| /* |
| * clock_am33xx.c |
| * |
| * clocks for AM33XX based boards |
| * |
| * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/io.h> |
| |
| #define OSC (V_OSCK/1000000) |
| |
| struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER; |
| struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP; |
| struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL; |
| struct cm_rtc *const cmrtc = (struct cm_rtc *)CM_RTC; |
| |
| const struct dpll_regs dpll_mpu_regs = { |
| .cm_clkmode_dpll = CM_WKUP + 0x88, |
| .cm_idlest_dpll = CM_WKUP + 0x20, |
| .cm_clksel_dpll = CM_WKUP + 0x2C, |
| .cm_div_m2_dpll = CM_WKUP + 0xA8, |
| }; |
| |
| const struct dpll_regs dpll_core_regs = { |
| .cm_clkmode_dpll = CM_WKUP + 0x90, |
| .cm_idlest_dpll = CM_WKUP + 0x5C, |
| .cm_clksel_dpll = CM_WKUP + 0x68, |
| .cm_div_m4_dpll = CM_WKUP + 0x80, |
| .cm_div_m5_dpll = CM_WKUP + 0x84, |
| .cm_div_m6_dpll = CM_WKUP + 0xD8, |
| }; |
| |
| const struct dpll_regs dpll_per_regs = { |
| .cm_clkmode_dpll = CM_WKUP + 0x8C, |
| .cm_idlest_dpll = CM_WKUP + 0x70, |
| .cm_clksel_dpll = CM_WKUP + 0x9C, |
| .cm_div_m2_dpll = CM_WKUP + 0xAC, |
| }; |
| |
| const struct dpll_regs dpll_ddr_regs = { |
| .cm_clkmode_dpll = CM_WKUP + 0x94, |
| .cm_idlest_dpll = CM_WKUP + 0x34, |
| .cm_clksel_dpll = CM_WKUP + 0x40, |
| .cm_div_m2_dpll = CM_WKUP + 0xA0, |
| }; |
| |
| const struct dpll_regs dpll_disp_regs = { |
| .cm_clkmode_dpll = CM_WKUP + 0x98, |
| .cm_idlest_dpll = CM_WKUP + 0x48, |
| .cm_clksel_dpll = CM_WKUP + 0x54, |
| .cm_div_m2_dpll = CM_WKUP + 0xA4, |
| }; |
| |
| struct dpll_params dpll_mpu_opp100 = { |
| CONFIG_SYS_MPUCLK, OSC-1, 1, -1, -1, -1, -1}; |
| const struct dpll_params dpll_core_opp100 = { |
| 1000, OSC-1, -1, -1, 10, 8, 4}; |
| |
| const struct dpll_params dpll_mpu_opp[NUM_CRYSTAL_FREQ][NUM_OPPS] = { |
| { /* 19.2 MHz */ |
| {125, 3, 2, -1, -1, -1, -1}, /* OPP 50 */ |
| {-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */ |
| {125, 3, 1, -1, -1, -1, -1}, /* OPP 100 */ |
| {150, 3, 1, -1, -1, -1, -1}, /* OPP 120 */ |
| {125, 2, 1, -1, -1, -1, -1}, /* OPP TB */ |
| {625, 11, 1, -1, -1, -1, -1} /* OPP NT */ |
| }, |
| { /* 24 MHz */ |
| {25, 0, 2, -1, -1, -1, -1}, /* OPP 50 */ |
| {-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */ |
| {25, 0, 1, -1, -1, -1, -1}, /* OPP 100 */ |
| {30, 0, 1, -1, -1, -1, -1}, /* OPP 120 */ |
| {100, 3, 1, -1, -1, -1, -1}, /* OPP TB */ |
| {125, 2, 1, -1, -1, -1, -1} /* OPP NT */ |
| }, |
| { /* 25 MHz */ |
| {24, 0, 2, -1, -1, -1, -1}, /* OPP 50 */ |
| {-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */ |
| {24, 0, 1, -1, -1, -1, -1}, /* OPP 100 */ |
| {144, 4, 1, -1, -1, -1, -1}, /* OPP 120 */ |
| {32, 0, 1, -1, -1, -1, -1}, /* OPP TB */ |
| {40, 0, 1, -1, -1, -1, -1} /* OPP NT */ |
| }, |
| { /* 26 MHz */ |
| {300, 12, 2, -1, -1, -1, -1}, /* OPP 50 */ |
| {-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */ |
| {300, 12, 1, -1, -1, -1, -1}, /* OPP 100 */ |
| {360, 12, 1, -1, -1, -1, -1}, /* OPP 120 */ |
| {400, 12, 1, -1, -1, -1, -1}, /* OPP TB */ |
| {500, 12, 1, -1, -1, -1, -1} /* OPP NT */ |
| }, |
| }; |
| |
| const struct dpll_params dpll_core_1000MHz[NUM_CRYSTAL_FREQ] = { |
| {625, 11, -1, -1, 10, 8, 4}, /* 19.2 MHz */ |
| {125, 2, -1, -1, 10, 8, 4}, /* 24 MHz */ |
| {40, 0, -1, -1, 10, 8, 4}, /* 25 MHz */ |
| {500, 12, -1, -1, 10, 8, 4} /* 26 MHz */ |
| }; |
| |
| const struct dpll_params dpll_per_192MHz[NUM_CRYSTAL_FREQ] = { |
| {400, 7, 5, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {400, 9, 5, -1, -1, -1, -1}, /* 24 MHz */ |
| {384, 9, 5, -1, -1, -1, -1}, /* 25 MHz */ |
| {480, 12, 5, -1, -1, -1, -1} /* 26 MHz */ |
| }; |
| |
| const struct dpll_params dpll_ddr3_303MHz[NUM_CRYSTAL_FREQ] = { |
| {505, 15, 2, -1, -1, -1, -1}, /*19.2*/ |
| {101, 3, 2, -1, -1, -1, -1}, /* 24 MHz */ |
| {303, 24, 1, -1, 4, -1, -1}, /* 25 MHz */ |
| {303, 12, 2, -1, 4, -1, -1} /* 26 MHz */ |
| }; |
| |
| const struct dpll_params dpll_ddr3_400MHz[NUM_CRYSTAL_FREQ] = { |
| {125, 5, 1, -1, -1, -1, -1}, /*19.2*/ |
| {50, 2, 1, -1, -1, -1, -1}, /* 24 MHz */ |
| {16, 0, 1, -1, 4, -1, -1}, /* 25 MHz */ |
| {200, 12, 1, -1, 4, -1, -1} /* 26 MHz */ |
| }; |
| |
| const struct dpll_params dpll_ddr2_266MHz[NUM_CRYSTAL_FREQ] = { |
| {665, 47, 1, -1, -1, -1, -1}, /*19.2*/ |
| {133, 11, 1, -1, -1, -1, -1}, /* 24 MHz */ |
| {266, 24, 1, -1, 4, -1, -1}, /* 25 MHz */ |
| {133, 12, 1, -1, 4, -1, -1} /* 26 MHz */ |
| }; |
| |
| __weak const struct dpll_params *get_dpll_mpu_params(void) |
| { |
| return &dpll_mpu_opp100; |
| } |
| |
| const struct dpll_params *get_dpll_core_params(void) |
| { |
| int ind = get_sys_clk_index(); |
| |
| return &dpll_core_1000MHz[ind]; |
| } |
| |
| const struct dpll_params *get_dpll_per_params(void) |
| { |
| int ind = get_sys_clk_index(); |
| |
| return &dpll_per_192MHz[ind]; |
| } |
| |
| void setup_clocks_for_console(void) |
| { |
| clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, |
| CD_CLKCTRL_CLKTRCTRL_SW_WKUP << |
| CD_CLKCTRL_CLKTRCTRL_SHIFT); |
| |
| clrsetbits_le32(&cmper->l4hsclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, |
| CD_CLKCTRL_CLKTRCTRL_SW_WKUP << |
| CD_CLKCTRL_CLKTRCTRL_SHIFT); |
| |
| clrsetbits_le32(&cmwkup->wkup_uart0ctrl, |
| MODULE_CLKCTRL_MODULEMODE_MASK, |
| MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << |
| MODULE_CLKCTRL_MODULEMODE_SHIFT); |
| clrsetbits_le32(&cmper->uart1clkctrl, |
| MODULE_CLKCTRL_MODULEMODE_MASK, |
| MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << |
| MODULE_CLKCTRL_MODULEMODE_SHIFT); |
| clrsetbits_le32(&cmper->uart2clkctrl, |
| MODULE_CLKCTRL_MODULEMODE_MASK, |
| MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << |
| MODULE_CLKCTRL_MODULEMODE_SHIFT); |
| clrsetbits_le32(&cmper->uart3clkctrl, |
| MODULE_CLKCTRL_MODULEMODE_MASK, |
| MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << |
| MODULE_CLKCTRL_MODULEMODE_SHIFT); |
| clrsetbits_le32(&cmper->uart4clkctrl, |
| MODULE_CLKCTRL_MODULEMODE_MASK, |
| MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << |
| MODULE_CLKCTRL_MODULEMODE_SHIFT); |
| clrsetbits_le32(&cmper->uart5clkctrl, |
| MODULE_CLKCTRL_MODULEMODE_MASK, |
| MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << |
| MODULE_CLKCTRL_MODULEMODE_SHIFT); |
| } |
| |
| void enable_basic_clocks(void) |
| { |
| u32 *const clk_domains[] = { |
| &cmper->l3clkstctrl, |
| &cmper->l4fwclkstctrl, |
| &cmper->l3sclkstctrl, |
| &cmper->l4lsclkstctrl, |
| &cmwkup->wkclkstctrl, |
| &cmper->emiffwclkctrl, |
| &cmrtc->clkstctrl, |
| 0 |
| }; |
| |
| u32 *const clk_modules_explicit_en[] = { |
| &cmper->l3clkctrl, |
| &cmper->l4lsclkctrl, |
| &cmper->l4fwclkctrl, |
| &cmwkup->wkl4wkclkctrl, |
| &cmper->l3instrclkctrl, |
| &cmper->l4hsclkctrl, |
| &cmwkup->wkgpio0clkctrl, |
| &cmwkup->wkctrlclkctrl, |
| &cmper->timer2clkctrl, |
| &cmper->gpmcclkctrl, |
| &cmper->elmclkctrl, |
| &cmper->mmc0clkctrl, |
| &cmper->mmc1clkctrl, |
| &cmwkup->wkup_i2c0ctrl, |
| &cmper->gpio1clkctrl, |
| &cmper->gpio2clkctrl, |
| &cmper->gpio3clkctrl, |
| &cmper->i2c1clkctrl, |
| &cmper->cpgmac0clkctrl, |
| &cmper->spi0clkctrl, |
| &cmrtc->rtcclkctrl, |
| &cmper->usb0clkctrl, |
| &cmper->emiffwclkctrl, |
| &cmper->emifclkctrl, |
| 0 |
| }; |
| |
| do_enable_clocks(clk_domains, clk_modules_explicit_en, 1); |
| |
| /* Select the Master osc 24 MHZ as Timer2 clock source */ |
| writel(0x1, &cmdpll->clktimer2clk); |
| } |
| |
| /* |
| * Enable Spread Spectrum for the MPU by calculating the required |
| * values and setting the registers accordingly. |
| * @param permille The spreading in permille (10th of a percent) |
| */ |
| void set_mpu_spreadspectrum(int permille) |
| { |
| u32 multiplier_m; |
| u32 predivider_n; |
| u32 cm_clksel_dpll_mpu; |
| u32 cm_clkmode_dpll_mpu; |
| u32 ref_clock; |
| u32 pll_bandwidth; |
| u32 mod_freq_divider; |
| u32 exponent; |
| u32 mantissa; |
| u32 delta_m_step; |
| |
| printf("Enabling Spread Spectrum of %d permille for MPU\n", |
| permille); |
| |
| /* Read PLL parameter m and n */ |
| cm_clksel_dpll_mpu = readl(&cmwkup->clkseldpllmpu); |
| multiplier_m = (cm_clksel_dpll_mpu >> 8) & 0x3FF; |
| predivider_n = cm_clksel_dpll_mpu & 0x7F; |
| |
| /* |
| * Calculate reference clock (clock after pre-divider), |
| * its max. PLL bandwidth, |
| * and resulting mod_freq_divider |
| */ |
| ref_clock = V_OSCK / (predivider_n + 1); |
| pll_bandwidth = ref_clock / 70; |
| mod_freq_divider = ref_clock / (4 * pll_bandwidth); |
| |
| /* Calculate Mantissa/Exponent */ |
| exponent = 0; |
| mantissa = mod_freq_divider; |
| while ((mantissa > 127) && (exponent < 7)) { |
| exponent++; |
| mantissa /= 2; |
| } |
| if (mantissa > 127) |
| mantissa = 127; |
| |
| mod_freq_divider = mantissa << exponent; |
| |
| /* |
| * Calculate Modulation steps |
| * As we use Downspread only, the spread is twice the value of |
| * permille, so Div2! |
| * As it takes the value in percent, divide by ten! |
| */ |
| delta_m_step = ((u32)((multiplier_m * permille) / 10 / 2)) << 18; |
| delta_m_step /= 100; |
| delta_m_step /= mod_freq_divider; |
| if (delta_m_step > 0xFFFFF) |
| delta_m_step = 0xFFFFF; |
| |
| /* Setup Spread Spectrum */ |
| writel(delta_m_step, &cmwkup->sscdeltamstepdllmpu); |
| writel((exponent << 8) | mantissa, &cmwkup->sscmodfreqdivdpllmpu); |
| cm_clkmode_dpll_mpu = readl(&cmwkup->clkmoddpllmpu); |
| /* clear all SSC flags */ |
| cm_clkmode_dpll_mpu &= ~(0xF << CM_CLKMODE_DPLL_SSC_EN_SHIFT); |
| /* enable SSC with Downspread only */ |
| cm_clkmode_dpll_mpu |= CM_CLKMODE_DPLL_SSC_EN_MASK | |
| CM_CLKMODE_DPLL_SSC_DOWNSPREAD_MASK; |
| writel(cm_clkmode_dpll_mpu, &cmwkup->clkmoddpllmpu); |
| while (!(readl(&cmwkup->clkmoddpllmpu) & 0x2000)) |
| ; |
| } |