| /* |
| * Copyright (c) 2016 Rockchip, Inc. |
| * Authors: Daniel Meng <daniel.meng@rock-chips.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <common.h> |
| #include <dm.h> |
| #include <fdtdec.h> |
| #include <libfdt.h> |
| #include <malloc.h> |
| #include <usb.h> |
| #include <watchdog.h> |
| #include <linux/errno.h> |
| #include <linux/compat.h> |
| #include <linux/usb/dwc3.h> |
| #include <power/regulator.h> |
| |
| #include "xhci.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct rockchip_xhci_platdata { |
| fdt_addr_t hcd_base; |
| fdt_addr_t phy_base; |
| struct udevice *vbus_supply; |
| }; |
| |
| /* |
| * Contains pointers to register base addresses |
| * for the usb controller. |
| */ |
| struct rockchip_xhci { |
| struct usb_platdata usb_plat; |
| struct xhci_ctrl ctrl; |
| struct xhci_hccr *hcd; |
| struct dwc3 *dwc3_reg; |
| }; |
| |
| static int xhci_usb_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct rockchip_xhci_platdata *plat = dev_get_platdata(dev); |
| struct udevice *child; |
| int ret = 0; |
| |
| /* |
| * Get the base address for XHCI controller from the device node |
| */ |
| plat->hcd_base = devfdt_get_addr(dev); |
| if (plat->hcd_base == FDT_ADDR_T_NONE) { |
| debug("Can't get the XHCI register base address\n"); |
| return -ENXIO; |
| } |
| |
| /* Get the base address for usbphy from the device node */ |
| for (device_find_first_child(dev, &child); child; |
| device_find_next_child(&child)) { |
| if (!device_is_compatible(child, "rockchip,rk3399-usb3-phy")) |
| continue; |
| plat->phy_base = devfdt_get_addr(child); |
| break; |
| } |
| |
| if (plat->phy_base == FDT_ADDR_T_NONE) { |
| debug("Can't get the usbphy register address\n"); |
| return -ENXIO; |
| } |
| |
| #if defined(CONFIG_DM_USB) && defined(CONFIG_DM_REGULATOR) |
| /* Vbus regulator */ |
| ret = device_get_supply_regulator(dev, "vbus-supply", |
| &plat->vbus_supply); |
| if (ret) |
| debug("Can't get vbus supply\n"); |
| #endif |
| |
| return 0; |
| } |
| |
| /* |
| * rockchip_dwc3_phy_setup() - Configure USB PHY Interface of DWC3 Core |
| * @dwc: Pointer to our controller context structure |
| * @dev: Pointer to ulcass device |
| */ |
| static void rockchip_dwc3_phy_setup(struct dwc3 *dwc3_reg, |
| struct udevice *dev) |
| { |
| u32 reg; |
| const void *blob = gd->fdt_blob; |
| u32 utmi_bits; |
| |
| /* Set dwc3 usb2 phy config */ |
| reg = readl(&dwc3_reg->g_usb2phycfg[0]); |
| |
| if (fdtdec_get_bool(blob, dev_of_offset(dev), |
| "snps,dis-enblslpm-quirk")) |
| reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; |
| |
| utmi_bits = fdtdec_get_int(blob, dev_of_offset(dev), |
| "snps,phyif-utmi-bits", -1); |
| if (utmi_bits == 16) { |
| reg |= DWC3_GUSB2PHYCFG_PHYIF; |
| reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK; |
| reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT; |
| } else if (utmi_bits == 8) { |
| reg &= ~DWC3_GUSB2PHYCFG_PHYIF; |
| reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK; |
| reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_8BIT; |
| } |
| |
| if (fdtdec_get_bool(blob, dev_of_offset(dev), |
| "snps,dis-u2-freeclk-exists-quirk")) |
| reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS; |
| |
| if (fdtdec_get_bool(blob, dev_of_offset(dev), |
| "snps,dis-u2-susphy-quirk")) |
| reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; |
| |
| writel(reg, &dwc3_reg->g_usb2phycfg[0]); |
| } |
| |
| static int rockchip_xhci_core_init(struct rockchip_xhci *rkxhci, |
| struct udevice *dev) |
| { |
| int ret; |
| |
| ret = dwc3_core_init(rkxhci->dwc3_reg); |
| if (ret) { |
| debug("failed to initialize core\n"); |
| return ret; |
| } |
| |
| rockchip_dwc3_phy_setup(rkxhci->dwc3_reg, dev); |
| |
| /* We are hard-coding DWC3 core to Host Mode */ |
| dwc3_set_mode(rkxhci->dwc3_reg, DWC3_GCTL_PRTCAP_HOST); |
| |
| return 0; |
| } |
| |
| static int rockchip_xhci_core_exit(struct rockchip_xhci *rkxhci) |
| { |
| return 0; |
| } |
| |
| static int xhci_usb_probe(struct udevice *dev) |
| { |
| struct rockchip_xhci_platdata *plat = dev_get_platdata(dev); |
| struct rockchip_xhci *ctx = dev_get_priv(dev); |
| struct xhci_hcor *hcor; |
| int ret; |
| |
| ctx->hcd = (struct xhci_hccr *)plat->hcd_base; |
| ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET); |
| hcor = (struct xhci_hcor *)((uint64_t)ctx->hcd + |
| HC_LENGTH(xhci_readl(&ctx->hcd->cr_capbase))); |
| |
| #if defined(CONFIG_DM_USB) && defined(CONFIG_DM_REGULATOR) |
| ret = regulator_set_enable(plat->vbus_supply, true); |
| if (ret) |
| debug("XHCI: Failed to enable vbus supply\n"); |
| #endif |
| |
| ret = rockchip_xhci_core_init(ctx, dev); |
| if (ret) { |
| debug("XHCI: failed to initialize controller\n"); |
| return ret; |
| } |
| |
| return xhci_register(dev, ctx->hcd, hcor); |
| } |
| |
| static int xhci_usb_remove(struct udevice *dev) |
| { |
| struct rockchip_xhci_platdata *plat = dev_get_platdata(dev); |
| struct rockchip_xhci *ctx = dev_get_priv(dev); |
| int ret; |
| |
| ret = xhci_deregister(dev); |
| if (ret) |
| return ret; |
| ret = rockchip_xhci_core_exit(ctx); |
| if (ret) |
| return ret; |
| |
| #if defined(CONFIG_DM_USB) && defined(CONFIG_DM_REGULATOR) |
| ret = regulator_set_enable(plat->vbus_supply, false); |
| if (ret) |
| debug("XHCI: Failed to disable vbus supply\n"); |
| #endif |
| |
| return 0; |
| } |
| |
| static const struct udevice_id xhci_usb_ids[] = { |
| { .compatible = "rockchip,rk3399-xhci" }, |
| { .compatible = "rockchip,rk3328-xhci" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(usb_xhci) = { |
| .name = "xhci_rockchip", |
| .id = UCLASS_USB, |
| .of_match = xhci_usb_ids, |
| .ofdata_to_platdata = xhci_usb_ofdata_to_platdata, |
| .probe = xhci_usb_probe, |
| .remove = xhci_usb_remove, |
| .ops = &xhci_usb_ops, |
| .bind = dm_scan_fdt_dev, |
| .platdata_auto_alloc_size = sizeof(struct rockchip_xhci_platdata), |
| .priv_auto_alloc_size = sizeof(struct rockchip_xhci), |
| .flags = DM_FLAG_ALLOC_PRIV_DMA, |
| }; |
| |
| static const struct udevice_id usb_phy_ids[] = { |
| { .compatible = "rockchip,rk3399-usb3-phy" }, |
| { .compatible = "rockchip,rk3328-usb3-phy" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(usb_phy) = { |
| .name = "usb_phy_rockchip", |
| .of_match = usb_phy_ids, |
| }; |