| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * (C) Copyright 2018 Rockchip Electronics Co., Ltd. |
| */ |
| |
| #include <common.h> |
| #include <debug_uart.h> |
| #include <dm.h> |
| #include <init.h> |
| #include <log.h> |
| #include <ram.h> |
| #include <syscon.h> |
| #include <asm/io.h> |
| #include <asm/arch-rockchip/clock.h> |
| #include <asm/arch-rockchip/cru_px30.h> |
| #include <asm/arch-rockchip/grf_px30.h> |
| #include <asm/arch-rockchip/hardware.h> |
| #include <asm/arch-rockchip/sdram.h> |
| #include <asm/arch-rockchip/sdram_px30.h> |
| #include <linux/delay.h> |
| |
| struct dram_info { |
| #ifdef CONFIG_TPL_BUILD |
| struct ddr_pctl_regs *pctl; |
| struct ddr_phy_regs *phy; |
| struct px30_cru *cru; |
| struct msch_regs *msch; |
| struct px30_ddr_grf_regs *ddr_grf; |
| struct px30_grf *grf; |
| #endif |
| struct ram_info info; |
| struct px30_pmugrf *pmugrf; |
| }; |
| |
| #ifdef CONFIG_TPL_BUILD |
| |
| u8 ddr_cfg_2_rbc[] = { |
| /* |
| * [6:4] max row: 13+n |
| * [3] bank(0:4bank,1:8bank) |
| * [2:0] col(10+n) |
| */ |
| ((5 << 4) | (1 << 3) | 0), /* 0 */ |
| ((5 << 4) | (1 << 3) | 1), /* 1 */ |
| ((4 << 4) | (1 << 3) | 2), /* 2 */ |
| ((3 << 4) | (1 << 3) | 3), /* 3 */ |
| ((2 << 4) | (1 << 3) | 4), /* 4 */ |
| ((5 << 4) | (0 << 3) | 2), /* 5 */ |
| ((4 << 4) | (1 << 3) | 2), /* 6 */ |
| /*((0<<3)|3),*/ /* 12 for ddr4 */ |
| /*((1<<3)|1),*/ /* 13 B,C exchange for rkvdec */ |
| }; |
| |
| /* |
| * for ddr4 if ddrconfig=7, upctl should set 7 and noc should |
| * set to 1 for more efficient. |
| * noc ddrconf, upctl addrmap |
| * 1 7 |
| * 2 8 |
| * 3 9 |
| * 12 10 |
| * 5 11 |
| */ |
| u8 d4_rbc_2_d3_rbc[] = { |
| 1, /* 7 */ |
| 2, /* 8 */ |
| 3, /* 9 */ |
| 12, /* 10 */ |
| 5, /* 11 */ |
| }; |
| |
| /* |
| * row higher than cs should be disabled by set to 0xf |
| * rank addrmap calculate by real cap. |
| */ |
| u32 addrmap[][8] = { |
| /* map0 map1, map2, map3, map4, map5 |
| * map6, map7, map8 |
| * ------------------------------------------------------- |
| * bk2-0 col 5-2 col 9-6 col 11-10 row 11-0 |
| * row 15-12 row 17-16 bg1,0 |
| * ------------------------------------------------------- |
| * 4,3,2 5-2 9-6 6 |
| * 3,2 |
| */ |
| {0x00060606, 0x00000000, 0x1f1f0000, 0x00001f1f, 0x05050505, |
| 0x05050505, 0x00000505, 0x3f3f}, /* 0 */ |
| {0x00070707, 0x00000000, 0x1f000000, 0x00001f1f, 0x06060606, |
| 0x06060606, 0x06060606, 0x3f3f}, /* 1 */ |
| {0x00080808, 0x00000000, 0x00000000, 0x00001f1f, 0x07070707, |
| 0x07070707, 0x00000f07, 0x3f3f}, /* 2 */ |
| {0x00090909, 0x00000000, 0x00000000, 0x00001f00, 0x08080808, |
| 0x08080808, 0x00000f0f, 0x3f3f}, /* 3 */ |
| {0x000a0a0a, 0x00000000, 0x00000000, 0x00000000, 0x09090909, |
| 0x0f090909, 0x00000f0f, 0x3f3f}, /* 4 */ |
| {0x00080808, 0x00000000, 0x00000000, 0x00001f1f, 0x06060606, |
| 0x06060606, 0x00000606, 0x3f3f}, /* 5 */ |
| {0x00080808, 0x00000000, 0x00000000, 0x00001f1f, 0x07070707, |
| 0x07070707, 0x00000f0f, 0x3f3f}, /* 6 */ |
| {0x003f0808, 0x00000006, 0x1f1f0000, 0x00001f1f, 0x06060606, |
| 0x06060606, 0x00000606, 0x0600}, /* 7 */ |
| {0x003f0909, 0x00000007, 0x1f000000, 0x00001f1f, 0x07070707, |
| 0x07070707, 0x00000f07, 0x0700}, /* 8 */ |
| {0x003f0a0a, 0x01010100, 0x01010101, 0x00001f1f, 0x08080808, |
| 0x08080808, 0x00000f0f, 0x0801}, /* 9 */ |
| {0x003f0909, 0x01010100, 0x01010101, 0x00001f1f, 0x07070707, |
| 0x07070707, 0x00000f07, 0x3f01}, /* 10 */ |
| {0x003f0808, 0x00000007, 0x1f000000, 0x00001f1f, 0x06060606, |
| 0x06060606, 0x00000606, 0x3f00}, /* 11 */ |
| /* when ddr4 12 map to 10, when ddr3 12 unused */ |
| {0x003f0909, 0x01010100, 0x01010101, 0x00001f1f, 0x07070707, |
| 0x07070707, 0x00000f07, 0x3f01}, /* 10 */ |
| {0x00070706, 0x00000000, 0x1f010000, 0x00001f1f, 0x06060606, |
| 0x06060606, 0x00000606, 0x3f3f}, /* 13 */ |
| }; |
| |
| #define PMUGRF_BASE_ADDR 0xFF010000 |
| #define CRU_BASE_ADDR 0xFF2B0000 |
| #define GRF_BASE_ADDR 0xFF140000 |
| #define DDRC_BASE_ADDR 0xFF600000 |
| #define DDR_PHY_BASE_ADDR 0xFF2A0000 |
| #define SERVER_MSCH0_BASE_ADDR 0xFF530000 |
| #define DDR_GRF_BASE_ADDR 0xff630000 |
| |
| struct dram_info dram_info; |
| |
| struct px30_sdram_params sdram_configs[] = { |
| #if defined(CONFIG_RAM_PX30_DDR4) |
| #include "sdram-px30-ddr4-detect-333.inc" |
| #elif defined(CONFIG_RAM_PX30_LPDDR2) |
| #include "sdram-px30-lpddr2-detect-333.inc" |
| #elif defined(CONFIG_RAM_PX30_LPDDR3) |
| #include "sdram-px30-lpddr3-detect-333.inc" |
| #else |
| #include "sdram-px30-ddr3-detect-333.inc" |
| #endif |
| }; |
| |
| struct ddr_phy_skew skew = { |
| #include "sdram-px30-ddr_skew.inc" |
| }; |
| |
| static void rkclk_ddr_reset(struct dram_info *dram, |
| u32 ctl_srstn, u32 ctl_psrstn, |
| u32 phy_srstn, u32 phy_psrstn) |
| { |
| writel(upctl2_srstn_req(ctl_srstn) | upctl2_psrstn_req(ctl_psrstn) | |
| upctl2_asrstn_req(ctl_srstn), |
| &dram->cru->softrst_con[1]); |
| writel(ddrphy_srstn_req(phy_srstn) | ddrphy_psrstn_req(phy_psrstn), |
| &dram->cru->softrst_con[2]); |
| } |
| |
| static void rkclk_set_dpll(struct dram_info *dram, unsigned int hz) |
| { |
| unsigned int refdiv, postdiv1, postdiv2, fbdiv; |
| int delay = 1000; |
| u32 mhz = hz / MHz; |
| |
| refdiv = 1; |
| if (mhz <= 300) { |
| postdiv1 = 4; |
| postdiv2 = 2; |
| } else if (mhz <= 400) { |
| postdiv1 = 6; |
| postdiv2 = 1; |
| } else if (mhz <= 600) { |
| postdiv1 = 4; |
| postdiv2 = 1; |
| } else if (mhz <= 800) { |
| postdiv1 = 3; |
| postdiv2 = 1; |
| } else if (mhz <= 1600) { |
| postdiv1 = 2; |
| postdiv2 = 1; |
| } else { |
| postdiv1 = 1; |
| postdiv2 = 1; |
| } |
| fbdiv = (mhz * refdiv * postdiv1 * postdiv2) / 24; |
| |
| writel(DPLL_MODE(CLOCK_FROM_XIN_OSC), &dram->cru->mode); |
| |
| writel(POSTDIV1(postdiv1) | FBDIV(fbdiv), &dram->cru->pll[1].con0); |
| writel(DSMPD(1) | POSTDIV2(postdiv2) | REFDIV(refdiv), |
| &dram->cru->pll[1].con1); |
| |
| while (delay > 0) { |
| udelay(1); |
| if (LOCK(readl(&dram->cru->pll[1].con1))) |
| break; |
| delay--; |
| } |
| |
| writel(DPLL_MODE(CLOCK_FROM_PLL), &dram->cru->mode); |
| } |
| |
| static void rkclk_configure_ddr(struct dram_info *dram, |
| struct px30_sdram_params *sdram_params) |
| { |
| /* for inno ddr phy need 2*freq */ |
| rkclk_set_dpll(dram, sdram_params->base.ddr_freq * MHz * 2); |
| } |
| |
| /* return ddrconfig value |
| * (-1), find ddrconfig fail |
| * other, the ddrconfig value |
| * only support cs0_row >= cs1_row |
| */ |
| static unsigned int calculate_ddrconfig(struct px30_sdram_params *sdram_params) |
| { |
| struct sdram_cap_info *cap_info = &sdram_params->ch.cap_info; |
| u32 bw, die_bw, col, bank; |
| u32 i, tmp; |
| u32 ddrconf = -1; |
| |
| bw = cap_info->bw; |
| die_bw = cap_info->dbw; |
| col = cap_info->col; |
| bank = cap_info->bk; |
| |
| if (sdram_params->base.dramtype == DDR4) { |
| if (die_bw == 0) |
| ddrconf = 7 + bw; |
| else |
| ddrconf = 12 - bw; |
| ddrconf = d4_rbc_2_d3_rbc[ddrconf - 7]; |
| } else { |
| tmp = ((bank - 2) << 3) | (col + bw - 10); |
| for (i = 0; i < 7; i++) |
| if ((ddr_cfg_2_rbc[i] & 0xf) == tmp) { |
| ddrconf = i; |
| break; |
| } |
| if (i > 6) |
| printascii("calculate ddrconfig error\n"); |
| } |
| |
| return ddrconf; |
| } |
| |
| /* |
| * calculate controller dram address map, and setting to register. |
| * argument sdram_params->ch.ddrconf must be right value before |
| * call this function. |
| */ |
| static void set_ctl_address_map(struct dram_info *dram, |
| struct px30_sdram_params *sdram_params) |
| { |
| struct sdram_cap_info *cap_info = &sdram_params->ch.cap_info; |
| void __iomem *pctl_base = dram->pctl; |
| u32 cs_pst, bg, max_row, ddrconf; |
| u32 i; |
| |
| if (sdram_params->base.dramtype == DDR4) |
| /* |
| * DDR4 8bit dram BG = 2(4bank groups), |
| * 16bit dram BG = 1 (2 bank groups) |
| */ |
| bg = (cap_info->dbw == 0) ? 2 : 1; |
| else |
| bg = 0; |
| |
| cs_pst = cap_info->bw + cap_info->col + |
| bg + cap_info->bk + cap_info->cs0_row; |
| if (cs_pst >= 32 || cap_info->rank == 1) |
| writel(0x1f, pctl_base + DDR_PCTL2_ADDRMAP0); |
| else |
| writel(cs_pst - 8, pctl_base + DDR_PCTL2_ADDRMAP0); |
| |
| ddrconf = cap_info->ddrconfig; |
| if (sdram_params->base.dramtype == DDR4) { |
| for (i = 0; i < ARRAY_SIZE(d4_rbc_2_d3_rbc); i++) { |
| if (d4_rbc_2_d3_rbc[i] == ddrconf) { |
| ddrconf = 7 + i; |
| break; |
| } |
| } |
| } |
| |
| sdram_copy_to_reg((u32 *)(pctl_base + DDR_PCTL2_ADDRMAP1), |
| &addrmap[ddrconf][0], 8 * 4); |
| max_row = cs_pst - 1 - 8 - (addrmap[ddrconf][5] & 0xf); |
| |
| if (max_row < 12) |
| printascii("set addrmap fail\n"); |
| /* need to disable row ahead of rank by set to 0xf */ |
| for (i = 17; i > max_row; i--) |
| clrsetbits_le32(pctl_base + DDR_PCTL2_ADDRMAP6 + |
| ((i - 12) * 8 / 32) * 4, |
| 0xf << ((i - 12) * 8 % 32), |
| 0xf << ((i - 12) * 8 % 32)); |
| |
| if ((sdram_params->base.dramtype == LPDDR3 || |
| sdram_params->base.dramtype == LPDDR2) && |
| cap_info->row_3_4) |
| setbits_le32(pctl_base + DDR_PCTL2_ADDRMAP6, 1 << 31); |
| if (sdram_params->base.dramtype == DDR4 && cap_info->bw != 0x2) |
| setbits_le32(pctl_base + DDR_PCTL2_PCCFG, 1 << 8); |
| } |
| |
| /* |
| * rank = 1: cs0 |
| * rank = 2: cs1 |
| */ |
| int read_mr(struct dram_info *dram, u32 rank, u32 mr_num) |
| { |
| void __iomem *ddr_grf_base = dram->ddr_grf; |
| |
| pctl_read_mr(dram->pctl, rank, mr_num); |
| |
| return (readl(ddr_grf_base + DDR_GRF_STATUS(0)) & 0xff); |
| } |
| |
| #define MIN(a, b) (((a) > (b)) ? (b) : (a)) |
| #define MAX(a, b) (((a) > (b)) ? (a) : (b)) |
| static u32 check_rd_gate(struct dram_info *dram) |
| { |
| void __iomem *phy_base = dram->phy; |
| |
| u32 max_val = 0; |
| u32 min_val = 0xff; |
| u32 gate[4]; |
| u32 i, bw; |
| |
| bw = (readl(PHY_REG(phy_base, 0x0)) >> 4) & 0xf; |
| switch (bw) { |
| case 0x1: |
| bw = 1; |
| break; |
| case 0x3: |
| bw = 2; |
| break; |
| case 0xf: |
| default: |
| bw = 4; |
| break; |
| } |
| |
| for (i = 0; i < bw; i++) { |
| gate[i] = readl(PHY_REG(phy_base, 0xfb + i)); |
| max_val = MAX(max_val, gate[i]); |
| min_val = MIN(min_val, gate[i]); |
| } |
| |
| if (max_val > 0x80 || min_val < 0x20) |
| return -1; |
| else |
| return 0; |
| } |
| |
| static int data_training(struct dram_info *dram, u32 cs, u32 dramtype) |
| { |
| void __iomem *pctl_base = dram->pctl; |
| u32 dis_auto_zq = 0; |
| u32 pwrctl; |
| u32 ret; |
| |
| /* disable auto low-power */ |
| pwrctl = readl(pctl_base + DDR_PCTL2_PWRCTL); |
| writel(0, pctl_base + DDR_PCTL2_PWRCTL); |
| |
| dis_auto_zq = pctl_dis_zqcs_aref(dram->pctl); |
| |
| ret = phy_data_training(dram->phy, cs, dramtype); |
| |
| pctl_rest_zqcs_aref(dram->pctl, dis_auto_zq); |
| |
| /* restore auto low-power */ |
| writel(pwrctl, pctl_base + DDR_PCTL2_PWRCTL); |
| |
| return ret; |
| } |
| |
| static void dram_set_bw(struct dram_info *dram, u32 bw) |
| { |
| phy_dram_set_bw(dram->phy, bw); |
| } |
| |
| static void set_ddrconfig(struct dram_info *dram, u32 ddrconfig) |
| { |
| writel(ddrconfig | (ddrconfig << 8), &dram->msch->deviceconf); |
| rk_clrsetreg(&dram->grf->soc_noc_con[1], 0x3 << 14, 0 << 14); |
| } |
| |
| static void sdram_msch_config(struct msch_regs *msch, |
| struct sdram_msch_timings *noc_timings, |
| struct sdram_cap_info *cap_info, |
| struct sdram_base_params *base) |
| { |
| u64 cs_cap[2]; |
| |
| cs_cap[0] = sdram_get_cs_cap(cap_info, 0, base->dramtype); |
| cs_cap[1] = sdram_get_cs_cap(cap_info, 1, base->dramtype); |
| writel(((((cs_cap[1] >> 20) / 64) & 0xff) << 8) | |
| (((cs_cap[0] >> 20) / 64) & 0xff), |
| &msch->devicesize); |
| |
| writel(noc_timings->ddrtiminga0.d32, |
| &msch->ddrtiminga0); |
| writel(noc_timings->ddrtimingb0.d32, |
| &msch->ddrtimingb0); |
| writel(noc_timings->ddrtimingc0.d32, |
| &msch->ddrtimingc0); |
| writel(noc_timings->devtodev0.d32, |
| &msch->devtodev0); |
| writel(noc_timings->ddrmode.d32, &msch->ddrmode); |
| writel(noc_timings->ddr4timing.d32, |
| &msch->ddr4timing); |
| writel(noc_timings->agingx0, &msch->agingx0); |
| writel(noc_timings->agingx0, &msch->aging0); |
| writel(noc_timings->agingx0, &msch->aging1); |
| writel(noc_timings->agingx0, &msch->aging2); |
| writel(noc_timings->agingx0, &msch->aging3); |
| } |
| |
| static void dram_all_config(struct dram_info *dram, |
| struct px30_sdram_params *sdram_params) |
| { |
| struct sdram_cap_info *cap_info = &sdram_params->ch.cap_info; |
| u32 sys_reg2 = 0; |
| u32 sys_reg3 = 0; |
| |
| set_ddrconfig(dram, cap_info->ddrconfig); |
| sdram_org_config(cap_info, &sdram_params->base, &sys_reg2, |
| &sys_reg3, 0); |
| writel(sys_reg2, &dram->pmugrf->os_reg[2]); |
| writel(sys_reg3, &dram->pmugrf->os_reg[3]); |
| sdram_msch_config(dram->msch, &sdram_params->ch.noc_timings, cap_info, |
| &sdram_params->base); |
| } |
| |
| static void enable_low_power(struct dram_info *dram, |
| struct px30_sdram_params *sdram_params) |
| { |
| void __iomem *pctl_base = dram->pctl; |
| void __iomem *phy_base = dram->phy; |
| void __iomem *ddr_grf_base = dram->ddr_grf; |
| u32 grf_lp_con; |
| |
| /* |
| * bit0: grf_upctl_axi_cg_en = 1 enable upctl2 axi clk auto gating |
| * bit1: grf_upctl_apb_cg_en = 1 ungated axi,core clk for apb access |
| * bit2: grf_upctl_core_cg_en = 1 enable upctl2 core clk auto gating |
| * bit3: grf_selfref_type2_en = 0 disable core clk gating when type2 sr |
| * bit4: grf_upctl_syscreq_cg_en = 1 |
| * ungating coreclk when c_sysreq assert |
| * bit8-11: grf_auto_sr_dly = 6 |
| */ |
| writel(0x1f1f0617, &dram->ddr_grf->ddr_grf_con[1]); |
| |
| if (sdram_params->base.dramtype == DDR4) |
| grf_lp_con = (0x7 << 16) | (1 << 1); |
| else if (sdram_params->base.dramtype == DDR3) |
| grf_lp_con = (0x7 << 16) | (1 << 0); |
| else |
| grf_lp_con = (0x7 << 16) | (1 << 2); |
| |
| /* en lpckdis_en */ |
| grf_lp_con = grf_lp_con | (0x1 << (9 + 16)) | (0x1 << 9); |
| writel(grf_lp_con, ddr_grf_base + DDR_GRF_LP_CON); |
| |
| /* off digit module clock when enter power down */ |
| setbits_le32(PHY_REG(phy_base, 7), 1 << 7); |
| |
| /* enable sr, pd */ |
| if (PD_IDLE == 0) |
| clrbits_le32(pctl_base + DDR_PCTL2_PWRCTL, (1 << 1)); |
| else |
| setbits_le32(pctl_base + DDR_PCTL2_PWRCTL, (1 << 1)); |
| if (SR_IDLE == 0) |
| clrbits_le32(pctl_base + DDR_PCTL2_PWRCTL, 1); |
| else |
| setbits_le32(pctl_base + DDR_PCTL2_PWRCTL, 1); |
| setbits_le32(pctl_base + DDR_PCTL2_PWRCTL, (1 << 3)); |
| } |
| |
| /* |
| * pre_init: 0: pre init for dram cap detect |
| * 1: detect correct cap(except cs1 row)info, than reinit |
| * 2: after reinit, we detect cs1_row, if cs1_row not equal |
| * to cs0_row and cs is in middle on ddrconf map, we need |
| * to reinit dram, than set the correct ddrconf. |
| */ |
| static int sdram_init_(struct dram_info *dram, |
| struct px30_sdram_params *sdram_params, u32 pre_init) |
| { |
| struct sdram_cap_info *cap_info = &sdram_params->ch.cap_info; |
| void __iomem *pctl_base = dram->pctl; |
| |
| rkclk_ddr_reset(dram, 1, 1, 1, 1); |
| udelay(10); |
| /* |
| * dereset ddr phy psrstn to config pll, |
| * if using phy pll psrstn must be dereset |
| * before config pll |
| */ |
| rkclk_ddr_reset(dram, 1, 1, 1, 0); |
| rkclk_configure_ddr(dram, sdram_params); |
| |
| /* release phy srst to provide clk to ctrl */ |
| rkclk_ddr_reset(dram, 1, 1, 0, 0); |
| udelay(10); |
| phy_soft_reset(dram->phy); |
| /* release ctrl presetn, and config ctl registers */ |
| rkclk_ddr_reset(dram, 1, 0, 0, 0); |
| pctl_cfg(dram->pctl, &sdram_params->pctl_regs, SR_IDLE, PD_IDLE); |
| cap_info->ddrconfig = calculate_ddrconfig(sdram_params); |
| set_ctl_address_map(dram, sdram_params); |
| phy_cfg(dram->phy, &sdram_params->phy_regs, sdram_params->skew, |
| &sdram_params->base, cap_info->bw); |
| |
| /* enable dfi_init_start to init phy after ctl srstn deassert */ |
| setbits_le32(pctl_base + DDR_PCTL2_DFIMISC, (1 << 5) | (1 << 4)); |
| |
| rkclk_ddr_reset(dram, 0, 0, 0, 0); |
| /* wait for dfi_init_done and dram init complete */ |
| while ((readl(pctl_base + DDR_PCTL2_STAT) & 0x7) == 0) |
| continue; |
| |
| if (sdram_params->base.dramtype == LPDDR3) |
| pctl_write_mr(dram->pctl, 3, 11, 3, LPDDR3); |
| |
| /* do ddr gate training */ |
| redo_cs0_training: |
| if (data_training(dram, 0, sdram_params->base.dramtype) != 0) { |
| if (pre_init != 0) |
| printascii("DTT cs0 error\n"); |
| return -1; |
| } |
| if (check_rd_gate(dram)) { |
| printascii("re training cs0"); |
| goto redo_cs0_training; |
| } |
| |
| if (sdram_params->base.dramtype == LPDDR3) { |
| if ((read_mr(dram, 1, 8) & 0x3) != 0x3) |
| return -1; |
| } else if (sdram_params->base.dramtype == LPDDR2) { |
| if ((read_mr(dram, 1, 8) & 0x3) != 0x0) |
| return -1; |
| } |
| /* for px30: when 2cs, both 2 cs should be training */ |
| if (pre_init != 0 && cap_info->rank == 2) { |
| redo_cs1_training: |
| if (data_training(dram, 1, sdram_params->base.dramtype) != 0) { |
| printascii("DTT cs1 error\n"); |
| return -1; |
| } |
| if (check_rd_gate(dram)) { |
| printascii("re training cs1"); |
| goto redo_cs1_training; |
| } |
| } |
| |
| if (sdram_params->base.dramtype == DDR4) |
| pctl_write_vrefdq(dram->pctl, 0x3, 5670, |
| sdram_params->base.dramtype); |
| |
| dram_all_config(dram, sdram_params); |
| enable_low_power(dram, sdram_params); |
| |
| return 0; |
| } |
| |
| static int dram_detect_cap(struct dram_info *dram, |
| struct px30_sdram_params *sdram_params, |
| unsigned char channel) |
| { |
| struct sdram_cap_info *cap_info = &sdram_params->ch.cap_info; |
| |
| /* |
| * for ddr3: ddrconf = 3 |
| * for ddr4: ddrconf = 12 |
| * for lpddr3: ddrconf = 3 |
| * default bw = 1 |
| */ |
| u32 bk, bktmp; |
| u32 col, coltmp; |
| u32 rowtmp; |
| u32 cs; |
| u32 bw = 1; |
| u32 dram_type = sdram_params->base.dramtype; |
| |
| if (dram_type != DDR4) { |
| /* detect col and bk for ddr3/lpddr3 */ |
| coltmp = 12; |
| bktmp = 3; |
| if (dram_type == LPDDR2) |
| rowtmp = 15; |
| else |
| rowtmp = 16; |
| |
| if (sdram_detect_col(cap_info, coltmp) != 0) |
| goto cap_err; |
| sdram_detect_bank(cap_info, coltmp, bktmp); |
| sdram_detect_dbw(cap_info, dram_type); |
| } else { |
| /* detect bg for ddr4 */ |
| coltmp = 10; |
| bktmp = 4; |
| rowtmp = 17; |
| |
| col = 10; |
| bk = 2; |
| cap_info->col = col; |
| cap_info->bk = bk; |
| sdram_detect_bg(cap_info, coltmp); |
| } |
| |
| /* detect row */ |
| if (sdram_detect_row(cap_info, coltmp, bktmp, rowtmp) != 0) |
| goto cap_err; |
| |
| /* detect row_3_4 */ |
| sdram_detect_row_3_4(cap_info, coltmp, bktmp); |
| |
| /* bw and cs detect using data training */ |
| if (data_training(dram, 1, dram_type) == 0) |
| cs = 1; |
| else |
| cs = 0; |
| cap_info->rank = cs + 1; |
| |
| dram_set_bw(dram, 2); |
| if (data_training(dram, 0, dram_type) == 0) |
| bw = 2; |
| else |
| bw = 1; |
| cap_info->bw = bw; |
| |
| cap_info->cs0_high16bit_row = cap_info->cs0_row; |
| if (cs) { |
| cap_info->cs1_row = cap_info->cs0_row; |
| cap_info->cs1_high16bit_row = cap_info->cs0_row; |
| } else { |
| cap_info->cs1_row = 0; |
| cap_info->cs1_high16bit_row = 0; |
| } |
| |
| return 0; |
| cap_err: |
| return -1; |
| } |
| |
| /* return: 0 = success, other = fail */ |
| static int sdram_init_detect(struct dram_info *dram, |
| struct px30_sdram_params *sdram_params) |
| { |
| struct sdram_cap_info *cap_info = &sdram_params->ch.cap_info; |
| u32 ret; |
| u32 sys_reg = 0; |
| u32 sys_reg3 = 0; |
| |
| if (sdram_init_(dram, sdram_params, 0) != 0) |
| return -1; |
| |
| if (dram_detect_cap(dram, sdram_params, 0) != 0) |
| return -1; |
| |
| /* modify bw, cs related timing */ |
| pctl_remodify_sdram_params(&sdram_params->pctl_regs, cap_info, |
| sdram_params->base.dramtype); |
| /* reinit sdram by real dram cap */ |
| ret = sdram_init_(dram, sdram_params, 1); |
| if (ret != 0) |
| goto out; |
| |
| /* redetect cs1 row */ |
| sdram_detect_cs1_row(cap_info, sdram_params->base.dramtype); |
| if (cap_info->cs1_row) { |
| sys_reg = readl(&dram->pmugrf->os_reg[2]); |
| sys_reg3 = readl(&dram->pmugrf->os_reg[3]); |
| SYS_REG_ENC_CS1_ROW(cap_info->cs1_row, |
| sys_reg, sys_reg3, 0); |
| writel(sys_reg, &dram->pmugrf->os_reg[2]); |
| writel(sys_reg3, &dram->pmugrf->os_reg[3]); |
| } |
| |
| ret = sdram_detect_high_row(cap_info); |
| |
| out: |
| return ret; |
| } |
| |
| struct px30_sdram_params |
| *get_default_sdram_config(void) |
| { |
| sdram_configs[0].skew = &skew; |
| |
| return &sdram_configs[0]; |
| } |
| |
| /* return: 0 = success, other = fail */ |
| int sdram_init(void) |
| { |
| struct px30_sdram_params *sdram_params; |
| int ret = 0; |
| |
| dram_info.phy = (void *)DDR_PHY_BASE_ADDR; |
| dram_info.pctl = (void *)DDRC_BASE_ADDR; |
| dram_info.grf = (void *)GRF_BASE_ADDR; |
| dram_info.cru = (void *)CRU_BASE_ADDR; |
| dram_info.msch = (void *)SERVER_MSCH0_BASE_ADDR; |
| dram_info.ddr_grf = (void *)DDR_GRF_BASE_ADDR; |
| dram_info.pmugrf = (void *)PMUGRF_BASE_ADDR; |
| |
| sdram_params = get_default_sdram_config(); |
| ret = sdram_init_detect(&dram_info, sdram_params); |
| |
| if (ret) |
| goto error; |
| |
| sdram_print_ddr_info(&sdram_params->ch.cap_info, &sdram_params->base); |
| |
| printascii("out\n"); |
| return ret; |
| error: |
| return (-1); |
| } |
| #else |
| |
| static int px30_dmc_probe(struct udevice *dev) |
| { |
| struct dram_info *priv = dev_get_priv(dev); |
| |
| priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); |
| debug("%s: grf=%p\n", __func__, priv->pmugrf); |
| priv->info.base = CONFIG_SYS_SDRAM_BASE; |
| priv->info.size = |
| rockchip_sdram_size((phys_addr_t)&priv->pmugrf->os_reg[2]); |
| |
| return 0; |
| } |
| |
| static int px30_dmc_get_info(struct udevice *dev, struct ram_info *info) |
| { |
| struct dram_info *priv = dev_get_priv(dev); |
| |
| *info = priv->info; |
| |
| return 0; |
| } |
| |
| static struct ram_ops px30_dmc_ops = { |
| .get_info = px30_dmc_get_info, |
| }; |
| |
| static const struct udevice_id px30_dmc_ids[] = { |
| { .compatible = "rockchip,px30-dmc" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(dmc_px30) = { |
| .name = "rockchip_px30_dmc", |
| .id = UCLASS_RAM, |
| .of_match = px30_dmc_ids, |
| .ops = &px30_dmc_ops, |
| .probe = px30_dmc_probe, |
| .priv_auto_alloc_size = sizeof(struct dram_info), |
| }; |
| #endif /* CONFIG_TPL_BUILD */ |