| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * |
| * (C) Copyright 2000-2003 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * Copyright (C) 2004-2009 Freescale Semiconductor, Inc. |
| * TsiChung Liew (Tsi-Chung.Liew@freescale.com) |
| * |
| * Support for DM and DT, non-DM code removed. |
| * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it> |
| * |
| * TODO: fsl_dspi.c should work as a driver for the DSPI module. |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <log.h> |
| #include <dm/platform_data/spi_coldfire.h> |
| #include <spi.h> |
| #include <malloc.h> |
| #include <asm/coldfire/dspi.h> |
| #include <asm/io.h> |
| |
| struct coldfire_spi_priv { |
| struct dspi *regs; |
| uint baudrate; |
| int mode; |
| int charbit; |
| }; |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #ifndef CONFIG_SPI_IDLE_VAL |
| #if defined(CONFIG_SPI_MMC) |
| #define CONFIG_SPI_IDLE_VAL 0xFFFF |
| #else |
| #define CONFIG_SPI_IDLE_VAL 0x0 |
| #endif |
| #endif |
| |
| /* |
| * DSPI specific mode |
| * |
| * bit 31 - 28: Transfer size 3 to 16 bits |
| * 27 - 26: PCS to SCK delay prescaler |
| * 25 - 24: After SCK delay prescaler |
| * 23 - 22: Delay after transfer prescaler |
| * 21 : Allow overwrite for bit 31-22 and bit 20-8 |
| * 20 : Double baud rate |
| * 19 - 16: PCS to SCK delay scaler |
| * 15 - 12: After SCK delay scaler |
| * 11 - 8: Delay after transfer scaler |
| * 7 - 0: SPI_CPHA, SPI_CPOL, SPI_LSB_FIRST |
| */ |
| #define SPI_MODE_MOD 0x00200000 |
| #define SPI_MODE_DBLRATE 0x00100000 |
| |
| #define SPI_MODE_XFER_SZ_MASK 0xf0000000 |
| #define SPI_MODE_DLY_PRE_MASK 0x0fc00000 |
| #define SPI_MODE_DLY_SCA_MASK 0x000fff00 |
| |
| #define MCF_FRM_SZ_16BIT DSPI_CTAR_TRSZ(0xf) |
| #define MCF_DSPI_SPEED_BESTMATCH 0x7FFFFFFF |
| #define MCF_DSPI_MAX_CTAR_REGS 8 |
| |
| /* Default values */ |
| #define MCF_DSPI_DEFAULT_SCK_FREQ 10000000 |
| #define MCF_DSPI_DEFAULT_MAX_CS 4 |
| #define MCF_DSPI_DEFAULT_MODE 0 |
| |
| #define MCF_DSPI_DEFAULT_CTAR (DSPI_CTAR_TRSZ(7) | \ |
| DSPI_CTAR_PCSSCK_1CLK | \ |
| DSPI_CTAR_PASC(0) | \ |
| DSPI_CTAR_PDT(0) | \ |
| DSPI_CTAR_CSSCK(0) | \ |
| DSPI_CTAR_ASC(0) | \ |
| DSPI_CTAR_DT(1) | \ |
| DSPI_CTAR_BR(6)) |
| |
| #define MCF_CTAR_MODE_MASK (MCF_FRM_SZ_16BIT | \ |
| DSPI_CTAR_PCSSCK(3) | \ |
| DSPI_CTAR_PASC_7CLK | \ |
| DSPI_CTAR_PDT(3) | \ |
| DSPI_CTAR_CSSCK(0x0f) | \ |
| DSPI_CTAR_ASC(0x0f) | \ |
| DSPI_CTAR_DT(0x0f)) |
| |
| #define setup_ctrl(ctrl, cs) ((ctrl & 0xFF000000) | ((1 << cs) << 16)) |
| |
| static inline void cfspi_tx(struct coldfire_spi_priv *cfspi, |
| u32 ctrl, u16 data) |
| { |
| /* |
| * Need to check fifo level here |
| */ |
| while ((readl(&cfspi->regs->sr) & 0x0000F000) >= 0x4000) |
| ; |
| |
| writel(ctrl | data, &cfspi->regs->tfr); |
| } |
| |
| static inline u16 cfspi_rx(struct coldfire_spi_priv *cfspi) |
| { |
| |
| while ((readl(&cfspi->regs->sr) & 0x000000F0) == 0) |
| ; |
| |
| return readw(&cfspi->regs->rfr); |
| } |
| |
| static int coldfire_spi_claim_bus(struct udevice *dev) |
| { |
| struct udevice *bus = dev->parent; |
| struct coldfire_spi_priv *cfspi = dev_get_priv(bus); |
| struct dspi *dspi = cfspi->regs; |
| struct dm_spi_slave_platdata *slave_plat = |
| dev_get_parent_platdata(dev); |
| |
| if ((in_be32(&dspi->sr) & DSPI_SR_TXRXS) != DSPI_SR_TXRXS) |
| return -1; |
| |
| /* Clear FIFO and resume transfer */ |
| clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF); |
| |
| dspi_chip_select(slave_plat->cs); |
| |
| return 0; |
| } |
| |
| static int coldfire_spi_release_bus(struct udevice *dev) |
| { |
| struct udevice *bus = dev->parent; |
| struct coldfire_spi_priv *cfspi = dev_get_priv(bus); |
| struct dspi *dspi = cfspi->regs; |
| struct dm_spi_slave_platdata *slave_plat = |
| dev_get_parent_platdata(dev); |
| |
| /* Clear FIFO */ |
| clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF); |
| |
| dspi_chip_unselect(slave_plat->cs); |
| |
| return 0; |
| } |
| |
| static int coldfire_spi_xfer(struct udevice *dev, unsigned int bitlen, |
| const void *dout, void *din, |
| unsigned long flags) |
| { |
| struct udevice *bus = dev_get_parent(dev); |
| struct coldfire_spi_priv *cfspi = dev_get_priv(bus); |
| struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); |
| u16 *spi_rd16 = NULL, *spi_wr16 = NULL; |
| u8 *spi_rd = NULL, *spi_wr = NULL; |
| static u32 ctrl; |
| uint len = bitlen >> 3; |
| |
| if (cfspi->charbit == 16) { |
| bitlen >>= 1; |
| spi_wr16 = (u16 *)dout; |
| spi_rd16 = (u16 *)din; |
| } else { |
| spi_wr = (u8 *)dout; |
| spi_rd = (u8 *)din; |
| } |
| |
| if ((flags & SPI_XFER_BEGIN) == SPI_XFER_BEGIN) |
| ctrl |= DSPI_TFR_CONT; |
| |
| ctrl = setup_ctrl(ctrl, slave_plat->cs); |
| |
| if (len > 1) { |
| int tmp_len = len - 1; |
| |
| while (tmp_len--) { |
| if (dout) { |
| if (cfspi->charbit == 16) |
| cfspi_tx(cfspi, ctrl, *spi_wr16++); |
| else |
| cfspi_tx(cfspi, ctrl, *spi_wr++); |
| cfspi_rx(cfspi); |
| } |
| |
| if (din) { |
| cfspi_tx(cfspi, ctrl, CONFIG_SPI_IDLE_VAL); |
| if (cfspi->charbit == 16) |
| *spi_rd16++ = cfspi_rx(cfspi); |
| else |
| *spi_rd++ = cfspi_rx(cfspi); |
| } |
| } |
| |
| len = 1; /* remaining byte */ |
| } |
| |
| if (flags & SPI_XFER_END) |
| ctrl &= ~DSPI_TFR_CONT; |
| |
| if (len) { |
| if (dout) { |
| if (cfspi->charbit == 16) |
| cfspi_tx(cfspi, ctrl, *spi_wr16); |
| else |
| cfspi_tx(cfspi, ctrl, *spi_wr); |
| cfspi_rx(cfspi); |
| } |
| |
| if (din) { |
| cfspi_tx(cfspi, ctrl, CONFIG_SPI_IDLE_VAL); |
| if (cfspi->charbit == 16) |
| *spi_rd16 = cfspi_rx(cfspi); |
| else |
| *spi_rd = cfspi_rx(cfspi); |
| } |
| } else { |
| /* dummy read */ |
| cfspi_tx(cfspi, ctrl, CONFIG_SPI_IDLE_VAL); |
| cfspi_rx(cfspi); |
| } |
| |
| return 0; |
| } |
| |
| static int coldfire_spi_set_speed(struct udevice *bus, uint max_hz) |
| { |
| struct coldfire_spi_priv *cfspi = dev_get_priv(bus); |
| struct dspi *dspi = cfspi->regs; |
| int prescaler[] = { 2, 3, 5, 7 }; |
| int scaler[] = { |
| 2, 4, 6, 8, |
| 16, 32, 64, 128, |
| 256, 512, 1024, 2048, |
| 4096, 8192, 16384, 32768 |
| }; |
| int i, j, pbrcnt, brcnt, diff, tmp, dbr = 0; |
| int best_i, best_j, bestmatch = MCF_DSPI_SPEED_BESTMATCH, baud_speed; |
| u32 bus_setup; |
| |
| cfspi->baudrate = max_hz; |
| |
| /* Read current setup */ |
| bus_setup = readl(&dspi->ctar[bus->seq]); |
| |
| tmp = (prescaler[3] * scaler[15]); |
| /* Maximum and minimum baudrate it can handle */ |
| if ((cfspi->baudrate > (gd->bus_clk >> 1)) || |
| (cfspi->baudrate < (gd->bus_clk / tmp))) { |
| printf("Exceed baudrate limitation: Max %d - Min %d\n", |
| (int)(gd->bus_clk >> 1), (int)(gd->bus_clk / tmp)); |
| return -1; |
| } |
| |
| /* Activate Double Baud when it exceed 1/4 the bus clk */ |
| if ((bus_setup & DSPI_CTAR_DBR) || |
| (cfspi->baudrate > (gd->bus_clk / (prescaler[0] * scaler[0])))) { |
| bus_setup |= DSPI_CTAR_DBR; |
| dbr = 1; |
| } |
| |
| /* Overwrite default value set in platform configuration file */ |
| if (cfspi->mode & SPI_MODE_MOD) { |
| /* |
| * Check to see if it is enabled by default in platform |
| * config, or manual setting passed by mode parameter |
| */ |
| if (cfspi->mode & SPI_MODE_DBLRATE) { |
| bus_setup |= DSPI_CTAR_DBR; |
| dbr = 1; |
| } |
| } |
| |
| pbrcnt = sizeof(prescaler) / sizeof(int); |
| brcnt = sizeof(scaler) / sizeof(int); |
| |
| /* baudrate calculation - to closer value, may not be exact match */ |
| for (best_i = 0, best_j = 0, i = 0; i < pbrcnt; i++) { |
| baud_speed = gd->bus_clk / prescaler[i]; |
| for (j = 0; j < brcnt; j++) { |
| tmp = (baud_speed / scaler[j]) * (1 + dbr); |
| |
| if (tmp > cfspi->baudrate) |
| diff = tmp - cfspi->baudrate; |
| else |
| diff = cfspi->baudrate - tmp; |
| |
| if (diff < bestmatch) { |
| bestmatch = diff; |
| best_i = i; |
| best_j = j; |
| } |
| } |
| } |
| |
| bus_setup &= ~(DSPI_CTAR_PBR(0x03) | DSPI_CTAR_BR(0x0f)); |
| bus_setup |= (DSPI_CTAR_PBR(best_i) | DSPI_CTAR_BR(best_j)); |
| writel(bus_setup, &dspi->ctar[bus->seq]); |
| |
| return 0; |
| } |
| |
| static int coldfire_spi_set_mode(struct udevice *bus, uint mode) |
| { |
| struct coldfire_spi_priv *cfspi = dev_get_priv(bus); |
| struct dspi *dspi = cfspi->regs; |
| u32 bus_setup = 0; |
| |
| cfspi->mode = mode; |
| |
| if (cfspi->mode & SPI_CPOL) |
| bus_setup |= DSPI_CTAR_CPOL; |
| if (cfspi->mode & SPI_CPHA) |
| bus_setup |= DSPI_CTAR_CPHA; |
| if (cfspi->mode & SPI_LSB_FIRST) |
| bus_setup |= DSPI_CTAR_LSBFE; |
| |
| /* Overwrite default value set in platform configuration file */ |
| if (cfspi->mode & SPI_MODE_MOD) { |
| if ((cfspi->mode & SPI_MODE_XFER_SZ_MASK) == 0) |
| bus_setup |= |
| readl(&dspi->ctar[bus->seq]) & MCF_FRM_SZ_16BIT; |
| else |
| bus_setup |= |
| ((cfspi->mode & SPI_MODE_XFER_SZ_MASK) >> 1); |
| |
| /* PSCSCK, PASC, PDT */ |
| bus_setup |= (cfspi->mode & SPI_MODE_DLY_PRE_MASK) >> 4; |
| /* CSSCK, ASC, DT */ |
| bus_setup |= (cfspi->mode & SPI_MODE_DLY_SCA_MASK) >> 4; |
| } else { |
| bus_setup |= |
| (readl(&dspi->ctar[bus->seq]) & MCF_CTAR_MODE_MASK); |
| } |
| |
| cfspi->charbit = |
| ((readl(&dspi->ctar[bus->seq]) & MCF_FRM_SZ_16BIT) == |
| MCF_FRM_SZ_16BIT) ? 16 : 8; |
| |
| setbits_be32(&dspi->ctar[bus->seq], bus_setup); |
| |
| return 0; |
| } |
| |
| static int coldfire_spi_probe(struct udevice *bus) |
| { |
| struct coldfire_spi_platdata *plat = dev_get_platdata(bus); |
| struct coldfire_spi_priv *cfspi = dev_get_priv(bus); |
| struct dspi *dspi = cfspi->regs; |
| int i; |
| |
| cfspi->regs = (struct dspi *)plat->regs_addr; |
| |
| cfspi->baudrate = plat->speed_hz; |
| cfspi->mode = plat->mode; |
| |
| for (i = 0; i < MCF_DSPI_MAX_CTAR_REGS; i++) { |
| unsigned int ctar = 0; |
| |
| if (plat->ctar[i][0] == 0) |
| break; |
| |
| ctar = DSPI_CTAR_TRSZ(plat->ctar[i][0]) | |
| DSPI_CTAR_PCSSCK(plat->ctar[i][1]) | |
| DSPI_CTAR_PASC(plat->ctar[i][2]) | |
| DSPI_CTAR_PDT(plat->ctar[i][3]) | |
| DSPI_CTAR_CSSCK(plat->ctar[i][4]) | |
| DSPI_CTAR_ASC(plat->ctar[i][5]) | |
| DSPI_CTAR_DT(plat->ctar[i][6]) | |
| DSPI_CTAR_BR(plat->ctar[i][7]); |
| |
| writel(ctar, &cfspi->regs->ctar[i]); |
| } |
| |
| /* Default CTARs */ |
| for (i = 0; i < MCF_DSPI_MAX_CTAR_REGS; i++) |
| writel(MCF_DSPI_DEFAULT_CTAR, &dspi->ctar[i]); |
| |
| dspi->mcr = DSPI_MCR_MSTR | DSPI_MCR_CSIS7 | DSPI_MCR_CSIS6 | |
| DSPI_MCR_CSIS5 | DSPI_MCR_CSIS4 | DSPI_MCR_CSIS3 | |
| DSPI_MCR_CSIS2 | DSPI_MCR_CSIS1 | DSPI_MCR_CSIS0 | |
| DSPI_MCR_CRXF | DSPI_MCR_CTXF; |
| |
| return 0; |
| } |
| |
| #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) |
| static int coldfire_dspi_ofdata_to_platdata(struct udevice *bus) |
| { |
| fdt_addr_t addr; |
| struct coldfire_spi_platdata *plat = bus->platdata; |
| const void *blob = gd->fdt_blob; |
| int node = dev_of_offset(bus); |
| int *ctar, len; |
| |
| addr = dev_read_addr(bus); |
| if (addr == FDT_ADDR_T_NONE) |
| return -ENOMEM; |
| |
| plat->regs_addr = addr; |
| |
| plat->num_cs = fdtdec_get_int(blob, node, "num-cs", |
| MCF_DSPI_DEFAULT_MAX_CS); |
| |
| plat->speed_hz = fdtdec_get_int(blob, node, "spi-max-frequency", |
| MCF_DSPI_DEFAULT_SCK_FREQ); |
| |
| plat->mode = fdtdec_get_int(blob, node, "spi-mode", |
| MCF_DSPI_DEFAULT_MODE); |
| |
| memset(plat->ctar, 0, sizeof(plat->ctar)); |
| |
| ctar = (int *)fdt_getprop(blob, node, "ctar-params", &len); |
| |
| if (ctar && len) { |
| int i, q, ctar_regs; |
| |
| ctar_regs = len / sizeof(unsigned int) / MAX_CTAR_FIELDS; |
| |
| if (ctar_regs > MAX_CTAR_REGS) |
| ctar_regs = MAX_CTAR_REGS; |
| |
| for (i = 0; i < ctar_regs; i++) { |
| for (q = 0; q < MAX_CTAR_FIELDS; q++) |
| plat->ctar[i][q] = *ctar++; |
| } |
| } |
| |
| debug("DSPI: regs=%pa, max-frequency=%d, num-cs=%d, mode=%d\n", |
| (void *)plat->regs_addr, |
| plat->speed_hz, plat->num_cs, plat->mode); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id coldfire_spi_ids[] = { |
| { .compatible = "fsl,mcf-dspi" }, |
| { } |
| }; |
| #endif |
| |
| static const struct dm_spi_ops coldfire_spi_ops = { |
| .claim_bus = coldfire_spi_claim_bus, |
| .release_bus = coldfire_spi_release_bus, |
| .xfer = coldfire_spi_xfer, |
| .set_speed = coldfire_spi_set_speed, |
| .set_mode = coldfire_spi_set_mode, |
| }; |
| |
| U_BOOT_DRIVER(coldfire_spi) = { |
| .name = "spi_coldfire", |
| .id = UCLASS_SPI, |
| #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) |
| .of_match = coldfire_spi_ids, |
| .ofdata_to_platdata = coldfire_dspi_ofdata_to_platdata, |
| .platdata_auto = sizeof(struct coldfire_spi_platdata), |
| #endif |
| .probe = coldfire_spi_probe, |
| .ops = &coldfire_spi_ops, |
| .priv_auto = sizeof(struct coldfire_spi_priv), |
| }; |