include/configs/adp-ag101p.h - filogic/uboot - Gitiles

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2011 Andes Technology Corporation
  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #include <asm/arch-ag101/ag101.h>

 /*
  * CPU and Board Configuration Options
  */
 #define CONFIG_USE_INTERRUPT

 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_MEM_REMAP
 #endif

 /*
  * Timer
  */
 #define VERSION_CLOCK		get_board_sys_clk()

 /*
  * Use Externel CLOCK or PCLK
  */
 #undef CONFIG_FTRTC010_EXTCLK

 #ifndef CONFIG_FTRTC010_EXTCLK
 #define CONFIG_FTRTC010_PCLK
 #endif

 #ifdef CONFIG_FTRTC010_EXTCLK
 #define TIMER_CLOCK	32768			/* CONFIG_FTRTC010_EXTCLK */
 #else
 #define TIMER_CLOCK	CONFIG_SYS_HZ		/* CONFIG_FTRTC010_PCLK */
 #endif

 #define TIMER_LOAD_VAL	0xffffffff

 /*
  * Real Time Clock
  */
 #define CONFIG_RTC_FTRTC010

 /*
  * Real Time Clock Divider
  * RTC_DIV_COUNT			(OSC_CLK/OSC_5MHZ)
  */
 #define OSC_5MHZ			(5*1000000)
 #define OSC_CLK				(4*OSC_5MHZ)
 #define RTC_DIV_COUNT			(0.5)	/* Why?? */

 /*
  * Serial console configuration
  */

 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_COM1		CONFIG_FTUART010_02_BASE
 #ifndef CONFIG_DM_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	-4
 #endif
 #define CONFIG_SYS_NS16550_CLK		((18432000 * 20) / 25)	/* AG101P */

 /*
  * Miscellaneous configurable options
  */

 /*
  * AHB Controller configuration
  */
 #define CONFIG_FTAHBC020S

 #ifdef CONFIG_FTAHBC020S
 #include <faraday/ftahbc020s.h>

 /* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE	0x100

 /*
  * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
  * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
  * in C language.
  */
 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
 	(FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \
 					FTAHBC020S_SLAVE_BSR_SIZE(0xb))
 #endif

 /*
  * Watchdog
  */
 #define CONFIG_FTWDT010_WATCHDOG

 /*
  * PMU Power controller configuration
  */
 #define CONFIG_PMU
 #define CONFIG_FTPMU010_POWER

 #ifdef CONFIG_FTPMU010_POWER
 #include <faraday/ftpmu010.h>
 #define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS		0x0E
 #define CONFIG_SYS_FTPMU010_SDRAMHTC	(FTPMU010_SDRAMHTC_EBICTRL_DCSR  | \
 					 FTPMU010_SDRAMHTC_EBIDATA_DCSR  | \
 					 FTPMU010_SDRAMHTC_SDRAMCS_DCSR  | \
 					 FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \
 					 FTPMU010_SDRAMHTC_CKE_DCSR	 | \
 					 FTPMU010_SDRAMHTC_DQM_DCSR	 | \
 					 FTPMU010_SDRAMHTC_SDCLK_DCSR)
 #endif

 /*
  * SDRAM controller configuration
  */
 #define CONFIG_FTSDMC021

 #ifdef CONFIG_FTSDMC021
 #include <faraday/ftsdmc021.h>

 #define CONFIG_SYS_FTSDMC021_TP1	(FTSDMC021_TP1_TRAS(2)	|	\
 					 FTSDMC021_TP1_TRP(1)	|	\
 					 FTSDMC021_TP1_TRCD(1)	|	\
 					 FTSDMC021_TP1_TRF(3)	|	\
 					 FTSDMC021_TP1_TWR(1)	|	\
 					 FTSDMC021_TP1_TCL(2))

 #define CONFIG_SYS_FTSDMC021_TP2	(FTSDMC021_TP2_INI_PREC(4) |	\
 					 FTSDMC021_TP2_INI_REFT(8) |	\
 					 FTSDMC021_TP2_REF_INTV(0x180))

 /*
  * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S,
  * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in
  * C language.
  */
 #define CONFIG_SYS_FTSDMC021_CR1	(FTSDMC021_CR1_DDW(2)	 |	\
 					 FTSDMC021_CR1_DSZ(3)	 |	\
 					 FTSDMC021_CR1_MBW(2)	 |	\
 					 FTSDMC021_CR1_BNKSIZE(6))

 #define CONFIG_SYS_FTSDMC021_CR2	(FTSDMC021_CR2_IPREC	 |	\
 					 FTSDMC021_CR2_IREF	 |	\
 					 FTSDMC021_CR2_ISMR)

 #define CONFIG_SYS_FTSDMC021_BANK0_BASE	CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE
 #define CONFIG_SYS_FTSDMC021_BANK0_BSR	(FTSDMC021_BANK_ENABLE	 |	\
 					 CONFIG_SYS_FTSDMC021_BANK0_BASE)

 #define CONFIG_SYS_FTSDMC021_BANK1_BASE	\
 	(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20))
 #define CONFIG_SYS_FTSDMC021_BANK1_BSR	(FTSDMC021_BANK_ENABLE	 |	\
 					 CONFIG_SYS_FTSDMC021_BANK1_BASE)
 #endif

 /*
  * Physical Memory Map
  */
 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
 #define PHYS_SDRAM_0	0x00000000  /* SDRAM Bank #1 */
 #else
 #ifdef CONFIG_MEM_REMAP
 #define PHYS_SDRAM_0	0x00000000	/* SDRAM Bank #1 */
 #else
 #define PHYS_SDRAM_0	0x80000000	/* SDRAM Bank #1 */
 #endif
 #endif

 #define PHYS_SDRAM_1 \
 	(PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)	/* SDRAM Bank #2 */

 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
 #define PHYS_SDRAM_0_SIZE	0x20000000	/* 512 MB */
 #define PHYS_SDRAM_1_SIZE	0x20000000	/* 512 MB */
 #else
 #ifdef CONFIG_MEM_REMAP
 #define PHYS_SDRAM_0_SIZE	0x20000000	/* 512 MB */
 #define PHYS_SDRAM_1_SIZE	0x20000000	/* 512 MB */
 #else
 #define PHYS_SDRAM_0_SIZE	0x08000000	/* 128 MB */
 #define PHYS_SDRAM_1_SIZE	0x08000000	/* 128 MB */
 #endif
 #endif

 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_0

 #ifdef CONFIG_MEM_REMAP
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
 					GENERATED_GBL_DATA_SIZE)
 #else
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
 					GENERATED_GBL_DATA_SIZE)
 #endif /* CONFIG_MEM_REMAP */

 /*
  * Static memory controller configuration
  */
 #define CONFIG_FTSMC020

 #ifdef CONFIG_FTSMC020
 #include <faraday/ftsmc020.h>

 #define CONFIG_SYS_FTSMC020_CONFIGS	{			\
 	{ FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, },	\
 	{ FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, },	\
 }

 #ifndef CONFIG_SKIP_LOWLEVEL_INIT	/* FLASH is on BANK 0 */
 #define FTSMC020_BANK0_LOWLV_CONFIG	(FTSMC020_BANK_ENABLE	|	\
 					 FTSMC020_BANK_SIZE_32M	|	\
 					 FTSMC020_BANK_MBW_32)

 #define FTSMC020_BANK0_LOWLV_TIMING	(FTSMC020_TPR_RBE	|	\
 					 FTSMC020_TPR_AST(1)	|	\
 					 FTSMC020_TPR_CTW(1)	|	\
 					 FTSMC020_TPR_ATI(1)	|	\
 					 FTSMC020_TPR_AT2(1)	|	\
 					 FTSMC020_TPR_WTC(1)	|	\
 					 FTSMC020_TPR_AHT(1)	|	\
 					 FTSMC020_TPR_TRNA(1))
 #endif

 /*
  * FLASH on ADP_AG101P is connected to BANK0
  * Just disalbe the other BANK to avoid detection error.
  */
 #define FTSMC020_BANK0_CONFIG	(FTSMC020_BANK_ENABLE             |	\
 				 FTSMC020_BANK_BASE(PHYS_FLASH_1) |	\
 				 FTSMC020_BANK_SIZE_32M           |	\
 				 FTSMC020_BANK_MBW_32)

 #define FTSMC020_BANK0_TIMING	(FTSMC020_TPR_AST(3)   |	\
 				 FTSMC020_TPR_CTW(3)   |	\
 				 FTSMC020_TPR_ATI(0xf) |	\
 				 FTSMC020_TPR_AT2(3)   |	\
 				 FTSMC020_TPR_WTC(3)   |	\
 				 FTSMC020_TPR_AHT(3)   |	\
 				 FTSMC020_TPR_TRNA(0xf))

 #define FTSMC020_BANK1_CONFIG	(0x00)
 #define FTSMC020_BANK1_TIMING	(0x00)
 #endif /* CONFIG_FTSMC020 */

 /*
  * FLASH and environment organization
  */
 /* use CFI framework */

 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL

 /* support JEDEC */

 /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
 #define PHYS_FLASH_1			0x80000000	/* BANK 0 */
 #else
 #ifdef CONFIG_MEM_REMAP
 #define PHYS_FLASH_1			0x80000000	/* BANK 0 */
 #else
 #define PHYS_FLASH_1			0x00000000	/* BANK 0 */
 #endif
 #endif	/* CONFIG_MEM_REMAP */

 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 #define CONFIG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1, }
 #define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1

 #define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* TO for Flash Erase (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* TO for Flash Write (ms) */

 /* max number of memory banks */
 /*
  * There are 4 banks supported for this Controller,
  * but we have only 1 bank connected to flash on board
  */
 #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}

 /* max number of sectors on one chip */
 #define CONFIG_FLASH_SECTOR_SIZE	(0x10000*2)
 #define CONFIG_SYS_MAX_FLASH_SECT	512

 /* environments */

 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 16 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */

 /* Initial Memory map for Linux*/
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)
 /* Increase max gunzip size */
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)

 #endif	/* __CONFIG_H */
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* Copyright (C) 2011 Andes Technology Corporation
	* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
	* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#include <asm/arch-ag101/ag101.h>

	/*
	* CPU and Board Configuration Options
	*/
	#define CONFIG_USE_INTERRUPT

	#ifndef CONFIG_SKIP_LOWLEVEL_INIT
	#define CONFIG_MEM_REMAP
	#endif

	/*
	* Timer
	*/
	#define VERSION_CLOCK get_board_sys_clk()

	/*
	* Use Externel CLOCK or PCLK
	*/
	#undef CONFIG_FTRTC010_EXTCLK

	#ifndef CONFIG_FTRTC010_EXTCLK
	#define CONFIG_FTRTC010_PCLK
	#endif

	#ifdef CONFIG_FTRTC010_EXTCLK
	#define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */
	#else
	#define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */
	#endif

	#define TIMER_LOAD_VAL 0xffffffff

	/*
	* Real Time Clock
	*/
	#define CONFIG_RTC_FTRTC010

	/*
	* Real Time Clock Divider
	* RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
	*/
	#define OSC_5MHZ (5*1000000)
	#define OSC_CLK (4*OSC_5MHZ)
	#define RTC_DIV_COUNT (0.5) /* Why?? */

	/*
	* Serial console configuration
	*/

	/* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
	#define CONFIG_SYS_NS16550_SERIAL
	#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE
	#ifndef CONFIG_DM_SERIAL
	#define CONFIG_SYS_NS16550_REG_SIZE -4
	#endif
	#define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */

	/*
	* Miscellaneous configurable options
	*/

	/*
	* AHB Controller configuration
	*/
	#define CONFIG_FTAHBC020S

	#ifdef CONFIG_FTAHBC020S
	#include <faraday/ftahbc020s.h>

	/* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
	#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100

	/*
	* CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
	* hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
	* in C language.
	*/
	#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
	(FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) \| \
	FTAHBC020S_SLAVE_BSR_SIZE(0xb))
	#endif

	/*
	* Watchdog
	*/
	#define CONFIG_FTWDT010_WATCHDOG

	/*
	* PMU Power controller configuration
	*/
	#define CONFIG_PMU
	#define CONFIG_FTPMU010_POWER

	#ifdef CONFIG_FTPMU010_POWER
	#include <faraday/ftpmu010.h>
	#define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS 0x0E
	#define CONFIG_SYS_FTPMU010_SDRAMHTC (FTPMU010_SDRAMHTC_EBICTRL_DCSR \| \
	FTPMU010_SDRAMHTC_EBIDATA_DCSR \| \
	FTPMU010_SDRAMHTC_SDRAMCS_DCSR \| \
	FTPMU010_SDRAMHTC_SDRAMCTL_DCSR \| \
	FTPMU010_SDRAMHTC_CKE_DCSR \| \
	FTPMU010_SDRAMHTC_DQM_DCSR \| \
	FTPMU010_SDRAMHTC_SDCLK_DCSR)
	#endif

	/*
	* SDRAM controller configuration
	*/
	#define CONFIG_FTSDMC021

	#ifdef CONFIG_FTSDMC021
	#include <faraday/ftsdmc021.h>

	#define CONFIG_SYS_FTSDMC021_TP1 (FTSDMC021_TP1_TRAS(2) \| \
	FTSDMC021_TP1_TRP(1) \| \
	FTSDMC021_TP1_TRCD(1) \| \
	FTSDMC021_TP1_TRF(3) \| \
	FTSDMC021_TP1_TWR(1) \| \
	FTSDMC021_TP1_TCL(2))

	#define CONFIG_SYS_FTSDMC021_TP2 (FTSDMC021_TP2_INI_PREC(4) \| \
	FTSDMC021_TP2_INI_REFT(8) \| \
	FTSDMC021_TP2_REF_INTV(0x180))

	/*
	* CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S,
	* hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in
	* C language.
	*/
	#define CONFIG_SYS_FTSDMC021_CR1 (FTSDMC021_CR1_DDW(2) \| \
	FTSDMC021_CR1_DSZ(3) \| \
	FTSDMC021_CR1_MBW(2) \| \
	FTSDMC021_CR1_BNKSIZE(6))

	#define CONFIG_SYS_FTSDMC021_CR2 (FTSDMC021_CR2_IPREC \| \
	FTSDMC021_CR2_IREF \| \
	FTSDMC021_CR2_ISMR)

	#define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE
	#define CONFIG_SYS_FTSDMC021_BANK0_BSR (FTSDMC021_BANK_ENABLE \| \
	CONFIG_SYS_FTSDMC021_BANK0_BASE)

	#define CONFIG_SYS_FTSDMC021_BANK1_BASE \
	(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20))
	#define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE \| \
	CONFIG_SYS_FTSDMC021_BANK1_BASE)
	#endif

	/*
	* Physical Memory Map
	*/
	#ifdef CONFIG_SKIP_LOWLEVEL_INIT
	#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
	#else
	#ifdef CONFIG_MEM_REMAP
	#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
	#else
	#define PHYS_SDRAM_0 0x80000000 /* SDRAM Bank #1 */
	#endif
	#endif

	#define PHYS_SDRAM_1 \
	(PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */

	#ifdef CONFIG_SKIP_LOWLEVEL_INIT
	#define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */
	#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
	#else
	#ifdef CONFIG_MEM_REMAP
	#define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */
	#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
	#else
	#define PHYS_SDRAM_0_SIZE 0x08000000 /* 128 MB */
	#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
	#endif
	#endif

	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0

	#ifdef CONFIG_MEM_REMAP
	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
	GENERATED_GBL_DATA_SIZE)
	#else
	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
	GENERATED_GBL_DATA_SIZE)
	#endif /* CONFIG_MEM_REMAP */

	/*
	* Static memory controller configuration
	*/
	#define CONFIG_FTSMC020

	#ifdef CONFIG_FTSMC020
	#include <faraday/ftsmc020.h>

	#define CONFIG_SYS_FTSMC020_CONFIGS { \
	{ FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \
	{ FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \
	}

	#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */
	#define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE \| \
	FTSMC020_BANK_SIZE_32M \| \
	FTSMC020_BANK_MBW_32)

	#define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE \| \
	FTSMC020_TPR_AST(1) \| \
	FTSMC020_TPR_CTW(1) \| \
	FTSMC020_TPR_ATI(1) \| \
	FTSMC020_TPR_AT2(1) \| \
	FTSMC020_TPR_WTC(1) \| \
	FTSMC020_TPR_AHT(1) \| \
	FTSMC020_TPR_TRNA(1))
	#endif

	/*
	* FLASH on ADP_AG101P is connected to BANK0
	* Just disalbe the other BANK to avoid detection error.
	*/
	#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE \| \
	FTSMC020_BANK_BASE(PHYS_FLASH_1) \| \
	FTSMC020_BANK_SIZE_32M \| \
	FTSMC020_BANK_MBW_32)

	#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_AST(3) \| \
	FTSMC020_TPR_CTW(3) \| \
	FTSMC020_TPR_ATI(0xf) \| \
	FTSMC020_TPR_AT2(3) \| \
	FTSMC020_TPR_WTC(3) \| \
	FTSMC020_TPR_AHT(3) \| \
	FTSMC020_TPR_TRNA(0xf))

	#define FTSMC020_BANK1_CONFIG (0x00)
	#define FTSMC020_BANK1_TIMING (0x00)
	#endif /* CONFIG_FTSMC020 */

	/*
	* FLASH and environment organization
	*/
	/* use CFI framework */

	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
	#define CONFIG_SYS_CFI_FLASH_STATUS_POLL

	/* support JEDEC */

	/* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
	#ifdef CONFIG_SKIP_LOWLEVEL_INIT
	#define PHYS_FLASH_1 0x80000000 /* BANK 0 */
	#else
	#ifdef CONFIG_MEM_REMAP
	#define PHYS_FLASH_1 0x80000000 /* BANK 0 */
	#else
	#define PHYS_FLASH_1 0x00000000 /* BANK 0 */
	#endif
	#endif /* CONFIG_MEM_REMAP */

	#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
	#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, }
	#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1

	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */
	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */

	/* max number of memory banks */
	/*
	* There are 4 banks supported for this Controller,
	* but we have only 1 bank connected to flash on board
	*/
	#define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}

	/* max number of sectors on one chip */
	#define CONFIG_FLASH_SECTOR_SIZE (0x10000*2)
	#define CONFIG_SYS_MAX_FLASH_SECT 512

	/* environments */

	/*
	* For booting Linux, the board info and command line data
	* have to be in the first 16 MB of memory, since this is
	* the maximum mapped by the Linux kernel during initialization.
	*/

	/* Initial Memory map for Linux*/
	#define CONFIG_SYS_BOOTMAPSZ (64 << 20)
	/* Increase max gunzip size */
	#define CONFIG_SYS_BOOTM_LEN (64 << 20)

	#endif /* __CONFIG_H */