| /* |
| * (C) Copyright 2013 |
| * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc |
| * |
| * based on P1022DS.h |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #ifdef CONFIG_SDCARD |
| #define CONFIG_RAMBOOT_SDCARD |
| #endif |
| |
| #ifdef CONFIG_SPIFLASH |
| #define CONFIG_RAMBOOT_SPIFLASH |
| #endif |
| |
| /* High Level Configuration Options */ |
| #define CONFIG_CONTROLCENTERD |
| #define CONFIG_MP /* support multiple processors */ |
| |
| #define CONFIG_ENABLE_36BIT_PHYS |
| |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_ADDR_MAP |
| #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ |
| #endif |
| |
| #define CONFIG_L2_CACHE |
| #define CONFIG_BTB |
| |
| #define CONFIG_SYS_CLK_FREQ 66666600 |
| #define CONFIG_DDR_CLK_FREQ 66666600 |
| |
| #define CONFIG_SYS_RAMBOOT |
| |
| #ifdef CONFIG_TRAILBLAZER |
| |
| #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc |
| #define CONFIG_SYS_MONITOR_LEN (256 * 1024) |
| |
| /* |
| * Config the L2 Cache |
| */ |
| #define CONFIG_SYS_INIT_L2_ADDR 0xf8fc0000 |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8fc0000ull |
| #else |
| #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR |
| #endif |
| #define CONFIG_SYS_L2_SIZE (256 << 10) |
| #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) |
| |
| #else /* CONFIG_TRAILBLAZER */ |
| |
| #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc |
| #define CONFIG_SYS_MONITOR_LEN (512 * 1024) |
| |
| #endif /* CONFIG_TRAILBLAZER */ |
| |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE |
| #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) |
| |
| /* |
| * Memory map |
| * |
| * 0x0000_0000 0x3fff_ffff DDR 1G Cacheable |
| * 0xc000_0000 0xdfff_ffff PCI Express Mem 512M non-cacheable |
| * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable |
| * |
| * Localbus non-cacheable |
| * 0xe000_0000 0xe00f_ffff eLBC 1M non-cacheable |
| * 0xf8fc0000 0xf8ff_ffff L2 SRAM 256k Cacheable |
| * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 |
| * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable |
| */ |
| |
| #define CONFIG_SYS_INIT_RAM_LOCK |
| #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ |
| #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* used area in RAM */ |
| #define CONFIG_SYS_GBL_DATA_OFFSET \ |
| (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
| |
| #ifdef CONFIG_TRAILBLAZER |
| /* leave CCSRBAR at default, because u-boot expects it to be exactly there */ |
| #define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT |
| #else |
| #define CONFIG_SYS_CCSRBAR 0xffe00000 |
| #endif |
| #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR |
| #define CONFIG_SYS_MPC85xx_GPIO3_ADDR (CONFIG_SYS_CCSRBAR+0xf200) |
| |
| /* |
| * DDR Setup |
| */ |
| |
| #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 |
| #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE |
| #define CONFIG_SYS_SDRAM_SIZE 1024 |
| #define CONFIG_VERY_BIG_RAM |
| |
| #define CONFIG_DIMM_SLOTS_PER_CTLR 1 |
| #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) |
| |
| #define CONFIG_SYS_MEMTEST_START 0x00000000 |
| #define CONFIG_SYS_MEMTEST_END 0x3fffffff |
| |
| #ifdef CONFIG_TRAILBLAZER |
| #define CONFIG_SPD_EEPROM |
| #define SPD_EEPROM_ADDRESS 0x52 |
| /*#define CONFIG_FSL_DDR_INTERACTIVE*/ |
| #endif |
| |
| /* |
| * Local Bus Definitions |
| */ |
| |
| #define CONFIG_SYS_ELBC_BASE 0xe0000000 |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_ELBC_BASE_PHYS 0xfe0000000ull |
| #else |
| #define CONFIG_SYS_ELBC_BASE_PHYS CONFIG_SYS_ELBC_BASE |
| #endif |
| |
| #define CONFIG_UART_BR_PRELIM \ |
| (BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V) |
| #define CONFIG_UART_OR_PRELIM (OR_AM_32KB | 0xff7) |
| |
| #define CONFIG_SYS_BR0_PRELIM 0 /* CS0 was originally intended for FPGA */ |
| #define CONFIG_SYS_OR0_PRELIM 0 /* debugging, was never used */ |
| |
| #define CONFIG_SYS_BR1_PRELIM CONFIG_UART_BR_PRELIM |
| #define CONFIG_SYS_OR1_PRELIM CONFIG_UART_OR_PRELIM |
| |
| /* |
| * Serial Port |
| */ |
| #define CONFIG_CONS_INDEX 2 |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_REG_SIZE 1 |
| #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) |
| |
| #define CONFIG_SYS_BAUDRATE_TABLE \ |
| {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} |
| |
| #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) |
| #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) |
| |
| /* |
| * I2C |
| */ |
| #define CONFIG_SYS_I2C |
| #define CONFIG_SYS_I2C_FSL |
| #define CONFIG_SYS_FSL_I2C_SPEED 400000 |
| #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F |
| #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 |
| #define CONFIG_SYS_FSL_I2C2_SPEED 400000 |
| #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F |
| #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 |
| |
| #ifndef CONFIG_TRAILBLAZER |
| #endif |
| |
| #define CONFIG_PCA9698 /* NXP PCA9698 */ |
| |
| #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 |
| |
| #ifndef CONFIG_TRAILBLAZER |
| /* |
| * eSPI - Enhanced SPI |
| */ |
| #define CONFIG_HARD_SPI |
| |
| #define CONFIG_SF_DEFAULT_SPEED 10000000 |
| #define CONFIG_SF_DEFAULT_MODE 0 |
| #endif |
| |
| /* |
| * MMC |
| */ |
| #define CONFIG_FSL_ESDHC |
| #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR |
| |
| #ifndef CONFIG_TRAILBLAZER |
| |
| /* |
| * Video |
| */ |
| #define CONFIG_FSL_DIU_FB |
| #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) |
| |
| /* |
| * General PCI |
| * Memory space is mapped 1-1, but I/O space must start from 0. |
| */ |
| #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ |
| #define CONFIG_PCI_INDIRECT_BRIDGE |
| #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ |
| #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ |
| |
| #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ |
| #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ |
| |
| #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 |
| #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull |
| #else |
| #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 |
| #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 |
| #endif |
| #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ |
| #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 |
| #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull |
| #else |
| #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 |
| #endif |
| #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ |
| |
| /* |
| * SATA |
| */ |
| #define CONFIG_LBA48 |
| |
| #define CONFIG_SYS_SATA_MAX_DEVICE 2 |
| #define CONFIG_SATA1 |
| #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR |
| #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA |
| #define CONFIG_SATA2 |
| #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR |
| #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA |
| |
| /* |
| * Ethernet |
| */ |
| #define CONFIG_TSEC_ENET |
| |
| #define CONFIG_TSECV2 |
| |
| #define CONFIG_MII /* MII PHY management */ |
| #define CONFIG_TSEC1 1 |
| #define CONFIG_TSEC1_NAME "eTSEC1" |
| #define CONFIG_TSEC2 1 |
| #define CONFIG_TSEC2_NAME "eTSEC2" |
| |
| #define TSEC1_PHY_ADDR 0 |
| #define TSEC2_PHY_ADDR 1 |
| |
| #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) |
| #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) |
| |
| #define TSEC1_PHYIDX 0 |
| #define TSEC2_PHYIDX 0 |
| |
| #define CONFIG_ETHPRIME "eTSEC1" |
| |
| /* |
| * USB |
| */ |
| |
| #define CONFIG_HAS_FSL_DR_USB |
| #define CONFIG_USB_EHCI_FSL |
| #define CONFIG_EHCI_HCD_INIT_AFTER_RESET |
| |
| #endif /* CONFIG_TRAILBLAZER */ |
| |
| /* |
| * Environment |
| */ |
| #if defined(CONFIG_TRAILBLAZER) |
| #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ |
| #elif defined(CONFIG_RAMBOOT_SPIFLASH) |
| #define CONFIG_ENV_SPI_BUS 0 |
| #define CONFIG_ENV_SPI_CS 0 |
| #define CONFIG_ENV_SPI_MAX_HZ 10000000 |
| #define CONFIG_ENV_SPI_MODE 0 |
| #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ |
| #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ |
| #define CONFIG_ENV_SECT_SIZE 0x10000 |
| #elif defined(CONFIG_RAMBOOT_SDCARD) |
| #define CONFIG_FSL_FIXED_MMC_LOCATION |
| #define CONFIG_ENV_SIZE 0x2000 |
| #define CONFIG_SYS_MMC_ENV_DEV 0 |
| #endif |
| |
| #define CONFIG_SYS_EXTRA_ENV_RELOC |
| |
| /* |
| * Command line configuration. |
| */ |
| |
| #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ |
| |
| #ifndef CONFIG_TRAILBLAZER |
| /* |
| * Board initialisation callbacks |
| */ |
| #define CONFIG_BOARD_EARLY_INIT_R |
| #define CONFIG_MISC_INIT_R |
| #define CONFIG_LAST_STAGE_INIT |
| |
| #else /* CONFIG_TRAILBLAZER */ |
| |
| #define CONFIG_BOARD_EARLY_INIT_R |
| #define CONFIG_LAST_STAGE_INIT |
| |
| #endif /* CONFIG_TRAILBLAZER */ |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_HW_WATCHDOG |
| #define CONFIG_LOADS_ECHO |
| #define CONFIG_SYS_LOADS_BAUD_CHANGE |
| |
| /* |
| * For booting Linux, the board info and command line data |
| * have to be in the first 64 MB of memory, since this is |
| * the maximum mapped by the Linux kernel during initialization. |
| */ |
| #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Linux Memory map */ |
| #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ |
| |
| /* |
| * Environment Configuration |
| */ |
| |
| #ifdef CONFIG_TRAILBLAZER |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "mp_holdoff=1\0" |
| |
| #else |
| |
| #define CONFIG_HOSTNAME controlcenterd |
| #define CONFIG_ROOTPATH "/opt/nfsroot" |
| #define CONFIG_BOOTFILE "uImage" |
| #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP */ |
| |
| #define CONFIG_LOADADDR 1000000 |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "netdev=eth0\0" \ |
| "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ |
| "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ |
| "tftpflash=tftpboot $loadaddr $uboot && " \ |
| "protect off $ubootaddr +$filesize && " \ |
| "erase $ubootaddr +$filesize && " \ |
| "cp.b $loadaddr $ubootaddr $filesize && " \ |
| "protect on $ubootaddr +$filesize && " \ |
| "cmp.b $loadaddr $ubootaddr $filesize\0" \ |
| "consoledev=ttyS1\0" \ |
| "ramdiskaddr=2000000\0" \ |
| "ramdiskfile=rootfs.ext2.gz.uboot\0" \ |
| "fdtaddr=1e00000\0" \ |
| "fdtfile=controlcenterd.dtb\0" \ |
| "bdev=sda3\0" |
| |
| /* these are used and NUL-terminated in env_default.h */ |
| #define CONFIG_NFSBOOTCOMMAND \ |
| "setenv bootargs root=/dev/nfs rw " \ |
| "nfsroot=$serverip:$rootpath " \ |
| "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ |
| "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ |
| "tftp $loadaddr $bootfile;" \ |
| "tftp $fdtaddr $fdtfile;" \ |
| "bootm $loadaddr - $fdtaddr" |
| |
| #define CONFIG_RAMBOOTCOMMAND \ |
| "setenv bootargs root=/dev/ram rw " \ |
| "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ |
| "tftp $ramdiskaddr $ramdiskfile;" \ |
| "tftp $loadaddr $bootfile;" \ |
| "tftp $fdtaddr $fdtfile;" \ |
| "bootm $loadaddr $ramdiskaddr $fdtaddr" |
| |
| #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND |
| |
| #endif /* CONFIG_TRAILBLAZER */ |
| |
| #endif |