| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * |
| * (C) Copyright 2000-2003 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * (C) Copyright 2004-2007, 2012 Freescale Semiconductor, Inc. |
| * TsiChung Liew (Tsi-Chung.Liew@freescale.com) |
| */ |
| |
| #include <common.h> |
| #include <cpu_func.h> |
| #include <init.h> |
| #include <watchdog.h> |
| #include <asm/immap.h> |
| #include <asm/processor.h> |
| #include <asm/rtc.h> |
| #include <asm/io.h> |
| #include <linux/compiler.h> |
| |
| #if defined(CONFIG_CMD_NET) |
| #include <config.h> |
| #include <net.h> |
| #include <asm/fec.h> |
| #endif |
| |
| void init_fbcs(void) |
| { |
| fbcs_t *fbcs __maybe_unused = (fbcs_t *) MMAP_FBCS; |
| |
| #if !defined(CONFIG_SERIAL_BOOT) |
| #if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL)) |
| out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE); |
| out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL); |
| out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK); |
| #endif |
| #endif |
| |
| #if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL)) |
| /* Latch chipselect */ |
| out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE); |
| out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL); |
| out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK); |
| #endif |
| |
| #if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL)) |
| out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE); |
| out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL); |
| out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK); |
| #endif |
| |
| #if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL)) |
| out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE); |
| out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL); |
| out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK); |
| #endif |
| |
| #if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL)) |
| out_be32(&fbcs->csar4, CONFIG_SYS_CS4_BASE); |
| out_be32(&fbcs->cscr4, CONFIG_SYS_CS4_CTRL); |
| out_be32(&fbcs->csmr4, CONFIG_SYS_CS4_MASK); |
| #endif |
| |
| #if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL)) |
| out_be32(&fbcs->csar5, CONFIG_SYS_CS5_BASE); |
| out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL); |
| out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK); |
| #endif |
| } |
| |
| #ifdef CONFIG_CF_DSPI |
| void cfspi_port_conf(void) |
| { |
| gpio_t *gpio = (gpio_t *)MMAP_GPIO; |
| |
| #ifdef CONFIG_MCF5441x |
| pm_t *pm = (pm_t *)MMAP_PM; |
| |
| out_8(&gpio->par_dspi0, |
| GPIO_PAR_DSPI0_SIN_DSPI0SIN | GPIO_PAR_DSPI0_SOUT_DSPI0SOUT | |
| GPIO_PAR_DSPI0_SCK_DSPI0SCK); |
| out_8(&gpio->srcr_dspiow, 3); |
| |
| /* DSPI0 */ |
| out_8(&pm->pmcr0, 23); |
| #endif |
| } |
| #endif |
| |
| /* |
| * Breath some life into the CPU... |
| * |
| * Set up the memory map, |
| * initialize a bunch of registers, |
| * initialize the UPM's |
| */ |
| void cpu_init_f(void) |
| { |
| gpio_t *gpio = (gpio_t *) MMAP_GPIO; |
| |
| #ifdef CONFIG_MCF5441x |
| scm_t *scm = (scm_t *) MMAP_SCM; |
| pm_t *pm = (pm_t *) MMAP_PM; |
| |
| /* Disable Switch */ |
| *(unsigned long *)(MMAP_L2_SW0 + 0x00000024) = 0; |
| |
| /* Disable core watchdog */ |
| out_be16(&scm->cwcr, 0); |
| out_8(&gpio->par_fbctl, |
| GPIO_PAR_FBCTL_ALE_FB_ALE | GPIO_PAR_FBCTL_OE_FB_OE | |
| GPIO_PAR_FBCTL_FBCLK | GPIO_PAR_FBCTL_RW | |
| GPIO_PAR_FBCTL_TA_TA); |
| out_8(&gpio->par_be, |
| GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 | |
| GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0); |
| |
| /* eDMA */ |
| out_8(&pm->pmcr0, 17); |
| |
| /* INTR0 - INTR2 */ |
| out_8(&pm->pmcr0, 18); |
| out_8(&pm->pmcr0, 19); |
| out_8(&pm->pmcr0, 20); |
| |
| /* I2C */ |
| out_8(&pm->pmcr0, 22); |
| out_8(&pm->pmcr1, 4); |
| out_8(&pm->pmcr1, 7); |
| |
| /* DTMR0 - DTMR3*/ |
| out_8(&pm->pmcr0, 28); |
| out_8(&pm->pmcr0, 29); |
| out_8(&pm->pmcr0, 30); |
| out_8(&pm->pmcr0, 31); |
| |
| /* PIT0 - PIT3 */ |
| out_8(&pm->pmcr0, 32); |
| out_8(&pm->pmcr0, 33); |
| out_8(&pm->pmcr0, 34); |
| out_8(&pm->pmcr0, 35); |
| |
| /* Edge Port */ |
| out_8(&pm->pmcr0, 36); |
| out_8(&pm->pmcr0, 37); |
| |
| /* USB OTG */ |
| out_8(&pm->pmcr0, 44); |
| /* USB Host */ |
| out_8(&pm->pmcr0, 45); |
| |
| /* ESDHC */ |
| out_8(&pm->pmcr0, 51); |
| |
| /* ENET0 - ENET1 */ |
| out_8(&pm->pmcr0, 53); |
| out_8(&pm->pmcr0, 54); |
| |
| /* NAND */ |
| out_8(&pm->pmcr0, 63); |
| |
| #ifdef CONFIG_SYS_I2C_0 |
| out_8(&gpio->par_cani2c, 0xF0); |
| /* I2C0 pull up */ |
| out_be16(&gpio->pcr_b, 0x003C); |
| /* I2C0 max speed */ |
| out_8(&gpio->srcr_cani2c, 0x03); |
| #endif |
| #ifdef CONFIG_SYS_I2C_2 |
| /* I2C2 */ |
| out_8(&gpio->par_ssi0h, 0xA0); |
| /* I2C2, UART7 */ |
| out_8(&gpio->par_ssi0h, 0xA8); |
| /* UART7 */ |
| out_8(&gpio->par_ssi0l, 0x2); |
| /* UART8, UART9 */ |
| out_8(&gpio->par_cani2c, 0xAA); |
| /* UART4, UART0 */ |
| out_8(&gpio->par_uart0, 0xAF); |
| /* UART5, UART1 */ |
| out_8(&gpio->par_uart1, 0xAF); |
| /* UART6, UART2 */ |
| out_8(&gpio->par_uart2, 0xAF); |
| /* I2C2 pull up */ |
| out_be16(&gpio->pcr_h, 0xF000); |
| #endif |
| #ifdef CONFIG_SYS_I2C_5 |
| /* I2C5 */ |
| out_8(&gpio->par_uart1, 0x0A); |
| /* I2C5 pull up */ |
| out_be16(&gpio->pcr_e, 0x0003); |
| out_be16(&gpio->pcr_f, 0xC000); |
| #endif |
| |
| /* Lowest slew rate for UART0,1,2 */ |
| out_8(&gpio->srcr_uart, 0x00); |
| |
| #ifdef CONFIG_FSL_ESDHC_IMX |
| /* eSDHC pin as faster speed */ |
| out_8(&gpio->srcr_sdhc, 0x03); |
| |
| /* All esdhc pins as SD */ |
| out_8(&gpio->par_sdhch, 0xff); |
| out_8(&gpio->par_sdhcl, 0xff); |
| #endif |
| #endif /* CONFIG_MCF5441x */ |
| |
| /* FlexBus Chipselect */ |
| init_fbcs(); |
| |
| #ifdef CONFIG_SYS_CS0_BASE |
| /* |
| * now the flash base address is no longer at 0 (Newer ColdFire family |
| * boot at address 0 instead of 0xFFnn_nnnn). The vector table must |
| * also move to the new location. |
| */ |
| if (CONFIG_SYS_CS0_BASE != 0) |
| setvbr(CONFIG_SYS_CS0_BASE); |
| #endif |
| |
| icache_enable(); |
| } |
| |
| /* |
| * initialize higher level parts of CPU like timers |
| */ |
| int cpu_init_r(void) |
| { |
| #ifdef CONFIG_MCFRTC |
| rtc_t *rtc = (rtc_t *)(CONFIG_SYS_MCFRTC_BASE); |
| rtcex_t *rtcex = (rtcex_t *)&rtc->extended; |
| |
| out_be32(&rtcex->gocu, (CONFIG_SYS_RTC_OSCILLATOR >> 16) & 0xffff); |
| out_be32(&rtcex->gocl, CONFIG_SYS_RTC_OSCILLATOR & 0xffff); |
| #endif |
| |
| return (0); |
| } |
| |
| void uart_port_conf(int port) |
| { |
| gpio_t *gpio = (gpio_t *) MMAP_GPIO; |
| #ifdef CONFIG_MCF5441x |
| pm_t *pm = (pm_t *) MMAP_PM; |
| #endif |
| |
| /* Setup Ports: */ |
| switch (port) { |
| #ifdef CONFIG_MCF5441x |
| case 0: |
| /* UART0 */ |
| out_8(&pm->pmcr0, 24); |
| clrbits_8(&gpio->par_uart0, |
| ~(GPIO_PAR_UART0_U0RXD_MASK | GPIO_PAR_UART0_U0TXD_MASK)); |
| setbits_8(&gpio->par_uart0, |
| GPIO_PAR_UART0_U0RXD_U0RXD | GPIO_PAR_UART0_U0TXD_U0TXD); |
| break; |
| case 1: |
| /* UART1 */ |
| out_8(&pm->pmcr0, 25); |
| clrbits_8(&gpio->par_uart1, |
| ~(GPIO_PAR_UART1_U1RXD_MASK | GPIO_PAR_UART1_U1TXD_MASK)); |
| setbits_8(&gpio->par_uart1, |
| GPIO_PAR_UART1_U1RXD_U1RXD | GPIO_PAR_UART1_U1TXD_U1TXD); |
| break; |
| case 2: |
| /* UART2 */ |
| out_8(&pm->pmcr0, 26); |
| clrbits_8(&gpio->par_uart2, |
| ~(GPIO_PAR_UART2_U2RXD_MASK | GPIO_PAR_UART2_U2TXD_MASK)); |
| setbits_8(&gpio->par_uart2, |
| GPIO_PAR_UART2_U2RXD_U2RXD | GPIO_PAR_UART2_U2TXD_U2TXD); |
| break; |
| case 3: |
| /* UART3 */ |
| out_8(&pm->pmcr0, 27); |
| clrbits_8(&gpio->par_dspi0, |
| ~(GPIO_PAR_DSPI0_SIN_MASK | GPIO_PAR_DSPI0_SOUT_MASK)); |
| setbits_8(&gpio->par_dspi0, |
| GPIO_PAR_DSPI0_SIN_U3RXD | GPIO_PAR_DSPI0_SOUT_U3TXD); |
| break; |
| case 4: |
| /* UART4 */ |
| out_8(&pm->pmcr1, 24); |
| clrbits_8(&gpio->par_uart0, |
| ~(GPIO_PAR_UART0_U0CTS_MASK | GPIO_PAR_UART0_U0RTS_MASK)); |
| setbits_8(&gpio->par_uart0, |
| GPIO_PAR_UART0_U0CTS_U4TXD | GPIO_PAR_UART0_U0RTS_U4RXD); |
| break; |
| case 5: |
| /* UART5 */ |
| out_8(&pm->pmcr1, 25); |
| clrbits_8(&gpio->par_uart1, |
| ~(GPIO_PAR_UART1_U1CTS_MASK | GPIO_PAR_UART1_U1RTS_MASK)); |
| setbits_8(&gpio->par_uart1, |
| GPIO_PAR_UART1_U1CTS_U5TXD | GPIO_PAR_UART1_U1RTS_U5RXD); |
| break; |
| case 6: |
| /* UART6 */ |
| out_8(&pm->pmcr1, 26); |
| clrbits_8(&gpio->par_uart2, |
| ~(GPIO_PAR_UART2_U2CTS_MASK | GPIO_PAR_UART2_U2RTS_MASK)); |
| setbits_8(&gpio->par_uart2, |
| GPIO_PAR_UART2_U2CTS_U6TXD | GPIO_PAR_UART2_U2RTS_U6RXD); |
| break; |
| case 7: |
| /* UART7 */ |
| out_8(&pm->pmcr1, 27); |
| clrbits_8(&gpio->par_ssi0h, ~GPIO_PAR_SSI0H_RXD_MASK); |
| clrbits_8(&gpio->par_ssi0l, ~GPIO_PAR_SSI0L_BCLK_MASK); |
| setbits_8(&gpio->par_ssi0h, GPIO_PAR_SSI0H_FS_U7TXD); |
| setbits_8(&gpio->par_ssi0l, GPIO_PAR_SSI0L_BCLK_U7RXD); |
| break; |
| case 8: |
| /* UART8 */ |
| out_8(&pm->pmcr0, 28); |
| clrbits_8(&gpio->par_cani2c, |
| ~(GPIO_PAR_CANI2C_I2C0SCL_MASK | GPIO_PAR_CANI2C_I2C0SDA_MASK)); |
| setbits_8(&gpio->par_cani2c, |
| GPIO_PAR_CANI2C_I2C0SCL_U8TXD | GPIO_PAR_CANI2C_I2C0SDA_U8RXD); |
| break; |
| case 9: |
| /* UART9 */ |
| out_8(&pm->pmcr1, 29); |
| clrbits_8(&gpio->par_cani2c, |
| ~(GPIO_PAR_CANI2C_CAN1TX_MASK | GPIO_PAR_CANI2C_CAN1RX_MASK)); |
| setbits_8(&gpio->par_cani2c, |
| GPIO_PAR_CANI2C_CAN1TX_U9TXD | GPIO_PAR_CANI2C_CAN1RX_U9RXD); |
| break; |
| #endif |
| } |
| } |
| |
| #if defined(CONFIG_CMD_NET) |
| int fecpin_setclear(fec_info_t *info, int setclear) |
| { |
| gpio_t *gpio = (gpio_t *) MMAP_GPIO; |
| u32 fec0_base; |
| |
| if (fec_get_base_addr(0, &fec0_base)) |
| return -1; |
| |
| #ifdef CONFIG_MCF5441x |
| if (setclear) { |
| out_8(&gpio->par_fec, 0x03); |
| out_8(&gpio->srcr_fec, 0x0F); |
| clrsetbits_8(&gpio->par_simp0h, ~GPIO_PAR_SIMP0H_DAT_MASK, |
| GPIO_PAR_SIMP0H_DAT_GPIO); |
| clrsetbits_8(&gpio->pddr_g, ~GPIO_PDDR_G4_MASK, |
| GPIO_PDDR_G4_OUTPUT); |
| clrbits_8(&gpio->podr_g, ~GPIO_PODR_G4_MASK); |
| |
| } else |
| clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC_MASK); |
| #endif |
| return 0; |
| } |
| #endif |