| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2003 |
| * Josef Baumgartner <josef.baumgartner@telex.de> |
| * |
| * MCF5282 additionals |
| * (C) Copyright 2005 |
| * BuS Elektronik GmbH & Co. KG <esw@bus-elektronik.de> |
| * |
| * MCF5275 additions |
| * Copyright (C) 2008 Arthur Shipkowski (art@videon-central.com) |
| * |
| * Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved. |
| */ |
| |
| #include <init.h> |
| #include <net.h> |
| #include <vsprintf.h> |
| #include <command.h> |
| #include <asm/global_data.h> |
| #include <asm/immap.h> |
| #include <asm/io.h> |
| #include <netdev.h> |
| #include <linux/delay.h> |
| #include "cpu.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #ifdef CONFIG_M5208 |
| int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) |
| { |
| rcm_t *rcm = (rcm_t *)(MMAP_RCM); |
| |
| udelay(1000); |
| |
| out_8(&rcm->rcr, RCM_RCR_SOFTRST); |
| |
| /* we don't return! */ |
| return 0; |
| }; |
| |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| int print_cpuinfo(void) |
| { |
| char buf1[32], buf2[32]; |
| |
| printf("CPU: Freescale Coldfire MCF5208\n" |
| " CPU CLK %s MHz BUS CLK %s MHz\n", |
| strmhz(buf1, gd->cpu_clk), |
| strmhz(buf2, gd->bus_clk)); |
| return 0; |
| }; |
| #endif /* CONFIG_DISPLAY_CPUINFO */ |
| #endif /* #ifdef CONFIG_M5208 */ |
| |
| #ifdef CONFIG_M5271 |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| /* |
| * Both MCF5270 and MCF5271 are members of the MPC5271 family. Try to |
| * determine which one we are running on, based on the Chip Identification |
| * Register (CIR). |
| */ |
| int print_cpuinfo(void) |
| { |
| char buf[32]; |
| unsigned short cir; /* Chip Identification Register */ |
| unsigned short pin; /* Part identification number */ |
| unsigned char prn; /* Part revision number */ |
| char *cpu_model; |
| |
| cir = mbar_readShort(MCF_CCM_CIR); |
| pin = cir >> MCF_CCM_CIR_PIN_LEN; |
| prn = cir & MCF_CCM_CIR_PRN_MASK; |
| |
| switch (pin) { |
| case MCF_CCM_CIR_PIN_MCF5270: |
| cpu_model = "5270"; |
| break; |
| case MCF_CCM_CIR_PIN_MCF5271: |
| cpu_model = "5271"; |
| break; |
| default: |
| cpu_model = NULL; |
| break; |
| } |
| |
| if (cpu_model) |
| printf("CPU: Freescale ColdFire MCF%s rev. %hu, at %s MHz\n", |
| cpu_model, prn, strmhz(buf, CFG_SYS_CLK)); |
| else |
| printf("CPU: Unknown - Freescale ColdFire MCF5271 family" |
| " (PIN: 0x%x) rev. %hu, at %s MHz\n", |
| pin, prn, strmhz(buf, CFG_SYS_CLK)); |
| |
| return 0; |
| } |
| #endif /* CONFIG_DISPLAY_CPUINFO */ |
| |
| int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) |
| { |
| /* Call the board specific reset actions first. */ |
| if(board_reset) { |
| board_reset(); |
| } |
| |
| mbar_writeByte(MCF_RCM_RCR, |
| MCF_RCM_RCR_SOFTRST | MCF_RCM_RCR_FRCRSTOUT); |
| return 0; |
| }; |
| |
| #if defined(CONFIG_WATCHDOG) |
| void watchdog_reset(void) |
| { |
| mbar_writeShort(MCF_WTM_WSR, 0x5555); |
| mbar_writeShort(MCF_WTM_WSR, 0xAAAA); |
| } |
| |
| int watchdog_disable(void) |
| { |
| mbar_writeShort(MCF_WTM_WCR, 0); |
| return (0); |
| } |
| |
| int watchdog_init(void) |
| { |
| mbar_writeShort(MCF_WTM_WCR, MCF_WTM_WCR_EN); |
| return (0); |
| } |
| #endif /* #ifdef CONFIG_WATCHDOG */ |
| |
| #endif |
| |
| #ifdef CONFIG_M5272 |
| int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) |
| { |
| wdog_t *wdp = (wdog_t *) (MMAP_WDOG); |
| |
| out_be16(&wdp->wdog_wrrr, 0); |
| udelay(1000); |
| |
| /* enable watchdog, set timeout to 0 and wait */ |
| out_be16(&wdp->wdog_wrrr, 1); |
| while (1) ; |
| |
| /* we don't return! */ |
| return 0; |
| }; |
| |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| int print_cpuinfo(void) |
| { |
| sysctrl_t *sysctrl = (sysctrl_t *) (MMAP_CFG); |
| uchar msk; |
| char *suf; |
| |
| puts("CPU: "); |
| msk = (in_be32(&sysctrl->sc_dir) > 28) & 0xf; |
| switch (msk) { |
| case 0x2: |
| suf = "1K75N"; |
| break; |
| case 0x4: |
| suf = "3K75N"; |
| break; |
| default: |
| suf = NULL; |
| printf("Freescale MCF5272 (Mask:%01x)\n", msk); |
| break; |
| } |
| |
| if (suf) |
| printf("Freescale MCF5272 %s\n", suf); |
| return 0; |
| }; |
| #endif /* CONFIG_DISPLAY_CPUINFO */ |
| |
| #if defined(CONFIG_WATCHDOG) |
| /* Called by macro WATCHDOG_RESET */ |
| void watchdog_reset(void) |
| { |
| wdog_t *wdt = (wdog_t *)(MMAP_WDOG); |
| |
| out_be16(&wdt->wdog_wcr, 0); |
| } |
| |
| int watchdog_disable(void) |
| { |
| wdog_t *wdt = (wdog_t *)(MMAP_WDOG); |
| |
| /* reset watchdog counter */ |
| out_be16(&wdt->wdog_wcr, 0); |
| /* disable watchdog interrupt */ |
| out_be16(&wdt->wdog_wirr, 0); |
| /* disable watchdog timer */ |
| out_be16(&wdt->wdog_wrrr, 0); |
| |
| puts("WATCHDOG:disabled\n"); |
| return (0); |
| } |
| |
| int watchdog_init(void) |
| { |
| wdog_t *wdt = (wdog_t *)(MMAP_WDOG); |
| |
| /* disable watchdog interrupt */ |
| out_be16(&wdt->wdog_wirr, 0); |
| |
| /* set timeout and enable watchdog */ |
| out_be16(&wdt->wdog_wrrr, |
| (CONFIG_WATCHDOG_TIMEOUT_MSECS * CONFIG_SYS_HZ) / (32768 * 1000) - 1); |
| |
| /* reset watchdog counter */ |
| out_be16(&wdt->wdog_wcr, 0); |
| |
| puts("WATCHDOG:enabled\n"); |
| return (0); |
| } |
| #endif /* #ifdef CONFIG_WATCHDOG */ |
| |
| #endif /* #ifdef CONFIG_M5272 */ |
| |
| #ifdef CONFIG_M5275 |
| int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) |
| { |
| rcm_t *rcm = (rcm_t *)(MMAP_RCM); |
| |
| udelay(1000); |
| |
| out_8(&rcm->rcr, RCM_RCR_SOFTRST); |
| |
| /* we don't return! */ |
| return 0; |
| }; |
| |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| int print_cpuinfo(void) |
| { |
| char buf[32]; |
| |
| printf("CPU: Freescale Coldfire MCF5275 at %s MHz\n", |
| strmhz(buf, CFG_SYS_CLK)); |
| return 0; |
| }; |
| #endif /* CONFIG_DISPLAY_CPUINFO */ |
| |
| #if defined(CONFIG_WATCHDOG) |
| /* Called by macro WATCHDOG_RESET */ |
| void watchdog_reset(void) |
| { |
| wdog_t *wdt = (wdog_t *)(MMAP_WDOG); |
| |
| out_be16(&wdt->wsr, 0x5555); |
| out_be16(&wdt->wsr, 0xaaaa); |
| } |
| |
| int watchdog_disable(void) |
| { |
| wdog_t *wdt = (wdog_t *)(MMAP_WDOG); |
| |
| /* reset watchdog counter */ |
| out_be16(&wdt->wsr, 0x5555); |
| out_be16(&wdt->wsr, 0xaaaa); |
| |
| /* disable watchdog timer */ |
| out_be16(&wdt->wcr, 0); |
| |
| puts("WATCHDOG:disabled\n"); |
| return (0); |
| } |
| |
| int watchdog_init(void) |
| { |
| wdog_t *wdt = (wdog_t *)(MMAP_WDOG); |
| |
| /* disable watchdog */ |
| out_be16(&wdt->wcr, 0); |
| |
| /* set timeout and enable watchdog */ |
| out_be16(&wdt->wmr, |
| (CONFIG_WATCHDOG_TIMEOUT_MSECS * CONFIG_SYS_HZ) / (32768 * 1000) - 1); |
| |
| /* reset watchdog counter */ |
| out_be16(&wdt->wsr, 0x5555); |
| out_be16(&wdt->wsr, 0xaaaa); |
| |
| puts("WATCHDOG:enabled\n"); |
| return (0); |
| } |
| #endif /* #ifdef CONFIG_WATCHDOG */ |
| |
| #endif /* #ifdef CONFIG_M5275 */ |
| |
| #ifdef CONFIG_M5282 |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| int print_cpuinfo(void) |
| { |
| unsigned char resetsource = MCFRESET_RSR; |
| |
| printf("CPU: Freescale Coldfire MCF5282 (PIN: %2.2x REV: %2.2x)\n", |
| MCFCCM_CIR >> 8, MCFCCM_CIR & MCFCCM_CIR_PRN_MASK); |
| printf("Reset:%s%s%s%s%s%s%s\n", |
| (resetsource & MCFRESET_RSR_LOL) ? " Loss of Lock" : "", |
| (resetsource & MCFRESET_RSR_LOC) ? " Loss of Clock" : "", |
| (resetsource & MCFRESET_RSR_EXT) ? " External" : "", |
| (resetsource & MCFRESET_RSR_POR) ? " Power On" : "", |
| (resetsource & MCFRESET_RSR_WDR) ? " Watchdog" : "", |
| (resetsource & MCFRESET_RSR_SOFT) ? " Software" : "", |
| (resetsource & MCFRESET_RSR_LVD) ? " Low Voltage" : ""); |
| return 0; |
| } |
| #endif /* CONFIG_DISPLAY_CPUINFO */ |
| |
| int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) |
| { |
| MCFRESET_RCR = MCFRESET_RCR_SOFTRST; |
| return 0; |
| }; |
| #endif |
| |
| #ifdef CONFIG_M5249 |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| int print_cpuinfo(void) |
| { |
| char buf[32]; |
| |
| printf("CPU: Freescale Coldfire MCF5249 at %s MHz\n", |
| strmhz(buf, CFG_SYS_CLK)); |
| return 0; |
| } |
| #endif /* CONFIG_DISPLAY_CPUINFO */ |
| |
| int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) |
| { |
| /* enable watchdog, set timeout to 0 and wait */ |
| mbar_writeByte(MCFSIM_SYPCR, 0xc0); |
| while (1) ; |
| |
| /* we don't return! */ |
| return 0; |
| }; |
| #endif |
| |
| #ifdef CONFIG_M5253 |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| int print_cpuinfo(void) |
| { |
| char buf[32]; |
| |
| unsigned char resetsource = mbar_readLong(SIM_RSR); |
| printf("CPU: Freescale Coldfire MCF5253 at %s MHz\n", |
| strmhz(buf, CFG_SYS_CLK)); |
| |
| if ((resetsource & SIM_RSR_HRST) || (resetsource & SIM_RSR_SWTR)) { |
| printf("Reset:%s%s\n", |
| (resetsource & SIM_RSR_HRST) ? " Hardware/ System Reset" |
| : "", |
| (resetsource & SIM_RSR_SWTR) ? " Software Watchdog" : |
| ""); |
| } |
| return 0; |
| } |
| #endif /* CONFIG_DISPLAY_CPUINFO */ |
| |
| int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) |
| { |
| /* enable watchdog, set timeout to 0 and wait */ |
| mbar_writeByte(SIM_SYPCR, 0xc0); |
| while (1) ; |
| |
| /* we don't return! */ |
| return 0; |
| }; |
| #endif |
| |
| #if defined(CONFIG_MCFFEC) |
| /* Default initializations for MCFFEC controllers. To override, |
| * create a board-specific function called: |
| * int board_eth_init(struct bd_info *bis) |
| */ |
| |
| int cpu_eth_init(struct bd_info *bis) |
| { |
| return mcffec_initialize(bis); |
| } |
| #endif |