CONFIG_ARM=y | |
CONFIG_TARGET_LS2080AQDS=y | |
CONFIG_SYS_TEXT_BASE=0x80400000 | |
CONFIG_SPL_LIBCOMMON_SUPPORT=y | |
CONFIG_SPL_LIBGENERIC_SUPPORT=y | |
CONFIG_FSL_LS_PPA=y | |
CONFIG_SPL_MMC_SUPPORT=y | |
CONFIG_SPL_SERIAL_SUPPORT=y | |
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y | |
CONFIG_SPL=y | |
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds" | |
CONFIG_FIT_VERBOSE=y | |
CONFIG_OF_BOARD_SETUP=y | |
CONFIG_OF_STDOUT_VIA_ALIAS=y | |
CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" | |
CONFIG_SD_BOOT=y | |
CONFIG_BOOTDELAY=10 | |
CONFIG_USE_BOOTARGS=y | |
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" | |
# CONFIG_USE_BOOTCOMMAND is not set | |
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y | |
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 | |
CONFIG_SPL_ENV_SUPPORT=y | |
CONFIG_SPL_I2C_SUPPORT=y | |
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y | |
CONFIG_CMD_GREPENV=y | |
CONFIG_CMD_I2C=y | |
CONFIG_CMD_MMC=y | |
CONFIG_CMD_NAND=y | |
CONFIG_CMD_PCI=y | |
CONFIG_CMD_SF=y | |
CONFIG_CMD_USB=y | |
# CONFIG_CMD_SETEXPR is not set | |
CONFIG_CMD_CACHE=y | |
CONFIG_CMD_DATE=y | |
CONFIG_MP=y | |
CONFIG_OF_CONTROL=y | |
CONFIG_OF_EMBED=y | |
CONFIG_ENV_IS_IN_MMC=y | |
CONFIG_NET_RANDOM_ETHADDR=y | |
CONFIG_DM=y | |
CONFIG_FSL_ESDHC=y | |
CONFIG_DM_SPI_FLASH=y | |
CONFIG_PHYLIB=y | |
CONFIG_NETDEVICES=y | |
CONFIG_PHY_GIGE=y | |
CONFIG_E1000=y | |
CONFIG_PCI=y | |
CONFIG_DM_PCI=y | |
CONFIG_DM_PCI_COMPAT=y | |
CONFIG_PCIE_LAYERSCAPE=y | |
CONFIG_SYS_NS16550=y | |
CONFIG_SPI=y | |
CONFIG_DM_SPI=y | |
CONFIG_FSL_QSPI=y | |
CONFIG_USB=y | |
CONFIG_DM_USB=y | |
CONFIG_USB_XHCI_HCD=y | |
CONFIG_USB_XHCI_DWC3=y | |
CONFIG_USB_STORAGE=y | |
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y |