include/configs/ixdp425.h - filogic/uboot - Gitiles

 /*
  * (C) Copyright 2003
  * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
  *
  * Configuation settings for the IXDP425 board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /*
  * High Level Configuration Options
  * (easy to change)
  */
 #define CONFIG_IXP425           1       /* This is an IXP425 CPU    */
 #define CONFIG_IXDP425          1       /* on an IXDP425 Board      */

 #define CONFIG_DISPLAY_CPUINFO	1	/* display cpu info (and speed)	*/
 #define CONFIG_DISPLAY_BOARDINFO 1	/* display board info		*/

 /*
  * select serial console configuration
  */
 #define CONFIG_IXP_SERIAL
 #define CONFIG_SYS_IXP425_CONSOLE	IXP425_UART1
 #define CONFIG_BAUDRATE         115200

 #define CONFIG_BOARD_EARLY_INIT_F	1

 /***************************************************************
  * U-boot generic defines start here.
  ***************************************************************/

 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN      (CONFIG_ENV_SIZE + 128*1024)

 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE

 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME

 /* Command line configuration. */
 #include <config_cmd_default.h>

 #define CONFIG_CMD_ELF

 #define CONFIG_PCI
 #ifdef CONFIG_PCI
 #define CONFIG_CMD_PCI
 #define CONFIG_PCI_PNP
 #define CONFIG_IXP_PCI
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_CMD_PCI_ENUM
 #define CONFIG_EEPRO100
 #endif

 #define CONFIG_BOOTCOMMAND		"run boot_flash"
 /* enable passing of ATAGs */
 #define CONFIG_CMDLINE_TAG		1
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_INITRD_TAG		1

 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE    230400          /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX   2               /* which serial port to use */
 #endif

 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
 #define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
 #define CONFIG_SYS_CBSIZE              256             /* Console I/O Buffer Size      */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS             16              /* max number of command args   */
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE      /* Boot Argument Buffer Size    */

 #define CONFIG_SYS_MEMTEST_START       0x00400000      /* memtest works on     */
 #define CONFIG_SYS_MEMTEST_END         0x00800000      /* 4 ... 8 MB in DRAM   */

 /* timer clock - 2* OSC_IN system clock */
 #define CONFIG_IXP425_TIMER_CLK                 66666666
 #define CONFIG_SYS_HZ				1000

 /* default load address */
 #define CONFIG_SYS_LOAD_ADDR			0x00010000

 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }

 /*
  * Stack sizes
  *
  * The stack sizes are set up in start.S using the settings below
  */
 #define CONFIG_STACKSIZE        (128*1024)      /* regular stack */

 /***************************************************************
  * Platform/Board specific defines start here.
  ***************************************************************/

 /*
  * Hardware drivers
  */


 /*
  * Physical Memory Map
  */
 #define CONFIG_SYS_TEXT_BASE	0x50000000

 #define PHYS_FLASH_1            0x50000000 /* Flash Bank #1 */
 #define PHYS_FLASH_SIZE         0x00800000 /* 8 MB */
 #define PHYS_FLASH_BANK_SIZE    0x00800000 /* 8 MB Banks */
 #define PHYS_FLASH_SECT_SIZE    0x00020000 /* 128 KB sectors (x1) */

 #define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #define CONFIG_BOARD_SIZE_LIMIT		262144

 /* Expansion bus settings */
 #define CONFIG_SYS_EXP_CS0	0xbcd23c42

 /* SDRAM settings */
 #define CONFIG_NR_DRAM_BANKS    1          /* we have 2 banks of DRAM */
 #define PHYS_SDRAM_1            0x00000000 /* SDRAM Bank #1 */
 #define CONFIG_SYS_SDRAM_BASE	0x00000000

 #define CONFIG_SYS_SDR_CONFIG		0xd
 #define CONFIG_SYS_SDR_MODE_CONFIG	0x1
 #define CONFIG_SYS_SDRAM_REFRESH_CNT	0x81a

 /*
  * FLASH and environment organization
  */
 #define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of memory banks           */
 #define CONFIG_SYS_MAX_FLASH_SECT      128	/* max number of sectors on one chip    */

 #define	CONFIG_ENV_IS_IN_FLASH	1

 #define CONFIG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1 }

 #define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

 #define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	*/
 #define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)
 #define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/

 /* Use common CFI driver */
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
 /* no byte writes on IXP4xx */
 #define CONFIG_SYS_FLASH_CFI_WIDTH		FLASH_CFI_16BIT
 /* print 'E' for empty sector on flinfo */
 #define CONFIG_SYS_FLASH_EMPTY_INFO

 /* Ethernet */

 /* include IXP4xx NPE support */
 #define CONFIG_IXP4XX_NPE		1
 #define CONFIG_NET_MULTI		1
 /* NPE0 PHY address */
 #define	CONFIG_PHY_ADDR			0
 /* NPE1 PHY address (HW Release E only) */
 #define	CONFIG_PHY1_ADDR		1
 /* MII PHY management */
 #define CONFIG_MII			1
 /* Number of ethernet rx buffers & descriptors */
 #define CONFIG_SYS_RX_ETH_BUFFER		16

 #define CONFIG_HAS_ETH1			1

 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
 #undef  CONFIG_CMD_NFS

 /* Cache Configuration */
 #define CONFIG_SYS_CACHELINE_SIZE		32

 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"npe_ucode=50060000\0"						\
 	"mtd=IXP4XX-Flash.0:256k(uboot),128k(env),128k(ucode),2048k(linux),-(root)\0" \
 	"kerneladdr=50080000\0"						\
 	"kernelfile=ixdp425/uImage\0"					\
 	"rootfile=ixdp425/rootfs\0"					\
 	"rootaddr=50280000\0"						\
 	"loadaddr=10000\0"						\
 	"updateboot_ser=mw.b 10000 ff 40000;"				\
 	" loady ${loadaddr};"						\
 	" run eraseboot writeboot\0"					\
 	"updateboot_net=mw.b 10000 ff 40000;"				\
 	" tftp ${loadaddr} ixdp425/u-boot.bin;"				\
 	" run eraseboot writeboot\0"					\
 	"eraseboot=protect off 50000000 5003ffff;"			\
 	" erase 50000000 5003ffff\0"					\
 	"writeboot=cp.b 10000 50000000 ${filesize}\0"			\
 	"updateucode=loady;"						\
 	" era ${npe_ucode} +${filesize};"				\
 	" cp.b ${loadaddr} ${npe_ucode} ${filesize}\0"			\
 	"updateroot=tftp ${loadaddr} ${rootfile};"			\
 	" era ${rootaddr} +${filesize};"				\
 	" cp.b ${loadaddr} ${rootaddr} ${filesize}\0"			\
 	"updatekern=tftp ${loadaddr} ${kernelfile};"			\
 	" era ${kerneladdr} +${filesize};"				\
 	" cp.b ${loadaddr} ${kerneladdr} ${filesize}\0"			\
 	"flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock4"	\
 	" rootfstype=squashfs,jffs2 init=/etc/preinit\0"		\
 	"netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock4"	\
 	" rootfstype=squashfs,jffs2 init=/etc/preinit\0"		\
 	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
 	"addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0"	\
 	"boot_flash=run flashargs addtty addeth;"			\
 	" bootm ${kerneladdr}\0"					\
 	"boot_net=run netargs addtty addeth;"				\
 	" tftpboot ${loadaddr} ${kernelfile};"				\
 	" bootm\0"

 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_INIT_SP_ADDR						\
 	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)


 /*
  * GPIO settings
  */
 #define CONFIG_SYS_GPIO_UTOPIA_GPIO1    0
 #define CONFIG_SYS_GPIO_UTOPIA_IRQ_N    1
 #define CONFIG_SYS_GPIO_HSS1_IRQ_N      2
 #define CONFIG_SYS_GPIO_HSS0_IRQ_N      3
 #define CONFIG_SYS_GPIO_ETH0_IRQ_N      4
 #define CONFIG_SYS_GPIO_ETH1_IRQ_N      5
 #define CONFIG_SYS_GPIO_I2C_SCL	        6
 #define CONFIG_SYS_GPIO_I2C_SDA	        7
 #define CONFIG_SYS_GPIO_PCI_INTD_N	8
 #define CONFIG_SYS_GPIO_PCI_INTC_N	9
 #define CONFIG_SYS_GPIO_PCI_INTB_N	10
 #define CONFIG_SYS_GPIO_PCI_INTA_N	11
 #define CONFIG_SYS_GPIO_UTOPIA_GPIO0	12
 #define CONFIG_SYS_GPIO_PCI_RESET_N	13
 #define CONFIG_SYS_GPIO_PCI_CLK	        14
 #define CONFIG_SYS_GPIO_EXTBUS_CLK	15

 #endif  /* __CONFIG_H */
	/*
	* (C) Copyright 2003
	* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
	*
	* Configuation settings for the IXDP425 board.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* High Level Configuration Options
	* (easy to change)
	*/
	#define CONFIG_IXP425 1 /* This is an IXP425 CPU */
	#define CONFIG_IXDP425 1 /* on an IXDP425 Board */

	#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */
	#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */

	/*
	* select serial console configuration
	*/
	#define CONFIG_IXP_SERIAL
	#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART1
	#define CONFIG_BAUDRATE 115200

	#define CONFIG_BOARD_EARLY_INIT_F 1

	/***************************************************************
	* U-boot generic defines start here.
	***************************************************************/

	/*
	* Size of malloc() pool
	*/
	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)

	/* allow to overwrite serial and ethaddr */
	#define CONFIG_ENV_OVERWRITE

	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_BOOTFILESIZE
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME

	/* Command line configuration. */
	#include <config_cmd_default.h>

	#define CONFIG_CMD_ELF

	#define CONFIG_PCI
	#ifdef CONFIG_PCI
	#define CONFIG_CMD_PCI
	#define CONFIG_PCI_PNP
	#define CONFIG_IXP_PCI
	#define CONFIG_PCI_SCAN_SHOW
	#define CONFIG_CMD_PCI_ENUM
	#define CONFIG_EEPRO100
	#endif

	#define CONFIG_BOOTCOMMAND "run boot_flash"
	/* enable passing of ATAGs */
	#define CONFIG_CMDLINE_TAG 1
	#define CONFIG_SETUP_MEMORY_TAGS 1
	#define CONFIG_INITRD_TAG 1

	#if defined(CONFIG_CMD_KGDB)
	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	#endif

	/* Miscellaneous configurable options */
	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

	#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
	#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */

	/* timer clock - 2* OSC_IN system clock */
	#define CONFIG_IXP425_TIMER_CLK 66666666
	#define CONFIG_SYS_HZ 1000

	/* default load address */
	#define CONFIG_SYS_LOAD_ADDR 0x00010000

	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }

	/*
	* Stack sizes
	*
	* The stack sizes are set up in start.S using the settings below
	*/
	#define CONFIG_STACKSIZE (1281024) / regular stack */

	/***************************************************************
	* Platform/Board specific defines start here.
	***************************************************************/

	/*
	* Hardware drivers
	*/



	/*
	* Physical Memory Map
	*/
	#define CONFIG_SYS_TEXT_BASE 0x50000000

	#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */
	#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */
	#define PHYS_FLASH_BANK_SIZE 0x00800000 /* 8 MB Banks */
	#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */

	#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	#define CONFIG_BOARD_SIZE_LIMIT 262144

	/* Expansion bus settings */
	#define CONFIG_SYS_EXP_CS0 0xbcd23c42

	/* SDRAM settings */
	#define CONFIG_NR_DRAM_BANKS 1 /* we have 2 banks of DRAM */
	#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
	#define CONFIG_SYS_SDRAM_BASE 0x00000000

	#define CONFIG_SYS_SDR_CONFIG 0xd
	#define CONFIG_SYS_SDR_MODE_CONFIG 0x1
	#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a

	/*
	* FLASH and environment organization
	*/
	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */

	#define CONFIG_ENV_IS_IN_FLASH 1

	#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 }

	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */

	#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
	#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)
	#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */

	/* Use common CFI driver */
	#define CONFIG_SYS_FLASH_CFI
	#define CONFIG_FLASH_CFI_DRIVER
	/* no byte writes on IXP4xx */
	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
	/* print 'E' for empty sector on flinfo */
	#define CONFIG_SYS_FLASH_EMPTY_INFO

	/* Ethernet */

	/* include IXP4xx NPE support */
	#define CONFIG_IXP4XX_NPE 1
	#define CONFIG_NET_MULTI 1
	/* NPE0 PHY address */
	#define CONFIG_PHY_ADDR 0
	/* NPE1 PHY address (HW Release E only) */
	#define CONFIG_PHY1_ADDR 1
	/* MII PHY management */
	#define CONFIG_MII 1
	/* Number of ethernet rx buffers & descriptors */
	#define CONFIG_SYS_RX_ETH_BUFFER 16

	#define CONFIG_HAS_ETH1 1

	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_NET
	#define CONFIG_CMD_MII
	#define CONFIG_CMD_PING
	#undef CONFIG_CMD_NFS

	/* Cache Configuration */
	#define CONFIG_SYS_CACHELINE_SIZE 32

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"npe_ucode=50060000\0" \
	"mtd=IXP4XX-Flash.0:256k(uboot),128k(env),128k(ucode),2048k(linux),-(root)\0" \
	"kerneladdr=50080000\0" \
	"kernelfile=ixdp425/uImage\0" \
	"rootfile=ixdp425/rootfs\0" \
	"rootaddr=50280000\0" \
	"loadaddr=10000\0" \
	"updateboot_ser=mw.b 10000 ff 40000;" \
	" loady ${loadaddr};" \
	" run eraseboot writeboot\0" \
	"updateboot_net=mw.b 10000 ff 40000;" \
	" tftp ${loadaddr} ixdp425/u-boot.bin;" \
	" run eraseboot writeboot\0" \
	"eraseboot=protect off 50000000 5003ffff;" \
	" erase 50000000 5003ffff\0" \
	"writeboot=cp.b 10000 50000000 ${filesize}\0" \
	"updateucode=loady;" \
	" era ${npe_ucode} +${filesize};" \
	" cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \
	"updateroot=tftp ${loadaddr} ${rootfile};" \
	" era ${rootaddr} +${filesize};" \
	" cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \
	"updatekern=tftp ${loadaddr} ${kernelfile};" \
	" era ${kerneladdr} +${filesize};" \
	" cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \
	"flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock4" \
	" rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
	"netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock4" \
	" rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
	"addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \
	"boot_flash=run flashargs addtty addeth;" \
	" bootm ${kerneladdr}\0" \
	"boot_net=run netargs addtty addeth;" \
	" tftpboot ${loadaddr} ${kernelfile};" \
	" bootm\0"

	/* additions for new relocation code, must be added to all boards */
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)


	/*
	* GPIO settings
	*/
	#define CONFIG_SYS_GPIO_UTOPIA_GPIO1 0
	#define CONFIG_SYS_GPIO_UTOPIA_IRQ_N 1
	#define CONFIG_SYS_GPIO_HSS1_IRQ_N 2
	#define CONFIG_SYS_GPIO_HSS0_IRQ_N 3
	#define CONFIG_SYS_GPIO_ETH0_IRQ_N 4
	#define CONFIG_SYS_GPIO_ETH1_IRQ_N 5
	#define CONFIG_SYS_GPIO_I2C_SCL 6
	#define CONFIG_SYS_GPIO_I2C_SDA 7
	#define CONFIG_SYS_GPIO_PCI_INTD_N 8
	#define CONFIG_SYS_GPIO_PCI_INTC_N 9
	#define CONFIG_SYS_GPIO_PCI_INTB_N 10
	#define CONFIG_SYS_GPIO_PCI_INTA_N 11
	#define CONFIG_SYS_GPIO_UTOPIA_GPIO0 12
	#define CONFIG_SYS_GPIO_PCI_RESET_N 13
	#define CONFIG_SYS_GPIO_PCI_CLK 14
	#define CONFIG_SYS_GPIO_EXTBUS_CLK 15

	#endif /* __CONFIG_H */