drivers/pci/pci_ftpci100.c - filogic/uboot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Faraday FTPCI100 PCI Bridge Controller Device Driver Implementation
  *
  * Copyright (C) 2011 Andes Technology Corporation
  * Gavin Guo, Andes Technology Corporation <gavinguo@andestech.com>
  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
  */
 #include <common.h>
 #include <init.h>
 #include <malloc.h>
 #include <pci.h>

 #include <faraday/ftpci100.h>

 #include <asm/io.h>
 #include <asm/types.h> /* u32, u16.... used by pci.h */

 struct ftpci100_data {
 	unsigned int reg_base;
 	unsigned int io_base;
 	unsigned int mem_base;
 	unsigned int mmio_base;
 	unsigned int ndevs;
 };

 static struct pci_config devs[FTPCI100_MAX_FUNCTIONS];
 static struct pci_controller local_hose;

 static void setup_pci_bar(unsigned int bus, unsigned int dev, unsigned func,
 		unsigned char header, struct ftpci100_data *priv)
 {
 	struct pci_controller *hose = (struct pci_controller *)&local_hose;
 	unsigned int i, tmp32, bar_no, iovsmem = 1;
 	pci_dev_t dev_nu;

 	/* A device is present, add an entry to the array */
 	devs[priv->ndevs].bus = bus;
 	devs[priv->ndevs].dev = dev;
 	devs[priv->ndevs].func = func;

 	dev_nu = PCI_BDF(bus, dev, func);

 	if ((header & 0x7f) == 0x01)
 		/* PCI-PCI Bridge */
 		bar_no = 2;
 	else
 		bar_no = 6;

 	/* Allocate address spaces by configuring BARs */
 	for (i = 0; i < bar_no; i++) {
 		pci_hose_write_config_dword(hose, dev_nu,
 					PCI_BASE_ADDRESS_0 + i * 4, 0xffffffff);
 		pci_hose_read_config_dword(hose, dev_nu,
 					PCI_BASE_ADDRESS_0 + i * 4, &tmp32);

 		if (tmp32 == 0x0)
 			continue;

 		/* IO space */
 		if (tmp32 & 0x1) {
 			iovsmem = 0;
 			unsigned int size_mask = ~(tmp32 & 0xfffffffc);

 			if (priv->io_base & size_mask)
 				priv->io_base = (priv->io_base & ~size_mask) + \
 						 size_mask + 1;

 			devs[priv->ndevs].bar[i].addr = priv->io_base;
 			devs[priv->ndevs].bar[i].size = size_mask + 1;

 			pci_hose_write_config_dword(hose, dev_nu,
 					PCI_BASE_ADDRESS_0 + i * 4,
 					priv->io_base);

 			debug("Allocated IO address 0x%X-" \
 				"0x%X for Bus %d, Device %d, Function %d\n",
 				priv->io_base,
 				priv->io_base + size_mask, bus, dev, func);

 			priv->io_base += size_mask + 1;
 		} else {
 			/* Memory space */
 			unsigned int is_64bit = ((tmp32 & 0x6) == 0x4);
 			unsigned int is_pref = tmp32 & 0x8;
 			unsigned int size_mask = ~(tmp32 & 0xfffffff0);
 			unsigned int alloc_base;
 			unsigned int *addr_mem_base;

 			if (is_pref)
 				addr_mem_base = &priv->mem_base;
 			else
 				addr_mem_base = &priv->mmio_base;

 			alloc_base = *addr_mem_base;

 			if (alloc_base & size_mask)
 				alloc_base = (alloc_base & ~size_mask) \
 						+ size_mask + 1;

 			pci_hose_write_config_dword(hose, dev_nu,
 					PCI_BASE_ADDRESS_0 + i * 4, alloc_base);

 			debug("Allocated %s address 0x%X-" \
 				"0x%X for Bus %d, Device %d, Function %d\n",
 				is_pref ? "MEM" : "MMIO", alloc_base,
 				alloc_base + size_mask, bus, dev, func);

 			devs[priv->ndevs].bar[i].addr = alloc_base;
 			devs[priv->ndevs].bar[i].size = size_mask + 1;

 			debug("BAR address  BAR size\n");
 			debug("%010x  %08d\n",
 				devs[priv->ndevs].bar[0].addr,
 				devs[priv->ndevs].bar[0].size);

 			alloc_base += size_mask + 1;
 			*addr_mem_base = alloc_base;

 			if (is_64bit) {
 				i++;
 				pci_hose_write_config_dword(hose, dev_nu,
 					PCI_BASE_ADDRESS_0 + i * 4, 0x0);
 			}
 		}
 	}

 	/* Enable Bus Master, Memory Space, and IO Space */
 	pci_hose_read_config_dword(hose, dev_nu, PCI_CACHE_LINE_SIZE, &tmp32);
 	pci_hose_write_config_dword(hose, dev_nu, PCI_CACHE_LINE_SIZE, 0x08);
 	pci_hose_read_config_dword(hose, dev_nu, PCI_CACHE_LINE_SIZE, &tmp32);

 	pci_hose_read_config_dword(hose, dev_nu, PCI_COMMAND, &tmp32);

 	tmp32 &= 0xffff;

 	if (iovsmem == 0)
 		tmp32 |= 0x5;
 	else
 		tmp32 |= 0x6;

 	pci_hose_write_config_dword(hose, dev_nu, PCI_COMMAND, tmp32);
 }

 static void pci_bus_scan(struct ftpci100_data *priv)
 {
 	struct pci_controller *hose = (struct pci_controller *)&local_hose;
 	unsigned int bus, dev, func;
 	pci_dev_t dev_nu;
 	unsigned int data32;
 	unsigned int tmp;
 	unsigned char header;
 	unsigned char int_pin;
 	unsigned int niobars;
 	unsigned int nmbars;

 	priv->ndevs = 1;

 	nmbars = 0;
 	niobars = 0;

 	for (bus = 0; bus < MAX_BUS_NUM; bus++)
 		for (dev = 0; dev < MAX_DEV_NUM; dev++)
 			for (func = 0; func < MAX_FUN_NUM; func++) {
 				dev_nu = PCI_BDF(bus, dev, func);
 				pci_hose_read_config_dword(hose, dev_nu,
 							PCI_VENDOR_ID, &data32);

 				/*
 				 * some broken boards return 0 or ~0,
 				 * if a slot is empty.
 				 */
 				if (data32 == 0xffffffff ||
 					data32 == 0x00000000 ||
 					data32 == 0x0000ffff ||
 					data32 == 0xffff0000)
 					continue;

 				pci_hose_read_config_dword(hose, dev_nu,
 							PCI_HEADER_TYPE, &tmp);
 				header = (unsigned char)tmp;
 				setup_pci_bar(bus, dev, func, header, priv);

 				devs[priv->ndevs].v_id = (u16)(data32 & \
 								0x0000ffff);

 				devs[priv->ndevs].d_id = (u16)((data32 & \
 							0xffff0000) >> 16);

 				/* Figure out what INTX# line the card uses */
 				pci_hose_read_config_byte(hose, dev_nu,
 						PCI_INTERRUPT_PIN, &int_pin);

 				/* assign the appropriate irq line */
 				if (int_pin > PCI_IRQ_LINES) {
 					printf("more irq lines than expect\n");
 				} else if (int_pin != 0) {
 					/* This device uses an interrupt line */
 					devs[priv->ndevs].pin = int_pin;
 				}

 				pci_hose_read_config_dword(hose, dev_nu,
 						PCI_CLASS_DEVICE, &data32);

 				debug("%06d  %03d  %03d  " \
 					"%04d  %08x  %08x  " \
 					"%03d  %08x  %06d  %08x\n",
 					priv->ndevs, devs[priv->ndevs].bus,
 					devs[priv->ndevs].dev,
 					devs[priv->ndevs].func,
 					devs[priv->ndevs].d_id,
 					devs[priv->ndevs].v_id,
 					devs[priv->ndevs].pin,
 					devs[priv->ndevs].bar[0].addr,
 					devs[priv->ndevs].bar[0].size,
 					data32 >> 8);

 				priv->ndevs++;
 			}
 }

 static void ftpci_preinit(struct ftpci100_data *priv)
 {
 	struct ftpci100_ahbc *ftpci100;
 	struct pci_controller *hose = (struct pci_controller *)&local_hose;
 	u32 pci_config_addr;
 	u32 pci_config_data;

 	priv->reg_base = CONFIG_FTPCI100_BASE;
 	priv->io_base = CONFIG_FTPCI100_BASE + CONFIG_FTPCI100_IO_SIZE;
 	priv->mmio_base = CONFIG_FTPCI100_MEM_BASE;
 	priv->mem_base = CONFIG_FTPCI100_MEM_BASE + CONFIG_FTPCI100_MEM_SIZE;

 	ftpci100 = (struct ftpci100_ahbc *)priv->reg_base;

 	pci_config_addr = (u32) &ftpci100->conf;
 	pci_config_data = (u32) &ftpci100->data;

 	/* print device name */
 	printf("FTPCI100\n");

 	/* dump basic configuration */
 	debug("%s: Config addr is %08X, data port is %08X\n",
 		__func__, pci_config_addr, pci_config_data);

 	/* PCI memory space */
 	pci_set_region(hose->regions + 0,
 		CONFIG_PCI_MEM_BUS,
 		CONFIG_PCI_MEM_PHYS,
 		CONFIG_PCI_MEM_SIZE,
 		PCI_REGION_MEM);
 	hose->region_count++;

 	/* PCI IO space */
 	pci_set_region(hose->regions + 1,
 		CONFIG_PCI_IO_BUS,
 		CONFIG_PCI_IO_PHYS,
 		CONFIG_PCI_IO_SIZE,
 		PCI_REGION_IO);
 	hose->region_count++;

 #if defined(CONFIG_PCI_SYS_BUS)
 	/* PCI System Memory space */
 	pci_set_region(hose->regions + 2,
 		CONFIG_PCI_SYS_BUS,
 		CONFIG_PCI_SYS_PHYS,
 		CONFIG_PCI_SYS_SIZE,
 		PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
 	hose->region_count++;
 #endif

 	/* setup indirect read/write function */
 	pci_setup_indirect(hose, pci_config_addr, pci_config_data);

 	/* register hose */
 	pci_register_hose(hose);
 }

 void pci_ftpci_init(void)
 {
 	struct ftpci100_data *priv = NULL;
 	struct pci_controller *hose = (struct pci_controller *)&local_hose;
 	pci_dev_t bridge_num;

 	struct pci_device_id bridge_ids[] = {
 		{FTPCI100_BRIDGE_VENDORID, FTPCI100_BRIDGE_DEVICEID},
 		{0, 0}
 	};

 	priv = malloc(sizeof(struct ftpci100_data));

 	if (!priv) {
 		printf("%s(): failed to malloc priv\n", __func__);
 		return;
 	}

 	memset(priv, 0, sizeof(struct ftpci100_data));

 	ftpci_preinit(priv);

 	debug("Device  bus  dev  func  deviceID  vendorID  pin  address" \
 		"   size    class\n");

 	pci_bus_scan(priv);

 	/*
 	 * Setup the PCI Bridge Window to 1GB,
 	 * it will cause USB OHCI Host controller Unrecoverable Error
 	 * if it is not set.
 	 */
 	bridge_num = pci_find_devices(bridge_ids, 0);
 	if (bridge_num == -1) {
 		printf("PCI Bridge not found\n");
 		return;
 	}
 	pci_hose_write_config_dword(hose, bridge_num, PCI_MEM_BASE_SIZE1,
 					FTPCI100_BASE_ADR_SIZE(1024));
 }
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* Faraday FTPCI100 PCI Bridge Controller Device Driver Implementation
	*
	* Copyright (C) 2011 Andes Technology Corporation
	* Gavin Guo, Andes Technology Corporation <gavinguo@andestech.com>
	* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
	*/
	#include <common.h>
	#include <init.h>
	#include <malloc.h>
	#include <pci.h>

	#include <faraday/ftpci100.h>

	#include <asm/io.h>
	#include <asm/types.h> /* u32, u16.... used by pci.h */

	struct ftpci100_data {
	unsigned int reg_base;
	unsigned int io_base;
	unsigned int mem_base;
	unsigned int mmio_base;
	unsigned int ndevs;
	};

	static struct pci_config devs[FTPCI100_MAX_FUNCTIONS];
	static struct pci_controller local_hose;

	static void setup_pci_bar(unsigned int bus, unsigned int dev, unsigned func,
	unsigned char header, struct ftpci100_data *priv)
	{
	struct pci_controller hose = (struct pci_controller )&local_hose;
	unsigned int i, tmp32, bar_no, iovsmem = 1;
	pci_dev_t dev_nu;

	/* A device is present, add an entry to the array */
	devs[priv->ndevs].bus = bus;
	devs[priv->ndevs].dev = dev;
	devs[priv->ndevs].func = func;

	dev_nu = PCI_BDF(bus, dev, func);

	if ((header & 0x7f) == 0x01)
	/* PCI-PCI Bridge */
	bar_no = 2;
	else
	bar_no = 6;

	/* Allocate address spaces by configuring BARs */
	for (i = 0; i < bar_no; i++) {
	pci_hose_write_config_dword(hose, dev_nu,
	PCI_BASE_ADDRESS_0 + i * 4, 0xffffffff);
	pci_hose_read_config_dword(hose, dev_nu,
	PCI_BASE_ADDRESS_0 + i * 4, &tmp32);

	if (tmp32 == 0x0)
	continue;

	/* IO space */
	if (tmp32 & 0x1) {
	iovsmem = 0;
	unsigned int size_mask = ~(tmp32 & 0xfffffffc);

	if (priv->io_base & size_mask)
	priv->io_base = (priv->io_base & ~size_mask) + \
	size_mask + 1;

	devs[priv->ndevs].bar[i].addr = priv->io_base;
	devs[priv->ndevs].bar[i].size = size_mask + 1;

	pci_hose_write_config_dword(hose, dev_nu,
	PCI_BASE_ADDRESS_0 + i * 4,
	priv->io_base);

	debug("Allocated IO address 0x%X-" \
	"0x%X for Bus %d, Device %d, Function %d\n",
	priv->io_base,
	priv->io_base + size_mask, bus, dev, func);

	priv->io_base += size_mask + 1;
	} else {
	/* Memory space */
	unsigned int is_64bit = ((tmp32 & 0x6) == 0x4);
	unsigned int is_pref = tmp32 & 0x8;
	unsigned int size_mask = ~(tmp32 & 0xfffffff0);
	unsigned int alloc_base;
	unsigned int *addr_mem_base;

	if (is_pref)
	addr_mem_base = &priv->mem_base;
	else
	addr_mem_base = &priv->mmio_base;

	alloc_base = *addr_mem_base;

	if (alloc_base & size_mask)
	alloc_base = (alloc_base & ~size_mask) \
	+ size_mask + 1;

	pci_hose_write_config_dword(hose, dev_nu,
	PCI_BASE_ADDRESS_0 + i * 4, alloc_base);

	debug("Allocated %s address 0x%X-" \
	"0x%X for Bus %d, Device %d, Function %d\n",
	is_pref ? "MEM" : "MMIO", alloc_base,
	alloc_base + size_mask, bus, dev, func);

	devs[priv->ndevs].bar[i].addr = alloc_base;
	devs[priv->ndevs].bar[i].size = size_mask + 1;

	debug("BAR address BAR size\n");
	debug("%010x %08d\n",
	devs[priv->ndevs].bar[0].addr,
	devs[priv->ndevs].bar[0].size);

	alloc_base += size_mask + 1;
	*addr_mem_base = alloc_base;

	if (is_64bit) {
	i++;
	pci_hose_write_config_dword(hose, dev_nu,
	PCI_BASE_ADDRESS_0 + i * 4, 0x0);
	}
	}
	}

	/* Enable Bus Master, Memory Space, and IO Space */
	pci_hose_read_config_dword(hose, dev_nu, PCI_CACHE_LINE_SIZE, &tmp32);
	pci_hose_write_config_dword(hose, dev_nu, PCI_CACHE_LINE_SIZE, 0x08);
	pci_hose_read_config_dword(hose, dev_nu, PCI_CACHE_LINE_SIZE, &tmp32);

	pci_hose_read_config_dword(hose, dev_nu, PCI_COMMAND, &tmp32);

	tmp32 &= 0xffff;

	if (iovsmem == 0)
	tmp32 \|= 0x5;
	else
	tmp32 \|= 0x6;

	pci_hose_write_config_dword(hose, dev_nu, PCI_COMMAND, tmp32);
	}

	static void pci_bus_scan(struct ftpci100_data *priv)
	{
	struct pci_controller hose = (struct pci_controller )&local_hose;
	unsigned int bus, dev, func;
	pci_dev_t dev_nu;
	unsigned int data32;
	unsigned int tmp;
	unsigned char header;
	unsigned char int_pin;
	unsigned int niobars;
	unsigned int nmbars;

	priv->ndevs = 1;

	nmbars = 0;
	niobars = 0;

	for (bus = 0; bus < MAX_BUS_NUM; bus++)
	for (dev = 0; dev < MAX_DEV_NUM; dev++)
	for (func = 0; func < MAX_FUN_NUM; func++) {
	dev_nu = PCI_BDF(bus, dev, func);
	pci_hose_read_config_dword(hose, dev_nu,
	PCI_VENDOR_ID, &data32);

	/*
	* some broken boards return 0 or ~0,
	* if a slot is empty.
	*/
	if (data32 == 0xffffffff \|\|
	data32 == 0x00000000 \|\|
	data32 == 0x0000ffff \|\|
	data32 == 0xffff0000)
	continue;

	pci_hose_read_config_dword(hose, dev_nu,
	PCI_HEADER_TYPE, &tmp);
	header = (unsigned char)tmp;
	setup_pci_bar(bus, dev, func, header, priv);

	devs[priv->ndevs].v_id = (u16)(data32 & \
	0x0000ffff);

	devs[priv->ndevs].d_id = (u16)((data32 & \
	0xffff0000) >> 16);

	/* Figure out what INTX# line the card uses */
	pci_hose_read_config_byte(hose, dev_nu,
	PCI_INTERRUPT_PIN, &int_pin);

	/* assign the appropriate irq line */
	if (int_pin > PCI_IRQ_LINES) {
	printf("more irq lines than expect\n");
	} else if (int_pin != 0) {
	/* This device uses an interrupt line */
	devs[priv->ndevs].pin = int_pin;
	}

	pci_hose_read_config_dword(hose, dev_nu,
	PCI_CLASS_DEVICE, &data32);

	debug("%06d %03d %03d " \
	"%04d %08x %08x " \
	"%03d %08x %06d %08x\n",
	priv->ndevs, devs[priv->ndevs].bus,
	devs[priv->ndevs].dev,
	devs[priv->ndevs].func,
	devs[priv->ndevs].d_id,
	devs[priv->ndevs].v_id,
	devs[priv->ndevs].pin,
	devs[priv->ndevs].bar[0].addr,
	devs[priv->ndevs].bar[0].size,
	data32 >> 8);

	priv->ndevs++;
	}
	}

	static void ftpci_preinit(struct ftpci100_data *priv)
	{
	struct ftpci100_ahbc *ftpci100;
	struct pci_controller hose = (struct pci_controller )&local_hose;
	u32 pci_config_addr;
	u32 pci_config_data;

	priv->reg_base = CONFIG_FTPCI100_BASE;
	priv->io_base = CONFIG_FTPCI100_BASE + CONFIG_FTPCI100_IO_SIZE;
	priv->mmio_base = CONFIG_FTPCI100_MEM_BASE;
	priv->mem_base = CONFIG_FTPCI100_MEM_BASE + CONFIG_FTPCI100_MEM_SIZE;

	ftpci100 = (struct ftpci100_ahbc *)priv->reg_base;

	pci_config_addr = (u32) &ftpci100->conf;
	pci_config_data = (u32) &ftpci100->data;

	/* print device name */
	printf("FTPCI100\n");

	/* dump basic configuration */
	debug("%s: Config addr is %08X, data port is %08X\n",
	__func__, pci_config_addr, pci_config_data);

	/* PCI memory space */
	pci_set_region(hose->regions + 0,
	CONFIG_PCI_MEM_BUS,
	CONFIG_PCI_MEM_PHYS,
	CONFIG_PCI_MEM_SIZE,
	PCI_REGION_MEM);
	hose->region_count++;

	/* PCI IO space */
	pci_set_region(hose->regions + 1,
	CONFIG_PCI_IO_BUS,
	CONFIG_PCI_IO_PHYS,
	CONFIG_PCI_IO_SIZE,
	PCI_REGION_IO);
	hose->region_count++;

	#if defined(CONFIG_PCI_SYS_BUS)
	/* PCI System Memory space */
	pci_set_region(hose->regions + 2,
	CONFIG_PCI_SYS_BUS,
	CONFIG_PCI_SYS_PHYS,
	CONFIG_PCI_SYS_SIZE,
	PCI_REGION_MEM \| PCI_REGION_SYS_MEMORY);
	hose->region_count++;
	#endif

	/* setup indirect read/write function */
	pci_setup_indirect(hose, pci_config_addr, pci_config_data);

	/* register hose */
	pci_register_hose(hose);
	}

	void pci_ftpci_init(void)
	{
	struct ftpci100_data *priv = NULL;
	struct pci_controller hose = (struct pci_controller )&local_hose;
	pci_dev_t bridge_num;

	struct pci_device_id bridge_ids[] = {
	{FTPCI100_BRIDGE_VENDORID, FTPCI100_BRIDGE_DEVICEID},
	{0, 0}
	};

	priv = malloc(sizeof(struct ftpci100_data));

	if (!priv) {
	printf("%s(): failed to malloc priv\n", __func__);
	return;
	}

	memset(priv, 0, sizeof(struct ftpci100_data));

	ftpci_preinit(priv);

	debug("Device bus dev func deviceID vendorID pin address" \
	" size class\n");

	pci_bus_scan(priv);

	/*
	* Setup the PCI Bridge Window to 1GB,
	* it will cause USB OHCI Host controller Unrecoverable Error
	* if it is not set.
	*/
	bridge_num = pci_find_devices(bridge_ids, 0);
	if (bridge_num == -1) {
	printf("PCI Bridge not found\n");
	return;
	}
	pci_hose_write_config_dword(hose, bridge_num, PCI_MEM_BASE_SIZE1,
	FTPCI100_BASE_ADR_SIZE(1024));
	}