drivers/mtd/nand/raw/fsmc_nand.c - filogic/uboot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * (C) Copyright 2010
  * Vipin Kumar, STMicroelectronics, vipin.kumar@st.com.
  *
  * (C) Copyright 2012
  * Amit Virdi, STMicroelectronics, amit.virdi@st.com.
  */

 #include <common.h>
 #include <nand.h>
 #include <asm/io.h>
 #include <linux/bitops.h>
 #include <linux/err.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/fsmc_nand.h>
 #include <asm/arch/hardware.h>

 static u32 fsmc_version;
 static struct fsmc_regs *const fsmc_regs_p = (struct fsmc_regs *)
 	CONFIG_SYS_FSMC_BASE;

 /*
  * ECC4 and ECC1 have 13 bytes and 3 bytes of ecc respectively for 512 bytes of
  * data. ECC4 can correct up to 8 bits in 512 bytes of data while ECC1 can
  * correct 1 bit in 512 bytes
  */

 static struct nand_ecclayout fsmc_ecc4_lp_layout = {
 	.eccbytes = 104,
 	.eccpos = {  2,   3,   4,   5,   6,   7,   8,
 		9,  10,  11,  12,  13,  14,
 		18,  19,  20,  21,  22,  23,  24,
 		25,  26,  27,  28,  29,  30,
 		34,  35,  36,  37,  38,  39,  40,
 		41,  42,  43,  44,  45,  46,
 		50,  51,  52,  53,  54,  55,  56,
 		57,  58,  59,  60,  61,  62,
 		66,  67,  68,  69,  70,  71,  72,
 		73,  74,  75,  76,  77,  78,
 		82,  83,  84,  85,  86,  87,  88,
 		89,  90,  91,  92,  93,  94,
 		98,  99, 100, 101, 102, 103, 104,
 		105, 106, 107, 108, 109, 110,
 		114, 115, 116, 117, 118, 119, 120,
 		121, 122, 123, 124, 125, 126
 	},
 	.oobfree = {
 		{.offset = 15, .length = 3},
 		{.offset = 31, .length = 3},
 		{.offset = 47, .length = 3},
 		{.offset = 63, .length = 3},
 		{.offset = 79, .length = 3},
 		{.offset = 95, .length = 3},
 		{.offset = 111, .length = 3},
 		{.offset = 127, .length = 1}
 	}
 };

 /*
  * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 224 bytes. 13*8 bytes
  * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 118
  * bytes are free for use.
  */
 static struct nand_ecclayout fsmc_ecc4_224_layout = {
 	.eccbytes = 104,
 	.eccpos = {  2,   3,   4,   5,   6,   7,   8,
 		9,  10,  11,  12,  13,  14,
 		18,  19,  20,  21,  22,  23,  24,
 		25,  26,  27,  28,  29,  30,
 		34,  35,  36,  37,  38,  39,  40,
 		41,  42,  43,  44,  45,  46,
 		50,  51,  52,  53,  54,  55,  56,
 		57,  58,  59,  60,  61,  62,
 		66,  67,  68,  69,  70,  71,  72,
 		73,  74,  75,  76,  77,  78,
 		82,  83,  84,  85,  86,  87,  88,
 		89,  90,  91,  92,  93,  94,
 		98,  99, 100, 101, 102, 103, 104,
 		105, 106, 107, 108, 109, 110,
 		114, 115, 116, 117, 118, 119, 120,
 		121, 122, 123, 124, 125, 126
 	},
 	.oobfree = {
 		{.offset = 15, .length = 3},
 		{.offset = 31, .length = 3},
 		{.offset = 47, .length = 3},
 		{.offset = 63, .length = 3},
 		{.offset = 79, .length = 3},
 		{.offset = 95, .length = 3},
 		{.offset = 111, .length = 3},
 		{.offset = 127, .length = 97}
 	}
 };

 /*
  * ECC placement definitions in oobfree type format
  * There are 13 bytes of ecc for every 512 byte block and it has to be read
  * consecutively and immediately after the 512 byte data block for hardware to
  * generate the error bit offsets in 512 byte data
  * Managing the ecc bytes in the following way makes it easier for software to
  * read ecc bytes consecutive to data bytes. This way is similar to
  * oobfree structure maintained already in u-boot nand driver
  */
 static struct fsmc_eccplace fsmc_eccpl_lp = {
 	.eccplace = {
 		{.offset = 2, .length = 13},
 		{.offset = 18, .length = 13},
 		{.offset = 34, .length = 13},
 		{.offset = 50, .length = 13},
 		{.offset = 66, .length = 13},
 		{.offset = 82, .length = 13},
 		{.offset = 98, .length = 13},
 		{.offset = 114, .length = 13}
 	}
 };

 static struct nand_ecclayout fsmc_ecc4_sp_layout = {
 	.eccbytes = 13,
 	.eccpos = { 0,  1,  2,  3,  6,  7, 8,
 		9, 10, 11, 12, 13, 14
 	},
 	.oobfree = {
 		{.offset = 15, .length = 1},
 	}
 };

 static struct fsmc_eccplace fsmc_eccpl_sp = {
 	.eccplace = {
 		{.offset = 0, .length = 4},
 		{.offset = 6, .length = 9}
 	}
 };

 static struct nand_ecclayout fsmc_ecc1_layout = {
 	.eccbytes = 24,
 	.eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52,
 		66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116},
 	.oobfree = {
 		{.offset = 8, .length = 8},
 		{.offset = 24, .length = 8},
 		{.offset = 40, .length = 8},
 		{.offset = 56, .length = 8},
 		{.offset = 72, .length = 8},
 		{.offset = 88, .length = 8},
 		{.offset = 104, .length = 8},
 		{.offset = 120, .length = 8}
 	}
 };

 /* Count the number of 0's in buff upto a max of max_bits */
 static int count_written_bits(uint8_t *buff, int size, int max_bits)
 {
 	int k, written_bits = 0;

 	for (k = 0; k < size; k++) {
 		written_bits += hweight8(~buff[k]);
 		if (written_bits > max_bits)
 			break;
 	}

 	return written_bits;
 }

 static void fsmc_nand_hwcontrol(struct mtd_info *mtd, int cmd, uint ctrl)
 {
 	struct nand_chip *this = mtd_to_nand(mtd);
 	ulong IO_ADDR_W;

 	if (ctrl & NAND_CTRL_CHANGE) {
 		IO_ADDR_W = (ulong)this->IO_ADDR_W;

 		IO_ADDR_W &= ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE);
 		if (ctrl & NAND_CLE)
 			IO_ADDR_W |= CONFIG_SYS_NAND_CLE;
 		if (ctrl & NAND_ALE)
 			IO_ADDR_W |= CONFIG_SYS_NAND_ALE;

 		if (ctrl & NAND_NCE) {
 			writel(readl(&fsmc_regs_p->pc) |
 					FSMC_ENABLE, &fsmc_regs_p->pc);
 		} else {
 			writel(readl(&fsmc_regs_p->pc) &
 					~FSMC_ENABLE, &fsmc_regs_p->pc);
 		}
 		this->IO_ADDR_W = (void *)IO_ADDR_W;
 	}

 	if (cmd != NAND_CMD_NONE)
 		writeb(cmd, this->IO_ADDR_W);
 }

 static int fsmc_bch8_correct_data(struct mtd_info *mtd, u_char *dat,
 		u_char *read_ecc, u_char *calc_ecc)
 {
 	/* The calculated ecc is actually the correction index in data */
 	u32 err_idx[8];
 	u32 num_err, i;
 	u32 ecc1, ecc2, ecc3, ecc4;

 	num_err = (readl(&fsmc_regs_p->sts) >> 10) & 0xF;

 	if (likely(num_err == 0))
 		return 0;

 	if (unlikely(num_err > 8)) {
 		/*
 		 * This is a temporary erase check. A newly erased page read
 		 * would result in an ecc error because the oob data is also
 		 * erased to FF and the calculated ecc for an FF data is not
 		 * FF..FF.
 		 * This is a workaround to skip performing correction in case
 		 * data is FF..FF
 		 *
 		 * Logic:
 		 * For every page, each bit written as 0 is counted until these
 		 * number of bits are greater than 8 (the maximum correction
 		 * capability of FSMC for each 512 + 13 bytes)
 		 */

 		int bits_ecc = count_written_bits(read_ecc, 13, 8);
 		int bits_data = count_written_bits(dat, 512, 8);

 		if ((bits_ecc + bits_data) <= 8) {
 			if (bits_data)
 				memset(dat, 0xff, 512);
 			return bits_data + bits_ecc;
 		}

 		return -EBADMSG;
 	}

 	ecc1 = readl(&fsmc_regs_p->ecc1);
 	ecc2 = readl(&fsmc_regs_p->ecc2);
 	ecc3 = readl(&fsmc_regs_p->ecc3);
 	ecc4 = readl(&fsmc_regs_p->sts);

 	err_idx[0] = (ecc1 >> 0) & 0x1FFF;
 	err_idx[1] = (ecc1 >> 13) & 0x1FFF;
 	err_idx[2] = (((ecc2 >> 0) & 0x7F) << 6) | ((ecc1 >> 26) & 0x3F);
 	err_idx[3] = (ecc2 >> 7) & 0x1FFF;
 	err_idx[4] = (((ecc3 >> 0) & 0x1) << 12) | ((ecc2 >> 20) & 0xFFF);
 	err_idx[5] = (ecc3 >> 1) & 0x1FFF;
 	err_idx[6] = (ecc3 >> 14) & 0x1FFF;
 	err_idx[7] = (((ecc4 >> 16) & 0xFF) << 5) | ((ecc3 >> 27) & 0x1F);

 	i = 0;
 	while (i < num_err) {
 		err_idx[i] ^= 3;

 		if (err_idx[i] < 512 * 8)
 			__change_bit(err_idx[i], dat);

 		i++;
 	}

 	return num_err;
 }

 static int fsmc_read_hwecc(struct mtd_info *mtd,
 			const u_char *data, u_char *ecc)
 {
 	u_int ecc_tmp;
 	int timeout = CONFIG_SYS_HZ;
 	ulong start;

 	switch (fsmc_version) {
 	case FSMC_VER8:
 		start = get_timer(0);
 		while (get_timer(start) < timeout) {
 			/*
 			 * Busy waiting for ecc computation
 			 * to finish for 512 bytes
 			 */
 			if (readl(&fsmc_regs_p->sts) & FSMC_CODE_RDY)
 				break;
 		}

 		ecc_tmp = readl(&fsmc_regs_p->ecc1);
 		ecc[0] = (u_char) (ecc_tmp >> 0);
 		ecc[1] = (u_char) (ecc_tmp >> 8);
 		ecc[2] = (u_char) (ecc_tmp >> 16);
 		ecc[3] = (u_char) (ecc_tmp >> 24);

 		ecc_tmp = readl(&fsmc_regs_p->ecc2);
 		ecc[4] = (u_char) (ecc_tmp >> 0);
 		ecc[5] = (u_char) (ecc_tmp >> 8);
 		ecc[6] = (u_char) (ecc_tmp >> 16);
 		ecc[7] = (u_char) (ecc_tmp >> 24);

 		ecc_tmp = readl(&fsmc_regs_p->ecc3);
 		ecc[8] = (u_char) (ecc_tmp >> 0);
 		ecc[9] = (u_char) (ecc_tmp >> 8);
 		ecc[10] = (u_char) (ecc_tmp >> 16);
 		ecc[11] = (u_char) (ecc_tmp >> 24);

 		ecc_tmp = readl(&fsmc_regs_p->sts);
 		ecc[12] = (u_char) (ecc_tmp >> 16);
 		break;

 	default:
 		ecc_tmp = readl(&fsmc_regs_p->ecc1);
 		ecc[0] = (u_char) (ecc_tmp >> 0);
 		ecc[1] = (u_char) (ecc_tmp >> 8);
 		ecc[2] = (u_char) (ecc_tmp >> 16);
 		break;
 	}

 	return 0;
 }

 void fsmc_enable_hwecc(struct mtd_info *mtd, int mode)
 {
 	writel(readl(&fsmc_regs_p->pc) & ~FSMC_ECCPLEN_256,
 			&fsmc_regs_p->pc);
 	writel(readl(&fsmc_regs_p->pc) & ~FSMC_ECCEN,
 			&fsmc_regs_p->pc);
 	writel(readl(&fsmc_regs_p->pc) | FSMC_ECCEN,
 			&fsmc_regs_p->pc);
 }

 /*
  * fsmc_read_page_hwecc
  * @mtd:	mtd info structure
  * @chip:	nand chip info structure
  * @buf:	buffer to store read data
  * @oob_required:	caller expects OOB data read to chip->oob_poi
  * @page:	page number to read
  *
  * This routine is needed for fsmc verison 8 as reading from NAND chip has to be
  * performed in a strict sequence as follows:
  * data(512 byte) -> ecc(13 byte)
  * After this read, fsmc hardware generates and reports error data bits(upto a
  * max of 8 bits)
  */
 static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 				 uint8_t *buf, int oob_required, int page)
 {
 	struct fsmc_eccplace *fsmc_eccpl;
 	int i, j, s, stat, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
 	int eccsteps = chip->ecc.steps;
 	uint8_t *p = buf;
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
 	uint8_t *ecc_code = chip->buffers->ecccode;
 	int off, len, group = 0;
 	uint8_t oob[13] __attribute__ ((aligned (2)));

 	/* Differentiate between small and large page ecc place definitions */
 	if (mtd->writesize == 512)
 		fsmc_eccpl = &fsmc_eccpl_sp;
 	else
 		fsmc_eccpl = &fsmc_eccpl_lp;

 	for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) {

 		chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page);
 		chip->ecc.hwctl(mtd, NAND_ECC_READ);
 		chip->read_buf(mtd, p, eccsize);

 		for (j = 0; j < eccbytes;) {
 			off = fsmc_eccpl->eccplace[group].offset;
 			len = fsmc_eccpl->eccplace[group].length;
 			group++;

 			/*
 			 * length is intentionally kept a higher multiple of 2
 			 * to read at least 13 bytes even in case of 16 bit NAND
 			 * devices
 			 */
 			if (chip->options & NAND_BUSWIDTH_16)
 				len = roundup(len, 2);
 			chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page);
 			chip->read_buf(mtd, oob + j, len);
 			j += len;
 		}

 		memcpy(&ecc_code[i], oob, 13);
 		chip->ecc.calculate(mtd, p, &ecc_calc[i]);

 		stat = chip->ecc.correct(mtd, p, &ecc_code[i],
 				&ecc_calc[i]);
 		if (stat < 0)
 			mtd->ecc_stats.failed++;
 		else
 			mtd->ecc_stats.corrected += stat;
 	}

 	return 0;
 }

 int fsmc_nand_init(struct nand_chip *nand)
 {
 	static int chip_nr;
 	struct mtd_info *mtd;
 	u32 peripid2 = readl(&fsmc_regs_p->peripid2);

 	fsmc_version = (peripid2 >> FSMC_REVISION_SHFT) &
 		FSMC_REVISION_MSK;

 	writel(readl(&fsmc_regs_p->ctrl) | FSMC_WP, &fsmc_regs_p->ctrl);

 #if defined(CONFIG_SYS_FSMC_NAND_16BIT)
 	writel(FSMC_DEVWID_16 | FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON,
 			&fsmc_regs_p->pc);
 #elif defined(CONFIG_SYS_FSMC_NAND_8BIT)
 	writel(FSMC_DEVWID_8 | FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON,
 			&fsmc_regs_p->pc);
 #else
 #error Please define CONFIG_SYS_FSMC_NAND_16BIT or CONFIG_SYS_FSMC_NAND_8BIT
 #endif
 	writel(readl(&fsmc_regs_p->pc) | FSMC_TCLR_1 | FSMC_TAR_1,
 			&fsmc_regs_p->pc);
 	writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
 			&fsmc_regs_p->comm);
 	writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
 			&fsmc_regs_p->attrib);

 	nand->options = 0;
 #if defined(CONFIG_SYS_FSMC_NAND_16BIT)
 	nand->options |= NAND_BUSWIDTH_16;
 #endif
 	nand->ecc.mode = NAND_ECC_HW;
 	nand->ecc.size = 512;
 	nand->ecc.calculate = fsmc_read_hwecc;
 	nand->ecc.hwctl = fsmc_enable_hwecc;
 	nand->cmd_ctrl = fsmc_nand_hwcontrol;
 	nand->IO_ADDR_R = nand->IO_ADDR_W =
 		(void  __iomem *)CONFIG_SYS_NAND_BASE;
 	nand->badblockbits = 7;

 	mtd = nand_to_mtd(nand);

 	switch (fsmc_version) {
 	case FSMC_VER8:
 		nand->ecc.bytes = 13;
 		nand->ecc.strength = 8;
 		nand->ecc.correct = fsmc_bch8_correct_data;
 		nand->ecc.read_page = fsmc_read_page_hwecc;
 		if (mtd->writesize == 512)
 			nand->ecc.layout = &fsmc_ecc4_sp_layout;
 		else {
 			if (mtd->oobsize == 224)
 				nand->ecc.layout = &fsmc_ecc4_224_layout;
 			else
 				nand->ecc.layout = &fsmc_ecc4_lp_layout;
 		}

 		break;
 	default:
 		nand->ecc.bytes = 3;
 		nand->ecc.strength = 1;
 		nand->ecc.layout = &fsmc_ecc1_layout;
 		nand->ecc.correct = nand_correct_data;
 		break;
 	}

 	/* Detect NAND chips */
 	if (nand_scan_ident(mtd, CONFIG_SYS_MAX_NAND_DEVICE, NULL))
 		return -ENXIO;

 	if (nand_scan_tail(mtd))
 		return -ENXIO;

 	if (nand_register(chip_nr++, mtd))
 		return -ENXIO;

 	return 0;
 }
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* (C) Copyright 2010
	* Vipin Kumar, STMicroelectronics, vipin.kumar@st.com.
	*
	* (C) Copyright 2012
	* Amit Virdi, STMicroelectronics, amit.virdi@st.com.
	*/

	#include <common.h>
	#include <nand.h>
	#include <asm/io.h>
	#include <linux/bitops.h>
	#include <linux/err.h>
	#include <linux/mtd/nand_ecc.h>
	#include <linux/mtd/rawnand.h>
	#include <linux/mtd/fsmc_nand.h>
	#include <asm/arch/hardware.h>

	static u32 fsmc_version;
	static struct fsmc_regs const fsmc_regs_p = (struct fsmc_regs )
	CONFIG_SYS_FSMC_BASE;

	/*
	* ECC4 and ECC1 have 13 bytes and 3 bytes of ecc respectively for 512 bytes of
	* data. ECC4 can correct up to 8 bits in 512 bytes of data while ECC1 can
	* correct 1 bit in 512 bytes
	*/

	static struct nand_ecclayout fsmc_ecc4_lp_layout = {
	.eccbytes = 104,
	.eccpos = { 2, 3, 4, 5, 6, 7, 8,
	9, 10, 11, 12, 13, 14,
	18, 19, 20, 21, 22, 23, 24,
	25, 26, 27, 28, 29, 30,
	34, 35, 36, 37, 38, 39, 40,
	41, 42, 43, 44, 45, 46,
	50, 51, 52, 53, 54, 55, 56,
	57, 58, 59, 60, 61, 62,
	66, 67, 68, 69, 70, 71, 72,
	73, 74, 75, 76, 77, 78,
	82, 83, 84, 85, 86, 87, 88,
	89, 90, 91, 92, 93, 94,
	98, 99, 100, 101, 102, 103, 104,
	105, 106, 107, 108, 109, 110,
	114, 115, 116, 117, 118, 119, 120,
	121, 122, 123, 124, 125, 126
	},
	.oobfree = {
	{.offset = 15, .length = 3},
	{.offset = 31, .length = 3},
	{.offset = 47, .length = 3},
	{.offset = 63, .length = 3},
	{.offset = 79, .length = 3},
	{.offset = 95, .length = 3},
	{.offset = 111, .length = 3},
	{.offset = 127, .length = 1}
	}
	};

	/*
	* ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 224 bytes. 13*8 bytes
	* of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 118
	* bytes are free for use.
	*/
	static struct nand_ecclayout fsmc_ecc4_224_layout = {
	.eccbytes = 104,
	.eccpos = { 2, 3, 4, 5, 6, 7, 8,
	9, 10, 11, 12, 13, 14,
	18, 19, 20, 21, 22, 23, 24,
	25, 26, 27, 28, 29, 30,
	34, 35, 36, 37, 38, 39, 40,
	41, 42, 43, 44, 45, 46,
	50, 51, 52, 53, 54, 55, 56,
	57, 58, 59, 60, 61, 62,
	66, 67, 68, 69, 70, 71, 72,
	73, 74, 75, 76, 77, 78,
	82, 83, 84, 85, 86, 87, 88,
	89, 90, 91, 92, 93, 94,
	98, 99, 100, 101, 102, 103, 104,
	105, 106, 107, 108, 109, 110,
	114, 115, 116, 117, 118, 119, 120,
	121, 122, 123, 124, 125, 126
	},
	.oobfree = {
	{.offset = 15, .length = 3},
	{.offset = 31, .length = 3},
	{.offset = 47, .length = 3},
	{.offset = 63, .length = 3},
	{.offset = 79, .length = 3},
	{.offset = 95, .length = 3},
	{.offset = 111, .length = 3},
	{.offset = 127, .length = 97}
	}
	};

	/*
	* ECC placement definitions in oobfree type format
	* There are 13 bytes of ecc for every 512 byte block and it has to be read
	* consecutively and immediately after the 512 byte data block for hardware to
	* generate the error bit offsets in 512 byte data
	* Managing the ecc bytes in the following way makes it easier for software to
	* read ecc bytes consecutive to data bytes. This way is similar to
	* oobfree structure maintained already in u-boot nand driver
	*/
	static struct fsmc_eccplace fsmc_eccpl_lp = {
	.eccplace = {
	{.offset = 2, .length = 13},
	{.offset = 18, .length = 13},
	{.offset = 34, .length = 13},
	{.offset = 50, .length = 13},
	{.offset = 66, .length = 13},
	{.offset = 82, .length = 13},
	{.offset = 98, .length = 13},
	{.offset = 114, .length = 13}
	}
	};

	static struct nand_ecclayout fsmc_ecc4_sp_layout = {
	.eccbytes = 13,
	.eccpos = { 0, 1, 2, 3, 6, 7, 8,
	9, 10, 11, 12, 13, 14
	},
	.oobfree = {
	{.offset = 15, .length = 1},
	}
	};

	static struct fsmc_eccplace fsmc_eccpl_sp = {
	.eccplace = {
	{.offset = 0, .length = 4},
	{.offset = 6, .length = 9}
	}
	};

	static struct nand_ecclayout fsmc_ecc1_layout = {
	.eccbytes = 24,
	.eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52,
	66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116},
	.oobfree = {
	{.offset = 8, .length = 8},
	{.offset = 24, .length = 8},
	{.offset = 40, .length = 8},
	{.offset = 56, .length = 8},
	{.offset = 72, .length = 8},
	{.offset = 88, .length = 8},
	{.offset = 104, .length = 8},
	{.offset = 120, .length = 8}
	}
	};

	/* Count the number of 0's in buff upto a max of max_bits */
	static int count_written_bits(uint8_t *buff, int size, int max_bits)
	{
	int k, written_bits = 0;

	for (k = 0; k < size; k++) {
	written_bits += hweight8(~buff[k]);
	if (written_bits > max_bits)
	break;
	}

	return written_bits;
	}

	static void fsmc_nand_hwcontrol(struct mtd_info *mtd, int cmd, uint ctrl)
	{
	struct nand_chip *this = mtd_to_nand(mtd);
	ulong IO_ADDR_W;

	if (ctrl & NAND_CTRL_CHANGE) {
	IO_ADDR_W = (ulong)this->IO_ADDR_W;

	IO_ADDR_W &= ~(CONFIG_SYS_NAND_CLE \| CONFIG_SYS_NAND_ALE);
	if (ctrl & NAND_CLE)
	IO_ADDR_W \|= CONFIG_SYS_NAND_CLE;
	if (ctrl & NAND_ALE)
	IO_ADDR_W \|= CONFIG_SYS_NAND_ALE;

	if (ctrl & NAND_NCE) {
	writel(readl(&fsmc_regs_p->pc) \|
	FSMC_ENABLE, &fsmc_regs_p->pc);
	} else {
	writel(readl(&fsmc_regs_p->pc) &
	~FSMC_ENABLE, &fsmc_regs_p->pc);
	}
	this->IO_ADDR_W = (void *)IO_ADDR_W;
	}

	if (cmd != NAND_CMD_NONE)
	writeb(cmd, this->IO_ADDR_W);
	}

	static int fsmc_bch8_correct_data(struct mtd_info mtd, u_char dat,
	u_char read_ecc, u_char calc_ecc)
	{
	/* The calculated ecc is actually the correction index in data */
	u32 err_idx[8];
	u32 num_err, i;
	u32 ecc1, ecc2, ecc3, ecc4;

	num_err = (readl(&fsmc_regs_p->sts) >> 10) & 0xF;

	if (likely(num_err == 0))
	return 0;

	if (unlikely(num_err > 8)) {
	/*
	* This is a temporary erase check. A newly erased page read
	* would result in an ecc error because the oob data is also
	* erased to FF and the calculated ecc for an FF data is not
	* FF..FF.
	* This is a workaround to skip performing correction in case
	* data is FF..FF
	*
	* Logic:
	* For every page, each bit written as 0 is counted until these
	* number of bits are greater than 8 (the maximum correction
	* capability of FSMC for each 512 + 13 bytes)
	*/

	int bits_ecc = count_written_bits(read_ecc, 13, 8);
	int bits_data = count_written_bits(dat, 512, 8);

	if ((bits_ecc + bits_data) <= 8) {
	if (bits_data)
	memset(dat, 0xff, 512);
	return bits_data + bits_ecc;
	}

	return -EBADMSG;
	}

	ecc1 = readl(&fsmc_regs_p->ecc1);
	ecc2 = readl(&fsmc_regs_p->ecc2);
	ecc3 = readl(&fsmc_regs_p->ecc3);
	ecc4 = readl(&fsmc_regs_p->sts);

	err_idx[0] = (ecc1 >> 0) & 0x1FFF;
	err_idx[1] = (ecc1 >> 13) & 0x1FFF;
	err_idx[2] = (((ecc2 >> 0) & 0x7F) << 6) \| ((ecc1 >> 26) & 0x3F);
	err_idx[3] = (ecc2 >> 7) & 0x1FFF;
	err_idx[4] = (((ecc3 >> 0) & 0x1) << 12) \| ((ecc2 >> 20) & 0xFFF);
	err_idx[5] = (ecc3 >> 1) & 0x1FFF;
	err_idx[6] = (ecc3 >> 14) & 0x1FFF;
	err_idx[7] = (((ecc4 >> 16) & 0xFF) << 5) \| ((ecc3 >> 27) & 0x1F);

	i = 0;
	while (i < num_err) {
	err_idx[i] ^= 3;

	if (err_idx[i] < 512 * 8)
	__change_bit(err_idx[i], dat);

	i++;
	}

	return num_err;
	}

	static int fsmc_read_hwecc(struct mtd_info *mtd,
	const u_char data, u_char ecc)
	{
	u_int ecc_tmp;
	int timeout = CONFIG_SYS_HZ;
	ulong start;

	switch (fsmc_version) {
	case FSMC_VER8:
	start = get_timer(0);
	while (get_timer(start) < timeout) {
	/*
	* Busy waiting for ecc computation
	* to finish for 512 bytes
	*/
	if (readl(&fsmc_regs_p->sts) & FSMC_CODE_RDY)
	break;
	}

	ecc_tmp = readl(&fsmc_regs_p->ecc1);
	ecc[0] = (u_char) (ecc_tmp >> 0);
	ecc[1] = (u_char) (ecc_tmp >> 8);
	ecc[2] = (u_char) (ecc_tmp >> 16);
	ecc[3] = (u_char) (ecc_tmp >> 24);

	ecc_tmp = readl(&fsmc_regs_p->ecc2);
	ecc[4] = (u_char) (ecc_tmp >> 0);
	ecc[5] = (u_char) (ecc_tmp >> 8);
	ecc[6] = (u_char) (ecc_tmp >> 16);
	ecc[7] = (u_char) (ecc_tmp >> 24);

	ecc_tmp = readl(&fsmc_regs_p->ecc3);
	ecc[8] = (u_char) (ecc_tmp >> 0);
	ecc[9] = (u_char) (ecc_tmp >> 8);
	ecc[10] = (u_char) (ecc_tmp >> 16);
	ecc[11] = (u_char) (ecc_tmp >> 24);

	ecc_tmp = readl(&fsmc_regs_p->sts);
	ecc[12] = (u_char) (ecc_tmp >> 16);
	break;

	default:
	ecc_tmp = readl(&fsmc_regs_p->ecc1);
	ecc[0] = (u_char) (ecc_tmp >> 0);
	ecc[1] = (u_char) (ecc_tmp >> 8);
	ecc[2] = (u_char) (ecc_tmp >> 16);
	break;
	}

	return 0;
	}

	void fsmc_enable_hwecc(struct mtd_info *mtd, int mode)
	{
	writel(readl(&fsmc_regs_p->pc) & ~FSMC_ECCPLEN_256,
	&fsmc_regs_p->pc);
	writel(readl(&fsmc_regs_p->pc) & ~FSMC_ECCEN,
	&fsmc_regs_p->pc);
	writel(readl(&fsmc_regs_p->pc) \| FSMC_ECCEN,
	&fsmc_regs_p->pc);
	}

	/*
	* fsmc_read_page_hwecc
	* @mtd: mtd info structure
	* @chip: nand chip info structure
	* @buf: buffer to store read data
	* @oob_required: caller expects OOB data read to chip->oob_poi
	* @page: page number to read
	*
	* This routine is needed for fsmc verison 8 as reading from NAND chip has to be
	* performed in a strict sequence as follows:
	* data(512 byte) -> ecc(13 byte)
	* After this read, fsmc hardware generates and reports error data bits(upto a
	* max of 8 bits)
	*/
	static int fsmc_read_page_hwecc(struct mtd_info mtd, struct nand_chip chip,
	uint8_t *buf, int oob_required, int page)
	{
	struct fsmc_eccplace *fsmc_eccpl;
	int i, j, s, stat, eccsize = chip->ecc.size;
	int eccbytes = chip->ecc.bytes;
	int eccsteps = chip->ecc.steps;
	uint8_t *p = buf;
	uint8_t *ecc_calc = chip->buffers->ecccalc;
	uint8_t *ecc_code = chip->buffers->ecccode;
	int off, len, group = 0;
	uint8_t oob[13] __attribute__ ((aligned (2)));

	/* Differentiate between small and large page ecc place definitions */
	if (mtd->writesize == 512)
	fsmc_eccpl = &fsmc_eccpl_sp;
	else
	fsmc_eccpl = &fsmc_eccpl_lp;

	for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) {

	chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page);
	chip->ecc.hwctl(mtd, NAND_ECC_READ);
	chip->read_buf(mtd, p, eccsize);

	for (j = 0; j < eccbytes;) {
	off = fsmc_eccpl->eccplace[group].offset;
	len = fsmc_eccpl->eccplace[group].length;
	group++;

	/*
	* length is intentionally kept a higher multiple of 2
	* to read at least 13 bytes even in case of 16 bit NAND
	* devices
	*/
	if (chip->options & NAND_BUSWIDTH_16)
	len = roundup(len, 2);
	chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page);
	chip->read_buf(mtd, oob + j, len);
	j += len;
	}

	memcpy(&ecc_code[i], oob, 13);
	chip->ecc.calculate(mtd, p, &ecc_calc[i]);

	stat = chip->ecc.correct(mtd, p, &ecc_code[i],
	&ecc_calc[i]);
	if (stat < 0)
	mtd->ecc_stats.failed++;
	else
	mtd->ecc_stats.corrected += stat;
	}

	return 0;
	}

	int fsmc_nand_init(struct nand_chip *nand)
	{
	static int chip_nr;
	struct mtd_info *mtd;
	u32 peripid2 = readl(&fsmc_regs_p->peripid2);

	fsmc_version = (peripid2 >> FSMC_REVISION_SHFT) &
	FSMC_REVISION_MSK;

	writel(readl(&fsmc_regs_p->ctrl) \| FSMC_WP, &fsmc_regs_p->ctrl);

	#if defined(CONFIG_SYS_FSMC_NAND_16BIT)
	writel(FSMC_DEVWID_16 \| FSMC_DEVTYPE_NAND \| FSMC_ENABLE \| FSMC_WAITON,
	&fsmc_regs_p->pc);
	#elif defined(CONFIG_SYS_FSMC_NAND_8BIT)
	writel(FSMC_DEVWID_8 \| FSMC_DEVTYPE_NAND \| FSMC_ENABLE \| FSMC_WAITON,
	&fsmc_regs_p->pc);
	#else
	#error Please define CONFIG_SYS_FSMC_NAND_16BIT or CONFIG_SYS_FSMC_NAND_8BIT
	#endif
	writel(readl(&fsmc_regs_p->pc) \| FSMC_TCLR_1 \| FSMC_TAR_1,
	&fsmc_regs_p->pc);
	writel(FSMC_THIZ_1 \| FSMC_THOLD_4 \| FSMC_TWAIT_6 \| FSMC_TSET_0,
	&fsmc_regs_p->comm);
	writel(FSMC_THIZ_1 \| FSMC_THOLD_4 \| FSMC_TWAIT_6 \| FSMC_TSET_0,
	&fsmc_regs_p->attrib);

	nand->options = 0;
	#if defined(CONFIG_SYS_FSMC_NAND_16BIT)
	nand->options \|= NAND_BUSWIDTH_16;
	#endif
	nand->ecc.mode = NAND_ECC_HW;
	nand->ecc.size = 512;
	nand->ecc.calculate = fsmc_read_hwecc;
	nand->ecc.hwctl = fsmc_enable_hwecc;
	nand->cmd_ctrl = fsmc_nand_hwcontrol;
	nand->IO_ADDR_R = nand->IO_ADDR_W =
	(void __iomem *)CONFIG_SYS_NAND_BASE;
	nand->badblockbits = 7;

	mtd = nand_to_mtd(nand);

	switch (fsmc_version) {
	case FSMC_VER8:
	nand->ecc.bytes = 13;
	nand->ecc.strength = 8;
	nand->ecc.correct = fsmc_bch8_correct_data;
	nand->ecc.read_page = fsmc_read_page_hwecc;
	if (mtd->writesize == 512)
	nand->ecc.layout = &fsmc_ecc4_sp_layout;
	else {
	if (mtd->oobsize == 224)
	nand->ecc.layout = &fsmc_ecc4_224_layout;
	else
	nand->ecc.layout = &fsmc_ecc4_lp_layout;
	}

	break;
	default:
	nand->ecc.bytes = 3;
	nand->ecc.strength = 1;
	nand->ecc.layout = &fsmc_ecc1_layout;
	nand->ecc.correct = nand_correct_data;
	break;
	}

	/* Detect NAND chips */
	if (nand_scan_ident(mtd, CONFIG_SYS_MAX_NAND_DEVICE, NULL))
	return -ENXIO;

	if (nand_scan_tail(mtd))
	return -ENXIO;

	if (nand_register(chip_nr++, mtd))
	return -ENXIO;

	return 0;
	}