, %es
 	mov	%ax, %fs
 	mov	%ax, %gs
 	mov	%ax, %ss

 	/* Turn off protection */
 	movl	%cr0, %eax
 	andl	$~X86_CR0_PE, %eax
 	movl	%eax, %cr0

 	/* Now really going into real mode */
 	ljmp	$0, $PTR_TO_REAL_MODE(1f)
 1:
 	/*
 	 * Set up a stack: Put the stack at the end of page zero. That way
 	 * we can easily share it between real and protected, since the
 	 * 16-bit ESP at segment 0 will work for any case.
 	 */
 	mov	$0x0, %ax
 	mov	%ax, %ss

 	/* Load 16 bit IDT */
 	xor	%ax, %ax
 	mov	%ax, %ds
 	lidt	__realmode_idt

 .endm

 .macro	prepare_for_irom
 	movl	$0x1000, %eax
 	movl	%eax, %esp

 	/* Initialise registers for option rom lcall */
 	movl	__registers +  0, %eax
 	movl	__registers +  4, %ebx
 	movl	__registers +  8, %ecx
 	movl	__registers + 12, %edx
 	movl	__registers + 16, %esi
 	movl	__registers + 20, %edi

 	/* Set all segments to 0x0000, ds to 0x0040 */
 	push	%ax
 	xor	%ax, %ax
 	mov	%ax, %es
 	mov	%ax, %fs
 	mov	%ax, %gs
 	mov	SEG(X86_GDT_ENTRY_16BIT_FLAT_DS), %ax
 	mov	%ax, %ds
 	pop	%ax

 .endm

 .macro	enter_protected_mode
 	/* Go back to protected mode */
 	movl	%cr0, %eax
 	orl	$X86_CR0_PE, %eax
 	movl	%eax, %cr0

 	/* Now that we are in protected mode jump to a 32 bit code segment */
 	data32	ljmp	SEG(X86_GDT_ENTRY_32BIT_CS), $PTR_TO_REAL_MODE(1f)
 1:
 	.code32
 	mov	SEG(X86_GDT_ENTRY_32BIT_DS), %ax
 	mov	%ax, %ds
 	mov	%ax, %es
 	mov	%ax, %gs
 	mov	%ax, %ss
 	mov	SEG(X86_GDT_ENTRY_32BIT_FS), %ax
 	mov	%ax, %fs

 	/* restore proper idt */
 	lidt	idt_ptr
 .endm

 /*
  * In order to be independent of U-Boot's position in RAM we relocate a part
  * of the code to the first megabyte of RAM, so the CPU can use it in
  * real-mode. This code lives at asm_realmode_code.
  */
 	.globl asm_realmode_code
 asm_realmode_code:

 /* Realmode IDT pointer structure. */
 __realmode_idt = PTR_TO_REAL_MODE(.)
 	.word 1023	/* 16 bit limit */
 	.long 0		/* 24 bit base */
 	.word 0

 /* Preserve old stack */
 __stack = PTR_TO_REAL_MODE(.)
 	.long 0

 /* Register store for realmode_call and realmode_interrupt */
 __registers = PTR_TO_REAL_MODE(.)
 	.long 0 /*  0 - EAX */
 	.long 0 /*  4 - EBX */
 	.long 0 /*  8 - ECX */
 	.long 0 /* 12 - EDX */
 	.long 0 /* 16 - ESI */
 	.long 0 /* 20 - EDI */

 /* 256 byte buffer, used by int10 */
 	.globl asm_realmode_buffer
 asm_realmode_buffer:
 	.skip 256

 	.code32
 	.globl asm_realmode_call
 asm_realmode_call:
 	/* save all registers to the stack */
 	pusha
 	pushf
 	movl	%esp, __stack
 	movl	%esp, %ebp

 	/*
 	 * This function is called with regparm=0 and we have to skip the
 	 * 36 bytes from pushf+pusha. Hence start at 40.
 	 * Set up our call instruction.
 	 */
 	movl	40(%ebp), %eax
 	mov	%ax, __lcall_instr + 1
 	andl	$0xffff0000, %eax
 	shrl	$4, %eax
 	mov	%ax, __lcall_instr + 3

 	wbinvd

 	setup_registers
 	enter_real_mode
 	prepare_for_irom

 __lcall_instr = PTR_TO_REAL_MODE(.)
 	.byte 0x9a
 	.word 0x0000, 0x0000

 	enter_protected_mode

 	/* restore stack pointer, eflags and register values and exit */
 	movl	__stack, %esp
 	popf
 	popa
 	ret

 	.globl __realmode_interrupt
 __realmode_interrupt:
 	/* save all registers to the stack and store the stack pointer */
 	pusha
 	pushf
 	movl	%esp, __stack
 	movl	%esp, %ebp

 	/*
 	 * This function is called with regparm=0 and we have to skip the
 	 * 36 bytes from pushf+pusha. Hence start at 40.
 	 * Prepare interrupt calling code.
 	 */
 	movl	40(%ebp), %eax
 	movb	%al, __intXX_instr + 1 /* intno */

 	setup_registers
 	enter_real_mode
 	prepare_for_irom

 __intXX_instr = PTR_TO_REAL_MODE(.)
 	.byte 0xcd, 0x00 /* This becomes intXX */

 	enter_protected_mode

 	/* restore stack pointer, eflags and register values and exit */
 	movl	__stack, %esp
 	popf
 	popa
 	ret

 /*
  * This is the 16-bit interrupt entry point called by the IDT stub code.
  *
  * Before this code code is called, %eax is pushed to the stack, and the
  * interrupt number is loaded into %al. On return this function cleans up
  * for its caller.
  */
 	.code16
 __interrupt_handler_16bit = PTR_TO_REAL_MODE(.)
 	push	%ds
 	push	%es
 	push	%fs
 	push	%gs

 	/* Save real mode SS */
 	movw	%ss, %cs:__realmode_ss

 	/* Clear DF to not break ABI assumptions */
 	cld

 	/*
 	 * Clean up the interrupt number. We could do this in the stub, but
 	 * it would cost two more bytes per stub entry.
 	 */
 	andl	$0xff, %eax
 	pushl	%eax		/* ... and make it the first parameter */

 	enter_protected_mode

 	/*
 	 * Now we are in protected mode. We need compute the right ESP based
 	 * on saved real mode SS otherwise interrupt_handler() won't get
 	 * correct parameters from the stack.
 	 */
 	movzwl	%cs:__realmode_ss, %ecx
 	shll	$4, %ecx
 	addl	%ecx, %esp

 	/* Call the C interrupt handler */
 	movl	$interrupt_handler, %eax
 	call	*%eax

 	/* Restore real mode ESP based on saved SS */
 	movzwl	%cs:__realmode_ss, %ecx
 	shll	$4, %ecx
 	subl	%ecx, %esp

 	enter_real_mode

 	/* Restore real mode SS */
 	movw	%cs:__realmode_ss, %ss

 	/*
 	 * Restore all registers, including those manipulated by the C
 	 * handler
 	 */
 	popl	%eax
 	pop	%gs
 	pop	%fs
 	pop	%es
 	pop	%ds
 	popal
 	iret

 __realmode_ss = PTR_TO_REAL_MODE(.)
 	.word	0

 	.globl asm_realmode_code_size
 asm_realmode_code_size:
 	.long  . - asm_realmode_code
	/* SPDX-License-Identifier: GPL-2.0 */
	/*
	* From coreboot x86_asm.S, cleaned up substantially
	*
	* Copyright (C) 2009-2010 coresystems GmbH
	*/

	#include <asm/processor.h>
	#include <asm/processor-flags.h>
	#include "bios.h"

	#define SEG(segment) $segment * X86_GDT_ENTRY_SIZE

	/*
	* This is the interrupt handler stub code. It gets copied to the IDT and
	* to some fixed addresses in the F segment. Before the code can used,
	* it gets patched up by the C function copying it: byte 3 (the $0 in
	* movb $0, %al) is overwritten with the interrupt numbers.
	*/

	.code16
	.globl __idt_handler
	__idt_handler:
	pushal
	movb $0, %al /* This instruction gets modified */
	ljmp $0, $__interrupt_handler_16bit
	.globl __idt_handler_size
	__idt_handler_size:
	.long . - __idt_handler

	.macro setup_registers
	/* initial register values */
	movl 44(%ebp), %eax
	movl %eax, __registers + 0 /* eax */
	movl 48(%ebp), %eax
	movl %eax, __registers + 4 /* ebx */
	movl 52(%ebp), %eax
	movl %eax, __registers + 8 /* ecx */
	movl 56(%ebp), %eax
	movl %eax, __registers + 12 /* edx */
	movl 60(%ebp), %eax
	movl %eax, __registers + 16 /* esi */
	movl 64(%ebp), %eax
	movl %eax, __registers + 20 /* edi */
	.endm

	.macro enter_real_mode
	/* Activate the right segment descriptor real mode. */
	ljmp SEG(X86_GDT_ENTRY_16BIT_CS), $PTR_TO_REAL_MODE(1f)
	1:
	.code16
	/*
	* Load the segment registers with properly configured segment
	* descriptors. They will retain these configurations (limits,
	* writability, etc.) once protected mode is turned off.
	*/
	mov SEG(X86_GDT_ENTRY_16BIT_DS), %ax
	mov %ax, %ds
	mov %ax, %es
	mov %ax, %fs
	mov %ax, %gs
	mov %ax, %ss

	/* Turn off protection */
	movl %cr0, %eax
	andl $~X86_CR0_PE, %eax
	movl %eax, %cr0

	/* Now really going into real mode */
	ljmp $0, $PTR_TO_REAL_MODE(1f)
	1:
	/*
	* Set up a stack: Put the stack at the end of page zero. That way
	* we can easily share it between real and protected, since the
	* 16-bit ESP at segment 0 will work for any case.
	*/
	mov $0x0, %ax
	mov %ax, %ss

	/* Load 16 bit IDT */
	xor %ax, %ax
	mov %ax, %ds
	lidt __realmode_idt

	.endm

	.macro prepare_for_irom
	movl $0x1000, %eax
	movl %eax, %esp

	/* Initialise registers for option rom lcall */
	movl __registers + 0, %eax
	movl __registers + 4, %ebx
	movl __registers + 8, %ecx
	movl __registers + 12, %edx
	movl __registers + 16, %esi
	movl __registers + 20, %edi

	/* Set all segments to 0x0000, ds to 0x0040 */
	push %ax
	xor %ax, %ax
	mov %ax, %es
	mov %ax, %fs
	mov %ax, %gs
	mov SEG(X86_GDT_ENTRY_16BIT_FLAT_DS), %ax
	mov %ax, %ds
	pop %ax

	.endm

	.macro enter_protected_mode
	/* Go back to protected mode */
	movl %cr0, %eax
	orl $X86_CR0_PE, %eax
	movl %eax, %cr0

	/* Now that we are in protected mode jump to a 32 bit code segment */
	data32 ljmp SEG(X86_GDT_ENTRY_32BIT_CS), $PTR_TO_REAL_MODE(1f)
	1:
	.code32
	mov SEG(X86_GDT_ENTRY_32BIT_DS), %ax
	mov %ax, %ds
	mov %ax, %es
	mov %ax, %gs
	mov %ax, %ss
	mov SEG(X86_GDT_ENTRY_32BIT_FS), %ax
	mov %ax, %fs

	/* restore proper idt */
	lidt idt_ptr
	.endm

	/*
	* In order to be independent of U-Boot's position in RAM we relocate a part
	* of the code to the first megabyte of RAM, so the CPU can use it in
	* real-mode. This code lives at asm_realmode_code.
	*/
	.globl asm_realmode_code
	asm_realmode_code:

	/* Realmode IDT pointer structure. */
	__realmode_idt = PTR_TO_REAL_MODE(.)
	.word 1023 /* 16 bit limit */
	.long 0 /* 24 bit base */
	.word 0

	/* Preserve old stack */
	__stack = PTR_TO_REAL_MODE(.)
	.long 0

	/* Register store for realmode_call and realmode_interrupt */
	__registers = PTR_TO_REAL_MODE(.)
	.long 0 /* 0 - EAX */
	.long 0 /* 4 - EBX */
	.long 0 /* 8 - ECX */
	.long 0 /* 12 - EDX */
	.long 0 /* 16 - ESI */
	.long 0 /* 20 - EDI */

	/* 256 byte buffer, used by int10 */
	.globl asm_realmode_buffer
	asm_realmode_buffer:
	.skip 256

	.code32
	.globl asm_realmode_call
	asm_realmode_call:
	/* save all registers to the stack */
	pusha
	pushf
	movl %esp, __stack
	movl %esp, %ebp

	/*
	* This function is called with regparm=0 and we have to skip the
	* 36 bytes from pushf+pusha. Hence start at 40.
	* Set up our call instruction.
	*/
	movl 40(%ebp), %eax
	mov %ax, __lcall_instr + 1
	andl $0xffff0000, %eax
	shrl $4, %eax
	mov %ax, __lcall_instr + 3

	wbinvd

	setup_registers
	enter_real_mode
	prepare_for_irom

	__lcall_instr = PTR_TO_REAL_MODE(.)
	.byte 0x9a
	.word 0x0000, 0x0000

	enter_protected_mode

	/* restore stack pointer, eflags and register values and exit */
	movl __stack, %esp
	popf
	popa
	ret

	.globl __realmode_interrupt
	__realmode_interrupt:
	/* save all registers to the stack and store the stack pointer */
	pusha
	pushf
	movl %esp, __stack
	movl %esp, %ebp

	/*
	* This function is called with regparm=0 and we have to skip the
	* 36 bytes from pushf+pusha. Hence start at 40.
	* Prepare interrupt calling code.
	*/
	movl 40(%ebp), %eax
	movb %al, __intXX_instr + 1 /* intno */

	setup_registers
	enter_real_mode
	prepare_for_irom

	__intXX_instr = PTR_TO_REAL_MODE(.)
	.byte 0xcd, 0x00 /* This becomes intXX */

	enter_protected_mode

	/* restore stack pointer, eflags and register values and exit */
	movl __stack, %esp
	popf
	popa
	ret

	/*
	* This is the 16-bit interrupt entry point called by the IDT stub code.
	*
	* Before this code code is called, %eax is pushed to the stack, and the
	* interrupt number is loaded into %al. On return this function cleans up
	* for its caller.
	*/
	.code16
	__interrupt_handler_16bit = PTR_TO_REAL_MODE(.)
	push %ds
	push %es
	push %fs
	push %gs

	/* Save real mode SS */
	movw %ss, %cs:__realmode_ss

	/* Clear DF to not break ABI assumptions */
	cld

	/*
	* Clean up the interrupt number. We could do this in the stub, but
	* it would cost two more bytes per stub entry.
	*/
	andl $0xff, %eax
	pushl %eax /* ... and make it the first parameter */

	enter_protected_mode

	/*
	* Now we are in protected mode. We need compute the right ESP based
	* on saved real mode SS otherwise interrupt_handler() won't get
	* correct parameters from the stack.
	*/
	movzwl %cs:__realmode_ss, %ecx
	shll $4, %ecx
	addl %ecx, %esp

	/* Call the C interrupt handler */
	movl $interrupt_handler, %eax
	call *%eax

	/* Restore real mode ESP based on saved SS */
	movzwl %cs:__realmode_ss, %ecx
	shll $4, %ecx
	subl %ecx, %esp

	enter_real_mode

	/* Restore real mode SS */
	movw %cs:__realmode_ss, %ss

	/*
	* Restore all registers, including those manipulated by the C
	* handler
	*/
	popl %eax
	pop %gs
	pop %fs
	pop %es
	pop %ds
	popal
	iret

	__realmode_ss = PTR_TO_REAL_MODE(.)
	.word 0

	.globl asm_realmode_code_size
	asm_realmode_code_size:
	.long . - asm_realmode_code