Merge branch 'next' of /home/wd/git/u-boot/next
Conflicts:
include/ppc4xx.h
Signed-off-by: Wolfgang Denk <wd@denx.de>
diff --git a/Makefile b/Makefile
index 84947d0..8df60fa 100644
--- a/Makefile
+++ b/Makefile
@@ -24,7 +24,7 @@
VERSION = 2010
PATCHLEVEL = 09
SUBLEVEL =
-EXTRAVERSION = -rc2
+EXTRAVERSION =
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
diff --git a/README b/README
index feb51ab..171e0d6 100644
--- a/README
+++ b/README
@@ -126,13 +126,17 @@
Versioning:
===========
-U-Boot uses a 3 level version number containing a version, a
-sub-version, and a patchlevel: "U-Boot-2.34.5" means version "2",
-sub-version "34", and patchlevel "4".
+Starting with the release in October 2008, the names of the releases
+were changed from numerical release numbers without deeper meaning
+into a time stamp based numbering. Regular releases are identified by
+names consisting of the calendar year and month of the release date.
+Additional fields (if present) indicate release candidates or bug fix
+releases in "stable" maintenance trees.
-The patchlevel is used to indicate certain stages of development
-between released versions, i. e. officially released versions of
-U-Boot will always have a patchlevel of "0".
+Examples:
+ U-Boot v2009.11 - Release November 2009
+ U-Boot v2009.11.1 - Release 1 in version November 2009 stable tree
+ U-Boot v2010.09-rc1 - Release candiate 1 for September 2010 release
Directory Hierarchy:
diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c
index 195be6e..8c1f395 100644
--- a/arch/arm/cpu/armv7/omap4/board.c
+++ b/arch/arm/cpu/armv7/omap4/board.c
@@ -30,6 +30,7 @@
#include <common.h>
#include <asm/arch/cpu.h>
#include <asm/arch/sys_proto.h>
+#include <asm/sizes.h>
/*
* Routine: s_init
@@ -66,6 +67,33 @@
writel(WD_UNLOCK2, &wd2_base->wspr);
}
+
+/*
+ * This function finds the SDRAM size available in the system
+ * based on DMM section configurations
+ * This is needed because the size of memory installed may be
+ * different on different versions of the board
+ */
+u32 sdram_size(void)
+{
+ u32 section, i, total_size = 0, size, addr;
+ for (i = 0; i < 4; i++) {
+ section = __raw_readl(DMM_LISA_MAP_BASE + i*4);
+ addr = section & DMM_LISA_MAP_SYS_ADDR_MASK;
+ /* See if the address is valid */
+ if ((addr >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
+ (addr < OMAP44XX_DRAM_ADDR_SPACE_END)) {
+ size = ((section & DMM_LISA_MAP_SYS_SIZE_MASK) >>
+ DMM_LISA_MAP_SYS_SIZE_SHIFT);
+ size = 1 << size;
+ size *= SZ_16M;
+ total_size += size;
+ }
+ }
+ return total_size;
+}
+
+
/*
* Routine: dram_init
* Description: sets uboots idea of sdram size
@@ -75,7 +103,7 @@
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_dram[0].start = 0x80000000;
- gd->bd->bi_dram[0].size = 512 << 20;
+ gd->bd->bi_dram[0].size = sdram_size();
return 0;
}
diff --git a/arch/arm/cpu/ixp/npe/IxNpeDlNpeMgr.c b/arch/arm/cpu/ixp/npe/IxNpeDlNpeMgr.c
index f5a4c5f..a9ea8bc 100644
--- a/arch/arm/cpu/ixp/npe/IxNpeDlNpeMgr.c
+++ b/arch/arm/cpu/ixp/npe/IxNpeDlNpeMgr.c
@@ -51,11 +51,6 @@
/*
* Put the user defined include files required.
*/
-
-
-/*
- * Put the user defined include files required.
- */
#include "IxOsal.h"
#include "IxNpeDl.h"
#include "IxNpeDlNpeMgr_p.h"
diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap4.h
index d0c808d..a30bb33 100644
--- a/arch/arm/include/asm/arch-omap4/omap4.h
+++ b/arch/arm/include/asm/arch-omap4/omap4.h
@@ -42,6 +42,10 @@
#define OMAP44XX_L4_WKUP_BASE 0x4A300000
#define OMAP44XX_L4_PER_BASE 0x48000000
+#define OMAP44XX_DRAM_ADDR_SPACE_START 0x80000000
+#define OMAP44XX_DRAM_ADDR_SPACE_END 0xD0000000
+
+
/* CONTROL */
#define CTRL_BASE (OMAP44XX_L4_CORE_BASE + 0x2000)
#define CONTROL_PADCONF_CORE (OMAP44XX_L4_CORE_BASE + 0x100000)
@@ -66,6 +70,12 @@
/* GPMC */
#define OMAP44XX_GPMC_BASE 0x50000000
+/* DMM */
+#define OMAP44XX_DMM_BASE 0x4E000000
+#define DMM_LISA_MAP_BASE (OMAP44XX_DMM_BASE + 0x40)
+#define DMM_LISA_MAP_SYS_SIZE_MASK (7 << 20)
+#define DMM_LISA_MAP_SYS_SIZE_SHIFT 20
+#define DMM_LISA_MAP_SYS_ADDR_MASK (0xFF << 24)
/*
* Hardware Register Details
*/
diff --git a/arch/blackfin/include/asm/config-pre.h b/arch/blackfin/include/asm/config-pre.h
index 4531519..4ce67d4 100644
--- a/arch/blackfin/include/asm/config-pre.h
+++ b/arch/blackfin/include/asm/config-pre.h
@@ -71,6 +71,9 @@
# define BFIN_BOOT_SPI_SSEL 1
#endif
+/* Define to get a GPIO CS with the Blackfin SPI controller */
+#define MAX_CTRL_CS 8
+
/* There is no Blackfin/NetBSD port */
#undef CONFIG_BOOTM_NETBSD
diff --git a/arch/blackfin/lib/Makefile b/arch/blackfin/lib/Makefile
index 3bdba75..a18bbd6 100644
--- a/arch/blackfin/lib/Makefile
+++ b/arch/blackfin/lib/Makefile
@@ -46,7 +46,7 @@
COBJS-$(CONFIG_CMD_CACHE_DUMP) += cmd_cache_dump.o
COBJS-$(CONFIG_CMD_KGDB) += kgdb.o
COBJS-y += muldi3.o
-COBJS-$(CONFIG_POST) += post.o tests.o
+COBJS-$(CONFIG_POST_ALT_LIST) += tests.o
COBJS-y += string.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c
index 46e36c8..7643250 100644
--- a/arch/blackfin/lib/board.c
+++ b/arch/blackfin/lib/board.c
@@ -322,7 +322,6 @@
#if defined(CONFIG_POST)
post_output_backlog();
- post_reloc();
#endif
/* initialize malloc() area */
diff --git a/arch/blackfin/lib/post.c b/arch/blackfin/lib/post.c
deleted file mode 100644
index bd6aaf5..0000000
--- a/arch/blackfin/lib/post.c
+++ /dev/null
@@ -1,421 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <stdio_dev.h>
-#include <watchdog.h>
-#include <post.h>
-
-#ifdef CONFIG_LOGBUFFER
-#include <logbuff.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define POST_MAX_NUMBER 32
-
-#define BOOTMODE_MAGIC 0xDEAD0000
-
-int post_init_f(void)
-{
- int res = 0;
- unsigned int i;
-
- for (i = 0; i < post_list_size; i++) {
- struct post_test *test = post_list + i;
-
- if (test->init_f && test->init_f()) {
- res = -1;
- }
- }
-
- gd->post_init_f_time = post_time_ms(0);
- if (!gd->post_init_f_time) {
- printf
- ("post/post.c: post_time_ms seems not to be implemented\n");
- }
-
- return res;
-}
-
-void post_bootmode_init(void)
-{
- int bootmode = post_bootmode_get(0);
- int newword;
-
- if (post_hotkeys_pressed() && !(bootmode & POST_POWERTEST)) {
- newword = BOOTMODE_MAGIC | POST_SLOWTEST;
- } else if (bootmode == 0) {
- newword = BOOTMODE_MAGIC | POST_POWERON;
- } else if (bootmode == POST_POWERON || bootmode == POST_SLOWTEST) {
- newword = BOOTMODE_MAGIC | POST_NORMAL;
- } else {
- /* Use old value */
- newword = post_word_load() & ~POST_COLDBOOT;
- }
-
- if (bootmode == 0) {
- /* We are booting after power-on */
- newword |= POST_COLDBOOT;
- }
-
- post_word_store(newword);
-
- /* Reset activity record */
- gd->post_log_word = 0;
-}
-
-int post_bootmode_get(unsigned int *last_test)
-{
- unsigned long word = post_word_load();
- int bootmode;
-
- if ((word & 0xFFFF0000) != BOOTMODE_MAGIC) {
- return 0;
- }
-
- bootmode = word & 0x7F;
-
- if (last_test && (bootmode & POST_POWERTEST)) {
- *last_test = (word >> 8) & 0xFF;
- }
-
- return bootmode;
-}
-
-/* POST tests run before relocation only mark status bits .... */
-static void post_log_mark_start(unsigned long testid)
-{
- gd->post_log_word |= (testid) << 16;
-}
-
-static void post_log_mark_succ(unsigned long testid)
-{
- gd->post_log_word |= testid;
-}
-
-/* ... and the messages are output once we are relocated */
-void post_output_backlog(void)
-{
- int j;
-
- for (j = 0; j < post_list_size; j++) {
- if (gd->post_log_word & (post_list[j].testid << 16)) {
- post_log("POST %s ", post_list[j].cmd);
- if (gd->post_log_word & post_list[j].testid)
- post_log("PASSED\n");
- else {
- post_log("FAILED\n");
- show_boot_progress (-31);
- }
- }
- }
-}
-
-static void post_bootmode_test_on(unsigned int last_test)
-{
- unsigned long word = post_word_load();
-
- word |= POST_POWERTEST;
-
- word |= (last_test & 0xFF) << 8;
-
- post_word_store(word);
-}
-
-static void post_bootmode_test_off(void)
-{
- unsigned long word = post_word_load();
-
- word &= ~POST_POWERTEST;
-
- post_word_store(word);
-}
-
-static void post_get_flags(int *test_flags)
-{
- int flag[] = { POST_POWERON, POST_NORMAL, POST_SLOWTEST };
- char *var[] = { "post_poweron", "post_normal", "post_slowtest" };
- int varnum = sizeof(var) / sizeof(var[0]);
- char list[128]; /* long enough for POST list */
- char *name;
- char *s;
- int last;
- int i, j;
-
- for (j = 0; j < post_list_size; j++) {
- test_flags[j] = post_list[j].flags;
- }
-
- for (i = 0; i < varnum; i++) {
- if (getenv_f(var[i], list, sizeof(list)) <= 0)
- continue;
-
- for (j = 0; j < post_list_size; j++) {
- test_flags[j] &= ~flag[i];
- }
-
- last = 0;
- name = list;
- while (!last) {
- while (*name && *name == ' ')
- name++;
- if (*name == 0)
- break;
- s = name + 1;
- while (*s && *s != ' ')
- s++;
- if (*s == 0)
- last = 1;
- else
- *s = 0;
-
- for (j = 0; j < post_list_size; j++) {
- if (strcmp(post_list[j].cmd, name) == 0) {
- test_flags[j] |= flag[i];
- break;
- }
- }
-
- if (j == post_list_size) {
- printf("No such test: %s\n", name);
- }
-
- name = s + 1;
- }
- }
-
- for (j = 0; j < post_list_size; j++) {
- if (test_flags[j] & POST_POWERON) {
- test_flags[j] |= POST_SLOWTEST;
- }
- }
-}
-
-static int post_run_single(struct post_test *test,
- int test_flags, int flags, unsigned int i)
-{
- if ((flags & test_flags & POST_ALWAYS) &&
- (flags & test_flags & POST_MEM)) {
- WATCHDOG_RESET();
-
- if (!(flags & POST_REBOOT)) {
- if ((test_flags & POST_REBOOT)
- && !(flags & POST_MANUAL)) {
- post_bootmode_test_on(i);
- }
-
- if (test_flags & POST_PREREL)
- post_log_mark_start(test->testid);
- else
- post_log("POST %s ", test->cmd);
- }
-
- if (test_flags & POST_PREREL) {
- if ((*test->test) (flags) == 0)
- post_log_mark_succ(test->testid);
- } else {
- if ((*test->test) (flags) != 0) {
- post_log("FAILED\n");
- show_boot_progress (-32);
- } else
- post_log("PASSED\n");
- }
-
- if ((test_flags & POST_REBOOT) && !(flags & POST_MANUAL)) {
- post_bootmode_test_off();
- }
-
- return 0;
- } else {
- return -1;
- }
-}
-
-int post_run(char *name, int flags)
-{
- unsigned int i;
- int test_flags[POST_MAX_NUMBER];
-
- post_get_flags(test_flags);
-
- if (name == NULL) {
- unsigned int last;
-
- if (post_bootmode_get(&last) & POST_POWERTEST) {
- if (last < post_list_size &&
- (flags & test_flags[last] & POST_ALWAYS) &&
- (flags & test_flags[last] & POST_MEM)) {
-
- post_run_single(post_list + last,
- test_flags[last],
- flags | POST_REBOOT, last);
-
- for (i = last + 1; i < post_list_size; i++) {
- post_run_single(post_list + i,
- test_flags[i],
- flags, i);
- }
- }
- } else {
- for (i = 0; i < post_list_size; i++) {
- post_run_single(post_list + i,
- test_flags[i], flags, i);
- }
- }
-
- return 0;
- } else {
- for (i = 0; i < post_list_size; i++) {
- if (strcmp(post_list[i].cmd, name) == 0)
- break;
- }
-
- if (i < post_list_size) {
- return post_run_single(post_list + i,
- test_flags[i], flags, i);
- } else {
- return -1;
- }
- }
-}
-
-static int post_info_single(struct post_test *test, int full)
-{
- if (test->flags & POST_MANUAL) {
- if (full)
- printf("%s - %s\n"
- " %s\n", test->cmd, test->name, test->desc);
- else
- printf(" %-15s - %s\n", test->cmd, test->name);
-
- return 0;
- } else {
- return -1;
- }
-}
-
-int post_info(char *name)
-{
- unsigned int i;
-
- if (name == NULL) {
- for (i = 0; i < post_list_size; i++) {
- post_info_single(post_list + i, 0);
- }
-
- return 0;
- } else {
- for (i = 0; i < post_list_size; i++) {
- if (strcmp(post_list[i].cmd, name) == 0)
- break;
- }
-
- if (i < post_list_size) {
- return post_info_single(post_list + i, 1);
- } else {
- return -1;
- }
- }
-}
-
-int post_log(char *format, ...)
-{
- va_list args;
- uint i;
- char printbuffer[CONFIG_SYS_PBSIZE];
-
- va_start(args, format);
-
- /* For this to work, printbuffer must be larger than
- * anything we ever want to print.
- */
- i = vsprintf(printbuffer, format, args);
- va_end(args);
-
-#ifdef CONFIG_LOGBUFFER
- /* Send to the logbuffer */
- logbuff_log(printbuffer);
-#else
- /* Send to the stdout file */
- puts(printbuffer);
-#endif
-
- return 0;
-}
-
-void post_reloc(void)
-{
- unsigned int i;
-
- /*
- * We have to relocate the test table manually
- */
- for (i = 0; i < post_list_size; i++) {
- ulong addr;
- struct post_test *test = post_list + i;
-
- if (test->name) {
- addr = (ulong) (test->name) + gd->reloc_off;
- test->name = (char *)addr;
- }
-
- if (test->cmd) {
- addr = (ulong) (test->cmd) + gd->reloc_off;
- test->cmd = (char *)addr;
- }
-
- if (test->desc) {
- addr = (ulong) (test->desc) + gd->reloc_off;
- test->desc = (char *)addr;
- }
-
- if (test->test) {
- addr = (ulong) (test->test) + gd->reloc_off;
- test->test = (int (*)(int flags))addr;
- }
-
- if (test->init_f) {
- addr = (ulong) (test->init_f) + gd->reloc_off;
- test->init_f = (int (*)(void))addr;
- }
-
- if (test->reloc) {
- addr = (ulong) (test->reloc) + gd->reloc_off;
- test->reloc = (void (*)(void))addr;
-
- test->reloc();
- }
- }
-}
-
-/*
- * Some tests (e.g. SYSMON) need the time when post_init_f started,
- * but we cannot use get_timer() at this point.
- *
- * On PowerPC we implement it using the timebase register.
- */
-unsigned long post_time_ms(unsigned long base)
-{
- return (unsigned long)get_ticks() / (get_tbclk() / CONFIG_SYS_HZ) - base;
-}
diff --git a/arch/powerpc/cpu/mpc512x/Makefile b/arch/powerpc/cpu/mpc512x/Makefile
index d1b6946..37b06f3 100644
--- a/arch/powerpc/cpu/mpc512x/Makefile
+++ b/arch/powerpc/cpu/mpc512x/Makefile
@@ -29,7 +29,6 @@
START = start.o
COBJS-y := cpu.o
COBJS-y += traps.o
-COBJS-y += common.o
COBJS-y += cpu_init.o
COBJS-y += fixed_sdram.o
COBJS-y += i2c.o
diff --git a/arch/powerpc/cpu/mpc512x/common.c b/arch/powerpc/cpu/mpc512x/common.c
deleted file mode 100644
index 180d323..0000000
--- a/arch/powerpc/cpu/mpc512x/common.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include <common.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-#if defined(CONFIG_SYS_POST_WORD_ADDR)
-# define _POST_ADDR (CONFIG_SYS_POST_WORD_ADDR)
-#else
-#error echo "No POST word address defined"
-#endif
-
-void post_word_store(ulong a)
-{
- volatile void *save_addr = (volatile void *)(_POST_ADDR);
-
- out_be32(save_addr, a);
-}
-
-ulong post_word_load(void)
-{
- volatile void *save_addr = (volatile void *)(_POST_ADDR);
-
- return in_be32(save_addr);
-}
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER */
diff --git a/arch/powerpc/cpu/mpc8260/commproc.c b/arch/powerpc/cpu/mpc8260/commproc.c
index c522bc5..082957e 100644
--- a/arch/powerpc/cpu/mpc8260/commproc.c
+++ b/arch/powerpc/cpu/mpc8260/commproc.c
@@ -175,23 +175,3 @@
else
*bp |= CPM_BRG_EXTC_CLK5_15;
}
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-void post_word_store (ulong a)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
- *save_addr = a;
-}
-
-ulong post_word_load (void)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
- return *save_addr;
-}
-
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
diff --git a/arch/powerpc/cpu/mpc85xx/commproc.c b/arch/powerpc/cpu/mpc85xx/commproc.c
index f0fd1cb..292b723 100644
--- a/arch/powerpc/cpu/mpc85xx/commproc.c
+++ b/arch/powerpc/cpu/mpc85xx/commproc.c
@@ -183,23 +183,3 @@
else
*bp |= CPM_BRG_EXTC_CLK5_15;
}
-
-#ifdef CONFIG_POST
-
-void post_word_store (ulong a)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
- *save_addr = a;
-}
-
-ulong post_word_load (void)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
- return *save_addr;
-}
-
-#endif /* CONFIG_POST */
diff --git a/arch/powerpc/cpu/mpc8xx/commproc.c b/arch/powerpc/cpu/mpc8xx/commproc.c
index 2c85377..5fe01ff 100644
--- a/arch/powerpc/cpu/mpc8xx/commproc.c
+++ b/arch/powerpc/cpu/mpc8xx/commproc.c
@@ -83,23 +83,3 @@
return (gd->dp_alloc_base + mask) & ~mask;
}
#endif /* CONFIG_SYS_ALLOC_DPRAM */
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-void post_word_store (ulong a)
-{
- volatile void *save_addr =
- ((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR;
-
- *(volatile ulong *) save_addr = a;
-}
-
-ulong post_word_load (void)
-{
- volatile void *save_addr =
- ((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR;
-
- return *(volatile ulong *) save_addr;
-}
-
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
diff --git a/arch/powerpc/cpu/ppc4xx/Makefile b/arch/powerpc/cpu/ppc4xx/Makefile
index c9c1a33..fa8d10c 100644
--- a/arch/powerpc/cpu/ppc4xx/Makefile
+++ b/arch/powerpc/cpu/ppc4xx/Makefile
@@ -45,7 +45,6 @@
ifdef CONFIG_CMD_CHIP_CONFIG
COBJS += cmd_chip_config.o
endif
-COBJS += commproc.o
COBJS += cpu.o
COBJS += cpu_init.o
COBJS += denali_data_eye.o
diff --git a/arch/powerpc/cpu/ppc4xx/commproc.c b/arch/powerpc/cpu/ppc4xx/commproc.c
deleted file mode 100644
index 6bf95e6..0000000
--- a/arch/powerpc/cpu/ppc4xx/commproc.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- *
- * Atapted for ppc4XX by Denis Peter
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-#if defined(CONFIG_SYS_POST_WORD_ADDR)
-# define _POST_ADDR ((CONFIG_SYS_OCM_DATA_ADDR) + (CONFIG_SYS_POST_WORD_ADDR))
-#elif defined(CONFIG_SYS_POST_ALT_WORD_ADDR)
-# define _POST_ADDR (CONFIG_SYS_POST_ALT_WORD_ADDR)
-#endif
-
-void post_word_store (ulong a)
-{
- volatile void *save_addr = (volatile void *)(_POST_ADDR);
-
- out_be32(save_addr, a);
-}
-
-ulong post_word_load (void)
-{
- volatile void *save_addr = (volatile void *)(_POST_ADDR);
-
- return in_be32(save_addr);
-}
-
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
diff --git a/arch/powerpc/cpu/ppc4xx/fdt.c b/arch/powerpc/cpu/ppc4xx/fdt.c
index 90c7e19..5ddb880 100644
--- a/arch/powerpc/cpu/ppc4xx/fdt.c
+++ b/arch/powerpc/cpu/ppc4xx/fdt.c
@@ -59,14 +59,14 @@
*p++ = 0;
*p++ = bxcr & EBC_BXCR_BAS_MASK;
*p++ = EBC_BXCR_BANK_SIZE(bxcr);
+ }
+ }
+
#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
- /* Try to update reg property in nor flash node too */
- fdt_fixup_nor_flash_size(blob, i,
- EBC_BXCR_BANK_SIZE(bxcr));
+ /* Update reg property in all nor flash nodes too */
+ fdt_fixup_nor_flash_size(blob);
#endif
- }
- }
/* Some 405 PPC's have EBC as direct PLB child in the dts */
if (fdt_path_offset(blob, ebc_path) < 0)
diff --git a/board/amcc/ebony/flash.c b/board/amcc/ebony/flash.c
index 94eeee2..df7716c 100644
--- a/board/amcc/ebony/flash.c
+++ b/board/amcc/ebony/flash.c
@@ -34,6 +34,7 @@
#include <common.h>
#include <asm/ppc4xx.h>
#include <asm/processor.h>
+#include <asm/io.h>
#undef DEBUG
#ifdef DEBUG
@@ -71,6 +72,36 @@
*/
static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+/*
+ * Override the weak default mapping function with a board specific one
+ */
+u32 flash_get_bank_size(int cs, int idx)
+{
+ u8 reg = in_8((void *)CONFIG_SYS_FPGA_BASE);
+
+ if ((reg & BOOT_SMALL_FLASH) && !(reg & FLASH_ONBD_N)) {
+ /*
+ * cs0: small flash (512KiB)
+ * cs2: 2 * big flash (2 * 2MiB)
+ */
+ if (cs == 0)
+ return flash_info[2].size;
+ if (cs == 2)
+ return flash_info[0].size + flash_info[1].size;
+ } else {
+ /*
+ * cs0: 2 * big flash (2 * 2MiB)
+ * cs2: small flash (512KiB)
+ */
+ if (cs == 0)
+ return flash_info[0].size + flash_info[1].size;
+ if (cs == 2)
+ return flash_info[2].size;
+ }
+
+ return 0;
+}
+
unsigned long flash_init(void)
{
unsigned long total_b = 0;
diff --git a/board/barco/barco.c b/board/barco/barco.c
index 6ce3480..263a288 100644
--- a/board/barco/barco.c
+++ b/board/barco/barco.c
@@ -342,12 +342,3 @@
{
return 0;
}
-
-unsigned long post_word_load (void)
-{
- return 0l;
-}
-void post_word_store (unsigned long val)
-{
- return;
-}
diff --git a/board/bc3450/bc3450.c b/board/bc3450/bc3450.c
index 3117b5f..97fb5a4 100644
--- a/board/bc3450/bc3450.c
+++ b/board/bc3450/bc3450.c
@@ -290,26 +290,6 @@
}
#endif
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-void post_word_store (ulong a)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
-
- *save_addr = a;
-}
-
-ulong post_word_load (void)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
-
- return *save_addr;
-}
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
-
-
#ifdef CONFIG_BOARD_EARLY_INIT_R
int board_early_init_r (void)
{
diff --git a/board/bf527-ad7160-eval/config.mk b/board/bf527-ad7160-eval/config.mk
index f85bef5..3f9d41f 100644
--- a/board/bf527-ad7160-eval/config.mk
+++ b/board/bf527-ad7160-eval/config.mk
@@ -26,8 +26,8 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-CFLAGS_lib_generic += -O2
-CFLAGS_lzma += -O2
+CFLAGS_lib += -O2
+CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile
index 4f8985b..47bf905 100644
--- a/board/bf537-stamp/Makefile
+++ b/board/bf537-stamp/Makefile
@@ -31,7 +31,7 @@
COBJS-y := $(BOARD).o
COBJS-$(CONFIG_BFIN_IDE) += ide-cf.o
-COBJS-$(CONFIG_POST) += post.o post-memory.o
+COBJS-$(CONFIG_HAS_POST) += post.o post-memory.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
diff --git a/board/bf537-stamp/post.c b/board/bf537-stamp/post.c
index 4e844ba..c546ab6 100644
--- a/board/bf537-stamp/post.c
+++ b/board/bf537-stamp/post.c
@@ -13,8 +13,6 @@
#include <command.h>
#include <asm/blackfin.h>
-#define POST_WORD_ADDR 0xFF903FFC
-
/* Using sw10-PF5 as the hotkey */
int post_hotkeys_pressed(void)
{
@@ -47,18 +45,6 @@
}
}
-void post_word_store(ulong a)
-{
- volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
- *save_addr = a;
-}
-
-ulong post_word_load(void)
-{
- volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
- return *save_addr;
-}
-
int uart_post_test(int flags)
{
return 0;
diff --git a/board/bmw/bmw.c b/board/bmw/bmw.c
index 4039145..5ba6c09 100644
--- a/board/bmw/bmw.c
+++ b/board/bmw/bmw.c
@@ -22,7 +22,6 @@
*/
#include <common.h>
-#include <common.h>
#include <watchdog.h>
#include <command.h>
#include <malloc.h>
diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c
index 5ebcd66..b25887b 100644
--- a/board/cm5200/cm5200.c
+++ b/board/cm5200/cm5200.c
@@ -323,22 +323,6 @@
}
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-void post_word_store(ulong a)
-{
- vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
- *save_addr = a;
-}
-
-
-ulong post_word_load(void)
-{
- vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
- return *save_addr;
-}
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER */
-
-
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
diff --git a/board/ip04/config.mk b/board/ip04/config.mk
index bc14257..5766829 100644
--- a/board/ip04/config.mk
+++ b/board/ip04/config.mk
@@ -26,8 +26,8 @@
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
-CFLAGS_lib_generic += -O2
-CFLAGS_lzma += -O2
+CFLAGS_lib += -O2
+CFLAGS_lib/lzma += -O2
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
index d860337..ec0da6d 100644
--- a/board/ti/beagle/beagle.h
+++ b/board/ti/beagle/beagle.h
@@ -386,6 +386,10 @@
MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/
#define MUX_BEAGLE_XM() \
+ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | EN | M4)) /*GPIO_56*/\
+ MUX_VAL(CP(GPMC_WAIT0), (IDIS | PTU | EN | M4)) /*GPIO_63*/\
+ MUX_VAL(CP(MMC1_DAT7), (IDIS | PTU | EN | M4)) /*GPIO_129*/\
+ MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\
MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\
MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\
MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\
diff --git a/board/ti/panda/panda.h b/board/ti/panda/panda.h
index eb1f021..e3d090e 100644
--- a/board/ti/panda/panda.h
+++ b/board/ti/panda/panda.h
@@ -53,7 +53,7 @@
{GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row7 */
{GPMC_A20, (IEN | M3)}, /* gpio_44 */
{GPMC_A21, (M3)}, /* gpio_45 */
- {GPMC_A22, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col6 */
+ {GPMC_A22, (M3)}, /* gpio_46 */
{GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col7 */
{GPMC_A24, (PTD | M3)}, /* gpio_48 */
{GPMC_A25, (PTD | M3)}, /* gpio_49 */
@@ -69,9 +69,9 @@
{GPMC_NBE0_CLE, (M3)}, /* gpio_59 */
{GPMC_NBE1, (PTD | M3)}, /* gpio_60 */
{GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */
- {GPMC_WAIT1, (IEN | M3)}, /* gpio_62 */
+ {GPMC_WAIT1, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_62 */
{C2C_DATA11, (PTD | M3)}, /* gpio_100 */
- {C2C_DATA12, (M1)}, /* dsi1_te0 */
+ {C2C_DATA12, (PTU | IEN | M3)}, /* gpio_101 */
{C2C_DATA13, (PTD | M3)}, /* gpio_102 */
{C2C_DATA14, (M1)}, /* dsi2_te0 */
{C2C_DATA15, (PTD | M3)}, /* gpio_104 */
@@ -189,12 +189,12 @@
{USBB2_ULPITLL_DAT7, (IEN | M5)}, /* dispc2_data11 */
{USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_169 */
{USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_170 */
- {UNIPRO_TX0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col0 */
+ {UNIPRO_TX0, (PTD | IEN | M3)}, /* gpio_171 */
{UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col1 */
{UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col2 */
{UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col3 */
- {UNIPRO_TX2, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_0 */
- {UNIPRO_TY2, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_1 */
+ {UNIPRO_TX2, (PTU | IEN | M3)}, /* gpio_0 */
+ {UNIPRO_TY2, (PTU | IEN | M3)}, /* gpio_1 */
{UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row0 */
{UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row1 */
{UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row2 */
@@ -205,7 +205,7 @@
{USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */
{USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */
{FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */
- {FREF_CLK2_OUT, (M0)}, /* fref_clk2_out */
+ {FREF_CLK2_OUT, (PTU | IEN | M3)}, /* gpio_182 */
{SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */
{SYS_NIRQ2, (PTU | IEN | M0)}, /* sys_nirq2 */
{SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */
@@ -230,7 +230,7 @@
{DPM_EMU13, (IEN | M5)}, /* dispc2_data6 */
{DPM_EMU14, (IEN | M5)}, /* dispc2_data5 */
{DPM_EMU15, (IEN | M5)}, /* dispc2_data4 */
- {DPM_EMU16, (IEN | M5)}, /* dispc2_data3 */
+ {DPM_EMU16, (M3)}, /* gpio_27 */
{DPM_EMU17, (IEN | M5)}, /* dispc2_data2 */
{DPM_EMU18, (IEN | M5)}, /* dispc2_data1 */
{DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */
@@ -248,7 +248,7 @@
{PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
{PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
{PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
- {PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /* # */
+ {PAD1_FREF_CLK3_REQ, (M3)}, /* gpio_wk30 */
{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
{PAD1_FREF_CLK4_REQ, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_1 */
{PAD0_FREF_CLK4_OUT, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_2 */
diff --git a/board/tqc/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c
index d90bae8..263a2af 100644
--- a/board/tqc/tqm5200/tqm5200.c
+++ b/board/tqc/tqm5200/tqm5200.c
@@ -375,25 +375,6 @@
}
#endif
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-void post_word_store (ulong a)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
-
- *save_addr = a;
-}
-
-ulong post_word_load (void)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
-
- return *save_addr;
-}
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
-
#ifdef CONFIG_BOARD_EARLY_INIT_R
int board_early_init_r (void)
{
diff --git a/board/xes/xpedite1000/xpedite1000.c b/board/xes/xpedite1000/xpedite1000.c
index b4cbb2f..a3534d2 100644
--- a/board/xes/xpedite1000/xpedite1000.c
+++ b/board/xes/xpedite1000/xpedite1000.c
@@ -196,20 +196,4 @@
{
return ctrlc();
}
-
-void post_word_store(ulong a)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
-
- *save_addr = a;
-}
-
-ulong post_word_load(void)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
-
- return *save_addr;
-}
#endif
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 4e7bcdf..4323f76 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -178,8 +178,7 @@
case 0:
case 1:
case 4:
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
+ return cmd_usage(cmdtp);
case 2:
if (!strcmp(argv[1], "list")) {
@@ -234,10 +233,8 @@
printf("%d blocks written: %s\n",
n, (n == cnt) ? "OK" : "ERROR");
return (n == cnt) ? 0 : 1;
- } else {
- printf("Usage:\n%s\n", cmdtp->usage);
- rc = 1;
- }
+ } else
+ rc = cmd_usage(cmdtp);
return rc;
}
diff --git a/common/fdt_support.c b/common/fdt_support.c
index aef4fe2..6f32e3f 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -591,11 +591,30 @@
#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
/*
+ * Provide a weak default function to return the flash bank size.
+ * There might be multiple non-identical flash chips connected to one
+ * chip-select, so we need to pass an index as well.
+ */
+u32 __flash_get_bank_size(int cs, int idx)
+{
+ extern flash_info_t flash_info[];
+
+ /*
+ * As default, a simple 1:1 mapping is provided. Boards with
+ * a different mapping need to supply a board specific mapping
+ * routine.
+ */
+ return flash_info[cs].size;
+}
+u32 flash_get_bank_size(int cs, int idx)
+ __attribute__((weak, alias("__flash_get_bank_size")));
+
+/*
* This function can be used to update the size in the "reg" property
- * of the NOR FLASH device nodes. This is necessary for boards with
+ * of all NOR FLASH device nodes. This is necessary for boards with
* non-fixed NOR FLASH sizes.
*/
-int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size)
+int fdt_fixup_nor_flash_size(void *blob)
{
char compat[][16] = { "cfi-flash", "jedec-flash" };
int off;
@@ -607,19 +626,31 @@
for (i = 0; i < 2; i++) {
off = fdt_node_offset_by_compatible(blob, -1, compat[i]);
while (off != -FDT_ERR_NOTFOUND) {
+ int idx;
+
/*
- * Found one compatible node, now check if this one
- * has the correct CS
+ * Found one compatible node, so fixup the size
+ * int its reg properties
*/
prop = fdt_get_property_w(blob, off, "reg", &len);
if (prop) {
+ int tuple_size = 3 * sizeof(reg);
+
+ /*
+ * There might be multiple reg-tuples,
+ * so loop through them all
+ */
+ len /= tuple_size;
reg = (u32 *)&prop->data[0];
- if (reg[0] == cs) {
- reg[2] = size;
+ for (idx = 0; idx < len; idx++) {
+ /*
+ * Update size in reg property
+ */
+ reg[2] = flash_get_bank_size(reg[0],
+ idx);
fdt_setprop(blob, off, "reg", reg,
- 3 * sizeof(u32));
-
- return 0;
+ tuple_size);
+ reg += tuple_size;
}
}
@@ -629,7 +660,7 @@
}
}
- return -1;
+ return 0;
}
#endif
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 354e80b..3ea0e6c 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -1045,6 +1045,7 @@
out_class:
class_destroy(ubi_class);
out:
+ mtd_devs = 0;
ubi_err("UBI error: cannot initialize UBI, error %d", err);
return err;
}
diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c
index e0ad029..556b97a 100644
--- a/drivers/spi/bfin_spi.c
+++ b/drivers/spi/bfin_spi.c
@@ -35,8 +35,6 @@
#define to_bfin_spi_slave(s) container_of(s, struct bfin_spi_slave, slave)
-#define MAX_CTRL_CS 7
-
#define gpio_cs(cs) ((cs) - MAX_CTRL_CS)
#ifdef CONFIG_BFIN_SPI_GPIO_CS
# define is_gpio_cs(cs) ((cs) > MAX_CTRL_CS)
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index 268bacf..dd849c2 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -230,8 +230,8 @@
#error only one of CONFIG_CONSOLE_CURSOR,CONFIG_VIDEO_SW_CURSOR,CONFIG_VIDEO_HW_CURSOR can be defined
#endif
void console_cursor (int state);
-#define CURSOR_ON console_cursor(1);
-#define CURSOR_OFF console_cursor(0);
+#define CURSOR_ON console_cursor(1)
+#define CURSOR_OFF console_cursor(0)
#define CURSOR_SET
#ifndef CONFIG_I8042_KBD
#warning Cursor drawing on/off needs timer function s.a. drivers/input/i8042.c
@@ -248,8 +248,8 @@
#endif
#define CURSOR_ON
#define CURSOR_OFF video_putchar(console_col * VIDEO_FONT_WIDTH,\
- console_row * VIDEO_FONT_HEIGHT, ' ');
-#define CURSOR_SET video_set_cursor();
+ console_row * VIDEO_FONT_HEIGHT, ' ')
+#define CURSOR_SET video_set_cursor()
#endif /* CONFIG_VIDEO_SW_CURSOR */
@@ -260,7 +260,7 @@
#define CURSOR_ON
#define CURSOR_OFF
#define CURSOR_SET video_set_hw_cursor(console_col * VIDEO_FONT_WIDTH, \
- (console_row * VIDEO_FONT_HEIGHT) + video_logo_height);
+ (console_row * VIDEO_FONT_HEIGHT) + video_logo_height)
#endif /* CONFIG_VIDEO_HW_CURSOR */
#ifdef CONFIG_VIDEO_LOGO
@@ -651,7 +651,8 @@
static void console_back (void)
{
- CURSOR_OFF console_col--;
+ CURSOR_OFF;
+ console_col--;
if (console_col < 0) {
console_col = CONSOLE_COLS - 1;
@@ -674,7 +675,7 @@
is >= CONSOLE_COLS
*/
if (console_col < CONSOLE_COLS)
- CURSOR_OFF
+ CURSOR_OFF;
console_row++;
console_col = 0;
@@ -690,7 +691,8 @@
static void console_cr (void)
{
- CURSOR_OFF console_col = 0;
+ CURSOR_OFF;
+ console_col = 0;
}
/*****************************************************************************/
@@ -711,7 +713,8 @@
break;
case 9: /* tab 8 */
- CURSOR_OFF console_col |= 0x0008;
+ CURSOR_OFF;
+ console_col |= 0x0008;
console_col &= ~0x0007;
if (console_col >= CONSOLE_COLS)
@@ -734,7 +737,8 @@
nl = 0;
}
}
-CURSOR_SET}
+ CURSOR_SET;
+}
/*****************************************************************************/
diff --git a/include/common.h b/include/common.h
index 0a64c71..0686a17 100644
--- a/include/common.h
+++ b/include/common.h
@@ -584,8 +584,6 @@
uint dpram_base_align(uint align);
uint dpram_alloc(uint size);
uint dpram_alloc_align(uint size,uint align);
-void post_word_store (ulong);
-ulong post_word_load (void);
void bootcount_store (ulong);
ulong bootcount_load (void);
#define BOOTCOUNT_MAGIC 0xB001C041
@@ -730,6 +728,9 @@
#ifdef CONFIG_POST
#define CONFIG_HAS_POST
+#ifndef CONFIG_POST_ALT_LIST
+#define CONFIG_POST_STD_LIST
+#endif
#endif
#ifdef CONFIG_INIT_CRITICAL
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 550c462..764f71b 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -109,6 +109,7 @@
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+#define CONFIG_PPC4xx_EMAC
#undef CONFIG_EXT_PHY
#define CONFIG_NET_MULTI 1
@@ -402,6 +403,7 @@
* I2C EEPROM (CAT24WC16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
@@ -414,16 +416,6 @@
/* last 4 bits of the address */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
- /* have only 8kB, 16kB is save here */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* ... */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Init Memory Controller:
*
@@ -574,17 +566,6 @@
#define DIMM_READ_ADDR 0xAB
#define DIMM_WRITE_ADDR 0xAA
-#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode 0 register */
-#define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Chip Clock Status register */
-#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* Chip Control 1 register */
-#define CPC0_EPRCSR (CNTRL_DCR_BASE+0x3) /* EMAC PHY Rcv Clk Src register */
-#define CPC0_PLLMR1 (CNTRL_DCR_BASE+0x4) /* PLL mode 1 register */
-#define CPC0_UCR (CNTRL_DCR_BASE+0x5) /* UART Control register */
-#define CPC0_SRR (CNTRL_DCR_BASE+0x6) /* Soft Reset register */
-#define CPC0_JTAGID (CNTRL_DCR_BASE+0x7) /* JTAG ID register */
-#define CPC0_SPARE (CNTRL_DCR_BASE+0x8) /* Spare DCR */
-#define CPC0_PCI (CNTRL_DCR_BASE+0x9) /* PCI Control register */
-
/* Defines for CPC0_PLLMR1 Register fields */
#define PLL_ACTIVE 0x80000000
#define CPC0_PLLMR1_SSCS 0x80000000
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index a44d8fa..94cc317 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -81,8 +81,7 @@
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Rsrv 128kB for malloc */
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index d805a24..2e63306 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -143,8 +143,7 @@
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Rsrv 128kB for malloc */
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index e833e6d..bfff750 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -311,10 +311,6 @@
/* reserve some memory for POST and BOOT limit info */
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 32)
-#ifdef CONFIG_POST /* reserve one word for POST Info */
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 4)
-#endif
-
#ifdef CONFIG_BOOTCOUNT_LIMIT /* reserve 2 word for bootcount limit */
#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 12)
#endif
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index fd2e9a9..bf2247d 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -87,7 +87,7 @@
#define CONFIG_SYS_INIT_RAM_END (4 << 10)
#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
/*-----------------------------------------------------------------------
* Serial Port
@@ -374,7 +374,6 @@
CONFIG_SYS_POST_ETHER | \
CONFIG_SYS_POST_SPR)
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
#define CONFIG_LOGBUFFER
#define CONFIG_SYS_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 6da18eb..7a6602c 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -126,7 +126,7 @@
#endif
#ifdef CONFIG_POST
-#define CONFIG__CMD_DIAG
+#define CONFIG_CMD_DIAG
#endif
diff --git a/include/configs/XPEDITE1000.h b/include/configs/XPEDITE1000.h
index f76ede3..8b47862 100644
--- a/include/configs/XPEDITE1000.h
+++ b/include/configs/XPEDITE1000.h
@@ -102,8 +102,7 @@
#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index b6f909c..39f85ae 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -121,7 +121,13 @@
#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
#else
-#define CONFIG_SYS_NO_FLASH 1 /* No NOR on Acadia when NAND-booting */
+/*
+ * No NOR-flash on Acadia when NAND-booting. We need to undef the
+ * NOR device-tree fixup code as well, since flash_info is not defined
+ * in this case.
+ */
+#define CONFIG_SYS_NO_FLASH 1
+#undef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
#endif
#ifdef CONFIG_ENV_IS_IN_FLASH
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index 75106b4..7038291 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -65,8 +65,7 @@
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
diff --git a/include/configs/barco.h b/include/configs/barco.h
index e00f84a..b1af701 100644
--- a/include/configs/barco.h
+++ b/include/configs/barco.h
@@ -136,6 +136,8 @@
#define CONFIG_LOGBUFFER
#ifdef CONFIG_LOGBUFFER
#define CONFIG_SYS_STDOUT_ADDR 0x1FFC000
+#define CONFIG_SYS_POST_WORD_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE - 4)
#else
#define CONFIG_SYS_STDOUT_ADDR 0x2B9000
#endif
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index 96704d7..fc9784e 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -265,6 +265,7 @@
#define FLASH_START_POST_BLOCK 11 /* Should > = 11 */
#define FLASH_END_POST_BLOCK 71 /* Should < = 71 */
#endif
+#define CONFIG_SYS_POST_WORD_ADDR 0xFF903FFC
/* These are for board tests */
#if 0
diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index 4476268..91dcacc 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -50,6 +50,7 @@
# endif
# ifdef CONFIG_POST
# define CONFIG_CMD_DIAG
+# define CONFIG_POST_ALT_LIST
# endif
# ifdef CONFIG_RTC_BFIN
# define CONFIG_CMD_DATE
diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h
index 369b368..26992e7 100644
--- a/include/configs/hcu4.h
+++ b/include/configs/hcu4.h
@@ -72,7 +72,7 @@
#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE
#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
/*-----------------------------------------------------------------------
* Serial Port
@@ -192,7 +192,6 @@
CONFIG_SYS_POST_SPR)
#define CONFIG_SYS_POST_UART_TABLE {UART0_BASE}
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
#undef CONFIG_LOGBUFFER
#define CONFIG_SYS_POST_CACHE_ADDR 0x00800000 /* free virtual address */
#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h
index 10b1e0f..f2ab50c 100644
--- a/include/configs/hcu5.h
+++ b/include/configs/hcu5.h
@@ -83,7 +83,7 @@
#define CONFIG_SYS_INIT_RAM_END (4 << 10)
#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
/*-----------------------------------------------------------------------
* Serial Port
@@ -207,9 +207,8 @@
CONFIG_SYS_POST_FPU | \
CONFIG_SYS_POST_ETHER | \
CONFIG_SYS_POST_SPR)
-#define CONFIG_SYS_POST_UART_TABLE {UART0_BASE}
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_SYS_POST_UART_TABLE {UART0_BASE}
#define CONFIG_SYS_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */
#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index f9cdcbc..d40b7a9 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -190,14 +190,16 @@
/* Use ON-Chip SRAM until RAM will be available */
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
-#ifdef CONFIG_POST
+
/* preserve space for the post_word at end of on-chip SRAM */
+#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4)
+
+#ifdef CONFIG_POST
#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
#else
#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE
#endif
-
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
diff --git a/include/configs/icon.h b/include/configs/icon.h
index 779af25..ad0ca5d 100644
--- a/include/configs/icon.h
+++ b/include/configs/icon.h
@@ -99,8 +99,7 @@
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
/*
* Serial Port
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index c5b1565..69365e6 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -200,14 +200,16 @@
/* Use ON-Chip SRAM until RAM will be available */
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
-#ifdef CONFIG_POST
+
/* preserve space for the post_word at end of on-chip SRAM */
+#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4)
+
+#ifdef CONFIG_POST
#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
#else
#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE
#endif
-
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index 884dd74..e4ccd7d 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -98,8 +98,7 @@
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
/*-----------------------------------------------------------------------
* Serial Port
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
index 937d7c5..37eaf8f 100644
--- a/include/configs/kilauea.h
+++ b/include/configs/kilauea.h
@@ -102,11 +102,10 @@
#if defined(CONFIG_SYS_INIT_DCACHE_CS)
# define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-# define CONFIG_SYS_POST_ALT_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
+# define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
#else
# define CONFIG_SYS_INIT_EXTRA_SIZE 16
# define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE)
-# define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 4)
# define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_INIT_RAM_ADDR
#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
diff --git a/include/configs/korat.h b/include/configs/korat.h
index 0107a7b..55ef4f0 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -85,7 +85,7 @@
#define CONFIG_SYS_INIT_RAM_END (4 << 10)
#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
/*
* Serial Port
@@ -306,7 +306,6 @@
CONFIG_SYS_POST_SPR | \
CONFIG_SYS_POST_UART)
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
#define CONFIG_LOGBUFFER
#define CONFIG_SYS_POST_CACHE_ADDR 0xC8000000 /* free virtual address */
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 9df6fc7..72e02f8 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -81,7 +81,7 @@
#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data*/
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_POST_ALT_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
+#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
/* unused GPT0 COMP reg */
#define CONFIG_SYS_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */
/* 440EPx errata CHIP 11 */
diff --git a/include/configs/makalu.h b/include/configs/makalu.h
index 83a2d4a..905c719 100644
--- a/include/configs/makalu.h
+++ b/include/configs/makalu.h
@@ -100,11 +100,10 @@
#if defined(CONFIG_SYS_INIT_DCACHE_CS)
# define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-# define CONFIG_SYS_POST_ALT_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
+# define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
#else
# define CONFIG_SYS_INIT_EXTRA_SIZE 16
# define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE)
-# define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 4)
# define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_INIT_RAM_ADDR
#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
diff --git a/include/configs/mcu25.h b/include/configs/mcu25.h
index 6042986..3e04cfe 100644
--- a/include/configs/mcu25.h
+++ b/include/configs/mcu25.h
@@ -72,7 +72,7 @@
#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE
#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
/*-----------------------------------------------------------------------
* Serial Port
@@ -193,7 +193,6 @@
CONFIG_SYS_POST_SPR)
#define CONFIG_SYS_POST_UART_TABLE {UART0_BASE}
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
#undef CONFIG_LOGBUFFER
#define CONFIG_SYS_POST_CACHE_ADDR 0x00800000 /* free virtual address */
#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
diff --git a/include/configs/mpc5121-common.h b/include/configs/mpc5121-common.h
index 96fab20..afae1ab 100644
--- a/include/configs/mpc5121-common.h
+++ b/include/configs/mpc5121-common.h
@@ -30,8 +30,7 @@
#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes of initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */
#define CONFIG_SYS_MEMTEST_END 0x00400000
diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h
index 4f59cc6..d11d218 100644
--- a/include/configs/ocotea.h
+++ b/include/configs/ocotea.h
@@ -74,8 +74,7 @@
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
/*-----------------------------------------------------------------------
* Serial Port
diff --git a/include/configs/redwood.h b/include/configs/redwood.h
index 913db94..3c1e882 100644
--- a/include/configs/redwood.h
+++ b/include/configs/redwood.h
@@ -91,8 +91,7 @@
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
/*-----------------------------------------------------------------------
* DDR SDRAM
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 900d1db..988d41f 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -97,7 +97,7 @@
#define CONFIG_SYS_INIT_RAM_END (4 << 10)
#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
/*
* Serial Port
@@ -353,7 +353,6 @@
CONFIG_SYS_POST_SPR | \
CONFIG_SYS_POST_UART)
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
#define CONFIG_LOGBUFFER
#define CONFIG_SYS_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */
diff --git a/include/configs/taishan.h b/include/configs/taishan.h
index ce4a612..faf9e20 100644
--- a/include/configs/taishan.h
+++ b/include/configs/taishan.h
@@ -70,8 +70,7 @@
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data*/
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
/*-----------------------------------------------------------------------
* Serial Port
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index a540355..4e64eec 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -99,8 +99,7 @@
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
/*-----------------------------------------------------------------------
* Serial Port
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index 6fbf38a..aa250cc 100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -259,9 +259,10 @@
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 16)
/* extra data in OCM */
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 4)
-#define CONFIG_SYS_POST_MAGIC (CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_GBL_DATA_OFFSET - 8)
-#define CONFIG_SYS_POST_VAL (CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_GBL_DATA_OFFSET - 12)
+#define CONFIG_SYS_POST_MAGIC \
+ (CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_GBL_DATA_OFFSET - 8)
+#define CONFIG_SYS_POST_VAL \
+ (CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_GBL_DATA_OFFSET - 12)
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 871ef45..fd94929 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -79,7 +79,7 @@
void set_working_fdt_addr(void *addr);
int fdt_resize(void *blob);
-int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size);
+int fdt_fixup_nor_flash_size(void *blob);
void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size);
void fdt_del_node_and_alias(void *blob, const char *alias);
diff --git a/include/post.h b/include/post.h
index 3da959d..625da55 100644
--- a/include/post.h
+++ b/include/post.h
@@ -2,6 +2,10 @@
* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
+ * (C) Copyright 2010
+ * Michael Zaidman, Kodak, michael.zaidman@kodak.com
+ * post_word_{load|store} cleanup.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -25,8 +29,59 @@
#ifndef __ASSEMBLY__
#include <common.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+
+#ifdef CONFIG_SYS_POST_WORD_ADDR
+#define _POST_WORD_ADDR CONFIG_SYS_POST_WORD_ADDR
+#else
+
+#ifdef CONFIG_MPC5xxx
+#define _POST_WORD_ADDR (MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE)
+
+#elif defined(CONFIG_MPC512X)
+#define _POST_WORD_ADDR \
+ (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+
+#elif defined(CONFIG_8xx)
+#define _POST_WORD_ADDR \
+ (((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR)
+
+#elif defined(CONFIG_MPC8260)
+#include <asm/cpm_8260.h>
+#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR)
+
+#elif defined(CONFIG_MPC8360)
+#include <asm/immap_qe.h>
+#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR)
+
+#elif defined (CONFIG_MPC85xx)
+#include <asm/cpm_85xx.h>
+#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR)
+
+#elif defined (CONFIG_4xx)
+#define _POST_WORD_ADDR \
+ (CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
#endif
+#ifndef _POST_WORD_ADDR
+#error "_POST_WORD_ADDR currently not implemented for this platform!"
+#endif
+#endif /* CONFIG_SYS_POST_WORD_ADDR */
+
+static inline ulong post_word_load (void)
+{
+ return in_le32((volatile void *)(_POST_WORD_ADDR));
+}
+
+static inline void post_word_store (ulong value)
+{
+ out_le32((volatile void *)(_POST_WORD_ADDR), value);
+}
+#endif /* defined (CONFIG_POST) || defined(CONFIG_LOGBUFFER) */
+#endif /* __ASSEMBLY__ */
+
#ifdef CONFIG_POST
#define POST_POWERON 0x01 /* test runs on power-on booting */
@@ -40,7 +95,7 @@
#define POST_RAM 0x0200 /* test runs in RAM */
#define POST_MANUAL 0x0400 /* test runs on diag command */
#define POST_REBOOT 0x0800 /* test may cause rebooting */
-#define POST_PREREL 0x1000 /* test runs before relocation */
+#define POST_PREREL 0x1000 /* test runs before relocation */
#define POST_CRITICAL 0x2000 /* Use failbootcmd if test failed */
#define POST_STOP 0x4000 /* Interrupt POST sequence on fail */
diff --git a/post/Makefile b/post/Makefile
index 769e9c6..169d126 100644
--- a/post/Makefile
+++ b/post/Makefile
@@ -26,7 +26,8 @@
LIB = libpost.a
GPLIB-$(CONFIG_HAS_POST) += libgenpost.a
-COBJS-$(CONFIG_HAS_POST) += post.o tests.o
+COBJS-$(CONFIG_HAS_POST) += post.o
+COBJS-$(CONFIG_POST_STD_LIST) += tests.o
SPLIB-$(CONFIG_HAS_POST) = drivers/libpostdrivers.a
SPLIB-$(CONFIG_HAS_POST) += $(shell if [ -d lib_$(ARCH) ]; then echo \
diff --git a/post/cpu/ppc4xx/uart.c b/post/cpu/ppc4xx/uart.c
index be217fc..6b61cc1 100644
--- a/post/cpu/ppc4xx/uart.c
+++ b/post/cpu/ppc4xx/uart.c
@@ -4,6 +4,8 @@
*
* Author: Igor Lisitsin <igor@emcraft.com>
*
+ * Copyright 2010, Stefan Roese, DENX Software Engineering, sr@denx.de
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -24,6 +26,9 @@
*/
#include <common.h>
+#include <ppc4xx.h>
+#include <ns16550.h>
+#include <asm/io.h>
/*
* UART test
@@ -119,32 +124,23 @@
#define UDIV_MAX 32
#endif
-#define UART_RBR 0x00
-#define UART_THR 0x00
-#define UART_IER 0x01
-#define UART_IIR 0x02
-#define UART_FCR 0x02
-#define UART_LCR 0x03
-#define UART_MCR 0x04
-#define UART_LSR 0x05
-#define UART_MSR 0x06
-#define UART_SCR 0x07
-#define UART_DLL 0x00
-#define UART_DLM 0x01
+DECLARE_GLOBAL_DATA_PTR;
-/*
- * Line Status Register.
- */
-#define asyncLSRDataReady1 0x01
-#define asyncLSROverrunError1 0x02
-#define asyncLSRParityError1 0x04
-#define asyncLSRFramingError1 0x08
-#define asyncLSRBreakInterrupt1 0x10
-#define asyncLSRTxHoldEmpty1 0x20
-#define asyncLSRTxShiftEmpty1 0x40
-#define asyncLSRRxFifoError1 0x80
+static void uart_post_init_common(struct NS16550 *com_port, unsigned short bdiv)
+{
+ volatile char val;
-DECLARE_GLOBAL_DATA_PTR;
+ out_8(&com_port->lcr, 0x80); /* set DLAB bit */
+ out_8(&com_port->dll, bdiv); /* set baudrate divisor */
+ out_8(&com_port->dlm, bdiv >> 8); /* set baudrate divisor */
+ out_8(&com_port->lcr, 0x03); /* clear DLAB; set 8 bits, no parity */
+ out_8(&com_port->fcr, 0x00); /* disable FIFO */
+ out_8(&com_port->mcr, 0x10); /* enable loopback mode */
+ val = in_8(&com_port->lsr); /* clear line status */
+ val = in_8(&com_port->rbr); /* read receive buffer */
+ out_8(&com_port->scr, 0x00); /* set scratchpad */
+ out_8(&com_port->ier, 0x00); /* set interrupt enable reg */
+}
#if defined(CONFIG_440) || defined(CONFIG_405EX)
#if !defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
@@ -190,19 +186,18 @@
}
#endif
-static int uart_post_init (unsigned long dev_base)
+static int uart_post_init (struct NS16550 *com_port)
{
unsigned long reg = 0;
unsigned long udiv;
unsigned short bdiv;
- volatile char val;
#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
unsigned long tmp;
#endif
int i;
for (i = 0; i < 3500; i++) {
- if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1)
+ if (in_8(&com_port->lsr) & UART_LSR_THRE)
break;
udelay (100);
}
@@ -239,34 +234,24 @@
MTREG(UART3_SDR, reg);
#endif
- out8(dev_base + UART_LCR, 0x80); /* set DLAB bit */
- out8(dev_base + UART_DLL, bdiv); /* set baudrate divisor */
- out8(dev_base + UART_DLM, bdiv >> 8); /* set baudrate divisor */
- out8(dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out8(dev_base + UART_FCR, 0x00); /* disable FIFO */
- out8(dev_base + UART_MCR, 0x10); /* enable loopback mode */
- val = in8(dev_base + UART_LSR); /* clear line status */
- val = in8(dev_base + UART_RBR); /* read receive buffer */
- out8(dev_base + UART_SCR, 0x00); /* set scratchpad */
- out8(dev_base + UART_IER, 0x00); /* set interrupt enable reg */
+ uart_post_init_common(com_port, bdiv);
return 0;
}
#else /* CONFIG_440 */
-static int uart_post_init (unsigned long dev_base)
+static int uart_post_init (struct NS16550 *com_port)
{
unsigned long reg;
unsigned long tmp;
unsigned long clk;
unsigned long udiv;
unsigned short bdiv;
- volatile char val;
int i;
for (i = 0; i < 3500; i++) {
- if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1)
+ if (in_8(&com_port->lsr) & UART_LSR_THRE)
break;
udelay (100);
}
@@ -309,59 +294,51 @@
bdiv = (clk + tmp / 2) / tmp;
#endif /* CONFIG_405EZ */
- out8(dev_base + UART_LCR, 0x80); /* set DLAB bit */
- out8(dev_base + UART_DLL, bdiv); /* set baudrate divisor */
- out8(dev_base + UART_DLM, bdiv >> 8); /* set baudrate divisor */
- out8(dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out8(dev_base + UART_FCR, 0x00); /* disable FIFO */
- out8(dev_base + UART_MCR, 0x10); /* enable loopback mode */
- val = in8(dev_base + UART_LSR); /* clear line status */
- val = in8(dev_base + UART_RBR); /* read receive buffer */
- out8(dev_base + UART_SCR, 0x00); /* set scratchpad */
- out8(dev_base + UART_IER, 0x00); /* set interrupt enable reg */
+ uart_post_init_common(com_port, bdiv);
- return (0);
+ return 0;
}
#endif /* CONFIG_440 */
-static void uart_post_putc (unsigned long dev_base, char c)
+static void uart_post_putc (struct NS16550 *com_port, char c)
{
int i;
- out8 (dev_base + UART_THR, c); /* put character out */
+ out_8(&com_port->thr, c); /* put character out */
/* Wait for transfer completion */
for (i = 0; i < 3500; i++) {
- if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1)
+ if (in_8(&com_port->lsr) & UART_LSR_THRE)
break;
udelay (100);
}
}
-static int uart_post_getc (unsigned long dev_base)
+static int uart_post_getc (struct NS16550 *com_port)
{
int i;
/* Wait for character available */
for (i = 0; i < 3500; i++) {
- if (in8 (dev_base + UART_LSR) & asyncLSRDataReady1)
+ if (in_8(&com_port->lsr) & UART_LSR_DR)
break;
udelay (100);
}
- return 0xff & in8 (dev_base + UART_RBR);
+
+ return 0xff & in_8(&com_port->rbr);
}
-static int test_ctlr (unsigned long dev_base, int index)
+static int test_ctlr (struct NS16550 *com_port, int index)
{
int res = -1;
char test_str[] = "*** UART Test String ***\r\n";
int i;
- uart_post_init (dev_base);
+ uart_post_init (com_port);
for (i = 0; i < sizeof (test_str) - 1; i++) {
- uart_post_putc (dev_base, test_str[i]);
- if (uart_post_getc (dev_base) != test_str[i])
+ uart_post_putc (com_port, test_str[i]);
+ if (uart_post_getc (com_port) != test_str[i])
goto done;
}
res = 0;
@@ -377,8 +354,8 @@
int i, res = 0;
static unsigned long base[] = CONFIG_SYS_POST_UART_TABLE;
- for (i = 0; i < sizeof (base) / sizeof (base[0]); i++) {
- if (test_ctlr (base[i], i))
+ for (i = 0; i < ARRAY_SIZE(base); i++) {
+ if (test_ctlr((struct NS16550 *)base[i], i))
res = -1;
}
serial_reinit_all ();
diff --git a/tools/setlocalversion b/tools/setlocalversion
index b3f5f28..e11f54f 100755
--- a/tools/setlocalversion
+++ b/tools/setlocalversion
@@ -13,7 +13,8 @@
# Do we have an untagged version?
if git name-rev --tags HEAD | \
grep -E '^HEAD[[:space:]]+(.*~[0-9]*|undefined)$' > /dev/null; then
- git describe | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+ (git describe || git describe --tags || git describe --all --long) \
+ 2>/dev/null | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
fi
# Are there uncommitted changes?