include/configs/vexpress_aemv8a.h - filogic/uboot - Gitiles

 /*
  * Configuration for Versatile Express. Parts were derived from other ARM
  *   configurations.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef __VEXPRESS_AEMV8A_H
 #define __VEXPRESS_AEMV8A_H

 #ifdef CONFIG_BASE_FVP
 #ifndef CONFIG_SEMIHOSTING
 #error CONFIG_BASE_FVP requires CONFIG_SEMIHOSTING
 #endif
 #define CONFIG_BOARD_LATE_INIT
 #define CONFIG_ARMV8_SWITCH_TO_EL1
 #endif

 #define CONFIG_REMAKE_ELF

 #ifndef CONFIG_BASE_FVP
 /* Base FVP not using GICv3 yet */
 #define CONFIG_GICV3
 #endif

 /*#define CONFIG_ARMV8_SWITCH_TO_EL1*/

 /*#define CONFIG_SYS_GENERIC_BOARD*/

 #define CONFIG_SYS_NO_FLASH

 #define CONFIG_SUPPORT_RAW_INITRD

 /* Cache Definitions */
 #define CONFIG_SYS_DCACHE_OFF
 #define CONFIG_SYS_ICACHE_OFF

 #define CONFIG_IDENT_STRING		" vexpress_aemv8a"
 #define CONFIG_BOOTP_VCI_STRING		"U-boot.armv8.vexpress_aemv8a"

 /* Link Definitions */
 #ifdef CONFIG_BASE_FVP
 /* ATF loads u-boot here for BASE_FVP model */
 #define CONFIG_SYS_TEXT_BASE		0x88000000
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
 #else
 #define CONFIG_SYS_TEXT_BASE		0x80000000
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
 #endif

 /* Flat Device Tree Definitions */
 #define CONFIG_OF_LIBFDT

 #define CONFIG_DEFAULT_DEVICE_TREE	vexpress64

 /* SMP Spin Table Definitions */
 #ifdef CONFIG_BASE_FVP
 #define CPU_RELEASE_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x03f00000)
 #else
 #define CPU_RELEASE_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7fff0)
 #endif

 /* CS register bases for the original memory map. */
 #define V2M_PA_CS0			0x00000000
 #define V2M_PA_CS1			0x14000000
 #define V2M_PA_CS2			0x18000000
 #define V2M_PA_CS3			0x1c000000
 #define V2M_PA_CS4			0x0c000000
 #define V2M_PA_CS5			0x10000000

 #define V2M_PERIPH_OFFSET(x)		(x << 16)
 #define V2M_SYSREGS			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
 #define V2M_SYSCTL			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
 #define V2M_SERIAL_BUS_PCI		(V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))

 #define V2M_BASE			0x80000000

 /*
  * Physical addresses, offset from V2M_PA_CS0-3
  */
 #define V2M_NOR0			(V2M_PA_CS0)
 #define V2M_NOR1			(V2M_PA_CS4)
 #define V2M_SRAM			(V2M_PA_CS1)

 /* Common peripherals relative to CS7. */
 #define V2M_AACI			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
 #define V2M_MMCI			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
 #define V2M_KMI0			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
 #define V2M_KMI1			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))

 #define V2M_UART0			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
 #define V2M_UART1			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
 #define V2M_UART2			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
 #define V2M_UART3			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))

 #define V2M_WDT				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))

 #define V2M_TIMER01			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
 #define V2M_TIMER23			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))

 #define V2M_SERIAL_BUS_DVI		(V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
 #define V2M_RTC				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))

 #define V2M_CF				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))

 #define V2M_CLCD			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))

 /* System register offsets. */
 #define V2M_SYS_CFGDATA			(V2M_SYSREGS + 0x0a0)
 #define V2M_SYS_CFGCTRL			(V2M_SYSREGS + 0x0a4)
 #define V2M_SYS_CFGSTAT			(V2M_SYSREGS + 0x0a8)

 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY		(0x1800000)	/* 24MHz */

 /* Generic Interrupt Controller Definitions */
 #ifdef CONFIG_GICV3
 #define GICD_BASE			(0x2f000000)
 #define GICR_BASE			(0x2f100000)
 #else

 #ifdef CONFIG_BASE_FVP
 #define GICD_BASE			(0x2f000000)
 #define GICC_BASE			(0x2c000000)
 #else
 #define GICD_BASE			(0x2C001000)
 #define GICC_BASE			(0x2C002000)
 #endif
 #endif

 #define CONFIG_SYS_MEMTEST_START	V2M_BASE
 #define CONFIG_SYS_MEMTEST_END		(V2M_BASE + 0x80000000)

 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (8 << 20))

 /* SMSC91C111 Ethernet Configuration */
 #define CONFIG_SMC91111			1
 #define CONFIG_SMC91111_BASE		(0x01A000000)

 /* PL011 Serial Configuration */
 #define CONFIG_PL011_SERIAL
 #define CONFIG_PL011_CLOCK		24000000
 #define CONFIG_PL01x_PORTS		{(void *)CONFIG_SYS_SERIAL0, \
 					 (void *)CONFIG_SYS_SERIAL1}
 #define CONFIG_CONS_INDEX		0

 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_SERIAL0		V2M_UART0
 #define CONFIG_SYS_SERIAL1		V2M_UART1

 /* Command line configuration */
 #define CONFIG_MENU
 /*#define CONFIG_MENU_SHOW*/
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_BDI
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PXE
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_FLASH
 #define CONFIG_CMD_IMI
 #define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_RUN
 #define CONFIG_CMD_BOOTD
 #define CONFIG_CMD_ECHO
 #define CONFIG_CMD_SOURCE
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION

 /* BOOTP options */
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 #define CONFIG_BOOTP_PXE
 #define CONFIG_BOOTP_PXE_CLIENTARCH	0x100

 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR		(V2M_BASE + 0x10000000)

 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM_1			(V2M_BASE)	/* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE		0x80000000	/* 2048 MB */
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1

 /* Initial environment variables */
 #ifdef CONFIG_BASE_FVP
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 				"kernel_name=uImage\0"	\
 				"kernel_addr_r=0x80000000\0"	\
 				"initrd_name=ramdisk.img\0"	\
 				"initrd_addr_r=0x88000000\0"	\
 				"fdt_name=devtree.dtb\0"		\
 				"fdt_addr_r=0x83000000\0"		\
 				"fdt_high=0xffffffffffffffff\0"	\
 				"initrd_high=0xffffffffffffffff\0"

 #define CONFIG_BOOTARGS		"console=ttyAMA0 earlyprintk=pl011,"\
 				"0x1c090000 debug user_debug=31 "\
 				"loglevel=9"

 #define CONFIG_BOOTCOMMAND	"fdt addr $fdt_addr_r; fdt resize; " \
 				"fdt chosen $initrd_addr_r $initrd_end; " \
 				"bootm $kernel_addr_r - $fdt_addr_r"

 #define CONFIG_BOOTDELAY		1

 #else

 #define CONFIG_EXTRA_ENV_SETTINGS	\
 					"kernel_addr_r=0x80000000\0"	\
 					"initrd_addr_r=0x88000000\0"	\
 					"fdt_addr_r=0x83000000\0"		\
 					"fdt_high=0xa0000000\0"

 #define CONFIG_BOOTARGS			"console=ttyAMA0 root=/dev/ram0"
 #define CONFIG_BOOTCOMMAND		"bootm $kernel_addr_r " \
 					"$initrd_addr_r:$initrd_size $fdt_addr_r"
 #define CONFIG_BOOTDELAY		-1
 #endif

 /* Do not preserve environment */
 #define CONFIG_ENV_IS_NOWHERE		1
 #define CONFIG_ENV_SIZE			0x1000

 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
 #define CONFIG_SYS_PROMPT		"VExpress64# "
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_MAXARGS		64	/* max command args */

 #endif /* __VEXPRESS_AEMV8A_H */
	/*
	* Configuration for Versatile Express. Parts were derived from other ARM
	* configurations.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __VEXPRESS_AEMV8A_H
	#define __VEXPRESS_AEMV8A_H

	#ifdef CONFIG_BASE_FVP
	#ifndef CONFIG_SEMIHOSTING
	#error CONFIG_BASE_FVP requires CONFIG_SEMIHOSTING
	#endif
	#define CONFIG_BOARD_LATE_INIT
	#define CONFIG_ARMV8_SWITCH_TO_EL1
	#endif

	#define CONFIG_REMAKE_ELF

	#ifndef CONFIG_BASE_FVP
	/* Base FVP not using GICv3 yet */
	#define CONFIG_GICV3
	#endif

	/#define CONFIG_ARMV8_SWITCH_TO_EL1/

	/#define CONFIG_SYS_GENERIC_BOARD/

	#define CONFIG_SYS_NO_FLASH

	#define CONFIG_SUPPORT_RAW_INITRD

	/* Cache Definitions */
	#define CONFIG_SYS_DCACHE_OFF
	#define CONFIG_SYS_ICACHE_OFF

	#define CONFIG_IDENT_STRING " vexpress_aemv8a"
	#define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a"

	/* Link Definitions */
	#ifdef CONFIG_BASE_FVP
	/* ATF loads u-boot here for BASE_FVP model */
	#define CONFIG_SYS_TEXT_BASE 0x88000000
	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
	#else
	#define CONFIG_SYS_TEXT_BASE 0x80000000
	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
	#endif

	/* Flat Device Tree Definitions */
	#define CONFIG_OF_LIBFDT

	#define CONFIG_DEFAULT_DEVICE_TREE vexpress64

	/* SMP Spin Table Definitions */
	#ifdef CONFIG_BASE_FVP
	#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
	#else
	#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
	#endif

	/* CS register bases for the original memory map. */
	#define V2M_PA_CS0 0x00000000
	#define V2M_PA_CS1 0x14000000
	#define V2M_PA_CS2 0x18000000
	#define V2M_PA_CS3 0x1c000000
	#define V2M_PA_CS4 0x0c000000
	#define V2M_PA_CS5 0x10000000

	#define V2M_PERIPH_OFFSET(x) (x << 16)
	#define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
	#define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
	#define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))

	#define V2M_BASE 0x80000000

	/*
	* Physical addresses, offset from V2M_PA_CS0-3
	*/
	#define V2M_NOR0 (V2M_PA_CS0)
	#define V2M_NOR1 (V2M_PA_CS4)
	#define V2M_SRAM (V2M_PA_CS1)

	/* Common peripherals relative to CS7. */
	#define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
	#define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
	#define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
	#define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))

	#define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
	#define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
	#define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
	#define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))

	#define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))

	#define V2M_TIMER01 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
	#define V2M_TIMER23 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))

	#define V2M_SERIAL_BUS_DVI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
	#define V2M_RTC (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))

	#define V2M_CF (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))

	#define V2M_CLCD (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))

	/* System register offsets. */
	#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
	#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
	#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)

	/* Generic Timer Definitions */
	#define COUNTER_FREQUENCY (0x1800000) /* 24MHz */

	/* Generic Interrupt Controller Definitions */
	#ifdef CONFIG_GICV3
	#define GICD_BASE (0x2f000000)
	#define GICR_BASE (0x2f100000)
	#else

	#ifdef CONFIG_BASE_FVP
	#define GICD_BASE (0x2f000000)
	#define GICC_BASE (0x2c000000)
	#else
	#define GICD_BASE (0x2C001000)
	#define GICC_BASE (0x2C002000)
	#endif
	#endif

	#define CONFIG_SYS_MEMTEST_START V2M_BASE
	#define CONFIG_SYS_MEMTEST_END (V2M_BASE + 0x80000000)

	/* Size of malloc() pool */
	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 << 20))

	/* SMSC91C111 Ethernet Configuration */
	#define CONFIG_SMC91111 1
	#define CONFIG_SMC91111_BASE (0x01A000000)

	/* PL011 Serial Configuration */
	#define CONFIG_PL011_SERIAL
	#define CONFIG_PL011_CLOCK 24000000
	#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
	(void *)CONFIG_SYS_SERIAL1}
	#define CONFIG_CONS_INDEX 0

	#define CONFIG_BAUDRATE 115200
	#define CONFIG_SYS_SERIAL0 V2M_UART0
	#define CONFIG_SYS_SERIAL1 V2M_UART1

	/* Command line configuration */
	#define CONFIG_MENU
	/#define CONFIG_MENU_SHOW/
	#define CONFIG_CMD_CACHE
	#define CONFIG_CMD_BDI
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_PXE
	#define CONFIG_CMD_ENV
	#define CONFIG_CMD_FLASH
	#define CONFIG_CMD_IMI
	#define CONFIG_CMD_MEMORY
	#define CONFIG_CMD_MII
	#define CONFIG_CMD_NET
	#define CONFIG_CMD_PING
	#define CONFIG_CMD_SAVEENV
	#define CONFIG_CMD_RUN
	#define CONFIG_CMD_BOOTD
	#define CONFIG_CMD_ECHO
	#define CONFIG_CMD_SOURCE
	#define CONFIG_CMD_FAT
	#define CONFIG_DOS_PARTITION

	/* BOOTP options */
	#define CONFIG_BOOTP_BOOTFILESIZE
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME
	#define CONFIG_BOOTP_PXE
	#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100

	/* Miscellaneous configurable options */
	#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x10000000)

	/* Physical Memory Map */
	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
	#define PHYS_SDRAM_1_SIZE 0x80000000 /* 2048 MB */
	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1

	/* Initial environment variables */
	#ifdef CONFIG_BASE_FVP
	#define CONFIG_EXTRA_ENV_SETTINGS \
	"kernel_name=uImage\0" \
	"kernel_addr_r=0x80000000\0" \
	"initrd_name=ramdisk.img\0" \
	"initrd_addr_r=0x88000000\0" \
	"fdt_name=devtree.dtb\0" \
	"fdt_addr_r=0x83000000\0" \
	"fdt_high=0xffffffffffffffff\0" \
	"initrd_high=0xffffffffffffffff\0"

	#define CONFIG_BOOTARGS "console=ttyAMA0 earlyprintk=pl011,"\
	"0x1c090000 debug user_debug=31 "\
	"loglevel=9"

	#define CONFIG_BOOTCOMMAND "fdt addr $fdt_addr_r; fdt resize; " \
	"fdt chosen $initrd_addr_r $initrd_end; " \
	"bootm $kernel_addr_r - $fdt_addr_r"

	#define CONFIG_BOOTDELAY 1

	#else

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"kernel_addr_r=0x80000000\0" \
	"initrd_addr_r=0x88000000\0" \
	"fdt_addr_r=0x83000000\0" \
	"fdt_high=0xa0000000\0"

	#define CONFIG_BOOTARGS "console=ttyAMA0 root=/dev/ram0"
	#define CONFIG_BOOTCOMMAND "bootm $kernel_addr_r " \
	"$initrd_addr_r:$initrd_size $fdt_addr_r"
	#define CONFIG_BOOTDELAY -1
	#endif

	/* Do not preserve environment */
	#define CONFIG_ENV_IS_NOWHERE 1
	#define CONFIG_ENV_SIZE 0x1000

	/* Monitor Command Prompt */
	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
	#define CONFIG_SYS_PROMPT "VExpress64# "
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	sizeof(CONFIG_SYS_PROMPT) + 16)
	#define CONFIG_SYS_HUSH_PARSER
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	#define CONFIG_SYS_LONGHELP
	#define CONFIG_CMDLINE_EDITING
	#define CONFIG_SYS_MAXARGS 64 /* max command args */

	#endif /* __VEXPRESS_AEMV8A_H */