| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved. |
| * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> |
| * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, |
| * <armlinux@phytec.de> |
| */ |
| |
| #include <linux/errno.h> |
| #include <asm/io.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/iomux.h> |
| #include <asm/arch/imx-regs.h> |
| |
| #if defined(CONFIG_MX23) |
| #define DRIVE_OFFSET 0x200 |
| #define PULL_OFFSET 0x400 |
| #elif defined(CONFIG_MX28) |
| #define DRIVE_OFFSET 0x300 |
| #define PULL_OFFSET 0x600 |
| #else |
| #error "Please select CONFIG_MX23 or CONFIG_MX28" |
| #endif |
| |
| /* |
| * configures a single pad in the iomuxer |
| */ |
| int mxs_iomux_setup_pad(iomux_cfg_t pad) |
| { |
| u32 reg, ofs, bp, bm; |
| void *iomux_base = (void *)MXS_PINCTRL_BASE; |
| struct mxs_register_32 *mxs_reg; |
| |
| /* muxsel */ |
| ofs = 0x100; |
| ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10; |
| bp = PAD_PIN(pad) % 16 * 2; |
| bm = 0x3 << bp; |
| reg = readl(iomux_base + ofs); |
| reg &= ~bm; |
| reg |= PAD_MUXSEL(pad) << bp; |
| writel(reg, iomux_base + ofs); |
| |
| /* drive */ |
| ofs = DRIVE_OFFSET; |
| ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10; |
| /* mA */ |
| if (PAD_MA_VALID(pad)) { |
| bp = PAD_PIN(pad) % 8 * 4; |
| bm = 0x3 << bp; |
| reg = readl(iomux_base + ofs); |
| reg &= ~bm; |
| reg |= PAD_MA(pad) << bp; |
| writel(reg, iomux_base + ofs); |
| } |
| /* vol */ |
| if (PAD_VOL_VALID(pad)) { |
| bp = PAD_PIN(pad) % 8 * 4 + 2; |
| mxs_reg = (struct mxs_register_32 *)(iomux_base + ofs); |
| if (PAD_VOL(pad)) |
| writel(1 << bp, &mxs_reg->reg_set); |
| else |
| writel(1 << bp, &mxs_reg->reg_clr); |
| } |
| |
| /* pull */ |
| if (PAD_PULL_VALID(pad)) { |
| ofs = PULL_OFFSET; |
| ofs += PAD_BANK(pad) * 0x10; |
| bp = PAD_PIN(pad); |
| mxs_reg = (struct mxs_register_32 *)(iomux_base + ofs); |
| if (PAD_PULL(pad)) |
| writel(1 << bp, &mxs_reg->reg_set); |
| else |
| writel(1 << bp, &mxs_reg->reg_clr); |
| } |
| |
| return 0; |
| } |
| |
| int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count) |
| { |
| const iomux_cfg_t *p = pad_list; |
| int i; |
| int ret; |
| |
| for (i = 0; i < count; i++) { |
| ret = mxs_iomux_setup_pad(*p); |
| if (ret) |
| return ret; |
| p++; |
| } |
| |
| return 0; |
| } |