| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2019 NXP |
| * Copyright 2022 Linaro |
| */ |
| |
| #include <dwc3-uboot.h> |
| #include <efi.h> |
| #include <efi_loader.h> |
| #include <errno.h> |
| #include <miiphy.h> |
| #include <netdev.h> |
| #include <spl.h> |
| #include <usb.h> |
| #include <asm/io.h> |
| #include <asm/mach-imx/iomux-v3.h> |
| #include <asm-generic/gpio.h> |
| #include <asm/arch/imx8mp_pins.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/mach-imx/gpio.h> |
| #include <asm/mach-imx/mxc_i2c.h> |
| #include <asm/arch/clock.h> |
| #include <asm/mach-imx/dma.h> |
| #include <linux/delay.h> |
| #include <linux/kernel.h> |
| #include <power/pmic.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #ifdef CONFIG_NAND_MXS |
| static void setup_gpmi_nand(void) |
| { |
| init_nand_clk(); |
| } |
| #endif |
| |
| #if IS_ENABLED(CONFIG_EFI_HAVE_CAPSULE_SUPPORT) |
| struct efi_fw_image fw_images[] = { |
| #if defined(CONFIG_TARGET_IMX8MP_RSB3720A1_4G) |
| { |
| .image_type_id = IMX8MP_RSB3720A1_4G_FIT_IMAGE_GUID, |
| .fw_name = u"IMX8MP-RSB3720-FIT", |
| .image_index = 1, |
| }, |
| #elif defined(CONFIG_TARGET_IMX8MP_RSB3720A1_6G) |
| { |
| .image_type_id = IMX8MP_RSB3720A1_6G_FIT_IMAGE_GUID, |
| .fw_name = u"IMX8MP-RSB3720-FIT", |
| .image_index = 1, |
| }, |
| #endif |
| }; |
| |
| struct efi_capsule_update_info update_info = { |
| .dfu_string = "mmc 2=flash-bin raw 0 0x1B00 mmcpart 1", |
| .num_images = ARRAY_SIZE(fw_images), |
| .images = fw_images, |
| }; |
| |
| #endif /* EFI_HAVE_CAPSULE_SUPPORT */ |
| |
| |
| int board_early_init_f(void) |
| { |
| init_uart_clk(2); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_OF_BOARD_SETUP |
| int ft_board_setup(void *blob, struct bd_info *bd) |
| { |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_FEC_MXC |
| #define FEC_RST_PAD IMX_GPIO_NR(4, 2) |
| static const iomux_v3_cfg_t fec1_rst_pads[] = { |
| MX8MP_PAD_SAI1_RXD0__GPIO4_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), |
| }; |
| |
| static void setup_iomux_fec(void) |
| { |
| imx_iomux_v3_setup_multiple_pads(fec1_rst_pads, |
| ARRAY_SIZE(fec1_rst_pads)); |
| |
| gpio_request(FEC_RST_PAD, "fec1_rst"); |
| gpio_direction_output(FEC_RST_PAD, 0); |
| mdelay(15); |
| gpio_direction_output(FEC_RST_PAD, 1); |
| mdelay(100); |
| } |
| |
| static int setup_fec(void) |
| { |
| struct iomuxc_gpr_base_regs *gpr = |
| (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; |
| |
| setup_iomux_fec(); |
| |
| /* Enable RGMII TX clk output */ |
| setbits_le32(&gpr->gpr[1], BIT(22)); |
| |
| return 0; |
| } |
| #endif /* CONFIG_FEC_MXC */ |
| |
| #ifdef CONFIG_DWC_ETH_QOS |
| #define EQOS_RST_PAD IMX_GPIO_NR(4, 22) |
| static const iomux_v3_cfg_t eqos_rst_pads[] = { |
| MX8MP_PAD_SAI2_RXC__GPIO4_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL), |
| }; |
| |
| static void setup_eqos(void) |
| { |
| imx_iomux_v3_setup_multiple_pads(eqos_rst_pads, |
| ARRAY_SIZE(eqos_rst_pads)); |
| |
| gpio_request(EQOS_RST_PAD, "eqos_rst"); |
| gpio_direction_output(EQOS_RST_PAD, 0); |
| mdelay(15); |
| gpio_direction_output(EQOS_RST_PAD, 1); |
| mdelay(100); |
| } |
| #endif /* CONFIG_DWC_ETH_QOS */ |
| |
| int board_phy_config(struct phy_device *phydev) |
| { |
| if (IS_ENABLED(CONFIG_FEC_MXC) || IS_ENABLED(CONFIG_DWC_ETH_QOS)) { |
| /* enable rgmii rxc skew and phy mode select to RGMII copper */ |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8); |
| |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x00); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x82ee); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); |
| |
| if (phydev->drv->config) |
| phydev->drv->config(phydev); |
| } |
| |
| return 0; |
| } |
| |
| #define DISPMIX 13 |
| #define MIPI 15 |
| |
| #define WDOG_TRIG IMX_GPIO_NR(4, 20) |
| |
| static iomux_v3_cfg_t wdt_trig[] = { |
| MX8MP_PAD_SAI1_MCLK__GPIO4_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL), |
| }; |
| |
| static void setup_iomux_wdt(void) |
| { |
| imx_iomux_v3_setup_multiple_pads(wdt_trig, ARRAY_SIZE(wdt_trig)); |
| gpio_request(WDOG_TRIG, "wdt_trig"); |
| gpio_direction_output(WDOG_TRIG, 1); |
| } |
| |
| int board_init(void) |
| { |
| #ifdef CONFIG_FEC_MXC |
| setup_fec(); |
| #endif |
| |
| #ifdef CONFIG_DWC_ETH_QOS |
| /* clock, pin, gpr */ |
| setup_eqos(); |
| #endif |
| |
| #ifdef CONFIG_NAND_MXS |
| setup_gpmi_nand(); |
| #endif |
| |
| setup_iomux_wdt(); |
| |
| return 0; |
| } |
| |
| int board_late_init(void) |
| { |
| if (IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)) { |
| env_set("board_name", "RSB3720A1"); |
| env_set("board_rev", "iMX8MP"); |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_SPL_MMC |
| #define UBOOT_RAW_SECTOR_OFFSET 0x40 |
| unsigned long board_spl_mmc_get_uboot_raw_sector(struct mmc *mmc, |
| unsigned long raw_sector) |
| { |
| u32 boot_dev = spl_boot_device(); |
| |
| switch (boot_dev) { |
| case BOOT_DEVICE_MMC2: |
| return CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - UBOOT_RAW_SECTOR_OFFSET; |
| default: |
| return CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR; |
| } |
| } |
| #endif /* CONFIG_SPL_MMC */ |