| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2022 Marek Vasut <marex@denx.de> |
| */ |
| |
| #include <asm/arch/clock.h> |
| #include <asm/arch/ddr.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/io.h> |
| #include <dm.h> |
| #include <env.h> |
| #include <env_internal.h> |
| #include <i2c_eeprom.h> |
| #include <malloc.h> |
| #include <net.h> |
| #include <miiphy.h> |
| #include <power/regulator.h> |
| |
| #include "lpddr4_timing.h" |
| #include "../common/dh_common.h" |
| #include "../common/dh_imx.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int mach_cpu_init(void) |
| { |
| icache_enable(); |
| return 0; |
| } |
| |
| int board_phys_sdram_size(phys_size_t *size) |
| { |
| const u16 memsz[] = { 512, 1024, 1536, 2048, 3072, 4096, 6144, 8192 }; |
| const u8 ecc = readl(DDRC_ECCCFG0(0)) & DDRC_ECCCFG0_ECC_MODE_MASK; |
| u8 memcfg = dh_get_memcfg(); |
| |
| /* 896 kiB, i.e. 1 MiB without 12.5% reserved for in-band ECC */ |
| *size = (u64)memsz[memcfg] * (SZ_1M - (ecc ? (SZ_1M / 8) : 0)); |
| |
| return 0; |
| } |
| |
| static int dh_imx8_setup_ethaddr(void) |
| { |
| unsigned char enetaddr[6]; |
| |
| if (dh_mac_is_in_env("ethaddr")) |
| return 0; |
| |
| if (dh_get_mac_is_enabled("ethernet0")) |
| return 0; |
| |
| if (!dh_imx_get_mac_from_fuse(enetaddr)) |
| goto out; |
| |
| if (!dh_get_mac_from_eeprom(enetaddr, "eeprom0")) |
| goto out; |
| |
| return -ENXIO; |
| |
| out: |
| return eth_env_set_enetaddr("ethaddr", enetaddr); |
| } |
| |
| static int dh_imx8_setup_eth1addr(void) |
| { |
| unsigned char enetaddr[6]; |
| |
| if (dh_mac_is_in_env("eth1addr")) |
| return 0; |
| |
| if (dh_get_mac_is_enabled("ethernet1")) |
| return 0; |
| |
| if (!dh_imx_get_mac_from_fuse(enetaddr)) |
| goto increment_out; |
| |
| if (!dh_get_mac_from_eeprom(enetaddr, "eeprom1")) |
| goto out; |
| |
| /* |
| * Populate second ethernet MAC from first ethernet EEPROM with MAC |
| * address LSByte incremented by 1. This is only used on SoMs without |
| * second ethernet EEPROM, i.e. early prototypes. |
| */ |
| if (!dh_get_mac_from_eeprom(enetaddr, "eeprom0")) |
| goto increment_out; |
| |
| return -ENXIO; |
| |
| increment_out: |
| enetaddr[5]++; |
| |
| out: |
| return eth_env_set_enetaddr("eth1addr", enetaddr); |
| } |
| |
| int dh_setup_mac_address(void) |
| { |
| int ret; |
| |
| ret = dh_imx8_setup_ethaddr(); |
| if (ret) |
| printf("%s: Unable to setup ethaddr! ret = %d\n", __func__, ret); |
| |
| ret = dh_imx8_setup_eth1addr(); |
| if (ret) |
| printf("%s: Unable to setup eth1addr! ret = %d\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| int board_init(void) |
| { |
| regulators_enable_boot_on(_DEBUG); |
| |
| return 0; |
| } |
| |
| int board_late_init(void) |
| { |
| dh_setup_mac_address(); |
| return 0; |
| } |
| |
| enum env_location env_get_location(enum env_operation op, int prio) |
| { |
| return prio ? ENVL_UNKNOWN : ENVL_SPI_FLASH; |
| } |