diff --git a/Makefile b/Makefile
index 84947d0..8df60fa 100644
--- a/Makefile
+++ b/Makefile
@@ -24,7 +24,7 @@
 VERSION = 2010
 PATCHLEVEL = 09
 SUBLEVEL =
-EXTRAVERSION = -rc2
+EXTRAVERSION =
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
diff --git a/README b/README
index feb51ab..171e0d6 100644
--- a/README
+++ b/README
@@ -126,13 +126,17 @@
 Versioning:
 ===========
 
-U-Boot uses a 3 level version number containing a version, a
-sub-version, and a patchlevel: "U-Boot-2.34.5" means version "2",
-sub-version "34", and patchlevel "4".
+Starting with the release in October 2008, the names of the releases
+were changed from numerical release numbers without deeper meaning
+into a time stamp based numbering. Regular releases are identified by
+names consisting of the calendar year and month of the release date.
+Additional fields (if present) indicate release candidates or bug fix
+releases in "stable" maintenance trees.
 
-The patchlevel is used to indicate certain stages of development
-between released versions, i. e. officially released versions of
-U-Boot will always have a patchlevel of "0".
+Examples:
+	U-Boot v2009.11     - Release November 2009
+	U-Boot v2009.11.1   - Release 1 in version November 2009 stable tree
+	U-Boot v2010.09-rc1 - Release candiate 1 for September 2010 release
 
 
 Directory Hierarchy:
diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c
index 195be6e..8c1f395 100644
--- a/arch/arm/cpu/armv7/omap4/board.c
+++ b/arch/arm/cpu/armv7/omap4/board.c
@@ -30,6 +30,7 @@
 #include <common.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/sys_proto.h>
+#include <asm/sizes.h>
 
 /*
  * Routine: s_init
@@ -66,6 +67,33 @@
 	writel(WD_UNLOCK2, &wd2_base->wspr);
 }
 
+
+/*
+ * This function finds the SDRAM size available in the system
+ * based on DMM section configurations
+ * This is needed because the size of memory installed may be
+ * different on different versions of the board
+ */
+u32 sdram_size(void)
+{
+	u32 section, i, total_size = 0, size, addr;
+	for (i = 0; i < 4; i++) {
+		section	= __raw_readl(DMM_LISA_MAP_BASE + i*4);
+		addr = section & DMM_LISA_MAP_SYS_ADDR_MASK;
+		/* See if the address is valid */
+		if ((addr >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
+		    (addr < OMAP44XX_DRAM_ADDR_SPACE_END)) {
+			size	= ((section & DMM_LISA_MAP_SYS_SIZE_MASK) >>
+				    DMM_LISA_MAP_SYS_SIZE_SHIFT);
+			size	= 1 << size;
+			size	*= SZ_16M;
+			total_size += size;
+		}
+	}
+	return total_size;
+}
+
+
 /*
  * Routine: dram_init
  * Description: sets uboots idea of sdram size
@@ -75,7 +103,7 @@
 	DECLARE_GLOBAL_DATA_PTR;
 
 	gd->bd->bi_dram[0].start = 0x80000000;
-	gd->bd->bi_dram[0].size = 512 << 20;
+	gd->bd->bi_dram[0].size = sdram_size();
 	return 0;
 }
 
diff --git a/arch/arm/cpu/ixp/npe/IxNpeDlNpeMgr.c b/arch/arm/cpu/ixp/npe/IxNpeDlNpeMgr.c
index f5a4c5f..a9ea8bc 100644
--- a/arch/arm/cpu/ixp/npe/IxNpeDlNpeMgr.c
+++ b/arch/arm/cpu/ixp/npe/IxNpeDlNpeMgr.c
@@ -51,11 +51,6 @@
 /*
  * Put the user defined include files required.
  */
-
-
-/*
- * Put the user defined include files required.
- */
 #include "IxOsal.h"
 #include "IxNpeDl.h"
 #include "IxNpeDlNpeMgr_p.h"
diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap4.h
index d0c808d..a30bb33 100644
--- a/arch/arm/include/asm/arch-omap4/omap4.h
+++ b/arch/arm/include/asm/arch-omap4/omap4.h
@@ -42,6 +42,10 @@
 #define OMAP44XX_L4_WKUP_BASE	0x4A300000
 #define OMAP44XX_L4_PER_BASE	0x48000000
 
+#define OMAP44XX_DRAM_ADDR_SPACE_START	0x80000000
+#define OMAP44XX_DRAM_ADDR_SPACE_END	0xD0000000
+
+
 /* CONTROL */
 #define CTRL_BASE		(OMAP44XX_L4_CORE_BASE + 0x2000)
 #define CONTROL_PADCONF_CORE	(OMAP44XX_L4_CORE_BASE + 0x100000)
@@ -66,6 +70,12 @@
 /* GPMC */
 #define OMAP44XX_GPMC_BASE	0x50000000
 
+/* DMM */
+#define OMAP44XX_DMM_BASE		0x4E000000
+#define DMM_LISA_MAP_BASE		(OMAP44XX_DMM_BASE + 0x40)
+#define DMM_LISA_MAP_SYS_SIZE_MASK	(7 << 20)
+#define DMM_LISA_MAP_SYS_SIZE_SHIFT	20
+#define DMM_LISA_MAP_SYS_ADDR_MASK	(0xFF << 24)
 /*
  * Hardware Register Details
  */
diff --git a/arch/blackfin/include/asm/config-pre.h b/arch/blackfin/include/asm/config-pre.h
index 4531519..4ce67d4 100644
--- a/arch/blackfin/include/asm/config-pre.h
+++ b/arch/blackfin/include/asm/config-pre.h
@@ -71,6 +71,9 @@
 # define BFIN_BOOT_SPI_SSEL 1
 #endif
 
+/* Define to get a GPIO CS with the Blackfin SPI controller */
+#define MAX_CTRL_CS 8
+
 /* There is no Blackfin/NetBSD port */
 #undef CONFIG_BOOTM_NETBSD
 
diff --git a/arch/blackfin/lib/Makefile b/arch/blackfin/lib/Makefile
index 3bdba75..a18bbd6 100644
--- a/arch/blackfin/lib/Makefile
+++ b/arch/blackfin/lib/Makefile
@@ -46,7 +46,7 @@
 COBJS-$(CONFIG_CMD_CACHE_DUMP) += cmd_cache_dump.o
 COBJS-$(CONFIG_CMD_KGDB) += kgdb.o
 COBJS-y	+= muldi3.o
-COBJS-$(CONFIG_POST) += post.o tests.o
+COBJS-$(CONFIG_POST_ALT_LIST) += tests.o
 COBJS-y	+= string.o
 
 SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c
index 46e36c8..7643250 100644
--- a/arch/blackfin/lib/board.c
+++ b/arch/blackfin/lib/board.c
@@ -322,7 +322,6 @@
 
 #if defined(CONFIG_POST)
 	post_output_backlog();
-	post_reloc();
 #endif
 
 	/* initialize malloc() area */
diff --git a/arch/blackfin/lib/post.c b/arch/blackfin/lib/post.c
deleted file mode 100644
index bd6aaf5..0000000
--- a/arch/blackfin/lib/post.c
+++ /dev/null
@@ -1,421 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <stdio_dev.h>
-#include <watchdog.h>
-#include <post.h>
-
-#ifdef CONFIG_LOGBUFFER
-#include <logbuff.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define POST_MAX_NUMBER		32
-
-#define BOOTMODE_MAGIC	0xDEAD0000
-
-int post_init_f(void)
-{
-	int res = 0;
-	unsigned int i;
-
-	for (i = 0; i < post_list_size; i++) {
-		struct post_test *test = post_list + i;
-
-		if (test->init_f && test->init_f()) {
-			res = -1;
-		}
-	}
-
-	gd->post_init_f_time = post_time_ms(0);
-	if (!gd->post_init_f_time) {
-		printf
-		    ("post/post.c: post_time_ms seems not to be implemented\n");
-	}
-
-	return res;
-}
-
-void post_bootmode_init(void)
-{
-	int bootmode = post_bootmode_get(0);
-	int newword;
-
-	if (post_hotkeys_pressed() && !(bootmode & POST_POWERTEST)) {
-		newword = BOOTMODE_MAGIC | POST_SLOWTEST;
-	} else if (bootmode == 0) {
-		newword = BOOTMODE_MAGIC | POST_POWERON;
-	} else if (bootmode == POST_POWERON || bootmode == POST_SLOWTEST) {
-		newword = BOOTMODE_MAGIC | POST_NORMAL;
-	} else {
-		/* Use old value */
-		newword = post_word_load() & ~POST_COLDBOOT;
-	}
-
-	if (bootmode == 0) {
-		/* We are booting after power-on */
-		newword |= POST_COLDBOOT;
-	}
-
-	post_word_store(newword);
-
-	/* Reset activity record */
-	gd->post_log_word = 0;
-}
-
-int post_bootmode_get(unsigned int *last_test)
-{
-	unsigned long word = post_word_load();
-	int bootmode;
-
-	if ((word & 0xFFFF0000) != BOOTMODE_MAGIC) {
-		return 0;
-	}
-
-	bootmode = word & 0x7F;
-
-	if (last_test && (bootmode & POST_POWERTEST)) {
-		*last_test = (word >> 8) & 0xFF;
-	}
-
-	return bootmode;
-}
-
-/* POST tests run before relocation only mark status bits .... */
-static void post_log_mark_start(unsigned long testid)
-{
-	gd->post_log_word |= (testid) << 16;
-}
-
-static void post_log_mark_succ(unsigned long testid)
-{
-	gd->post_log_word |= testid;
-}
-
-/* ... and the messages are output once we are relocated */
-void post_output_backlog(void)
-{
-	int j;
-
-	for (j = 0; j < post_list_size; j++) {
-		if (gd->post_log_word & (post_list[j].testid << 16)) {
-			post_log("POST %s ", post_list[j].cmd);
-			if (gd->post_log_word & post_list[j].testid)
-				post_log("PASSED\n");
-			else {
-				post_log("FAILED\n");
-				show_boot_progress (-31);
-			}
-		}
-	}
-}
-
-static void post_bootmode_test_on(unsigned int last_test)
-{
-	unsigned long word = post_word_load();
-
-	word |= POST_POWERTEST;
-
-	word |= (last_test & 0xFF) << 8;
-
-	post_word_store(word);
-}
-
-static void post_bootmode_test_off(void)
-{
-	unsigned long word = post_word_load();
-
-	word &= ~POST_POWERTEST;
-
-	post_word_store(word);
-}
-
-static void post_get_flags(int *test_flags)
-{
-	int flag[] = { POST_POWERON, POST_NORMAL, POST_SLOWTEST };
-	char *var[] = { "post_poweron", "post_normal", "post_slowtest" };
-	int varnum = sizeof(var) / sizeof(var[0]);
-	char list[128];		/* long enough for POST list */
-	char *name;
-	char *s;
-	int last;
-	int i, j;
-
-	for (j = 0; j < post_list_size; j++) {
-		test_flags[j] = post_list[j].flags;
-	}
-
-	for (i = 0; i < varnum; i++) {
-		if (getenv_f(var[i], list, sizeof(list)) <= 0)
-			continue;
-
-		for (j = 0; j < post_list_size; j++) {
-			test_flags[j] &= ~flag[i];
-		}
-
-		last = 0;
-		name = list;
-		while (!last) {
-			while (*name && *name == ' ')
-				name++;
-			if (*name == 0)
-				break;
-			s = name + 1;
-			while (*s && *s != ' ')
-				s++;
-			if (*s == 0)
-				last = 1;
-			else
-				*s = 0;
-
-			for (j = 0; j < post_list_size; j++) {
-				if (strcmp(post_list[j].cmd, name) == 0) {
-					test_flags[j] |= flag[i];
-					break;
-				}
-			}
-
-			if (j == post_list_size) {
-				printf("No such test: %s\n", name);
-			}
-
-			name = s + 1;
-		}
-	}
-
-	for (j = 0; j < post_list_size; j++) {
-		if (test_flags[j] & POST_POWERON) {
-			test_flags[j] |= POST_SLOWTEST;
-		}
-	}
-}
-
-static int post_run_single(struct post_test *test,
-			   int test_flags, int flags, unsigned int i)
-{
-	if ((flags & test_flags & POST_ALWAYS) &&
-	    (flags & test_flags & POST_MEM)) {
-		WATCHDOG_RESET();
-
-		if (!(flags & POST_REBOOT)) {
-			if ((test_flags & POST_REBOOT)
-			    && !(flags & POST_MANUAL)) {
-				post_bootmode_test_on(i);
-			}
-
-			if (test_flags & POST_PREREL)
-				post_log_mark_start(test->testid);
-			else
-				post_log("POST %s ", test->cmd);
-		}
-
-		if (test_flags & POST_PREREL) {
-			if ((*test->test) (flags) == 0)
-				post_log_mark_succ(test->testid);
-		} else {
-			if ((*test->test) (flags) != 0) {
-				post_log("FAILED\n");
-				show_boot_progress (-32);
-			} else
-				post_log("PASSED\n");
-		}
-
-		if ((test_flags & POST_REBOOT) && !(flags & POST_MANUAL)) {
-			post_bootmode_test_off();
-		}
-
-		return 0;
-	} else {
-		return -1;
-	}
-}
-
-int post_run(char *name, int flags)
-{
-	unsigned int i;
-	int test_flags[POST_MAX_NUMBER];
-
-	post_get_flags(test_flags);
-
-	if (name == NULL) {
-		unsigned int last;
-
-		if (post_bootmode_get(&last) & POST_POWERTEST) {
-			if (last < post_list_size &&
-			    (flags & test_flags[last] & POST_ALWAYS) &&
-			    (flags & test_flags[last] & POST_MEM)) {
-
-				post_run_single(post_list + last,
-						test_flags[last],
-						flags | POST_REBOOT, last);
-
-				for (i = last + 1; i < post_list_size; i++) {
-					post_run_single(post_list + i,
-							test_flags[i],
-							flags, i);
-				}
-			}
-		} else {
-			for (i = 0; i < post_list_size; i++) {
-				post_run_single(post_list + i,
-						test_flags[i], flags, i);
-			}
-		}
-
-		return 0;
-	} else {
-		for (i = 0; i < post_list_size; i++) {
-			if (strcmp(post_list[i].cmd, name) == 0)
-				break;
-		}
-
-		if (i < post_list_size) {
-			return post_run_single(post_list + i,
-					       test_flags[i], flags, i);
-		} else {
-			return -1;
-		}
-	}
-}
-
-static int post_info_single(struct post_test *test, int full)
-{
-	if (test->flags & POST_MANUAL) {
-		if (full)
-			printf("%s - %s\n"
-			       "  %s\n", test->cmd, test->name, test->desc);
-		else
-			printf("  %-15s - %s\n", test->cmd, test->name);
-
-		return 0;
-	} else {
-		return -1;
-	}
-}
-
-int post_info(char *name)
-{
-	unsigned int i;
-
-	if (name == NULL) {
-		for (i = 0; i < post_list_size; i++) {
-			post_info_single(post_list + i, 0);
-		}
-
-		return 0;
-	} else {
-		for (i = 0; i < post_list_size; i++) {
-			if (strcmp(post_list[i].cmd, name) == 0)
-				break;
-		}
-
-		if (i < post_list_size) {
-			return post_info_single(post_list + i, 1);
-		} else {
-			return -1;
-		}
-	}
-}
-
-int post_log(char *format, ...)
-{
-	va_list args;
-	uint i;
-	char printbuffer[CONFIG_SYS_PBSIZE];
-
-	va_start(args, format);
-
-	/* For this to work, printbuffer must be larger than
-	 * anything we ever want to print.
-	 */
-	i = vsprintf(printbuffer, format, args);
-	va_end(args);
-
-#ifdef CONFIG_LOGBUFFER
-	/* Send to the logbuffer */
-	logbuff_log(printbuffer);
-#else
-	/* Send to the stdout file */
-	puts(printbuffer);
-#endif
-
-	return 0;
-}
-
-void post_reloc(void)
-{
-	unsigned int i;
-
-	/*
-	 * We have to relocate the test table manually
-	 */
-	for (i = 0; i < post_list_size; i++) {
-		ulong addr;
-		struct post_test *test = post_list + i;
-
-		if (test->name) {
-			addr = (ulong) (test->name) + gd->reloc_off;
-			test->name = (char *)addr;
-		}
-
-		if (test->cmd) {
-			addr = (ulong) (test->cmd) + gd->reloc_off;
-			test->cmd = (char *)addr;
-		}
-
-		if (test->desc) {
-			addr = (ulong) (test->desc) + gd->reloc_off;
-			test->desc = (char *)addr;
-		}
-
-		if (test->test) {
-			addr = (ulong) (test->test) + gd->reloc_off;
-			test->test = (int (*)(int flags))addr;
-		}
-
-		if (test->init_f) {
-			addr = (ulong) (test->init_f) + gd->reloc_off;
-			test->init_f = (int (*)(void))addr;
-		}
-
-		if (test->reloc) {
-			addr = (ulong) (test->reloc) + gd->reloc_off;
-			test->reloc = (void (*)(void))addr;
-
-			test->reloc();
-		}
-	}
-}
-
-/*
- * Some tests (e.g. SYSMON) need the time when post_init_f started,
- * but we cannot use get_timer() at this point.
- *
- * On PowerPC we implement it using the timebase register.
- */
-unsigned long post_time_ms(unsigned long base)
-{
-	return (unsigned long)get_ticks() / (get_tbclk() / CONFIG_SYS_HZ) - base;
-}
diff --git a/arch/powerpc/cpu/mpc512x/Makefile b/arch/powerpc/cpu/mpc512x/Makefile
index d1b6946..37b06f3 100644
--- a/arch/powerpc/cpu/mpc512x/Makefile
+++ b/arch/powerpc/cpu/mpc512x/Makefile
@@ -29,7 +29,6 @@
 START	= start.o
 COBJS-y	:= cpu.o
 COBJS-y	+= traps.o
-COBJS-y += common.o
 COBJS-y += cpu_init.o
 COBJS-y += fixed_sdram.o
 COBJS-y += i2c.o
diff --git a/arch/powerpc/cpu/mpc512x/common.c b/arch/powerpc/cpu/mpc512x/common.c
deleted file mode 100644
index 180d323..0000000
--- a/arch/powerpc/cpu/mpc512x/common.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include <common.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-#if defined(CONFIG_SYS_POST_WORD_ADDR)
-# define _POST_ADDR	(CONFIG_SYS_POST_WORD_ADDR)
-#else
-#error echo "No POST word address defined"
-#endif
-
-void post_word_store(ulong a)
-{
-	volatile void *save_addr = (volatile void *)(_POST_ADDR);
-
-	out_be32(save_addr, a);
-}
-
-ulong post_word_load(void)
-{
-	volatile void *save_addr = (volatile void *)(_POST_ADDR);
-
-	return in_be32(save_addr);
-}
-#endif  /* CONFIG_POST || CONFIG_LOGBUFFER */
diff --git a/arch/powerpc/cpu/mpc8260/commproc.c b/arch/powerpc/cpu/mpc8260/commproc.c
index c522bc5..082957e 100644
--- a/arch/powerpc/cpu/mpc8260/commproc.c
+++ b/arch/powerpc/cpu/mpc8260/commproc.c
@@ -175,23 +175,3 @@
 	else
 		*bp |= CPM_BRG_EXTC_CLK5_15;
 }
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-void post_word_store (ulong a)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
-	*save_addr = a;
-}
-
-ulong post_word_load (void)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
-	return *save_addr;
-}
-
-#endif	/* CONFIG_POST || CONFIG_LOGBUFFER*/
diff --git a/arch/powerpc/cpu/mpc85xx/commproc.c b/arch/powerpc/cpu/mpc85xx/commproc.c
index f0fd1cb..292b723 100644
--- a/arch/powerpc/cpu/mpc85xx/commproc.c
+++ b/arch/powerpc/cpu/mpc85xx/commproc.c
@@ -183,23 +183,3 @@
 	else
 		*bp |= CPM_BRG_EXTC_CLK5_15;
 }
-
-#ifdef CONFIG_POST
-
-void post_word_store (ulong a)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
-	*save_addr = a;
-}
-
-ulong post_word_load (void)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
-	return *save_addr;
-}
-
-#endif	/* CONFIG_POST */
diff --git a/arch/powerpc/cpu/mpc8xx/commproc.c b/arch/powerpc/cpu/mpc8xx/commproc.c
index 2c85377..5fe01ff 100644
--- a/arch/powerpc/cpu/mpc8xx/commproc.c
+++ b/arch/powerpc/cpu/mpc8xx/commproc.c
@@ -83,23 +83,3 @@
 	return (gd->dp_alloc_base + mask) & ~mask;
 }
 #endif	/* CONFIG_SYS_ALLOC_DPRAM */
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-void post_word_store (ulong a)
-{
-	volatile void *save_addr =
-		((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR;
-
-	*(volatile ulong *) save_addr = a;
-}
-
-ulong post_word_load (void)
-{
-	volatile void *save_addr =
-		((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR;
-
-	return *(volatile ulong *) save_addr;
-}
-
-#endif	/* CONFIG_POST || CONFIG_LOGBUFFER*/
diff --git a/arch/powerpc/cpu/ppc4xx/Makefile b/arch/powerpc/cpu/ppc4xx/Makefile
index c9c1a33..fa8d10c 100644
--- a/arch/powerpc/cpu/ppc4xx/Makefile
+++ b/arch/powerpc/cpu/ppc4xx/Makefile
@@ -45,7 +45,6 @@
 ifdef CONFIG_CMD_CHIP_CONFIG
 COBJS	+= cmd_chip_config.o
 endif
-COBJS	+= commproc.o
 COBJS	+= cpu.o
 COBJS	+= cpu_init.o
 COBJS	+= denali_data_eye.o
diff --git a/arch/powerpc/cpu/ppc4xx/commproc.c b/arch/powerpc/cpu/ppc4xx/commproc.c
deleted file mode 100644
index 6bf95e6..0000000
--- a/arch/powerpc/cpu/ppc4xx/commproc.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- *
- * Atapted for ppc4XX by Denis Peter
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-#if defined(CONFIG_SYS_POST_WORD_ADDR)
-# define _POST_ADDR	((CONFIG_SYS_OCM_DATA_ADDR) + (CONFIG_SYS_POST_WORD_ADDR))
-#elif defined(CONFIG_SYS_POST_ALT_WORD_ADDR)
-# define _POST_ADDR	(CONFIG_SYS_POST_ALT_WORD_ADDR)
-#endif
-
-void post_word_store (ulong a)
-{
-	volatile void *save_addr = (volatile void *)(_POST_ADDR);
-
-	out_be32(save_addr, a);
-}
-
-ulong post_word_load (void)
-{
-	volatile void *save_addr = (volatile void *)(_POST_ADDR);
-
-	return in_be32(save_addr);
-}
-
-#endif	/* CONFIG_POST || CONFIG_LOGBUFFER*/
diff --git a/arch/powerpc/cpu/ppc4xx/fdt.c b/arch/powerpc/cpu/ppc4xx/fdt.c
index 90c7e19..5ddb880 100644
--- a/arch/powerpc/cpu/ppc4xx/fdt.c
+++ b/arch/powerpc/cpu/ppc4xx/fdt.c
@@ -59,14 +59,14 @@
 			*p++ = 0;
 			*p++ = bxcr & EBC_BXCR_BAS_MASK;
 			*p++ = EBC_BXCR_BANK_SIZE(bxcr);
+		}
+	}
+
 
 #ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
-			/* Try to update reg property in nor flash node too */
-			fdt_fixup_nor_flash_size(blob, i,
-						 EBC_BXCR_BANK_SIZE(bxcr));
+	/* Update reg property in all nor flash nodes too */
+	fdt_fixup_nor_flash_size(blob);
 #endif
-		}
-	}
 
 	/* Some 405 PPC's have EBC as direct PLB child in the dts */
 	if (fdt_path_offset(blob, ebc_path) < 0)
diff --git a/board/amcc/ebony/flash.c b/board/amcc/ebony/flash.c
index 94eeee2..df7716c 100644
--- a/board/amcc/ebony/flash.c
+++ b/board/amcc/ebony/flash.c
@@ -34,6 +34,7 @@
 #include <common.h>
 #include <asm/ppc4xx.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 
 #undef DEBUG
 #ifdef DEBUG
@@ -71,6 +72,36 @@
  */
 static ulong flash_get_size(vu_long * addr, flash_info_t * info);
 
+/*
+ * Override the weak default mapping function with a board specific one
+ */
+u32 flash_get_bank_size(int cs, int idx)
+{
+	u8 reg = in_8((void *)CONFIG_SYS_FPGA_BASE);
+
+	if ((reg & BOOT_SMALL_FLASH) && !(reg & FLASH_ONBD_N)) {
+		/*
+		 * cs0: small flash (512KiB)
+		 * cs2: 2 * big flash (2 * 2MiB)
+		 */
+		if (cs == 0)
+			return flash_info[2].size;
+		if (cs == 2)
+			return flash_info[0].size + flash_info[1].size;
+	} else {
+		/*
+		 * cs0: 2 * big flash (2 * 2MiB)
+		 * cs2: small flash (512KiB)
+		 */
+		if (cs == 0)
+			return flash_info[0].size + flash_info[1].size;
+		if (cs == 2)
+			return flash_info[2].size;
+	}
+
+	return 0;
+}
+
 unsigned long flash_init(void)
 {
 	unsigned long total_b = 0;
diff --git a/board/barco/barco.c b/board/barco/barco.c
index 6ce3480..263a288 100644
--- a/board/barco/barco.c
+++ b/board/barco/barco.c
@@ -342,12 +342,3 @@
 {
 	return 0;
 }
-
-unsigned long post_word_load (void)
-{
-	return 0l;
-}
-void post_word_store (unsigned long val)
-{
-	return;
-}
diff --git a/board/bc3450/bc3450.c b/board/bc3450/bc3450.c
index 3117b5f..97fb5a4 100644
--- a/board/bc3450/bc3450.c
+++ b/board/bc3450/bc3450.c
@@ -290,26 +290,6 @@
 }
 #endif
 
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-void post_word_store (ulong a)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
-
-	*save_addr = a;
-}
-
-ulong post_word_load (void)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
-
-	return *save_addr;
-}
-#endif	/* CONFIG_POST || CONFIG_LOGBUFFER*/
-
-
 #ifdef CONFIG_BOARD_EARLY_INIT_R
 int board_early_init_r (void)
 {
diff --git a/board/bf527-ad7160-eval/config.mk b/board/bf527-ad7160-eval/config.mk
index f85bef5..3f9d41f 100644
--- a/board/bf527-ad7160-eval/config.mk
+++ b/board/bf527-ad7160-eval/config.mk
@@ -26,8 +26,8 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
-CFLAGS_lib_generic += -O2
-CFLAGS_lzma += -O2
+CFLAGS_lib += -O2
+CFLAGS_lib/lzma += -O2
 
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile
index 4f8985b..47bf905 100644
--- a/board/bf537-stamp/Makefile
+++ b/board/bf537-stamp/Makefile
@@ -31,7 +31,7 @@
 
 COBJS-y	:= $(BOARD).o
 COBJS-$(CONFIG_BFIN_IDE)   += ide-cf.o
-COBJS-$(CONFIG_POST)       += post.o post-memory.o
+COBJS-$(CONFIG_HAS_POST)   += post.o post-memory.o
 
 SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS-y))
diff --git a/board/bf537-stamp/post.c b/board/bf537-stamp/post.c
index 4e844ba..c546ab6 100644
--- a/board/bf537-stamp/post.c
+++ b/board/bf537-stamp/post.c
@@ -13,8 +13,6 @@
 #include <command.h>
 #include <asm/blackfin.h>
 
-#define POST_WORD_ADDR 0xFF903FFC
-
 /* Using sw10-PF5 as the hotkey */
 int post_hotkeys_pressed(void)
 {
@@ -47,18 +45,6 @@
 	}
 }
 
-void post_word_store(ulong a)
-{
-	volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
-	*save_addr = a;
-}
-
-ulong post_word_load(void)
-{
-	volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
-	return *save_addr;
-}
-
 int uart_post_test(int flags)
 {
 	return 0;
diff --git a/board/bmw/bmw.c b/board/bmw/bmw.c
index 4039145..5ba6c09 100644
--- a/board/bmw/bmw.c
+++ b/board/bmw/bmw.c
@@ -22,7 +22,6 @@
  */
 
 #include <common.h>
-#include <common.h>
 #include <watchdog.h>
 #include <command.h>
 #include <malloc.h>
diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c
index 5ebcd66..b25887b 100644
--- a/board/cm5200/cm5200.c
+++ b/board/cm5200/cm5200.c
@@ -323,22 +323,6 @@
 }
 
 
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-void post_word_store(ulong a)
-{
-	vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
-	*save_addr = a;
-}
-
-
-ulong post_word_load(void)
-{
-	vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
-	return *save_addr;
-}
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER */
-
-
 #ifdef CONFIG_MISC_INIT_R
 int misc_init_r(void)
 {
diff --git a/board/ip04/config.mk b/board/ip04/config.mk
index bc14257..5766829 100644
--- a/board/ip04/config.mk
+++ b/board/ip04/config.mk
@@ -26,8 +26,8 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
-CFLAGS_lib_generic += -O2
-CFLAGS_lzma += -O2
+CFLAGS_lib += -O2
+CFLAGS_lib/lzma += -O2
 
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
index d860337..ec0da6d 100644
--- a/board/ti/beagle/beagle.h
+++ b/board/ti/beagle/beagle.h
@@ -386,6 +386,10 @@
 	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) /*UART2_TX*/
 
 #define MUX_BEAGLE_XM() \
+	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTD | EN  | M4)) /*GPIO_56*/\
+	MUX_VAL(CP(GPMC_WAIT0),		(IDIS | PTU | EN  | M4)) /*GPIO_63*/\
+	MUX_VAL(CP(MMC1_DAT7),		(IDIS | PTU | EN  | M4)) /*GPIO_129*/\
+	MUX_VAL(CP(HDQ_SIO),		(IDIS | PTU | EN  | M4)) /*GPIO_170*/\
 	MUX_VAL(CP(MCBSP3_DX),		(IEN  | PTD | DIS | M4)) /*GPIO_140*/\
 	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTD | DIS | M4)) /*GPIO_142*/\
 	MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTD | DIS | M4)) /*GPIO_141*/\
diff --git a/board/ti/panda/panda.h b/board/ti/panda/panda.h
index eb1f021..e3d090e 100644
--- a/board/ti/panda/panda.h
+++ b/board/ti/panda/panda.h
@@ -53,7 +53,7 @@
 	{GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row7 */
 	{GPMC_A20, (IEN | M3)},						/* gpio_44 */
 	{GPMC_A21, (M3)},						/* gpio_45 */
-	{GPMC_A22, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col6 */
+	{GPMC_A22, (M3)},						/* gpio_46 */
 	{GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col7 */
 	{GPMC_A24, (PTD | M3)},						/* gpio_48 */
 	{GPMC_A25, (PTD | M3)},						/* gpio_49 */
@@ -69,9 +69,9 @@
 	{GPMC_NBE0_CLE, (M3)},						/* gpio_59 */
 	{GPMC_NBE1, (PTD | M3)},					/* gpio_60 */
 	{GPMC_WAIT0, (PTU | IEN | M3)},					/* gpio_61 */
-	{GPMC_WAIT1, (IEN | M3)},					/* gpio_62 */
+	{GPMC_WAIT1,  (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_62 */
 	{C2C_DATA11, (PTD | M3)},					/* gpio_100 */
-	{C2C_DATA12, (M1)},						/* dsi1_te0 */
+	{C2C_DATA12, (PTU | IEN | M3)},					/* gpio_101 */
 	{C2C_DATA13, (PTD | M3)},					/* gpio_102 */
 	{C2C_DATA14, (M1)},						/* dsi2_te0 */
 	{C2C_DATA15, (PTD | M3)},					/* gpio_104 */
@@ -189,12 +189,12 @@
 	{USBB2_ULPITLL_DAT7, (IEN | M5)},				/* dispc2_data11 */
 	{USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)},		/* gpio_169 */
 	{USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)},		/* gpio_170 */
-	{UNIPRO_TX0, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col0 */
+	{UNIPRO_TX0, (PTD | IEN | M3)},					/* gpio_171 */
 	{UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col1 */
 	{UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col2 */
 	{UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col3 */
-	{UNIPRO_TX2, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)},	/* gpio_0 */
-	{UNIPRO_TY2, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)},	/* gpio_1 */
+	{UNIPRO_TX2, (PTU | IEN | M3)},					/* gpio_0 */
+	{UNIPRO_TY2, (PTU | IEN | M3)},					/* gpio_1 */
 	{UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row0 */
 	{UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row1 */
 	{UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row2 */
@@ -205,7 +205,7 @@
 	{USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* usba0_otg_dp */
 	{USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* usba0_otg_dm */
 	{FREF_CLK1_OUT, (M0)},						/* fref_clk1_out */
-	{FREF_CLK2_OUT, (M0)},						/* fref_clk2_out */
+	{FREF_CLK2_OUT, (PTU | IEN | M3)},				/* gpio_182 */
 	{SYS_NIRQ1, (PTU | IEN | M0)},					/* sys_nirq1 */
 	{SYS_NIRQ2, (PTU | IEN | M0)},					/* sys_nirq2 */
 	{SYS_BOOT0, (PTU | IEN | M3)},					/* gpio_184 */
@@ -230,7 +230,7 @@
 	{DPM_EMU13, (IEN | M5)},					/* dispc2_data6 */
 	{DPM_EMU14, (IEN | M5)},					/* dispc2_data5 */
 	{DPM_EMU15, (IEN | M5)},					/* dispc2_data4 */
-	{DPM_EMU16, (IEN | M5)},					/* dispc2_data3 */
+	{DPM_EMU16, (M3)},						/* gpio_27 */
 	{DPM_EMU17, (IEN | M5)},					/* dispc2_data2 */
 	{DPM_EMU18, (IEN | M5)},					/* dispc2_data1 */
 	{DPM_EMU19, (IEN | M5)},					/* dispc2_data0 */
@@ -248,7 +248,7 @@
 	{PAD0_FREF_SLICER_IN, (M0)},					/* fref_slicer_in */
 	{PAD1_FREF_CLK_IOREQ, (M0)},					/* fref_clk_ioreq */
 	{PAD0_FREF_CLK0_OUT, (M2)},					/* sys_drm_msecure */
-	{PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)},				/* # */
+	{PAD1_FREF_CLK3_REQ, (M3)},					/* gpio_wk30 */
 	{PAD0_FREF_CLK3_OUT, (M0)},					/* fref_clk3_out */
 	{PAD1_FREF_CLK4_REQ, (PTU | OFF_EN | OFF_OUT_PTU | M3)},	/* led status_1 */
 	{PAD0_FREF_CLK4_OUT, (PTU | OFF_EN | OFF_OUT_PTU | M3)},	/* led status_2 */
diff --git a/board/tqc/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c
index d90bae8..263a2af 100644
--- a/board/tqc/tqm5200/tqm5200.c
+++ b/board/tqc/tqm5200/tqm5200.c
@@ -375,25 +375,6 @@
 }
 #endif
 
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-void post_word_store (ulong a)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
-
-	*save_addr = a;
-}
-
-ulong post_word_load (void)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
-
-	return *save_addr;
-}
-#endif	/* CONFIG_POST || CONFIG_LOGBUFFER*/
-
 #ifdef CONFIG_BOARD_EARLY_INIT_R
 int board_early_init_r (void)
 {
diff --git a/board/xes/xpedite1000/xpedite1000.c b/board/xes/xpedite1000/xpedite1000.c
index b4cbb2f..a3534d2 100644
--- a/board/xes/xpedite1000/xpedite1000.c
+++ b/board/xes/xpedite1000/xpedite1000.c
@@ -196,20 +196,4 @@
 {
 	return ctrlc();
 }
-
-void post_word_store(ulong a)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
-
-	*save_addr = a;
-}
-
-ulong post_word_load(void)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
-
-	return *save_addr;
-}
 #endif
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 4e7bcdf..4323f76 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -178,8 +178,7 @@
 	case 0:
 	case 1:
 	case 4:
-		printf("Usage:\n%s\n", cmdtp->usage);
-		return 1;
+		return cmd_usage(cmdtp);
 
 	case 2:
 		if (!strcmp(argv[1], "list")) {
@@ -234,10 +233,8 @@
 			printf("%d blocks written: %s\n",
 				n, (n == cnt) ? "OK" : "ERROR");
 			return (n == cnt) ? 0 : 1;
-		} else {
-			printf("Usage:\n%s\n", cmdtp->usage);
-			rc = 1;
-		}
+		} else
+			rc = cmd_usage(cmdtp);
 
 		return rc;
 	}
diff --git a/common/fdt_support.c b/common/fdt_support.c
index aef4fe2..6f32e3f 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -591,11 +591,30 @@
 
 #ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
 /*
+ * Provide a weak default function to return the flash bank size.
+ * There might be multiple non-identical flash chips connected to one
+ * chip-select, so we need to pass an index as well.
+ */
+u32 __flash_get_bank_size(int cs, int idx)
+{
+	extern flash_info_t flash_info[];
+
+	/*
+	 * As default, a simple 1:1 mapping is provided. Boards with
+	 * a different mapping need to supply a board specific mapping
+	 * routine.
+	 */
+	return flash_info[cs].size;
+}
+u32 flash_get_bank_size(int cs, int idx)
+	__attribute__((weak, alias("__flash_get_bank_size")));
+
+/*
  * This function can be used to update the size in the "reg" property
- * of the NOR FLASH device nodes. This is necessary for boards with
+ * of all NOR FLASH device nodes. This is necessary for boards with
  * non-fixed NOR FLASH sizes.
  */
-int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size)
+int fdt_fixup_nor_flash_size(void *blob)
 {
 	char compat[][16] = { "cfi-flash", "jedec-flash" };
 	int off;
@@ -607,19 +626,31 @@
 	for (i = 0; i < 2; i++) {
 		off = fdt_node_offset_by_compatible(blob, -1, compat[i]);
 		while (off != -FDT_ERR_NOTFOUND) {
+			int idx;
+
 			/*
-			 * Found one compatible node, now check if this one
-			 * has the correct CS
+			 * Found one compatible node, so fixup the size
+			 * int its reg properties
 			 */
 			prop = fdt_get_property_w(blob, off, "reg", &len);
 			if (prop) {
+				int tuple_size = 3 * sizeof(reg);
+
+				/*
+				 * There might be multiple reg-tuples,
+				 * so loop through them all
+				 */
+				len /= tuple_size;
 				reg = (u32 *)&prop->data[0];
-				if (reg[0] == cs) {
-					reg[2] = size;
+				for (idx = 0; idx < len; idx++) {
+					/*
+					 * Update size in reg property
+					 */
+					reg[2] = flash_get_bank_size(reg[0],
+								     idx);
 					fdt_setprop(blob, off, "reg", reg,
-						    3 * sizeof(u32));
-
-					return 0;
+						    tuple_size);
+					reg += tuple_size;
 				}
 			}
 
@@ -629,7 +660,7 @@
 		}
 	}
 
-	return -1;
+	return 0;
 }
 #endif
 
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 354e80b..3ea0e6c 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -1045,6 +1045,7 @@
 out_class:
 	class_destroy(ubi_class);
 out:
+	mtd_devs = 0;
 	ubi_err("UBI error: cannot initialize UBI, error %d", err);
 	return err;
 }
diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c
index e0ad029..556b97a 100644
--- a/drivers/spi/bfin_spi.c
+++ b/drivers/spi/bfin_spi.c
@@ -35,8 +35,6 @@
 
 #define to_bfin_spi_slave(s) container_of(s, struct bfin_spi_slave, slave)
 
-#define MAX_CTRL_CS 7
-
 #define gpio_cs(cs) ((cs) - MAX_CTRL_CS)
 #ifdef CONFIG_BFIN_SPI_GPIO_CS
 # define is_gpio_cs(cs) ((cs) > MAX_CTRL_CS)
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index 268bacf..dd849c2 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -230,8 +230,8 @@
 #error	only one of CONFIG_CONSOLE_CURSOR,CONFIG_VIDEO_SW_CURSOR,CONFIG_VIDEO_HW_CURSOR can be defined
 #endif
 void	console_cursor (int state);
-#define CURSOR_ON  console_cursor(1);
-#define CURSOR_OFF console_cursor(0);
+#define CURSOR_ON  console_cursor(1)
+#define CURSOR_OFF console_cursor(0)
 #define CURSOR_SET
 #ifndef CONFIG_I8042_KBD
 #warning Cursor drawing on/off needs timer function s.a. drivers/input/i8042.c
@@ -248,8 +248,8 @@
 #endif
 #define CURSOR_ON
 #define CURSOR_OFF video_putchar(console_col * VIDEO_FONT_WIDTH,\
-				 console_row * VIDEO_FONT_HEIGHT, ' ');
-#define CURSOR_SET video_set_cursor();
+				 console_row * VIDEO_FONT_HEIGHT, ' ')
+#define CURSOR_SET video_set_cursor()
 #endif /* CONFIG_VIDEO_SW_CURSOR */
 
 
@@ -260,7 +260,7 @@
 #define CURSOR_ON
 #define CURSOR_OFF
 #define CURSOR_SET video_set_hw_cursor(console_col * VIDEO_FONT_WIDTH, \
-		  (console_row * VIDEO_FONT_HEIGHT) + video_logo_height);
+		  (console_row * VIDEO_FONT_HEIGHT) + video_logo_height)
 #endif	/* CONFIG_VIDEO_HW_CURSOR */
 
 #ifdef	CONFIG_VIDEO_LOGO
@@ -651,7 +651,8 @@
 
 static void console_back (void)
 {
-	CURSOR_OFF console_col--;
+	CURSOR_OFF;
+	console_col--;
 
 	if (console_col < 0) {
 		console_col = CONSOLE_COLS - 1;
@@ -674,7 +675,7 @@
 	   is >= CONSOLE_COLS
 	 */
 	if (console_col < CONSOLE_COLS)
-		CURSOR_OFF
+		CURSOR_OFF;
 	console_row++;
 	console_col = 0;
 
@@ -690,7 +691,8 @@
 
 static void console_cr (void)
 {
-	CURSOR_OFF console_col = 0;
+	CURSOR_OFF;
+	console_col = 0;
 }
 
 /*****************************************************************************/
@@ -711,7 +713,8 @@
 		break;
 
 	case 9:		/* tab 8 */
-		CURSOR_OFF console_col |= 0x0008;
+		CURSOR_OFF;
+		console_col |= 0x0008;
 		console_col &= ~0x0007;
 
 		if (console_col >= CONSOLE_COLS)
@@ -734,7 +737,8 @@
 			nl = 0;
 		}
 	}
-CURSOR_SET}
+	CURSOR_SET;
+}
 
 
 /*****************************************************************************/
diff --git a/include/common.h b/include/common.h
index 0a64c71..0686a17 100644
--- a/include/common.h
+++ b/include/common.h
@@ -584,8 +584,6 @@
 uint	dpram_base_align(uint align);
 uint	dpram_alloc(uint size);
 uint	dpram_alloc_align(uint size,uint align);
-void	post_word_store (ulong);
-ulong	post_word_load (void);
 void	bootcount_store (ulong);
 ulong	bootcount_load (void);
 #define BOOTCOUNT_MAGIC		0xB001C041
@@ -730,6 +728,9 @@
 
 #ifdef CONFIG_POST
 #define CONFIG_HAS_POST
+#ifndef CONFIG_POST_ALT_LIST
+#define CONFIG_POST_STD_LIST
+#endif
 #endif
 
 #ifdef CONFIG_INIT_CRITICAL
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 550c462..764f71b 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -109,6 +109,7 @@
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 
+#define CONFIG_PPC4xx_EMAC
 #undef CONFIG_EXT_PHY
 #define CONFIG_NET_MULTI	1
 
@@ -402,6 +403,7 @@
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 
@@ -414,16 +416,6 @@
 					/* last 4 bits of the address	*/
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
-					/* have only 8kB, 16kB is save here	*/
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* ...			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
 /*
  * Init Memory Controller:
  *
@@ -574,17 +566,6 @@
 #define		DIMM_READ_ADDR 0xAB
 #define		DIMM_WRITE_ADDR 0xAA
 
-#define CPC0_PLLMR0  (CNTRL_DCR_BASE+0x0)  /* PLL mode 0 register		*/
-#define CPC0_BOOT    (CNTRL_DCR_BASE+0x1)  /* Chip Clock Status register	*/
-#define CPC0_CR1     (CNTRL_DCR_BASE+0x2)  /* Chip Control 1 register		*/
-#define CPC0_EPRCSR  (CNTRL_DCR_BASE+0x3)  /* EMAC PHY Rcv Clk Src register	*/
-#define CPC0_PLLMR1  (CNTRL_DCR_BASE+0x4)  /* PLL mode 1 register		*/
-#define CPC0_UCR     (CNTRL_DCR_BASE+0x5)  /* UART Control register		*/
-#define CPC0_SRR     (CNTRL_DCR_BASE+0x6)  /* Soft Reset register		*/
-#define CPC0_JTAGID  (CNTRL_DCR_BASE+0x7)  /* JTAG ID register			*/
-#define CPC0_SPARE   (CNTRL_DCR_BASE+0x8)  /* Spare DCR				*/
-#define CPC0_PCI     (CNTRL_DCR_BASE+0x9)  /* PCI Control register		*/
-
 /* Defines for CPC0_PLLMR1 Register fields */
 #define PLL_ACTIVE		0x80000000
 #define CPC0_PLLMR1_SSCS	0x80000000
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index a44d8fa..94cc317 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -81,8 +81,7 @@
 #define CONFIG_SYS_GBL_DATA_SIZE     128	     /* num bytes initial data	*/
 
 #define CONFIG_SYS_GBL_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR    (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET    (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 #define CONFIG_SYS_MONITOR_LEN	      (256 * 1024)   /* Rsrv 256kB for Mon	*/
 #define CONFIG_SYS_MALLOC_LEN	      (128 * 1024)   /* Rsrv 128kB for malloc	*/
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index d805a24..2e63306 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -143,8 +143,7 @@
 #define CONFIG_SYS_GBL_DATA_SIZE     128	     /* num bytes initial data	*/
 
 #define CONFIG_SYS_GBL_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR    (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET    (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 #define CONFIG_SYS_MONITOR_LEN	      (256 * 1024)   /* Rsrv 256kB for Mon	*/
 #define CONFIG_SYS_MALLOC_LEN	      (128 * 1024)   /* Rsrv 128kB for malloc	*/
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index e833e6d..bfff750 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -311,10 +311,6 @@
 /* reserve some memory for POST and BOOT limit info */
 #define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 32)
 
-#ifdef  CONFIG_POST		/* reserve one word for POST Info */
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 4)
-#endif
-
 #ifdef CONFIG_BOOTCOUNT_LIMIT /* reserve 2 word for bootcount limit */
 #define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 12)
 #endif
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index fd2e9a9..bf2247d 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -87,7 +87,7 @@
 #define CONFIG_SYS_INIT_RAM_END	(4 << 10)
 #define CONFIG_SYS_GBL_DATA_SIZE	256	/* num bytes initial data */
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 /*-----------------------------------------------------------------------
  * Serial Port
@@ -374,7 +374,6 @@
 				 CONFIG_SYS_POST_ETHER  |	\
 				 CONFIG_SYS_POST_SPR)
 
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 #define CONFIG_LOGBUFFER
 #define CONFIG_SYS_POST_CACHE_ADDR	0x7fff0000	/* free virtual address     */
 
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 6da18eb..7a6602c 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -126,7 +126,7 @@
 #endif
 
 #ifdef CONFIG_POST
-#define CONFIG__CMD_DIAG
+#define CONFIG_CMD_DIAG
 #endif
 
 
diff --git a/include/configs/XPEDITE1000.h b/include/configs/XPEDITE1000.h
index f76ede3..8b47862 100644
--- a/include/configs/XPEDITE1000.h
+++ b/include/configs/XPEDITE1000.h
@@ -102,8 +102,7 @@
 #define CONFIG_SYS_INIT_RAM_END		0x2000	/* End of used area in RAM */
 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* num bytes initial data */
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 #define CONFIG_SYS_MONITOR_LEN	(512 * 1024)	/* Reserve 512 KB for Mon */
 #define CONFIG_SYS_MALLOC_LEN	(1024 * 1024)	/* Reserved for malloc */
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index b6f909c..39f85ae 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -121,7 +121,13 @@
 #define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #else
-#define	CONFIG_SYS_NO_FLASH		1	/* No NOR on Acadia when NAND-booting	*/
+/*
+ * No NOR-flash on Acadia when NAND-booting. We need to undef the
+ * NOR device-tree fixup code as well, since flash_info is not defined
+ * in this case.
+ */
+#define	CONFIG_SYS_NO_FLASH		1
+#undef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
 #endif
 
 #ifdef CONFIG_ENV_IS_IN_FLASH
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index 75106b4..7038291 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -65,8 +65,7 @@
 #define CONFIG_SYS_GBL_DATA_SIZE   128		    /* num bytes initial data	*/
 
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 #define CONFIG_SYS_MONITOR_LEN	    (256 * 1024)    /* Reserve 256 kB for Mon	*/
 #define CONFIG_SYS_MALLOC_LEN	    (128 * 1024)    /* Reserve 128 kB for malloc*/
diff --git a/include/configs/barco.h b/include/configs/barco.h
index e00f84a..b1af701 100644
--- a/include/configs/barco.h
+++ b/include/configs/barco.h
@@ -136,6 +136,8 @@
 #define CONFIG_LOGBUFFER
 #ifdef	CONFIG_LOGBUFFER
 #define CONFIG_SYS_STDOUT_ADDR		0x1FFC000
+#define CONFIG_SYS_POST_WORD_ADDR	\
+		(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE - 4)
 #else
 #define CONFIG_SYS_STDOUT_ADDR		0x2B9000
 #endif
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index 96704d7..fc9784e 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -265,6 +265,7 @@
 #define FLASH_START_POST_BLOCK	11	/* Should > = 11 */
 #define FLASH_END_POST_BLOCK	71	/* Should < = 71 */
 #endif
+#define CONFIG_SYS_POST_WORD_ADDR	0xFF903FFC
 
 /* These are for board tests */
 #if 0
diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index 4476268..91dcacc 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -50,6 +50,7 @@
 # endif
 # ifdef CONFIG_POST
 #  define CONFIG_CMD_DIAG
+#  define CONFIG_POST_ALT_LIST
 # endif
 # ifdef CONFIG_RTC_BFIN
 #  define CONFIG_CMD_DATE
diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h
index 369b368..26992e7 100644
--- a/include/configs/hcu4.h
+++ b/include/configs/hcu4.h
@@ -72,7 +72,7 @@
 #define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE
 #define CONFIG_SYS_GBL_DATA_SIZE	256		/* num bytes initial data */
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 /*-----------------------------------------------------------------------
  * Serial Port
@@ -192,7 +192,6 @@
 				 CONFIG_SYS_POST_SPR)
 
 #define CONFIG_SYS_POST_UART_TABLE	{UART0_BASE}
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 #undef  CONFIG_LOGBUFFER
 #define CONFIG_SYS_POST_CACHE_ADDR	0x00800000 /* free virtual address	*/
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h
index 10b1e0f..f2ab50c 100644
--- a/include/configs/hcu5.h
+++ b/include/configs/hcu5.h
@@ -83,7 +83,7 @@
 #define CONFIG_SYS_INIT_RAM_END	(4 << 10)
 #define CONFIG_SYS_GBL_DATA_SIZE	256		/* num bytes initial data */
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 /*-----------------------------------------------------------------------
  * Serial Port
@@ -207,9 +207,8 @@
 				 CONFIG_SYS_POST_FPU	   | \
 				 CONFIG_SYS_POST_ETHER	   | \
 				 CONFIG_SYS_POST_SPR)
-#define CONFIG_SYS_POST_UART_TABLE	{UART0_BASE}
 
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_SYS_POST_UART_TABLE	{UART0_BASE}
 #define CONFIG_SYS_POST_CACHE_ADDR	0x7fff0000 /* free virtual address	*/
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index f9cdcbc..d40b7a9 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -190,14 +190,16 @@
 
 /* Use ON-Chip SRAM until RAM will be available */
 #define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
-#ifdef CONFIG_POST
+
 /* preserve space for the post_word at end of on-chip SRAM */
+#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4)
+
+#ifdef CONFIG_POST
 #define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
 #else
 #define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
 #endif
 
-
 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
diff --git a/include/configs/icon.h b/include/configs/icon.h
index 779af25..ad0ca5d 100644
--- a/include/configs/icon.h
+++ b/include/configs/icon.h
@@ -99,8 +99,7 @@
 
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
 					 CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 /*
  * Serial Port
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index c5b1565..69365e6 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -200,14 +200,16 @@
 
 /* Use ON-Chip SRAM until RAM will be available */
 #define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
-#ifdef CONFIG_POST
+
 /* preserve space for the post_word at end of on-chip SRAM */
+#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4)
+
+#ifdef CONFIG_POST
 #define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
 #else
 #define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
 #endif
 
-
 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index 884dd74..e4ccd7d 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -98,8 +98,7 @@
 #define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
 
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 /*-----------------------------------------------------------------------
  * Serial Port
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
index 937d7c5..37eaf8f 100644
--- a/include/configs/kilauea.h
+++ b/include/configs/kilauea.h
@@ -102,11 +102,10 @@
 
 #if defined(CONFIG_SYS_INIT_DCACHE_CS)
 # define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-# define CONFIG_SYS_POST_ALT_WORD_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
+# define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
 #else
 # define CONFIG_SYS_INIT_EXTRA_SIZE	16
 # define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE)
-# define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 4)
 # define CONFIG_SYS_OCM_DATA_ADDR	CONFIG_SYS_INIT_RAM_ADDR
 #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
 
diff --git a/include/configs/korat.h b/include/configs/korat.h
index 0107a7b..55ef4f0 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -85,7 +85,7 @@
 #define CONFIG_SYS_INIT_RAM_END	(4 << 10)
 #define CONFIG_SYS_GBL_DATA_SIZE	256	/* num bytes initial data	*/
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 /*
  * Serial Port
@@ -306,7 +306,6 @@
 				 CONFIG_SYS_POST_SPR	| \
 				 CONFIG_SYS_POST_UART)
 
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 #define CONFIG_LOGBUFFER
 #define CONFIG_SYS_POST_CACHE_ADDR	0xC8000000	/* free virtual address     */
 
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 9df6fc7..72e02f8 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -81,7 +81,7 @@
 #define CONFIG_SYS_GBL_DATA_SIZE	256		/* num bytes initial data*/
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_POST_ALT_WORD_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
+#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
 						/* unused GPT0 COMP reg	*/
 #define CONFIG_SYS_MEM_TOP_HIDE	(4 << 10) /* don't use last 4kbytes	*/
 					/* 440EPx errata CHIP 11	*/
diff --git a/include/configs/makalu.h b/include/configs/makalu.h
index 83a2d4a..905c719 100644
--- a/include/configs/makalu.h
+++ b/include/configs/makalu.h
@@ -100,11 +100,10 @@
 
 #if defined(CONFIG_SYS_INIT_DCACHE_CS)
 # define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-# define CONFIG_SYS_POST_ALT_WORD_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
+# define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
 #else
 # define CONFIG_SYS_INIT_EXTRA_SIZE	16
 # define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE)
-# define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 4)
 # define CONFIG_SYS_OCM_DATA_ADDR	CONFIG_SYS_INIT_RAM_ADDR
 #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
 
diff --git a/include/configs/mcu25.h b/include/configs/mcu25.h
index 6042986..3e04cfe 100644
--- a/include/configs/mcu25.h
+++ b/include/configs/mcu25.h
@@ -72,7 +72,7 @@
 #define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE
 #define CONFIG_SYS_GBL_DATA_SIZE	256		/* num bytes initial data */
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 /*-----------------------------------------------------------------------
  * Serial Port
@@ -193,7 +193,6 @@
 				 CONFIG_SYS_POST_SPR)
 
 #define CONFIG_SYS_POST_UART_TABLE	{UART0_BASE}
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 #undef  CONFIG_LOGBUFFER
 #define CONFIG_SYS_POST_CACHE_ADDR	0x00800000 /* free virtual address	*/
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
diff --git a/include/configs/mpc5121-common.h b/include/configs/mpc5121-common.h
index 96fab20..afae1ab 100644
--- a/include/configs/mpc5121-common.h
+++ b/include/configs/mpc5121-common.h
@@ -30,8 +30,7 @@
 #define CONFIG_SYS_GBL_DATA_SIZE	0x100	/* num bytes of initial data */
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
 					 CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 #define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest region */
 #define CONFIG_SYS_MEMTEST_END		0x00400000
diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h
index 4f59cc6..d11d218 100644
--- a/include/configs/ocotea.h
+++ b/include/configs/ocotea.h
@@ -74,8 +74,7 @@
 #define CONFIG_SYS_GBL_DATA_SIZE   128		    /* num bytes initial data	*/
 
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 /*-----------------------------------------------------------------------
  * Serial Port
diff --git a/include/configs/redwood.h b/include/configs/redwood.h
index 913db94..3c1e882 100644
--- a/include/configs/redwood.h
+++ b/include/configs/redwood.h
@@ -91,8 +91,7 @@
 #define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
 
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 900d1db..988d41f 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -97,7 +97,7 @@
 #define CONFIG_SYS_INIT_RAM_END	(4 << 10)
 #define CONFIG_SYS_GBL_DATA_SIZE	256	/* num bytes initial data	*/
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 /*
  * Serial Port
@@ -353,7 +353,6 @@
 				 CONFIG_SYS_POST_SPR	   | \
 				 CONFIG_SYS_POST_UART)
 
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 #define CONFIG_LOGBUFFER
 #define CONFIG_SYS_POST_CACHE_ADDR	0x7fff0000	/* free virtual address     */
 
diff --git a/include/configs/taishan.h b/include/configs/taishan.h
index ce4a612..faf9e20 100644
--- a/include/configs/taishan.h
+++ b/include/configs/taishan.h
@@ -70,8 +70,7 @@
 #define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data*/
 
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 /*-----------------------------------------------------------------------
  * Serial Port
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index a540355..4e64eec 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -99,8 +99,7 @@
 #define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
 
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 /*-----------------------------------------------------------------------
  * Serial Port
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index 6fbf38a..aa250cc 100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -259,9 +259,10 @@
 #define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 16)
 
 /* extra data in OCM */
-#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 4)
-#define CONFIG_SYS_POST_MAGIC		(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_GBL_DATA_OFFSET - 8)
-#define CONFIG_SYS_POST_VAL		(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_GBL_DATA_OFFSET - 12)
+#define CONFIG_SYS_POST_MAGIC		\
+		(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_GBL_DATA_OFFSET - 8)
+#define CONFIG_SYS_POST_VAL		\
+		(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_GBL_DATA_OFFSET - 12)
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 871ef45..fd94929 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -79,7 +79,7 @@
 void set_working_fdt_addr(void *addr);
 int fdt_resize(void *blob);
 
-int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size);
+int fdt_fixup_nor_flash_size(void *blob);
 
 void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size);
 void fdt_del_node_and_alias(void *blob, const char *alias);
diff --git a/include/post.h b/include/post.h
index 3da959d..625da55 100644
--- a/include/post.h
+++ b/include/post.h
@@ -2,6 +2,10 @@
  * (C) Copyright 2002
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
+ * (C) Copyright 2010
+ * Michael Zaidman, Kodak, michael.zaidman@kodak.com
+ * post_word_{load|store} cleanup.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -25,8 +29,59 @@
 
 #ifndef	__ASSEMBLY__
 #include <common.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+
+#ifdef CONFIG_SYS_POST_WORD_ADDR
+#define _POST_WORD_ADDR	CONFIG_SYS_POST_WORD_ADDR
+#else
+
+#ifdef CONFIG_MPC5xxx
+#define _POST_WORD_ADDR	(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE)
+
+#elif defined(CONFIG_MPC512X)
+#define _POST_WORD_ADDR \
+	(CONFIG_SYS_SRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+
+#elif defined(CONFIG_8xx)
+#define _POST_WORD_ADDR \
+	(((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR)
+
+#elif defined(CONFIG_MPC8260)
+#include <asm/cpm_8260.h>
+#define _POST_WORD_ADDR	(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR)
+
+#elif defined(CONFIG_MPC8360)
+#include <asm/immap_qe.h>
+#define _POST_WORD_ADDR	(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR)
+
+#elif defined (CONFIG_MPC85xx)
+#include <asm/cpm_85xx.h>
+#define _POST_WORD_ADDR	(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR)
+
+#elif defined (CONFIG_4xx)
+#define _POST_WORD_ADDR \
+	(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 #endif
 
+#ifndef _POST_WORD_ADDR
+#error "_POST_WORD_ADDR currently not implemented for this platform!"
+#endif
+#endif /* CONFIG_SYS_POST_WORD_ADDR */
+
+static inline ulong post_word_load (void)
+{
+	return in_le32((volatile void *)(_POST_WORD_ADDR));
+}
+
+static inline void post_word_store (ulong value)
+{
+	out_le32((volatile void *)(_POST_WORD_ADDR), value);
+}
+#endif /* defined (CONFIG_POST) || defined(CONFIG_LOGBUFFER) */
+#endif /* __ASSEMBLY__ */
+
 #ifdef CONFIG_POST
 
 #define POST_POWERON		0x01	/* test runs on power-on booting */
@@ -40,7 +95,7 @@
 #define POST_RAM		0x0200	/* test runs in RAM */
 #define POST_MANUAL		0x0400	/* test runs on diag command */
 #define POST_REBOOT		0x0800	/* test may cause rebooting */
-#define POST_PREREL             0x1000  /* test runs before relocation */
+#define POST_PREREL		0x1000  /* test runs before relocation */
 
 #define POST_CRITICAL		0x2000	/* Use failbootcmd if test failed */
 #define POST_STOP		0x4000	/* Interrupt POST sequence on fail */
diff --git a/post/Makefile b/post/Makefile
index 769e9c6..169d126 100644
--- a/post/Makefile
+++ b/post/Makefile
@@ -26,7 +26,8 @@
 
 LIB				= libpost.a
 GPLIB-$(CONFIG_HAS_POST)	+= libgenpost.a
-COBJS-$(CONFIG_HAS_POST)	+= post.o tests.o
+COBJS-$(CONFIG_HAS_POST)	+= post.o
+COBJS-$(CONFIG_POST_STD_LIST)	+= tests.o
 
 SPLIB-$(CONFIG_HAS_POST) = drivers/libpostdrivers.a
 SPLIB-$(CONFIG_HAS_POST) += $(shell if [ -d lib_$(ARCH) ]; then echo \
diff --git a/post/cpu/ppc4xx/uart.c b/post/cpu/ppc4xx/uart.c
index be217fc..6b61cc1 100644
--- a/post/cpu/ppc4xx/uart.c
+++ b/post/cpu/ppc4xx/uart.c
@@ -4,6 +4,8 @@
  *
  * Author: Igor Lisitsin <igor@emcraft.com>
  *
+ * Copyright 2010, Stefan Roese, DENX Software Engineering, sr@denx.de
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -24,6 +26,9 @@
  */
 
 #include <common.h>
+#include <ppc4xx.h>
+#include <ns16550.h>
+#include <asm/io.h>
 
 /*
  * UART test
@@ -119,32 +124,23 @@
 #define UDIV_MAX        32
 #endif
 
-#define UART_RBR    0x00
-#define UART_THR    0x00
-#define UART_IER    0x01
-#define UART_IIR    0x02
-#define UART_FCR    0x02
-#define UART_LCR    0x03
-#define UART_MCR    0x04
-#define UART_LSR    0x05
-#define UART_MSR    0x06
-#define UART_SCR    0x07
-#define UART_DLL    0x00
-#define UART_DLM    0x01
+DECLARE_GLOBAL_DATA_PTR;
 
-/*
- * Line Status Register.
- */
-#define asyncLSRDataReady1            0x01
-#define asyncLSROverrunError1         0x02
-#define asyncLSRParityError1          0x04
-#define asyncLSRFramingError1         0x08
-#define asyncLSRBreakInterrupt1       0x10
-#define asyncLSRTxHoldEmpty1          0x20
-#define asyncLSRTxShiftEmpty1         0x40
-#define asyncLSRRxFifoError1          0x80
+static void uart_post_init_common(struct NS16550 *com_port, unsigned short bdiv)
+{
+	volatile char val;
 
-DECLARE_GLOBAL_DATA_PTR;
+	out_8(&com_port->lcr, 0x80);	/* set DLAB bit */
+	out_8(&com_port->dll, bdiv);	/* set baudrate divisor */
+	out_8(&com_port->dlm, bdiv >> 8); /* set baudrate divisor */
+	out_8(&com_port->lcr, 0x03);	/* clear DLAB; set 8 bits, no parity */
+	out_8(&com_port->fcr, 0x00);	/* disable FIFO */
+	out_8(&com_port->mcr, 0x10);	/* enable loopback mode */
+	val = in_8(&com_port->lsr);	/* clear line status */
+	val = in_8(&com_port->rbr);	/* read receive buffer */
+	out_8(&com_port->scr, 0x00);	/* set scratchpad */
+	out_8(&com_port->ier, 0x00);	/* set interrupt enable reg */
+}
 
 #if defined(CONFIG_440) || defined(CONFIG_405EX)
 #if !defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
@@ -190,19 +186,18 @@
 }
 #endif
 
-static int uart_post_init (unsigned long dev_base)
+static int uart_post_init (struct NS16550 *com_port)
 {
 	unsigned long reg = 0;
 	unsigned long udiv;
 	unsigned short bdiv;
-	volatile char val;
 #ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
 	unsigned long tmp;
 #endif
 	int i;
 
 	for (i = 0; i < 3500; i++) {
-		if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1)
+		if (in_8(&com_port->lsr) & UART_LSR_THRE)
 			break;
 		udelay (100);
 	}
@@ -239,34 +234,24 @@
 	MTREG(UART3_SDR, reg);
 #endif
 
-	out8(dev_base + UART_LCR, 0x80);	/* set DLAB bit */
-	out8(dev_base + UART_DLL, bdiv);	/* set baudrate divisor */
-	out8(dev_base + UART_DLM, bdiv >> 8);	/* set baudrate divisor */
-	out8(dev_base + UART_LCR, 0x03);	/* clear DLAB; set 8 bits, no parity */
-	out8(dev_base + UART_FCR, 0x00);	/* disable FIFO */
-	out8(dev_base + UART_MCR, 0x10);	/* enable loopback mode */
-	val = in8(dev_base + UART_LSR);		/* clear line status */
-	val = in8(dev_base + UART_RBR);		/* read receive buffer */
-	out8(dev_base + UART_SCR, 0x00);	/* set scratchpad */
-	out8(dev_base + UART_IER, 0x00);	/* set interrupt enable reg */
+	uart_post_init_common(com_port, bdiv);
 
 	return 0;
 }
 
 #else /* CONFIG_440 */
 
-static int uart_post_init (unsigned long dev_base)
+static int uart_post_init (struct NS16550 *com_port)
 {
 	unsigned long reg;
 	unsigned long tmp;
 	unsigned long clk;
 	unsigned long udiv;
 	unsigned short bdiv;
-	volatile char val;
 	int i;
 
 	for (i = 0; i < 3500; i++) {
-		if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1)
+		if (in_8(&com_port->lsr) & UART_LSR_THRE)
 			break;
 		udelay (100);
 	}
@@ -309,59 +294,51 @@
 	bdiv = (clk + tmp / 2) / tmp;
 #endif /* CONFIG_405EZ */
 
-	out8(dev_base + UART_LCR, 0x80);	/* set DLAB bit */
-	out8(dev_base + UART_DLL, bdiv);	/* set baudrate divisor */
-	out8(dev_base + UART_DLM, bdiv >> 8);	/* set baudrate divisor */
-	out8(dev_base + UART_LCR, 0x03);	/* clear DLAB; set 8 bits, no parity */
-	out8(dev_base + UART_FCR, 0x00);	/* disable FIFO */
-	out8(dev_base + UART_MCR, 0x10);	/* enable loopback mode */
-	val = in8(dev_base + UART_LSR);	/* clear line status */
-	val = in8(dev_base + UART_RBR);	/* read receive buffer */
-	out8(dev_base + UART_SCR, 0x00);	/* set scratchpad */
-	out8(dev_base + UART_IER, 0x00);	/* set interrupt enable reg */
+	uart_post_init_common(com_port, bdiv);
 
-	return (0);
+	return 0;
 }
 #endif /* CONFIG_440 */
 
-static void uart_post_putc (unsigned long dev_base, char c)
+static void uart_post_putc (struct NS16550 *com_port, char c)
 {
 	int i;
 
-	out8 (dev_base + UART_THR, c);	/* put character out */
+	out_8(&com_port->thr, c);	/* put character out */
 
 	/* Wait for transfer completion */
 	for (i = 0; i < 3500; i++) {
-		if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1)
+		if (in_8(&com_port->lsr) & UART_LSR_THRE)
 			break;
 		udelay (100);
 	}
 }
 
-static int uart_post_getc (unsigned long dev_base)
+static int uart_post_getc (struct NS16550 *com_port)
 {
 	int i;
 
 	/* Wait for character available */
 	for (i = 0; i < 3500; i++) {
-		if (in8 (dev_base + UART_LSR) & asyncLSRDataReady1)
+		if (in_8(&com_port->lsr) & UART_LSR_DR)
 			break;
 		udelay (100);
 	}
-	return 0xff & in8 (dev_base + UART_RBR);
+
+	return 0xff & in_8(&com_port->rbr);
 }
 
-static int test_ctlr (unsigned long dev_base, int index)
+static int test_ctlr (struct NS16550 *com_port, int index)
 {
 	int res = -1;
 	char test_str[] = "*** UART Test String ***\r\n";
 	int i;
 
-	uart_post_init (dev_base);
+	uart_post_init (com_port);
 
 	for (i = 0; i < sizeof (test_str) - 1; i++) {
-		uart_post_putc (dev_base, test_str[i]);
-		if (uart_post_getc (dev_base) != test_str[i])
+		uart_post_putc (com_port, test_str[i]);
+		if (uart_post_getc (com_port) != test_str[i])
 			goto done;
 	}
 	res = 0;
@@ -377,8 +354,8 @@
 	int i, res = 0;
 	static unsigned long base[] = CONFIG_SYS_POST_UART_TABLE;
 
-	for (i = 0; i < sizeof (base) / sizeof (base[0]); i++) {
-		if (test_ctlr (base[i], i))
+	for (i = 0; i < ARRAY_SIZE(base); i++) {
+		if (test_ctlr((struct NS16550 *)base[i], i))
 			res = -1;
 	}
 	serial_reinit_all ();
diff --git a/tools/setlocalversion b/tools/setlocalversion
index b3f5f28..e11f54f 100755
--- a/tools/setlocalversion
+++ b/tools/setlocalversion
@@ -13,7 +13,8 @@
 	# Do we have an untagged version?
 	if git name-rev --tags HEAD | \
 	   grep -E '^HEAD[[:space:]]+(.*~[0-9]*|undefined)$' > /dev/null; then
-	        git describe | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+	        (git describe || git describe --tags || git describe --all --long) \
+				2>/dev/null | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
 	fi
 
 	# Are there uncommitted changes?