| // SPDX-License-Identifier: GPL-2.0+ |
| |
| /* |
| * Copyright (C) 2020 Cortina-Access |
| * Author: Jway Lin <jway.lin@cortina-access.com> |
| * |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <led.h> |
| #include <log.h> |
| #include <asm/io.h> |
| #include <dm/lists.h> |
| #include <linux/bitops.h> |
| |
| #define LED_MAX_HW_BLINK 127 |
| #define LED_MAX_COUNT 16 |
| |
| /* LED_CONTROL fields */ |
| #define LED_BLINK_RATE1_SHIFT 0 |
| #define LED_BLINK_RATE1_MASK 0xff |
| #define LED_BLINK_RATE2_SHIFT 8 |
| #define LED_BLINK_RATE2_MASK 0xff |
| #define LED_CLK_TEST BIT(16) |
| #define LED_CLK_POLARITY BIT(17) |
| #define LED_CLK_TEST_MODE BIT(16) |
| #define LED_CLK_TEST_RX_TEST BIT(30) |
| #define LED_CLK_TEST_TX_TEST BIT(31) |
| |
| /* LED_CONFIG fields */ |
| #define LED_EVENT_ON_SHIFT 0 |
| #define LED_EVENT_ON_MASK 0x7 |
| #define LED_EVENT_BLINK_SHIFT 3 |
| #define LED_EVENT_BLINK_MASK 0x7 |
| #define LED_EVENT_OFF_SHIFT 6 |
| #define LED_EVENT_OFF_MASK 0x7 |
| #define LED_OFF_ON_SHIFT 9 |
| #define LED_OFF_ON_MASK 0x3 |
| #define LED_PORT_SHIFT 11 |
| #define LED_PORT_MASK 0x7 |
| #define LED_OFF_VAL BIT(14) |
| #define LED_SW_EVENT BIT(15) |
| #define LED_BLINK_SEL BIT(16) |
| |
| /* LED_CONFIG structures */ |
| struct cortina_led_cfg { |
| void __iomem *regs; |
| u32 pin; /* LED pin nubmer */ |
| bool active_low; /*Active-High or Active-Low*/ |
| u32 off_event; /* set led off event (RX,TX,SW)*/ |
| u32 blink_event; /* set led blink event (RX,TX,SW)*/ |
| u32 on_event; /* set led on event (RX,TX,SW)*/ |
| u32 port; /* corresponding ethernet port */ |
| int blink_sel; /* select blink-rate1 or blink-rate2 */ |
| }; |
| |
| /* LED_control structures */ |
| struct cortina_led_plat { |
| void __iomem *ctrl_regs; |
| u16 rate1; /* blink rate setting 0 */ |
| u16 rate2; /* blink rate setting 1 */ |
| }; |
| |
| enum ca_led_state_t { |
| CA_EVENT_MODE = 0, |
| CA_LED_ON = 1, |
| CA_LED_OFF, |
| }; |
| |
| static void cortina_led_write(void __iomem *reg, unsigned long data) |
| { |
| writel(data, reg); |
| } |
| |
| static unsigned long cortina_led_read(void __iomem *reg) |
| { |
| return readl(reg); |
| } |
| |
| static enum led_state_t cortina_led_get_state(struct udevice *dev) |
| { |
| struct cortina_led_cfg *priv = dev_get_priv(dev); |
| enum led_state_t state = LEDST_OFF; |
| u32 val; |
| |
| val = readl(priv->regs); |
| |
| if (val & LED_SW_EVENT) |
| state = LEDST_ON; |
| |
| return state; |
| } |
| |
| static int cortina_led_set_state(struct udevice *dev, enum led_state_t state) |
| { |
| u32 val; |
| struct cortina_led_cfg *priv = dev_get_priv(dev); |
| |
| val = readl(priv->regs); |
| val &= ~(LED_OFF_ON_MASK << LED_OFF_ON_SHIFT); |
| |
| switch (state) { |
| case LEDST_OFF: |
| val &= ~LED_SW_EVENT; |
| val |= CA_LED_OFF << LED_OFF_ON_SHIFT; |
| cortina_led_write(priv->regs, val); |
| break; |
| case LEDST_ON: |
| val |= LED_SW_EVENT; |
| val |= CA_LED_ON << LED_OFF_ON_SHIFT; |
| cortina_led_write(priv->regs, val); |
| break; |
| case LEDST_TOGGLE: |
| if (cortina_led_get_state(dev) == LEDST_OFF) |
| return cortina_led_set_state(dev, LEDST_ON); |
| else |
| return cortina_led_set_state(dev, LEDST_OFF); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const struct led_ops cortina_led_ops = { |
| .get_state = cortina_led_get_state, |
| .set_state = cortina_led_set_state, |
| }; |
| |
| static int ca_led_of_to_plat(struct udevice *dev) |
| { |
| struct led_uc_plat *uc_plat = dev_get_uclass_plat(dev); |
| |
| /* Top-level LED node */ |
| if (!uc_plat->label) { |
| struct cortina_led_plat *plt = dev_get_plat(dev); |
| |
| plt->rate1 = |
| dev_read_u32_default(dev, "Cortina,blink-rate1", 256); |
| plt->rate2 = |
| dev_read_u32_default(dev, "Cortina,blink-rate2", 512); |
| plt->ctrl_regs = dev_remap_addr(dev); |
| } else { |
| struct cortina_led_cfg *priv = dev_get_priv(dev); |
| |
| priv->regs = dev_remap_addr(dev_get_parent(dev)); |
| priv->pin = dev_read_u32_default(dev, "pin", LED_MAX_COUNT); |
| priv->blink_sel = dev_read_u32_default(dev, "blink-sel", 0); |
| priv->off_event = dev_read_u32_default(dev, "off-event", 0); |
| priv->blink_event = dev_read_u32_default(dev, "blink-event", 0); |
| priv->on_event = dev_read_u32_default(dev, "on-event", 0); |
| priv->port = dev_read_u32_default(dev, "port", 0); |
| |
| if (dev_read_bool(dev, "active-low")) |
| priv->active_low = true; |
| else |
| priv->active_low = false; |
| } |
| |
| return 0; |
| } |
| |
| static int cortina_led_probe(struct udevice *dev) |
| { |
| struct led_uc_plat *uc_plat = dev_get_uclass_plat(dev); |
| |
| /* Top-level LED node */ |
| if (!uc_plat->label) { |
| struct cortina_led_plat *plat = dev_get_plat(dev); |
| u32 reg_value, val; |
| u16 rate1, rate2; |
| |
| if (!plat->ctrl_regs) |
| return -EINVAL; |
| |
| reg_value = 0; |
| reg_value |= LED_CLK_POLARITY; |
| |
| rate1 = plat->rate1; |
| rate2 = plat->rate2; |
| |
| val = rate1 / 16 - 1; |
| rate1 = val > LED_MAX_HW_BLINK ? |
| LED_MAX_HW_BLINK : val; |
| reg_value |= (rate1 & LED_BLINK_RATE1_MASK) << |
| LED_BLINK_RATE1_SHIFT; |
| |
| val = rate2 / 16 - 1; |
| rate2 = val > LED_MAX_HW_BLINK ? |
| LED_MAX_HW_BLINK : val; |
| reg_value |= (rate2 & LED_BLINK_RATE2_MASK) << |
| LED_BLINK_RATE2_SHIFT; |
| |
| cortina_led_write(plat->ctrl_regs, reg_value); |
| |
| } else { |
| struct cortina_led_cfg *priv = dev_get_priv(dev); |
| void __iomem *regs; |
| u32 val, port, off_event, blink_event, on_event; |
| |
| regs = priv->regs; |
| if (!regs) |
| return -EINVAL; |
| |
| if (priv->pin >= LED_MAX_COUNT) |
| return -EINVAL; |
| |
| priv->regs = regs + 4 + priv->pin * 4; |
| |
| val = cortina_led_read(priv->regs); |
| |
| if (priv->active_low) |
| val |= LED_OFF_VAL; |
| else |
| val &= ~LED_OFF_VAL; |
| |
| if (priv->blink_sel == 0) |
| val &= ~LED_BLINK_SEL; |
| else if (priv->blink_sel == 1) |
| val |= LED_BLINK_SEL; |
| |
| off_event = priv->off_event; |
| val &= ~(LED_EVENT_OFF_MASK << LED_EVENT_OFF_SHIFT); |
| if (off_event != 0) |
| val |= BIT(off_event) << LED_EVENT_OFF_SHIFT; |
| |
| blink_event = priv->blink_event; |
| val &= ~(LED_EVENT_BLINK_MASK << LED_EVENT_BLINK_SHIFT); |
| if (blink_event != 0) |
| val |= BIT(blink_event) << LED_EVENT_BLINK_SHIFT; |
| |
| on_event = priv->on_event; |
| val &= ~(LED_EVENT_ON_MASK << LED_EVENT_ON_SHIFT); |
| if (on_event != 0) |
| val |= BIT(on_event) << LED_EVENT_ON_SHIFT; |
| |
| port = priv->port; |
| val &= ~(LED_PORT_MASK << LED_PORT_SHIFT); |
| val |= port << LED_PORT_SHIFT; |
| |
| /* force off */ |
| val &= ~(LED_OFF_ON_MASK << LED_OFF_ON_SHIFT); |
| val |= CA_LED_OFF << LED_OFF_ON_SHIFT; |
| |
| cortina_led_write(priv->regs, val); |
| } |
| |
| return 0; |
| } |
| |
| static int cortina_led_bind(struct udevice *parent) |
| { |
| ofnode node; |
| |
| dev_for_each_subnode(node, parent) { |
| struct led_uc_plat *uc_plat; |
| struct udevice *dev; |
| const char *label; |
| int ret; |
| |
| label = ofnode_read_string(node, "label"); |
| if (!label) { |
| debug("%s: node %s has no label\n", __func__, |
| ofnode_get_name(node)); |
| return -EINVAL; |
| } |
| |
| ret = device_bind_driver_to_node(parent, "ca-leds", |
| ofnode_get_name(node), |
| node, &dev); |
| if (ret) |
| return ret; |
| uc_plat = dev_get_uclass_plat(dev); |
| uc_plat->label = label; |
| } |
| |
| return 0; |
| } |
| |
| static const struct udevice_id ca_led_ids[] = { |
| { .compatible = "cortina,ca-leds" }, |
| { /* sentinel */ } |
| }; |
| |
| U_BOOT_DRIVER(cortina_led) = { |
| .name = "ca-leds", |
| .id = UCLASS_LED, |
| .of_match = ca_led_ids, |
| .of_to_plat = ca_led_of_to_plat, |
| .bind = cortina_led_bind, |
| .probe = cortina_led_probe, |
| .plat_auto = sizeof(struct cortina_led_plat), |
| .priv_auto = sizeof(struct cortina_led_cfg), |
| .ops = &cortina_led_ops, |
| }; |