| if ARCH_IMX8 |
| |
| config AHAB_BOOT |
| bool "Support i.MX8 AHAB features" |
| imply CMD_DEKBLOB |
| help |
| This option enables the support for AHAB secure boot. |
| |
| config IMX8 |
| bool |
| select HAS_CAAM |
| |
| config MU_BASE_SPL |
| hex "MU base address used in SPL" |
| default 0x5d1b0000 |
| help |
| SPL runs in EL3 mode, it use MU0_A to communicate with SCU. |
| So we could not reuse the one in dts which is for normal U-Boot. |
| |
| config IMX8QM |
| select IMX8 |
| select SUPPORT_SPL |
| select SPL_RECOVER_DATA_SECTION if SPL |
| bool |
| |
| config IMX8QXP |
| select IMX8 |
| select SUPPORT_SPL |
| select SPL_RECOVER_DATA_SECTION if SPL |
| bool |
| |
| config SYS_SOC |
| default "imx8" |
| |
| config BOOTAUX_RESERVED_MEM_BASE |
| hex "i.MX auxiliary core dram memory base" |
| default 0x0 |
| |
| config BOOTAUX_RESERVED_MEM_SIZE |
| hex "i.MX auxiliary core dram memory size" |
| default 0x0 |
| |
| choice |
| prompt "i.MX8 board select" |
| optional |
| |
| config TARGET_APALIS_IMX8 |
| bool "Support Apalis iMX8 module" |
| select BOARD_LATE_INIT |
| select IMX8QM |
| |
| config TARGET_COLIBRI_IMX8X |
| bool "Support Colibri iMX8X module" |
| select BOARD_LATE_INIT |
| select IMX8QXP |
| |
| config TARGET_DENEB |
| bool "Support i.MX8QXP Capricorn Deneb board" |
| select BINMAN |
| select BOARD_LATE_INIT |
| select FACTORYSET |
| select IMX8QXP |
| |
| config TARGET_GIEDI |
| bool "Support i.MX8QXP Capricorn Giedi board" |
| select BINMAN |
| select BOARD_LATE_INIT |
| select FACTORYSET |
| select IMX8QXP |
| |
| config TARGET_IMX8QM_MEK |
| bool "Support i.MX8QM MEK board" |
| select BINMAN |
| select BOARD_LATE_INIT |
| select IMX8QM |
| select FSL_CAAM |
| select ARCH_MISC_INIT |
| select SPL_CRYPTO if SPL |
| |
| config TARGET_CONGA_QMX8 |
| bool "Support congatec conga-QMX8 board" |
| select BINMAN |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| select IMX8QM |
| |
| config TARGET_IMX8QM_ROM7720_A1 |
| bool "Support i.MX8QM ROM-7720-A1" |
| select BINMAN |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| select IMX8QM |
| |
| config TARGET_IMX8QM_DMSSE20_A1 |
| bool "Support i.MX8QM DMS-SE20-A1 board" |
| select BINMAN |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| select IMX8QM |
| |
| config TARGET_IMX8QXP_MEK |
| bool "Support i.MX8QXP MEK board" |
| select BINMAN |
| select BOARD_LATE_INIT |
| select IMX8QXP |
| select FSL_CAAM |
| select ARCH_MISC_INIT |
| select SPL_CRYPTO if SPL |
| |
| endchoice |
| |
| source "board/freescale/imx8qm_mek/Kconfig" |
| source "board/freescale/imx8qxp_mek/Kconfig" |
| source "board/congatec/cgtqmx8/Kconfig" |
| source "board/advantech/imx8qm_dmsse20_a1/Kconfig" |
| source "board/advantech/imx8qm_rom7720_a1/Kconfig" |
| source "board/toradex/apalis-imx8/Kconfig" |
| source "board/toradex/colibri-imx8x/Kconfig" |
| source "board/siemens/capricorn/Kconfig" |
| |
| config IMX_SNVS_SEC_SC |
| bool "Support SNVS configuration" |
| help |
| Allow to configure the SNVS via SCU API to configure tampers and secure |
| violation. |
| |
| config IMX_SNVS_SEC_SC_AUTO |
| bool "Support SNVS configuration command" |
| depends on IMX_SNVS_SEC_SC |
| help |
| This configuration will apply the selected configurations automatically |
| at boot. |
| |
| endif |