| /* |
| * (C) Copyright 2002 |
| * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net |
| * |
| * (C) Copyright 2002 |
| * Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * Marius Groeger <mgroeger@sysgo.de> |
| * |
| * Configuation settings for the Zylonite board. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| #define CONFIG_CPU_MONAHANS 1 /* Intel Monahan CPU */ |
| #define CONFIG_ZYLONITE 1 /* Zylonite board */ |
| /* #define CONFIG_LCD 1 */ |
| #ifdef CONFIG_LCD |
| #define CONFIG_SHARP_LM8V31 |
| #endif |
| /* #define CONFIG_MMC 1 */ |
| #define BOARD_LATE_INIT 1 |
| |
| #undef CONFIG_SKIP_RELOCATE_UBOOT |
| #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ |
| |
| /* |
| * Size of malloc() pool |
| */ |
| #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) |
| #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ |
| |
| /* |
| * Hardware drivers |
| */ |
| |
| #undef TURN_ON_ETHERNET |
| #ifdef TURN_ON_ETHERNET |
| # define CONFIG_DRIVER_SMC91111 1 |
| # define CONFIG_SMC91111_BASE 0x14000300 |
| # define CONFIG_SMC91111_EXT_PHY |
| # define CONFIG_SMC_USE_32_BIT |
| # undef CONFIG_SMC_USE_IOFUNCS |
| #endif |
| |
| /* |
| * select serial console configuration |
| */ |
| #define CONFIG_FFUART 1 |
| |
| /* allow to overwrite serial and ethaddr */ |
| #define CONFIG_ENV_OVERWRITE |
| |
| #define CONFIG_BAUDRATE 115200 |
| |
| /* #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT) */ |
| #ifdef TURN_ON_ETHERNET |
| # define CONFIG_COMMANDS (CONFIG_CMD_DFL) |
| #else |
| # define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_NET) |
| #endif |
| |
| |
| /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ |
| #include <cmd_confdefs.h> |
| |
| #define CONFIG_BOOTDELAY 3 |
| #define CONFIG_ETHADDR 08:00:3e:26:0a:5b |
| #define CONFIG_NETMASK 255.255.0.0 |
| #define CONFIG_IPADDR 192.168.0.21 |
| #define CONFIG_SERVERIP 192.168.0.250 |
| #define CONFIG_BOOTCOMMAND "bootm 80000" |
| #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" |
| #define CONFIG_CMDLINE_TAG |
| #define CONFIG_TIMESTAMP |
| |
| #if (CONFIG_COMMANDS & CFG_CMD_KGDB) |
| #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
| #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ |
| #endif |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CFG_HUSH_PARSER 1 |
| #define CFG_PROMPT_HUSH_PS2 "> " |
| |
| #define CFG_LONGHELP /* undef to save memory */ |
| #ifdef CFG_HUSH_PARSER |
| #define CFG_PROMPT "$ " /* Monitor Command Prompt */ |
| #else |
| #define CFG_PROMPT "=> " /* Monitor Command Prompt */ |
| #endif |
| #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ |
| #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ |
| #define CFG_MAXARGS 16 /* max number of command args */ |
| #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ |
| #define CFG_DEVICE_NULLDEV 1 |
| |
| #define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ |
| #define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ |
| |
| #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ |
| |
| #define CFG_LOAD_ADDR (CFG_DRAM_BASE + 0x8000) /* default load address */ |
| |
| #define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ |
| #define CFG_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ |
| |
| /* valid baudrates */ |
| #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
| |
| /* #define CFG_MMC_BASE 0xF0000000 */ |
| |
| /* |
| * Stack sizes |
| * |
| * The stack sizes are set up in start.S using the settings below |
| */ |
| #define CONFIG_STACKSIZE (128*1024) /* regular stack */ |
| #ifdef CONFIG_USE_IRQ |
| #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ |
| #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ |
| #endif |
| |
| /* |
| * Physical Memory Map |
| */ |
| #define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ |
| #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ |
| #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ |
| #define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ |
| #define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ |
| #define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ |
| #define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ |
| #define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ |
| #define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ |
| |
| #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ |
| #define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ |
| #define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ |
| #define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ |
| #define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ |
| |
| #define CFG_DRAM_BASE 0xa0000000 |
| #define CFG_DRAM_SIZE 0x04000000 |
| |
| #define CFG_FLASH_BASE PHYS_FLASH_1 |
| |
| #define FPGA_REGS_BASE_PHYSICAL 0x08000000 |
| |
| /* |
| * GPIO settings |
| */ |
| #define CFG_GPSR0_VAL 0x00008000 |
| #define CFG_GPSR1_VAL 0x00FC0382 |
| #define CFG_GPSR2_VAL 0x0001FFFF |
| #define CFG_GPCR0_VAL 0x00000000 |
| #define CFG_GPCR1_VAL 0x00000000 |
| #define CFG_GPCR2_VAL 0x00000000 |
| #define CFG_GPDR0_VAL 0x0060A800 |
| #define CFG_GPDR1_VAL 0x00FF0382 |
| #define CFG_GPDR2_VAL 0x0001C000 |
| #define CFG_GAFR0_L_VAL 0x98400000 |
| #define CFG_GAFR0_U_VAL 0x00002950 |
| #define CFG_GAFR1_L_VAL 0x000A9558 |
| #define CFG_GAFR1_U_VAL 0x0005AAAA |
| #define CFG_GAFR2_L_VAL 0xA0000000 |
| #define CFG_GAFR2_U_VAL 0x00000002 |
| |
| #define CFG_PSSR_VAL 0x20 |
| |
| /* |
| * Memory settings |
| */ |
| #define CFG_MSC0_VAL 0x23F223F2 |
| #define CFG_MSC1_VAL 0x3FF1A441 |
| #define CFG_MSC2_VAL 0x7FF97FF1 |
| #define CFG_MDCNFG_VAL 0x00001AC9 |
| #define CFG_MDREFR_VAL 0x00018018 |
| #define CFG_MDMRS_VAL 0x00000000 |
| |
| /* |
| * PCMCIA and CF Interfaces |
| */ |
| #define CFG_MECR_VAL 0x00000000 |
| #define CFG_MCMEM0_VAL 0x00010504 |
| #define CFG_MCMEM1_VAL 0x00010504 |
| #define CFG_MCATT0_VAL 0x00010504 |
| #define CFG_MCATT1_VAL 0x00010504 |
| #define CFG_MCIO0_VAL 0x00004715 |
| #define CFG_MCIO1_VAL 0x00004715 |
| |
| #define _LED 0x08000010 |
| #define LED_BLANK 0x08000040 |
| |
| /* |
| * FLASH and environment organization |
| */ |
| #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ |
| #define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ |
| |
| /* timeout values are in ticks */ |
| #define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ |
| #define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ |
| |
| /* NOTE: many default partitioning schemes assume the kernel starts at the |
| * second sector, not an environment. You have been warned! |
| */ |
| #define CFG_MONITOR_LEN PHYS_FLASH_SECT_SIZE |
| #undef CFG_ENV_IS_IN_FLASH |
| #define CFG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE) |
| #define CFG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE |
| #define CFG_ENV_SIZE (PHYS_FLASH_SECT_SIZE / 16) |
| |
| |
| /* |
| * FPGA Offsets |
| */ |
| #define WHOAMI_OFFSET 0x00 |
| #define HEXLED_OFFSET 0x10 |
| #define BLANKLED_OFFSET 0x40 |
| #define DISCRETELED_OFFSET 0x40 |
| #define CNFG_SWITCHES_OFFSET 0x50 |
| #define USER_SWITCHES_OFFSET 0x60 |
| #define MISC_WR_OFFSET 0x80 |
| #define MISC_RD_OFFSET 0x90 |
| #define INT_MASK_OFFSET 0xC0 |
| #define INT_CLEAR_OFFSET 0xD0 |
| #define GP_OFFSET 0x100 |
| |
| #endif /* __CONFIG_H */ |