| CONFIG_ARM=y |
| CONFIG_ARCH_ROCKCHIP=y |
| CONFIG_SYS_MALLOC_F_LEN=0x2000 |
| CONFIG_ROCKCHIP_RK3288=y |
| CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y |
| CONFIG_TARGET_EVB_RK3288=y |
| CONFIG_SPL_STACK_R_ADDR=0x80000 |
| CONFIG_DEFAULT_DEVICE_TREE="rk3288-evb" |
| CONFIG_DEBUG_UART=y |
| CONFIG_ENV_IS_IN_MMC=y |
| CONFIG_SILENT_CONSOLE=y |
| # CONFIG_DISPLAY_CPUINFO is not set |
| CONFIG_SPL_STACK_R=y |
| CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 |
| # CONFIG_CMD_IMLS is not set |
| CONFIG_CMD_GPT=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_SF=y |
| CONFIG_CMD_SPI=y |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_GPIO=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_CMD_CACHE=y |
| CONFIG_CMD_TIME=y |
| CONFIG_CMD_PMIC=y |
| CONFIG_CMD_REGULATOR=y |
| # CONFIG_SPL_DOS_PARTITION is not set |
| # CONFIG_SPL_ISO_PARTITION is not set |
| # CONFIG_SPL_EFI_PARTITION is not set |
| CONFIG_SPL_PARTITION_UUIDS=y |
| CONFIG_SPL_OF_CONTROL=y |
| CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" |
| CONFIG_REGMAP=y |
| CONFIG_SPL_REGMAP=y |
| CONFIG_SYSCON=y |
| CONFIG_SPL_SYSCON=y |
| CONFIG_CLK=y |
| CONFIG_SPL_CLK=y |
| CONFIG_ROCKCHIP_GPIO=y |
| CONFIG_SYS_I2C_ROCKCHIP=y |
| CONFIG_LED=y |
| CONFIG_LED_GPIO=y |
| CONFIG_MMC_DW=y |
| CONFIG_MMC_DW_ROCKCHIP=y |
| CONFIG_DM_ETH=y |
| CONFIG_ETH_DESIGNWARE=y |
| CONFIG_GMAC_ROCKCHIP=y |
| CONFIG_PINCTRL=y |
| CONFIG_SPL_PINCTRL=y |
| # CONFIG_SPL_PINCTRL_FULL is not set |
| CONFIG_PINCTRL_ROCKCHIP_RK3288=y |
| CONFIG_DM_PMIC=y |
| CONFIG_PMIC_ACT8846=y |
| CONFIG_REGULATOR_ACT8846=y |
| CONFIG_DM_REGULATOR_FIXED=y |
| CONFIG_PWM_ROCKCHIP=y |
| CONFIG_RAM=y |
| CONFIG_SPL_RAM=y |
| CONFIG_DEBUG_UART_BASE=0xff690000 |
| CONFIG_DEBUG_UART_CLOCK=24000000 |
| CONFIG_DEBUG_UART_SHIFT=2 |
| CONFIG_SYS_NS16550=y |
| CONFIG_SYSRESET=y |
| CONFIG_DM_VIDEO=y |
| CONFIG_DISPLAY=y |
| CONFIG_VIDEO_ROCKCHIP=y |
| CONFIG_VIDEO_ROCKCHIP_MAX_YRES=1200 |
| CONFIG_DISPLAY_ROCKCHIP_MIPI=y |
| CONFIG_USE_TINY_PRINTF=y |
| CONFIG_CMD_DHRYSTONE=y |
| CONFIG_ERRNO_STR=y |