| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2021 Rockchip Electronics Co., Ltd |
| * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. |
| */ |
| |
| #include <common.h> |
| #include <spl.h> |
| #include <asm/armv8/mmu.h> |
| #include <asm/io.h> |
| #include <asm/arch-rockchip/hardware.h> |
| #include <asm/arch-rockchip/ioc_rk3588.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define FIREWALL_DDR_BASE 0xfe030000 |
| #define FW_DDR_MST5_REG 0x54 |
| #define FW_DDR_MST13_REG 0x74 |
| #define FW_DDR_MST21_REG 0x94 |
| #define FW_DDR_MST26_REG 0xa8 |
| #define FW_DDR_MST27_REG 0xac |
| #define FIREWALL_SYSMEM_BASE 0xfe038000 |
| #define FW_SYSM_MST5_REG 0x54 |
| #define FW_SYSM_MST13_REG 0x74 |
| #define FW_SYSM_MST21_REG 0x94 |
| #define FW_SYSM_MST26_REG 0xa8 |
| #define FW_SYSM_MST27_REG 0xac |
| |
| #define PMU1_IOC_BASE 0xfd5f0000 |
| #define PMU2_IOC_BASE 0xfd5f4000 |
| |
| #define BUS_IOC_BASE 0xfd5f8000 |
| #define BUS_IOC_GPIO2A_IOMUX_SEL_L 0x40 |
| #define BUS_IOC_GPIO2B_IOMUX_SEL_L 0x48 |
| #define BUS_IOC_GPIO2D_IOMUX_SEL_L 0x58 |
| #define BUS_IOC_GPIO2D_IOMUX_SEL_H 0x5c |
| #define BUS_IOC_GPIO3A_IOMUX_SEL_L 0x60 |
| |
| static struct mm_region rk3588_mem_map[] = { |
| { |
| .virt = 0x0UL, |
| .phys = 0x0UL, |
| .size = 0xf0000000UL, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | |
| PTE_BLOCK_INNER_SHARE |
| }, { |
| .virt = 0xf0000000UL, |
| .phys = 0xf0000000UL, |
| .size = 0x10000000UL, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | |
| PTE_BLOCK_NON_SHARE | |
| PTE_BLOCK_PXN | PTE_BLOCK_UXN |
| }, { |
| .virt = 0x900000000, |
| .phys = 0x900000000, |
| .size = 0x150000000, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | |
| PTE_BLOCK_NON_SHARE | |
| PTE_BLOCK_PXN | PTE_BLOCK_UXN |
| }, { |
| /* List terminator */ |
| 0, |
| } |
| }; |
| |
| struct mm_region *mem_map = rk3588_mem_map; |
| |
| /* GPIO0B_IOMUX_SEL_H */ |
| enum { |
| GPIO0B5_SHIFT = 4, |
| GPIO0B5_MASK = GENMASK(7, 4), |
| GPIO0B5_REFER = 8, |
| GPIO0B5_UART2_TX_M0 = 10, |
| |
| GPIO0B6_SHIFT = 8, |
| GPIO0B6_MASK = GENMASK(11, 8), |
| GPIO0B6_REFER = 8, |
| GPIO0B6_UART2_RX_M0 = 10, |
| }; |
| |
| void board_debug_uart_init(void) |
| { |
| __maybe_unused static struct rk3588_bus_ioc * const bus_ioc = (void *)BUS_IOC_BASE; |
| static struct rk3588_pmu2_ioc * const pmu2_ioc = (void *)PMU2_IOC_BASE; |
| |
| /* Refer to BUS_IOC */ |
| rk_clrsetreg(&pmu2_ioc->gpio0b_iomux_sel_h, |
| GPIO0B6_MASK | GPIO0B5_MASK, |
| GPIO0B6_REFER << GPIO0B6_SHIFT | |
| GPIO0B5_REFER << GPIO0B5_SHIFT); |
| |
| /* UART2_M0 Switch iomux */ |
| rk_clrsetreg(&bus_ioc->gpio0b_iomux_sel_h, |
| GPIO0B6_MASK | GPIO0B5_MASK, |
| GPIO0B6_UART2_RX_M0 << GPIO0B6_SHIFT | |
| GPIO0B5_UART2_TX_M0 << GPIO0B5_SHIFT); |
| } |
| |
| #ifdef CONFIG_SPL_BUILD |
| void rockchip_stimer_init(void) |
| { |
| /* If Timer already enabled, don't re-init it */ |
| u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + 0x4); |
| |
| if (reg & 0x1) |
| return; |
| |
| asm volatile("msr CNTFRQ_EL0, %0" : : "r" (CONFIG_COUNTER_FREQUENCY)); |
| writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 0x14); |
| writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 0x18); |
| writel(0x1, CONFIG_ROCKCHIP_STIMER_BASE + 0x4); |
| } |
| #endif |
| |
| #ifndef CONFIG_TPL_BUILD |
| int arch_cpu_init(void) |
| { |
| #ifdef CONFIG_SPL_BUILD |
| int secure_reg; |
| |
| /* Set the SDMMC eMMC crypto_ns FSPI access secure area */ |
| secure_reg = readl(FIREWALL_DDR_BASE + FW_DDR_MST5_REG); |
| secure_reg &= 0xffff; |
| writel(secure_reg, FIREWALL_DDR_BASE + FW_DDR_MST5_REG); |
| secure_reg = readl(FIREWALL_DDR_BASE + FW_DDR_MST13_REG); |
| secure_reg &= 0xffff; |
| writel(secure_reg, FIREWALL_DDR_BASE + FW_DDR_MST13_REG); |
| secure_reg = readl(FIREWALL_DDR_BASE + FW_DDR_MST21_REG); |
| secure_reg &= 0xffff; |
| writel(secure_reg, FIREWALL_DDR_BASE + FW_DDR_MST21_REG); |
| secure_reg = readl(FIREWALL_DDR_BASE + FW_DDR_MST26_REG); |
| secure_reg &= 0xffff; |
| writel(secure_reg, FIREWALL_DDR_BASE + FW_DDR_MST26_REG); |
| secure_reg = readl(FIREWALL_DDR_BASE + FW_DDR_MST27_REG); |
| secure_reg &= 0xffff0000; |
| writel(secure_reg, FIREWALL_DDR_BASE + FW_DDR_MST27_REG); |
| |
| secure_reg = readl(FIREWALL_SYSMEM_BASE + FW_SYSM_MST5_REG); |
| secure_reg &= 0xffff; |
| writel(secure_reg, FIREWALL_SYSMEM_BASE + FW_SYSM_MST5_REG); |
| secure_reg = readl(FIREWALL_SYSMEM_BASE + FW_SYSM_MST13_REG); |
| secure_reg &= 0xffff; |
| writel(secure_reg, FIREWALL_SYSMEM_BASE + FW_SYSM_MST13_REG); |
| secure_reg = readl(FIREWALL_SYSMEM_BASE + FW_SYSM_MST21_REG); |
| secure_reg &= 0xffff; |
| writel(secure_reg, FIREWALL_SYSMEM_BASE + FW_SYSM_MST21_REG); |
| secure_reg = readl(FIREWALL_SYSMEM_BASE + FW_SYSM_MST26_REG); |
| secure_reg &= 0xffff; |
| writel(secure_reg, FIREWALL_SYSMEM_BASE + FW_SYSM_MST26_REG); |
| secure_reg = readl(FIREWALL_SYSMEM_BASE + FW_SYSM_MST27_REG); |
| secure_reg &= 0xffff0000; |
| writel(secure_reg, FIREWALL_SYSMEM_BASE + FW_SYSM_MST27_REG); |
| #endif |
| |
| return 0; |
| } |
| #endif |