| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2007 |
| * Sascha Hauer, Pengutronix |
| * |
| * (C) Copyright 2009 Freescale Semiconductor, Inc. |
| */ |
| |
| #include <bootm.h> |
| #include <dm.h> |
| #include <init.h> |
| #include <log.h> |
| #include <net.h> |
| #include <netdev.h> |
| #include <linux/errno.h> |
| #include <asm/io.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/arch/crm_regs.h> |
| #include <asm/mach-imx/boot_mode.h> |
| #include <imx_thermal.h> |
| #include <ipu_pixfmt.h> |
| #include <thermal.h> |
| #include <sata.h> |
| #include <dm/device-internal.h> |
| #include <dm/uclass-internal.h> |
| |
| #ifdef CONFIG_FSL_ESDHC_IMX |
| #include <fsl_esdhc_imx.h> |
| #endif |
| |
| static u32 reset_cause = -1; |
| |
| u32 get_imx_reset_cause(void) |
| { |
| struct src *src_regs = (struct src *)SRC_BASE_ADDR; |
| |
| if (reset_cause == -1) { |
| reset_cause = readl(&src_regs->srsr); |
| /* preserve the value for U-Boot proper */ |
| #if !defined(CONFIG_XPL_BUILD) |
| writel(reset_cause, &src_regs->srsr); |
| #endif |
| } |
| |
| return reset_cause; |
| } |
| |
| #if defined(CONFIG_DISPLAY_CPUINFO) && !defined(CONFIG_XPL_BUILD) |
| static char *get_reset_cause(void) |
| { |
| switch (get_imx_reset_cause()) { |
| case 0x00001: |
| case 0x00011: |
| return "POR"; |
| case 0x00004: |
| return "CSU"; |
| case 0x00008: |
| return "IPP USER"; |
| case 0x00010: |
| #ifdef CONFIG_MX7 |
| return "WDOG1"; |
| #else |
| return "WDOG"; |
| #endif |
| case 0x00020: |
| return "JTAG HIGH-Z"; |
| case 0x00040: |
| return "JTAG SW"; |
| case 0x00080: |
| return "WDOG3"; |
| #ifdef CONFIG_MX7 |
| case 0x00100: |
| return "WDOG4"; |
| case 0x00200: |
| return "TEMPSENSE"; |
| #elif defined(CONFIG_IMX8M) |
| case 0x00100: |
| return "WDOG2"; |
| case 0x00200: |
| return "TEMPSENSE"; |
| #else |
| case 0x00100: |
| return "TEMPSENSE"; |
| case 0x10000: |
| return "WARM BOOT"; |
| #endif |
| default: |
| return "unknown reset"; |
| } |
| } |
| #endif |
| |
| #if defined(CONFIG_DISPLAY_CPUINFO) && !defined(CONFIG_XPL_BUILD) |
| |
| const char *get_imx_type(u32 imxtype) |
| { |
| switch (imxtype) { |
| case MXC_CPU_IMX8MP: |
| return "8MP[8]"; /* Quad-core version of the imx8mp */ |
| case MXC_CPU_IMX8MPD: |
| return "8MP Dual[3]"; /* Dual-core version of the imx8mp */ |
| case MXC_CPU_IMX8MPL: |
| return "8MP Lite[4]"; /* Quad-core Lite version of the imx8mp */ |
| case MXC_CPU_IMX8MP6: |
| return "8MP[6]"; /* Quad-core version of the imx8mp, NPU fused */ |
| case MXC_CPU_IMX8MPUL: |
| return "8MP UltraLite"; /* Quad-core UltraLite version of the imx8mp */ |
| case MXC_CPU_IMX8MN: |
| return "8MNano Quad"; /* Quad-core version */ |
| case MXC_CPU_IMX8MND: |
| return "8MNano Dual"; /* Dual-core version */ |
| case MXC_CPU_IMX8MNS: |
| return "8MNano Solo"; /* Single-core version */ |
| case MXC_CPU_IMX8MNL: |
| return "8MNano QuadLite"; /* Quad-core Lite version */ |
| case MXC_CPU_IMX8MNDL: |
| return "8MNano DualLite"; /* Dual-core Lite version */ |
| case MXC_CPU_IMX8MNSL: |
| return "8MNano SoloLite";/* Single-core Lite version of the imx8mn */ |
| case MXC_CPU_IMX8MNUQ: |
| return "8MNano UltraLite Quad";/* Quad-core UltraLite version of the imx8mn */ |
| case MXC_CPU_IMX8MNUD: |
| return "8MNano UltraLite Dual";/* Dual-core UltraLite version of the imx8mn */ |
| case MXC_CPU_IMX8MNUS: |
| return "8MNano UltraLite Solo";/* Single-core UltraLite version of the imx8mn */ |
| case MXC_CPU_IMX8MM: |
| return "8MMQ"; /* Quad-core version of the imx8mm */ |
| case MXC_CPU_IMX8MML: |
| return "8MMQL"; /* Quad-core Lite version of the imx8mm */ |
| case MXC_CPU_IMX8MMD: |
| return "8MMD"; /* Dual-core version of the imx8mm */ |
| case MXC_CPU_IMX8MMDL: |
| return "8MMDL"; /* Dual-core Lite version of the imx8mm */ |
| case MXC_CPU_IMX8MMS: |
| return "8MMS"; /* Single-core version of the imx8mm */ |
| case MXC_CPU_IMX8MMSL: |
| return "8MMSL"; /* Single-core Lite version of the imx8mm */ |
| case MXC_CPU_IMX8MQ: |
| return "8MQ"; /* Quad-core version of the imx8mq */ |
| case MXC_CPU_IMX8MQL: |
| return "8MQLite"; /* Quad-core Lite version of the imx8mq */ |
| case MXC_CPU_IMX8MD: |
| return "8MD"; /* Dual-core version of the imx8mq */ |
| case MXC_CPU_MX7S: |
| return "7S"; /* Single-core version of the mx7 */ |
| case MXC_CPU_MX7D: |
| return "7D"; /* Dual-core version of the mx7 */ |
| case MXC_CPU_MX6QP: |
| return "6QP"; /* Quad-Plus version of the mx6 */ |
| case MXC_CPU_MX6DP: |
| return "6DP"; /* Dual-Plus version of the mx6 */ |
| case MXC_CPU_MX6Q: |
| return "6Q"; /* Quad-core version of the mx6 */ |
| case MXC_CPU_MX6D: |
| return "6D"; /* Dual-core version of the mx6 */ |
| case MXC_CPU_MX6DL: |
| return "6DL"; /* Dual Lite version of the mx6 */ |
| case MXC_CPU_MX6SOLO: |
| return "6SOLO"; /* Solo version of the mx6 */ |
| case MXC_CPU_MX6SL: |
| return "6SL"; /* Solo-Lite version of the mx6 */ |
| case MXC_CPU_MX6SLL: |
| return "6SLL"; /* SLL version of the mx6 */ |
| case MXC_CPU_MX6SX: |
| return "6SX"; /* SoloX version of the mx6 */ |
| case MXC_CPU_MX6UL: |
| return "6UL"; /* Ultra-Lite version of the mx6 */ |
| case MXC_CPU_MX6ULL: |
| return "6ULL"; /* ULL version of the mx6 */ |
| case MXC_CPU_MX6ULZ: |
| return "6ULZ"; /* ULZ version of the mx6 */ |
| case MXC_CPU_MX51: |
| return "51"; |
| case MXC_CPU_MX53: |
| return "53"; |
| default: |
| return "??"; |
| } |
| } |
| |
| int print_cpuinfo(void) |
| { |
| u32 cpurev; |
| __maybe_unused u32 max_freq; |
| |
| cpurev = get_cpu_rev(); |
| |
| #if defined(CONFIG_IMX_THERMAL) || defined(CONFIG_IMX_TMU) |
| struct udevice *thermal_dev; |
| int cpu_tmp, minc, maxc, ret; |
| |
| printf("CPU: Freescale i.MX%s rev%d.%d", |
| get_imx_type((cpurev & 0x1FF000) >> 12), |
| (cpurev & 0x000F0) >> 4, |
| (cpurev & 0x0000F) >> 0); |
| max_freq = get_cpu_speed_grade_hz(); |
| if (!max_freq || max_freq == mxc_get_clock(MXC_ARM_CLK)) { |
| printf(" at %dMHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000); |
| } else { |
| printf(" %d MHz (running at %d MHz)\n", max_freq / 1000000, |
| mxc_get_clock(MXC_ARM_CLK) / 1000000); |
| } |
| #else |
| printf("CPU: Freescale i.MX%s rev%d.%d at %d MHz\n", |
| get_imx_type((cpurev & 0x1FF000) >> 12), |
| (cpurev & 0x000F0) >> 4, |
| (cpurev & 0x0000F) >> 0, |
| mxc_get_clock(MXC_ARM_CLK) / 1000000); |
| #endif |
| |
| #if defined(CONFIG_IMX_THERMAL) || defined(CONFIG_IMX_TMU) |
| puts("CPU: "); |
| switch (get_cpu_temp_grade(&minc, &maxc)) { |
| case TEMP_AUTOMOTIVE: |
| puts("Automotive temperature grade "); |
| break; |
| case TEMP_INDUSTRIAL: |
| puts("Industrial temperature grade "); |
| break; |
| case TEMP_EXTCOMMERCIAL: |
| puts("Extended Commercial temperature grade "); |
| break; |
| default: |
| puts("Commercial temperature grade "); |
| break; |
| } |
| printf("(%dC to %dC)", minc, maxc); |
| ret = uclass_get_device(UCLASS_THERMAL, 0, &thermal_dev); |
| if (!ret) { |
| ret = thermal_get_temp(thermal_dev, &cpu_tmp); |
| |
| if (!ret) |
| printf(" at %dC", cpu_tmp); |
| else |
| debug(" - invalid sensor data\n"); |
| } else { |
| debug(" - invalid sensor device\n"); |
| } |
| puts("\n"); |
| #endif |
| |
| printf("Reset cause: %s\n", get_reset_cause()); |
| return 0; |
| } |
| #endif |
| |
| int cpu_eth_init(struct bd_info *bis) |
| { |
| int rc = -ENODEV; |
| |
| #if defined(CONFIG_FEC_MXC) |
| rc = fecmxc_initialize(bis); |
| #endif |
| |
| return rc; |
| } |
| |
| #ifdef CONFIG_FSL_ESDHC_IMX |
| /* |
| * Initializes on-chip MMC controllers. |
| * to override, implement board_mmc_init() |
| */ |
| int cpu_mmc_init(struct bd_info *bis) |
| { |
| return fsl_esdhc_mmc_init(bis); |
| } |
| #endif |
| |
| #if !(defined(CONFIG_MX7) || defined(CONFIG_IMX8M)) |
| u32 get_ahb_clk(void) |
| { |
| struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; |
| u32 reg, ahb_podf; |
| |
| reg = __raw_readl(&imx_ccm->cbcdr); |
| reg &= MXC_CCM_CBCDR_AHB_PODF_MASK; |
| ahb_podf = reg >> MXC_CCM_CBCDR_AHB_PODF_OFFSET; |
| |
| return get_periph_clk() / (ahb_podf + 1); |
| } |
| #endif |
| |
| void arch_preboot_os(void) |
| { |
| #if defined(CONFIG_IMX_AHCI) |
| struct udevice *dev; |
| int rc; |
| |
| rc = uclass_find_device(UCLASS_AHCI, 0, &dev); |
| if (!rc && dev) { |
| rc = device_remove(dev, DM_REMOVE_NORMAL); |
| if (rc) |
| printf("Cannot remove SATA device '%s' (err=%d)\n", |
| dev->name, rc); |
| } |
| #endif |
| |
| #if defined(CONFIG_SATA) |
| if (!is_mx6sdl()) { |
| sata_remove(0); |
| #if defined(CONFIG_MX6) |
| disable_sata_clock(); |
| #endif |
| } |
| #endif |
| #if defined(CONFIG_VIDEO_IPUV3) |
| /* disable video before launching O/S */ |
| ipuv3_fb_shutdown(); |
| #endif |
| #if defined(CONFIG_VIDEO_MXS) && !defined(CONFIG_VIDEO) |
| lcdif_power_down(); |
| #endif |
| } |
| |
| #ifndef CONFIG_IMX8M |
| void set_chipselect_size(int const cs_size) |
| { |
| unsigned int reg; |
| struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; |
| reg = readl(&iomuxc_regs->gpr[1]); |
| |
| switch (cs_size) { |
| case CS0_128: |
| reg &= ~0x7; /* CS0=128MB, CS1=0, CS2=0, CS3=0 */ |
| reg |= 0x5; |
| break; |
| case CS0_64M_CS1_64M: |
| reg &= ~0x3F; /* CS0=64MB, CS1=64MB, CS2=0, CS3=0 */ |
| reg |= 0x1B; |
| break; |
| case CS0_64M_CS1_32M_CS2_32M: |
| reg &= ~0x1FF; /* CS0=64MB, CS1=32MB, CS2=32MB, CS3=0 */ |
| reg |= 0x4B; |
| break; |
| case CS0_32M_CS1_32M_CS2_32M_CS3_32M: |
| reg &= ~0xFFF; /* CS0=32MB, CS1=32MB, CS2=32MB, CS3=32MB */ |
| reg |= 0x249; |
| break; |
| default: |
| printf("Unknown chip select size: %d\n", cs_size); |
| break; |
| } |
| |
| writel(reg, &iomuxc_regs->gpr[1]); |
| } |
| #endif |
| |
| #if defined(CONFIG_MX7) || defined(CONFIG_IMX8M) |
| /* |
| * OCOTP_TESTER3[9:8] (see Fusemap Description Table offset 0x440) |
| * defines a 2-bit SPEED_GRADING |
| */ |
| #define OCOTP_TESTER3_SPEED_SHIFT 8 |
| enum cpu_speed { |
| OCOTP_TESTER3_SPEED_GRADE0, |
| OCOTP_TESTER3_SPEED_GRADE1, |
| OCOTP_TESTER3_SPEED_GRADE2, |
| OCOTP_TESTER3_SPEED_GRADE3, |
| OCOTP_TESTER3_SPEED_GRADE4, |
| }; |
| |
| u32 get_cpu_speed_grade_hz(void) |
| { |
| struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; |
| struct fuse_bank *bank = &ocotp->bank[1]; |
| struct fuse_bank1_regs *fuse = |
| (struct fuse_bank1_regs *)bank->fuse_regs; |
| uint32_t val; |
| |
| val = readl(&fuse->tester3); |
| val >>= OCOTP_TESTER3_SPEED_SHIFT; |
| |
| if (is_imx8mn() || is_imx8mp()) { |
| val &= 0xf; |
| return 2300000000 - val * 100000000; |
| } |
| |
| if (is_imx8mm()) |
| val &= 0x7; |
| else |
| val &= 0x3; |
| |
| switch(val) { |
| case OCOTP_TESTER3_SPEED_GRADE0: |
| return 800000000; |
| case OCOTP_TESTER3_SPEED_GRADE1: |
| return (is_mx7() ? 500000000 : (is_imx8mq() ? 1000000000 : 1200000000)); |
| case OCOTP_TESTER3_SPEED_GRADE2: |
| return (is_mx7() ? 1000000000 : (is_imx8mq() ? 1300000000 : 1600000000)); |
| case OCOTP_TESTER3_SPEED_GRADE3: |
| return (is_mx7() ? 1200000000 : (is_imx8mq() ? 1500000000 : 1800000000)); |
| case OCOTP_TESTER3_SPEED_GRADE4: |
| return 2000000000; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * OCOTP_TESTER3[7:6] (see Fusemap Description Table offset 0x440) |
| * defines a 2-bit SPEED_GRADING |
| */ |
| #define OCOTP_TESTER3_TEMP_SHIFT 6 |
| |
| /* iMX8MP uses OCOTP_TESTER3[6:5] for Market segment */ |
| #define IMX8MP_OCOTP_TESTER3_TEMP_SHIFT 5 |
| |
| u32 get_cpu_temp_grade(int *minc, int *maxc) |
| { |
| struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; |
| struct fuse_bank *bank = &ocotp->bank[1]; |
| struct fuse_bank1_regs *fuse = |
| (struct fuse_bank1_regs *)bank->fuse_regs; |
| uint32_t val; |
| |
| val = readl(&fuse->tester3); |
| if (is_imx8mp()) |
| val >>= IMX8MP_OCOTP_TESTER3_TEMP_SHIFT; |
| else |
| val >>= OCOTP_TESTER3_TEMP_SHIFT; |
| val &= 0x3; |
| |
| if (minc && maxc) { |
| if (val == TEMP_AUTOMOTIVE) { |
| *minc = -40; |
| *maxc = 125; |
| } else if (val == TEMP_INDUSTRIAL) { |
| *minc = -40; |
| *maxc = 105; |
| } else if (val == TEMP_EXTCOMMERCIAL) { |
| *minc = -20; |
| *maxc = 105; |
| } else { |
| *minc = 0; |
| *maxc = 95; |
| } |
| } |
| return val; |
| } |
| #endif |
| |
| #if defined(CONFIG_MX7) || defined(CONFIG_IMX8MQ) || defined(CONFIG_IMX8MM) |
| enum boot_device get_boot_device(void) |
| { |
| struct bootrom_sw_info **p = |
| (struct bootrom_sw_info **)(ulong)ROM_SW_INFO_ADDR; |
| |
| enum boot_device boot_dev = SD1_BOOT; |
| u8 boot_type = (*p)->boot_dev_type; |
| u8 boot_instance = (*p)->boot_dev_instance; |
| |
| switch (boot_type) { |
| case BOOT_TYPE_SD: |
| boot_dev = boot_instance + SD1_BOOT; |
| break; |
| case BOOT_TYPE_MMC: |
| boot_dev = boot_instance + MMC1_BOOT; |
| break; |
| case BOOT_TYPE_NAND: |
| boot_dev = NAND_BOOT; |
| break; |
| case BOOT_TYPE_QSPI: |
| boot_dev = QSPI_BOOT; |
| break; |
| case BOOT_TYPE_WEIM: |
| boot_dev = WEIM_NOR_BOOT; |
| break; |
| case BOOT_TYPE_SPINOR: |
| boot_dev = SPI_NOR_BOOT; |
| break; |
| case BOOT_TYPE_USB: |
| boot_dev = USB_BOOT; |
| break; |
| default: |
| #ifdef CONFIG_IMX8M |
| if (((readl(SRC_BASE_ADDR + 0x58) & 0x00007FFF) >> 12) == 0x4) |
| boot_dev = QSPI_BOOT; |
| #endif |
| break; |
| } |
| |
| return boot_dev; |
| } |
| #endif |
| |
| #ifdef CONFIG_NXP_BOARD_REVISION |
| int nxp_board_rev(void) |
| { |
| /* |
| * Get Board ID information from OCOTP_GP1[15:8] |
| * RevA: 0x1 |
| * RevB: 0x2 |
| * RevC: 0x3 |
| */ |
| struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; |
| struct fuse_bank *bank = &ocotp->bank[4]; |
| struct fuse_bank4_regs *fuse = |
| (struct fuse_bank4_regs *)bank->fuse_regs; |
| |
| return (readl(&fuse->gp1) >> 8 & 0x0F); |
| } |
| |
| char nxp_board_rev_string(void) |
| { |
| const char *rev = "A"; |
| |
| return (*rev + nxp_board_rev() - 1); |
| } |
| #endif |
| |
| __weak void reset_cpu(void) |
| { |
| } |