include/configs/vct.h - filogic/uboot - Gitiles

 /*
  * (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 /*
  * This file contains the configuration parameters for the VCT board
  * family:
  *
  * vct_premium
  * vct_premium_small
  * vct_premium_onenand
  * vct_premium_onenand_small
  * vct_platinum
  * vct_platinum_small
  * vct_platinum_onenand
  * vct_platinum_onenand_small
  * vct_platinumavc
  * vct_platinumavc_small
  * vct_platinumavc_onenand
  * vct_platinumavc_onenand_small
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #define CPU_CLOCK_RATE			324000000 /* Clock for the MIPS core */
 #define CONFIG_SYS_MIPS_TIMER_FREQ	(CPU_CLOCK_RATE / 2)

 #define CONFIG_SKIP_LOWLEVEL_INIT	/* SDRAM is initialized by the bootstrap code */

 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)
 #define CONFIG_SYS_MALLOC_LEN		(1 << 20)
 #define CONFIG_SYS_BOOTPARAMS_LEN	(128 << 10)
 #define CONFIG_SYS_INIT_SP_OFFSET	0x400000

 #if !defined(CONFIG_VCT_NAND) && !defined(CONFIG_VCT_ONENAND)
 #define CONFIG_VCT_NOR
 #endif

 /*
  * UART
  */
 #ifdef CONFIG_VCT_PLATINUMAVC
 #define UART_1_BASE		0xBDC30000
 #else
 #define UART_1_BASE		0xBF89C000
 #endif

 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	-4
 #define CONFIG_SYS_NS16550_COM1		UART_1_BASE
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_SYS_NS16550_CLK		921600

 /*
  * SDRAM
  */
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 #define CONFIG_SYS_MBYTES_SDRAM		128
 #define CONFIG_SYS_MEMTEST_START	0x80200000
 #define CONFIG_SYS_MEMTEST_END		0x80400000
 #define CONFIG_SYS_LOAD_ADDR		0x80400000	/* default load address */

 #if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)
 /*
  * SMSC91C11x Network Card
  */
 #define CONFIG_SMC911X
 #define CONFIG_SMC911X_BASE	0x00000000
 #define CONFIG_SMC911X_32_BIT
 #define CONFIG_NET_RETRY_COUNT		20
 #endif

 /*
  * Commands
  */

 /*
  * Only Premium/Platinum have ethernet support right now
  */
 #if (defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)) && \
 	!defined(CONFIG_VCT_SMALL_IMAGE)
 #endif

 /*
  * Only Premium/Platinum have USB-EHCI support right now
  */
 #if (defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)) && \
 	!defined(CONFIG_VCT_SMALL_IMAGE)
 #endif

 #if defined(CONFIG_CMD_USB)
 #define CONFIG_SUPPORT_VFAT

 /*
  * USB/EHCI
  */
 #define CONFIG_USB_EHCI_VCT		/* on VCT platform		*/
 #define CONFIG_EHCI_MMIO_BIG_ENDIAN
 #define CONFIG_EHCI_DESC_BIG_ENDIAN
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */
 #endif /* CONFIG_CMD_USB */

 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 #define CONFIG_BOOTP_SUBNETMASK

 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
 #define CONFIG_SYS_CBSIZE	512		/* Console I/O Buffer Size	*/
 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
 				 sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
 #define CONFIG_TIMESTAMP			/* Print image info with timestamp */
 #define CONFIG_CMDLINE_EDITING			/* add command line history	*/

 /*
  * FLASH and environment organization
  */
 #if defined(CONFIG_VCT_NOR)
 #define CONFIG_FLASH_NOT_MEM_MAPPED

 /*
  * We need special accessor functions for the CFI FLASH driver. This
  * can be enabled via the CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS option.
  */
 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS

 /*
  * For the non-memory-mapped NOR FLASH, we need to define the
  * NOR FLASH area. This can't be detected via the addr2info()
  * function, since we check for flash access in the very early
  * U-Boot code, before the NOR FLASH is detected.
  */
 #define CONFIG_FLASH_BASE		0xb0000000
 #define CONFIG_FLASH_END		0xbfffffff

 /*
  * CFI driver settings
  */
 #define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
 #define CONFIG_SYS_FLASH_CFI_AMD_RESET	1	/* Use AMD (Spansion) reset cmd */
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT	/* no byte writes on IXP4xx	*/

 #define CONFIG_SYS_FLASH_BASE		0xb0000000
 #define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE }
 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
 #define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/

 #define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

 #ifdef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_SECT_SIZE	0x10000		/* size of one complete sector	*/
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 #define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/

 /* Address and size of Redundant Environment Sector	*/
 #define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 #endif /* CONFIG_ENV_IS_IN_FLASH */
 #endif /* CONFIG_VCT_NOR */

 #if defined(CONFIG_VCT_ONENAND)
 #define CONFIG_USE_ONENAND_BOARD_INIT
 #define	CONFIG_SYS_ONENAND_BASE		0x00000000	/* this is not real address */
 #define CONFIG_SYS_FLASH_BASE		0x00000000
 #define CONFIG_ENV_ADDR			(128 << 10)	/* after compr. U-Boot image */
 #define	CONFIG_ENV_SIZE			(128 << 10)	/* erase size */
 #endif /* CONFIG_VCT_ONENAND */

 /*
  * I2C/EEPROM
  */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
 #define CONFIG_SYS_I2C_SOFT_SPEED	83000	/* 83 kHz is supposed to work */
 #define CONFIG_SYS_I2C_SOFT_SLAVE	0x7f

 /*
  * Software (bit-bang) I2C driver configuration
  */
 #define CONFIG_SYS_GPIO_I2C_SCL		11
 #define CONFIG_SYS_GPIO_I2C_SDA		10

 #ifndef __ASSEMBLY__
 int vct_gpio_dir(int pin, int dir);
 void vct_gpio_set(int pin, int val);
 int vct_gpio_get(int pin);
 #endif

 #define I2C_INIT	vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SCL, 1)
 #define I2C_ACTIVE	vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 1)
 #define I2C_TRISTATE	vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 0)
 #define I2C_READ	vct_gpio_get(CONFIG_SYS_GPIO_I2C_SDA)
 #define I2C_SDA(bit)	vct_gpio_set(CONFIG_SYS_GPIO_I2C_SDA, bit)
 #define I2C_SCL(bit)	vct_gpio_set(CONFIG_SYS_GPIO_I2C_SCL, bit)
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */

 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
 /* CAT24WC32 */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2	/* Bytes of address		*/
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5	/* The Catalyst CAT24WC32 has	*/
 					/* 32 byte page write mode using*/
 					/* last 5 bits of the address	*/
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */

 #define CONFIG_BOOTCOMMAND	"run test3"

 /*
  * UBI configuration
  */
 #if defined(CONFIG_VCT_ONENAND)
 #define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS

 #define MTDIDS_DEFAULT		"onenand0=onenand"
 #define MTDPARTS_DEFAULT	"mtdparts=onenand:128k(u-boot),"	\
 					"128k(env),"		\
 					"20m(kernel),"		\
 					"-(rootfs)"
 #endif

 /*
  * We need a small, stripped down image to fit into the first 128k OneNAND
  * erase block (gzipped). This image only needs basic commands for FLASH
  * (NOR/OneNAND) usage and Linux kernel booting.
  */
 #if defined(CONFIG_VCT_SMALL_IMAGE)
 #undef CONFIG_CMD_TERMINAL

 #undef CONFIG_SMC911X
 #undef CONFIG_SYS_I2C_SOFT
 #undef CONFIG_SOURCE
 #undef CONFIG_SYS_LONGHELP
 #undef CONFIG_TIMESTAMP
 #endif /* CONFIG_VCT_SMALL_IMAGE */

 #endif  /* __CONFIG_H */
	/*
	* (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	/*
	* This file contains the configuration parameters for the VCT board
	* family:
	*
	* vct_premium
	* vct_premium_small
	* vct_premium_onenand
	* vct_premium_onenand_small
	* vct_platinum
	* vct_platinum_small
	* vct_platinum_onenand
	* vct_platinum_onenand_small
	* vct_platinumavc
	* vct_platinumavc_small
	* vct_platinumavc_onenand
	* vct_platinumavc_onenand_small
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#define CPU_CLOCK_RATE 324000000 /* Clock for the MIPS core */
	#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2)

	#define CONFIG_SKIP_LOWLEVEL_INIT /* SDRAM is initialized by the bootstrap code */

	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
	#define CONFIG_SYS_MONITOR_LEN (256 << 10)
	#define CONFIG_SYS_MALLOC_LEN (1 << 20)
	#define CONFIG_SYS_BOOTPARAMS_LEN (128 << 10)
	#define CONFIG_SYS_INIT_SP_OFFSET 0x400000

	#if !defined(CONFIG_VCT_NAND) && !defined(CONFIG_VCT_ONENAND)
	#define CONFIG_VCT_NOR
	#endif

	/*
	* UART
	*/
	#ifdef CONFIG_VCT_PLATINUMAVC
	#define UART_1_BASE 0xBDC30000
	#else
	#define UART_1_BASE 0xBF89C000
	#endif

	#define CONFIG_SYS_NS16550_SERIAL
	#define CONFIG_SYS_NS16550_REG_SIZE -4
	#define CONFIG_SYS_NS16550_COM1 UART_1_BASE
	#define CONFIG_CONS_INDEX 1
	#define CONFIG_SYS_NS16550_CLK 921600

	/*
	* SDRAM
	*/
	#define CONFIG_SYS_SDRAM_BASE 0x80000000
	#define CONFIG_SYS_MBYTES_SDRAM 128
	#define CONFIG_SYS_MEMTEST_START 0x80200000
	#define CONFIG_SYS_MEMTEST_END 0x80400000
	#define CONFIG_SYS_LOAD_ADDR 0x80400000 /* default load address */

	#if defined(CONFIG_VCT_PREMIUM) \|\| defined(CONFIG_VCT_PLATINUM)
	/*
	* SMSC91C11x Network Card
	*/
	#define CONFIG_SMC911X
	#define CONFIG_SMC911X_BASE 0x00000000
	#define CONFIG_SMC911X_32_BIT
	#define CONFIG_NET_RETRY_COUNT 20
	#endif

	/*
	* Commands
	*/

	/*
	* Only Premium/Platinum have ethernet support right now
	*/
	#if (defined(CONFIG_VCT_PREMIUM) \|\| defined(CONFIG_VCT_PLATINUM)) && \
	!defined(CONFIG_VCT_SMALL_IMAGE)
	#endif

	/*
	* Only Premium/Platinum have USB-EHCI support right now
	*/
	#if (defined(CONFIG_VCT_PREMIUM) \|\| defined(CONFIG_VCT_PLATINUM)) && \
	!defined(CONFIG_VCT_SMALL_IMAGE)
	#endif

	#if defined(CONFIG_CMD_USB)
	#define CONFIG_SUPPORT_VFAT

	/*
	* USB/EHCI
	*/
	#define CONFIG_USB_EHCI_VCT /* on VCT platform */
	#define CONFIG_EHCI_MMIO_BIG_ENDIAN
	#define CONFIG_EHCI_DESC_BIG_ENDIAN
	#define CONFIG_EHCI_IS_TDI
	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */
	#endif /* CONFIG_CMD_USB */

	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_BOOTFILESIZE
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME
	#define CONFIG_BOOTP_SUBNETMASK

	/*
	* Miscellaneous configurable options
	*/
	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	sizeof(CONFIG_SYS_PROMPT) + 16)
	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	#define CONFIG_TIMESTAMP /* Print image info with timestamp */
	#define CONFIG_CMDLINE_EDITING /* add command line history */

	/*
	* FLASH and environment organization
	*/
	#if defined(CONFIG_VCT_NOR)
	#define CONFIG_FLASH_NOT_MEM_MAPPED

	/*
	* We need special accessor functions for the CFI FLASH driver. This
	* can be enabled via the CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS option.
	*/
	#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS

	/*
	* For the non-memory-mapped NOR FLASH, we need to define the
	* NOR FLASH area. This can't be detected via the addr2info()
	* function, since we check for flash access in the very early
	* U-Boot code, before the NOR FLASH is detected.
	*/
	#define CONFIG_FLASH_BASE 0xb0000000
	#define CONFIG_FLASH_END 0xbfffffff

	/*
	* CFI driver settings
	*/
	#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
	#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
	#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */
	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */

	#define CONFIG_SYS_FLASH_BASE 0xb0000000
	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */

	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */

	#ifdef CONFIG_ENV_IS_IN_FLASH
	#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
	#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */

	/* Address and size of Redundant Environment Sector */
	#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
	#endif /* CONFIG_ENV_IS_IN_FLASH */
	#endif /* CONFIG_VCT_NOR */

	#if defined(CONFIG_VCT_ONENAND)
	#define CONFIG_USE_ONENAND_BOARD_INIT
	#define CONFIG_SYS_ONENAND_BASE 0x00000000 /* this is not real address */
	#define CONFIG_SYS_FLASH_BASE 0x00000000
	#define CONFIG_ENV_ADDR (128 << 10) /* after compr. U-Boot image */
	#define CONFIG_ENV_SIZE (128 << 10) /* erase size */
	#endif /* CONFIG_VCT_ONENAND */

	/*
	* I2C/EEPROM
	*/
	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
	#define CONFIG_SYS_I2C_SOFT_SPEED 83000 /* 83 kHz is supposed to work */
	#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7f

	/*
	* Software (bit-bang) I2C driver configuration
	*/
	#define CONFIG_SYS_GPIO_I2C_SCL 11
	#define CONFIG_SYS_GPIO_I2C_SDA 10

	#ifndef __ASSEMBLY__
	int vct_gpio_dir(int pin, int dir);
	void vct_gpio_set(int pin, int val);
	int vct_gpio_get(int pin);
	#endif

	#define I2C_INIT vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SCL, 1)
	#define I2C_ACTIVE vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 1)
	#define I2C_TRISTATE vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 0)
	#define I2C_READ vct_gpio_get(CONFIG_SYS_GPIO_I2C_SDA)
	#define I2C_SDA(bit) vct_gpio_set(CONFIG_SYS_GPIO_I2C_SDA, bit)
	#define I2C_SCL(bit) vct_gpio_set(CONFIG_SYS_GPIO_I2C_SCL, bit)
	#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */

	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	/* CAT24WC32 */
	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */
	/* 32 byte page write mode using*/
	/* last 5 bits of the address */
	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */

	#define CONFIG_BOOTCOMMAND "run test3"

	/*
	* UBI configuration
	*/
	#if defined(CONFIG_VCT_ONENAND)
	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
	#define CONFIG_MTD_PARTITIONS

	#define MTDIDS_DEFAULT "onenand0=onenand"
	#define MTDPARTS_DEFAULT "mtdparts=onenand:128k(u-boot)," \
	"128k(env)," \
	"20m(kernel)," \
	"-(rootfs)"
	#endif

	/*
	* We need a small, stripped down image to fit into the first 128k OneNAND
	* erase block (gzipped). This image only needs basic commands for FLASH
	* (NOR/OneNAND) usage and Linux kernel booting.
	*/
	#if defined(CONFIG_VCT_SMALL_IMAGE)
	#undef CONFIG_CMD_TERMINAL

	#undef CONFIG_SMC911X
	#undef CONFIG_SYS_I2C_SOFT
	#undef CONFIG_SOURCE
	#undef CONFIG_SYS_LONGHELP
	#undef CONFIG_TIMESTAMP
	#endif /* CONFIG_VCT_SMALL_IMAGE */

	#endif /* __CONFIG_H */