drivers/dma/fsl_dma.c

/*
 * Copyright 2004,2007,2008 Freescale Semiconductor, Inc.
 * (C) Copyright 2002, 2003 Motorola Inc.
 * Xianghua Xiao (X.Xiao@motorola.com)
 *
 * (C) Copyright 2000
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <config.h>
#include <common.h>
#include <asm/io.h>
#include <asm/fsl_dma.h>

/* Controller can only transfer 2^26 - 1 bytes at a time */
#define FSL_DMA_MAX_SIZE	(0x3ffffff)

#if defined(CONFIG_MPC85xx)
ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR);
#elif defined(CONFIG_MPC86xx)
ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC86xx_DMA_ADDR);
#else
#error "Freescale DMA engine not supported on your processor"
#endif

static void dma_sync(void)
{
#if defined(CONFIG_MPC85xx)
	asm("sync; isync; msync");
#elif defined(CONFIG_MPC86xx)
	asm("sync; isync");
#endif
}

static uint dma_check(void) {
	volatile fsl_dma_t *dma = &dma_base->dma[0];
	uint status;

	/* While the channel is busy, spin */
	do {
		status = in_be32(&dma->sr);
	} while (status & FSL_DMA_SR_CB);

	/* clear MR[CS] channel start bit */
	out_be32(&dma->mr, in_be32(&dma->mr) & ~FSL_DMA_MR_CS);
	dma_sync();

	if (status != 0)
		printf ("DMA Error: status = %x\n", status);

	return status;
}

void dma_init(void) {
	volatile fsl_dma_t *dma = &dma_base->dma[0];

	out_be32(&dma->satr, FSL_DMA_SATR_SREAD_NO_SNOOP);
	out_be32(&dma->datr, FSL_DMA_DATR_DWRITE_NO_SNOOP);
	out_be32(&dma->sr, 0xffffffff); /* clear any errors */
	dma_sync();
}

int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t count) {
	volatile fsl_dma_t *dma = &dma_base->dma[0];
	uint xfer_size;

	while (count) {
		xfer_size = MIN(FSL_DMA_MAX_SIZE, count);

		out_be32(&dma->dar, (uint) dest);
		out_be32(&dma->sar, (uint) src);
		out_be32(&dma->bcr, xfer_size);

		/* Disable bandwidth control, use direct transfer mode */
		out_be32(&dma->mr, FSL_DMA_MR_BWC_DIS | FSL_DMA_MR_CTM_DIRECT);
		dma_sync();

		/* Start the transfer */
		out_be32(&dma->mr, FSL_DMA_MR_BWC_DIS |
				FSL_DMA_MR_CTM_DIRECT |
				FSL_DMA_MR_CS);

		count -= xfer_size;
		src += xfer_size;
		dest += xfer_size;

		dma_sync();

		if (dma_check())
			return -1;
	}

	return 0;
}