| CONFIG_ARM=y |
| CONFIG_ARCH_ROCKCHIP=y |
| CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| CONFIG_SYS_MALLOC_F_LEN=0x4000 |
| CONFIG_ROCKCHIP_RK3399=y |
| CONFIG_SPL_SPI_FLASH_SUPPORT=y |
| CONFIG_SPL_SPI_SUPPORT=y |
| CONFIG_SPL_STACK_R_ADDR=0x80000 |
| CONFIG_DEFAULT_DEVICE_TREE="rk3399-puma" |
| CONFIG_FIT=y |
| CONFIG_SPL_FIT=y |
| CONFIG_SPL_LOAD_FIT=y |
| CONFIG_SPL_FIT_SOURCE="board/rockchip/evb_rk3399/fit_spl_atf.its" |
| # CONFIG_DISPLAY_CPUINFO is not set |
| # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set |
| # CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set |
| CONFIG_SPL_STACK_R=y |
| CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 |
| CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 |
| CONFIG_CMD_BOOTZ=y |
| # CONFIG_CMD_IMLS is not set |
| CONFIG_CMD_GPT=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_SF=y |
| CONFIG_CMD_SPI=y |
| CONFIG_CMD_USB=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_CMD_TIME=y |
| CONFIG_SPL_OF_CONTROL=y |
| CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" |
| CONFIG_REGMAP=y |
| CONFIG_SPL_REGMAP=y |
| CONFIG_SYSCON=y |
| CONFIG_SPL_SYSCON=y |
| CONFIG_CLK=y |
| CONFIG_SPL_CLK=y |
| CONFIG_ROCKCHIP_GPIO=y |
| CONFIG_MMC_DW=y |
| CONFIG_MMC_DW_ROCKCHIP=y |
| CONFIG_MMC_SDHCI=y |
| CONFIG_MMC_SDHCI_ROCKCHIP=y |
| CONFIG_SPI_FLASH=y |
| CONFIG_SPI_FLASH_WINBOND=y |
| CONFIG_PHY_MICREL=y |
| CONFIG_PHY_MICREL_KSZ9031=y |
| CONFIG_DM_ETH=y |
| CONFIG_ETH_DESIGNWARE=y |
| CONFIG_GMAC_ROCKCHIP=y |
| CONFIG_PINCTRL=y |
| CONFIG_SPL_PINCTRL=y |
| CONFIG_ROCKCHIP_RK3399_PINCTRL=y |
| CONFIG_REGULATOR_PWM=y |
| CONFIG_DM_REGULATOR_FIXED=y |
| CONFIG_PWM_ROCKCHIP=y |
| CONFIG_RAM=y |
| CONFIG_SPL_RAM=y |
| CONFIG_BAUDRATE=115200 |
| CONFIG_DEBUG_UART=y |
| CONFIG_DEBUG_UART_BASE=0xFF180000 |
| CONFIG_DEBUG_UART_CLOCK=24000000 |
| CONFIG_DEBUG_UART_SHIFT=2 |
| CONFIG_SYS_NS16550=y |
| CONFIG_ROCKCHIP_SPI=y |
| CONFIG_SYSRESET=y |
| CONFIG_USB=y |
| CONFIG_USB_XHCI_HCD=y |
| CONFIG_USB_XHCI_DWC3=y |
| CONFIG_USB_EHCI_HCD=y |
| CONFIG_USB_EHCI_GENERIC=y |
| CONFIG_USB_STORAGE=y |
| CONFIG_ERRNO_STR=y |