| // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause |
| /* |
| * Copyright (C) 2020, STMicroelectronics - All Rights Reserved |
| */ |
| |
| #include <common.h> |
| #include <console.h> |
| #include <dfu.h> |
| #include <malloc.h> |
| #include <mmc.h> |
| #include <dm/uclass.h> |
| #include <linux/list.h> |
| #include <linux/list_sort.h> |
| #include <linux/sizes.h> |
| |
| #include "stm32prog.h" |
| |
| /* Primary GPT header size for 128 entries : 17kB = 34 LBA of 512B */ |
| #define GPT_HEADER_SZ 34 |
| |
| #define OPT_SELECT BIT(0) |
| #define OPT_EMPTY BIT(1) |
| |
| #define IS_SELECT(part) ((part)->option & OPT_SELECT) |
| #define IS_EMPTY(part) ((part)->option & OPT_EMPTY) |
| |
| #define ALT_BUF_LEN SZ_1K |
| |
| #define ROOTFS_MMC0_UUID \ |
| EFI_GUID(0xE91C4E10, 0x16E6, 0x4C0E, \ |
| 0xBD, 0x0E, 0x77, 0xBE, 0xCF, 0x4A, 0x35, 0x82) |
| |
| #define ROOTFS_MMC1_UUID \ |
| EFI_GUID(0x491F6117, 0x415D, 0x4F53, \ |
| 0x88, 0xC9, 0x6E, 0x0D, 0xE5, 0x4D, 0xEA, 0xC6) |
| |
| #define ROOTFS_MMC2_UUID \ |
| EFI_GUID(0xFD58F1C7, 0xBE0D, 0x4338, \ |
| 0x88, 0xE9, 0xAD, 0x8F, 0x05, 0x0A, 0xEB, 0x18) |
| |
| /* RAW parttion (binary / bootloader) used Linux - reserved UUID */ |
| #define LINUX_RESERVED_UUID "8DA63339-0007-60C0-C436-083AC8230908" |
| |
| /* |
| * unique partition guid (uuid) for partition named "rootfs" |
| * on each MMC instance = SD Card or eMMC |
| * allow fixed kernel bootcmd: "rootf=PARTUID=e91c4e10-..." |
| */ |
| static const efi_guid_t uuid_mmc[3] = { |
| ROOTFS_MMC0_UUID, |
| ROOTFS_MMC1_UUID, |
| ROOTFS_MMC2_UUID |
| }; |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* order of column in flash layout file */ |
| enum stm32prog_col_t { |
| COL_OPTION, |
| COL_ID, |
| COL_NAME, |
| COL_TYPE, |
| COL_IP, |
| COL_OFFSET, |
| COL_NB_STM32 |
| }; |
| |
| char *stm32prog_get_error(struct stm32prog_data *data) |
| { |
| static const char error_msg[] = "Unspecified"; |
| |
| if (strlen(data->error) == 0) |
| strcpy(data->error, error_msg); |
| |
| return data->error; |
| } |
| |
| u8 stm32prog_header_check(struct raw_header_s *raw_header, |
| struct image_header_s *header) |
| { |
| unsigned int i; |
| |
| header->present = 0; |
| header->image_checksum = 0x0; |
| header->image_length = 0x0; |
| |
| if (!raw_header || !header) { |
| pr_debug("%s:no header data\n", __func__); |
| return -1; |
| } |
| if (raw_header->magic_number != |
| (('S' << 0) | ('T' << 8) | ('M' << 16) | (0x32 << 24))) { |
| pr_debug("%s:invalid magic number : 0x%x\n", |
| __func__, raw_header->magic_number); |
| return -2; |
| } |
| /* only header v1.0 supported */ |
| if (raw_header->header_version != 0x00010000) { |
| pr_debug("%s:invalid header version : 0x%x\n", |
| __func__, raw_header->header_version); |
| return -3; |
| } |
| if (raw_header->reserved1 != 0x0 || raw_header->reserved2) { |
| pr_debug("%s:invalid reserved field\n", __func__); |
| return -4; |
| } |
| for (i = 0; i < (sizeof(raw_header->padding) / 4); i++) { |
| if (raw_header->padding[i] != 0) { |
| pr_debug("%s:invalid padding field\n", __func__); |
| return -5; |
| } |
| } |
| header->present = 1; |
| header->image_checksum = le32_to_cpu(raw_header->image_checksum); |
| header->image_length = le32_to_cpu(raw_header->image_length); |
| |
| return 0; |
| } |
| |
| static u32 stm32prog_header_checksum(u32 addr, struct image_header_s *header) |
| { |
| u32 i, checksum; |
| u8 *payload; |
| |
| /* compute checksum on payload */ |
| payload = (u8 *)addr; |
| checksum = 0; |
| for (i = header->image_length; i > 0; i--) |
| checksum += *(payload++); |
| |
| return checksum; |
| } |
| |
| /* FLASHLAYOUT PARSING *****************************************/ |
| static int parse_option(struct stm32prog_data *data, |
| int i, char *p, struct stm32prog_part_t *part) |
| { |
| int result = 0; |
| char *c = p; |
| |
| part->option = 0; |
| if (!strcmp(p, "-")) |
| return 0; |
| |
| while (*c) { |
| switch (*c) { |
| case 'P': |
| part->option |= OPT_SELECT; |
| break; |
| case 'E': |
| part->option |= OPT_EMPTY; |
| break; |
| default: |
| result = -EINVAL; |
| stm32prog_err("Layout line %d: invalid option '%c' in %s)", |
| i, *c, p); |
| return -EINVAL; |
| } |
| c++; |
| } |
| if (!(part->option & OPT_SELECT)) { |
| stm32prog_err("Layout line %d: missing 'P' in option %s", i, p); |
| return -EINVAL; |
| } |
| |
| return result; |
| } |
| |
| static int parse_id(struct stm32prog_data *data, |
| int i, char *p, struct stm32prog_part_t *part) |
| { |
| int result = 0; |
| unsigned long value; |
| |
| result = strict_strtoul(p, 0, &value); |
| part->id = value; |
| if (result || value > PHASE_LAST_USER) { |
| stm32prog_err("Layout line %d: invalid phase value = %s", i, p); |
| result = -EINVAL; |
| } |
| |
| return result; |
| } |
| |
| static int parse_name(struct stm32prog_data *data, |
| int i, char *p, struct stm32prog_part_t *part) |
| { |
| int result = 0; |
| |
| if (strlen(p) < sizeof(part->name)) { |
| strcpy(part->name, p); |
| } else { |
| stm32prog_err("Layout line %d: partition name too long [%d]: %s", |
| i, strlen(p), p); |
| result = -EINVAL; |
| } |
| |
| return result; |
| } |
| |
| static int parse_type(struct stm32prog_data *data, |
| int i, char *p, struct stm32prog_part_t *part) |
| { |
| int result = 0; |
| |
| if (!strcmp(p, "Binary")) { |
| part->part_type = PART_BINARY; |
| } else if (!strcmp(p, "System")) { |
| part->part_type = PART_SYSTEM; |
| } else if (!strcmp(p, "FileSystem")) { |
| part->part_type = PART_FILESYSTEM; |
| } else if (!strcmp(p, "RawImage")) { |
| part->part_type = RAW_IMAGE; |
| } else { |
| result = -EINVAL; |
| } |
| if (result) |
| stm32prog_err("Layout line %d: type parsing error : '%s'", |
| i, p); |
| |
| return result; |
| } |
| |
| static int parse_ip(struct stm32prog_data *data, |
| int i, char *p, struct stm32prog_part_t *part) |
| { |
| int result = 0; |
| unsigned int len = 0; |
| |
| part->dev_id = 0; |
| if (!strcmp(p, "none")) { |
| part->target = STM32PROG_NONE; |
| } else if (!strncmp(p, "mmc", 3)) { |
| part->target = STM32PROG_MMC; |
| len = 3; |
| } else { |
| result = -EINVAL; |
| } |
| if (len) { |
| /* only one digit allowed for device id */ |
| if (strlen(p) != len + 1) { |
| result = -EINVAL; |
| } else { |
| part->dev_id = p[len] - '0'; |
| if (part->dev_id > 9) |
| result = -EINVAL; |
| } |
| } |
| if (result) |
| stm32prog_err("Layout line %d: ip parsing error: '%s'", i, p); |
| |
| return result; |
| } |
| |
| static int parse_offset(struct stm32prog_data *data, |
| int i, char *p, struct stm32prog_part_t *part) |
| { |
| int result = 0; |
| char *tail; |
| |
| part->part_id = 0; |
| part->size = 0; |
| part->addr = simple_strtoull(p, &tail, 0); |
| if (tail == p || *tail != '\0') { |
| stm32prog_err("Layout line %d: invalid offset '%s'", |
| i, p); |
| result = -EINVAL; |
| } |
| |
| return result; |
| } |
| |
| static |
| int (* const parse[COL_NB_STM32])(struct stm32prog_data *data, int i, char *p, |
| struct stm32prog_part_t *part) = { |
| [COL_OPTION] = parse_option, |
| [COL_ID] = parse_id, |
| [COL_NAME] = parse_name, |
| [COL_TYPE] = parse_type, |
| [COL_IP] = parse_ip, |
| [COL_OFFSET] = parse_offset, |
| }; |
| |
| static int parse_flash_layout(struct stm32prog_data *data, |
| ulong addr, |
| ulong size) |
| { |
| int column = 0, part_nb = 0, ret; |
| bool end_of_line, eof; |
| char *p, *start, *last, *col; |
| struct stm32prog_part_t *part; |
| int part_list_size; |
| int i; |
| |
| data->part_nb = 0; |
| |
| /* check if STM32image is detected */ |
| if (!stm32prog_header_check((struct raw_header_s *)addr, |
| &data->header)) { |
| u32 checksum; |
| |
| addr = addr + BL_HEADER_SIZE; |
| size = data->header.image_length; |
| |
| checksum = stm32prog_header_checksum(addr, &data->header); |
| if (checksum != data->header.image_checksum) { |
| stm32prog_err("Layout: invalid checksum : 0x%x expected 0x%x", |
| checksum, data->header.image_checksum); |
| return -EIO; |
| } |
| } |
| if (!size) |
| return -EINVAL; |
| |
| start = (char *)addr; |
| last = start + size; |
| |
| *last = 0x0; /* force null terminated string */ |
| pr_debug("flash layout =\n%s\n", start); |
| |
| /* calculate expected number of partitions */ |
| part_list_size = 1; |
| p = start; |
| while (*p && (p < last)) { |
| if (*p++ == '\n') { |
| part_list_size++; |
| if (p < last && *p == '#') |
| part_list_size--; |
| } |
| } |
| if (part_list_size > PHASE_LAST_USER) { |
| stm32prog_err("Layout: too many partition (%d)", |
| part_list_size); |
| return -1; |
| } |
| part = calloc(sizeof(struct stm32prog_part_t), part_list_size); |
| if (!part) { |
| stm32prog_err("Layout: alloc failed"); |
| return -ENOMEM; |
| } |
| data->part_array = part; |
| |
| /* main parsing loop */ |
| i = 1; |
| eof = false; |
| p = start; |
| col = start; /* 1st column */ |
| end_of_line = false; |
| while (!eof) { |
| switch (*p) { |
| /* CR is ignored and replaced by NULL character */ |
| case '\r': |
| *p = '\0'; |
| p++; |
| continue; |
| case '\0': |
| end_of_line = true; |
| eof = true; |
| break; |
| case '\n': |
| end_of_line = true; |
| break; |
| case '\t': |
| break; |
| case '#': |
| /* comment line is skipped */ |
| if (column == 0 && p == col) { |
| while ((p < last) && *p) |
| if (*p++ == '\n') |
| break; |
| col = p; |
| i++; |
| if (p >= last || !*p) { |
| eof = true; |
| end_of_line = true; |
| } |
| continue; |
| } |
| /* fall through */ |
| /* by default continue with the next character */ |
| default: |
| p++; |
| continue; |
| } |
| |
| /* replace by \0: allow string parsing for each column */ |
| *p = '\0'; |
| p++; |
| if (p >= last) { |
| eof = true; |
| end_of_line = true; |
| } |
| |
| /* skip empty line and multiple TAB in tsv file */ |
| if (strlen(col) == 0) { |
| col = p; |
| /* skip empty line */ |
| if (column == 0 && end_of_line) { |
| end_of_line = false; |
| i++; |
| } |
| continue; |
| } |
| |
| if (column < COL_NB_STM32) { |
| ret = parse[column](data, i, col, part); |
| if (ret) |
| return ret; |
| } |
| |
| /* save the beginning of the next column */ |
| column++; |
| col = p; |
| |
| if (!end_of_line) |
| continue; |
| |
| /* end of the line detected */ |
| end_of_line = false; |
| |
| if (column < COL_NB_STM32) { |
| stm32prog_err("Layout line %d: no enought column", i); |
| return -EINVAL; |
| } |
| column = 0; |
| part_nb++; |
| part++; |
| i++; |
| if (part_nb >= part_list_size) { |
| part = NULL; |
| if (!eof) { |
| stm32prog_err("Layout: no enought memory for %d part", |
| part_nb); |
| return -EINVAL; |
| } |
| } |
| } |
| data->part_nb = part_nb; |
| if (data->part_nb == 0) { |
| stm32prog_err("Layout: no partition found"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int __init part_cmp(void *priv, struct list_head *a, struct list_head *b) |
| { |
| struct stm32prog_part_t *parta, *partb; |
| |
| parta = container_of(a, struct stm32prog_part_t, list); |
| partb = container_of(b, struct stm32prog_part_t, list); |
| |
| return parta->addr > partb->addr ? 1 : -1; |
| } |
| |
| static int init_device(struct stm32prog_data *data, |
| struct stm32prog_dev_t *dev) |
| { |
| struct mmc *mmc = NULL; |
| struct blk_desc *block_dev = NULL; |
| int part_id; |
| u64 first_addr = 0, last_addr = 0; |
| struct stm32prog_part_t *part, *next_part; |
| |
| switch (dev->target) { |
| #ifdef CONFIG_MMC |
| case STM32PROG_MMC: |
| mmc = find_mmc_device(dev->dev_id); |
| if (mmc_init(mmc)) { |
| stm32prog_err("mmc device %d not found", dev->dev_id); |
| return -ENODEV; |
| } |
| block_dev = mmc_get_blk_desc(mmc); |
| if (!block_dev) { |
| stm32prog_err("mmc device %d not probed", dev->dev_id); |
| return -ENODEV; |
| } |
| dev->erase_size = mmc->erase_grp_size * block_dev->blksz; |
| dev->mmc = mmc; |
| |
| /* reserve a full erase group for each GTP headers */ |
| if (mmc->erase_grp_size > GPT_HEADER_SZ) { |
| first_addr = dev->erase_size; |
| last_addr = (u64)(block_dev->lba - |
| mmc->erase_grp_size) * |
| block_dev->blksz; |
| } else { |
| first_addr = (u64)GPT_HEADER_SZ * block_dev->blksz; |
| last_addr = (u64)(block_dev->lba - GPT_HEADER_SZ - 1) * |
| block_dev->blksz; |
| } |
| pr_debug("MMC %d: lba=%ld blksz=%ld\n", dev->dev_id, |
| block_dev->lba, block_dev->blksz); |
| pr_debug(" available address = 0x%llx..0x%llx\n", |
| first_addr, last_addr); |
| break; |
| #endif |
| default: |
| stm32prog_err("unknown device type = %d", dev->target); |
| return -ENODEV; |
| } |
| pr_debug(" erase size = 0x%x\n", dev->erase_size); |
| |
| /* order partition list in offset order */ |
| list_sort(NULL, &dev->part_list, &part_cmp); |
| part_id = 1; |
| pr_debug("id : Opt Phase Name target.n dev.n addr size part_off part_size\n"); |
| list_for_each_entry(part, &dev->part_list, list) { |
| if (part->part_type == RAW_IMAGE) { |
| part->part_id = 0x0; |
| part->addr = 0x0; |
| if (block_dev) |
| part->size = block_dev->lba * block_dev->blksz; |
| else |
| part->size = last_addr; |
| pr_debug("-- : %1d %02x %14s %02d %02d.%02d %08llx %08llx\n", |
| part->option, part->id, part->name, |
| part->part_type, part->target, |
| part->dev_id, part->addr, part->size); |
| continue; |
| } |
| |
| part->part_id = part_id++; |
| |
| /* last partition : size to the end of the device */ |
| if (part->list.next != &dev->part_list) { |
| next_part = |
| container_of(part->list.next, |
| struct stm32prog_part_t, |
| list); |
| if (part->addr < next_part->addr) { |
| part->size = next_part->addr - |
| part->addr; |
| } else { |
| stm32prog_err("%s (0x%x): same address : 0x%llx == %s (0x%x): 0x%llx", |
| part->name, part->id, |
| part->addr, |
| next_part->name, |
| next_part->id, |
| next_part->addr); |
| return -EINVAL; |
| } |
| } else { |
| if (part->addr <= last_addr) { |
| part->size = last_addr - part->addr; |
| } else { |
| stm32prog_err("%s (0x%x): invalid address 0x%llx (max=0x%llx)", |
| part->name, part->id, |
| part->addr, last_addr); |
| return -EINVAL; |
| } |
| } |
| if (part->addr < first_addr) { |
| stm32prog_err("%s (0x%x): invalid address 0x%llx (min=0x%llx)", |
| part->name, part->id, |
| part->addr, first_addr); |
| return -EINVAL; |
| } |
| |
| if ((part->addr & ((u64)part->dev->erase_size - 1)) != 0) { |
| stm32prog_err("%s (0x%x): not aligned address : 0x%llx on erase size 0x%x", |
| part->name, part->id, part->addr, |
| part->dev->erase_size); |
| return -EINVAL; |
| } |
| pr_debug("%02d : %1d %02x %14s %02d %02d.%02d %08llx %08llx", |
| part->part_id, part->option, part->id, part->name, |
| part->part_type, part->target, |
| part->dev_id, part->addr, part->size); |
| } |
| return 0; |
| } |
| |
| static int treat_partition_list(struct stm32prog_data *data) |
| { |
| int i, j; |
| struct stm32prog_part_t *part; |
| |
| for (j = 0; j < STM32PROG_MAX_DEV; j++) { |
| data->dev[j].target = STM32PROG_NONE; |
| INIT_LIST_HEAD(&data->dev[j].part_list); |
| } |
| |
| for (i = 0; i < data->part_nb; i++) { |
| part = &data->part_array[i]; |
| part->alt_id = -1; |
| |
| /* skip partition with IP="none" */ |
| if (part->target == STM32PROG_NONE) { |
| if (IS_SELECT(part)) { |
| stm32prog_err("Layout: selected none phase = 0x%x", |
| part->id); |
| return -EINVAL; |
| } |
| continue; |
| } |
| |
| if (part->id == PHASE_FLASHLAYOUT || |
| part->id > PHASE_LAST_USER) { |
| stm32prog_err("Layout: invalid phase = 0x%x", |
| part->id); |
| return -EINVAL; |
| } |
| for (j = i + 1; j < data->part_nb; j++) { |
| if (part->id == data->part_array[j].id) { |
| stm32prog_err("Layout: duplicated phase 0x%x at line %d and %d", |
| part->id, i, j); |
| return -EINVAL; |
| } |
| } |
| for (j = 0; j < STM32PROG_MAX_DEV; j++) { |
| if (data->dev[j].target == STM32PROG_NONE) { |
| /* new device found */ |
| data->dev[j].target = part->target; |
| data->dev[j].dev_id = part->dev_id; |
| data->dev_nb++; |
| break; |
| } else if ((part->target == data->dev[j].target) && |
| (part->dev_id == data->dev[j].dev_id)) { |
| break; |
| } |
| } |
| if (j == STM32PROG_MAX_DEV) { |
| stm32prog_err("Layout: too many device"); |
| return -EINVAL; |
| } |
| part->dev = &data->dev[j]; |
| list_add_tail(&part->list, &data->dev[j].part_list); |
| } |
| |
| return 0; |
| } |
| |
| static int create_partitions(struct stm32prog_data *data) |
| { |
| #ifdef CONFIG_MMC |
| int offset = 0; |
| const int buflen = SZ_8K; |
| char *buf; |
| char uuid[UUID_STR_LEN + 1]; |
| unsigned char *uuid_bin; |
| unsigned int mmc_id; |
| int i; |
| bool rootfs_found; |
| struct stm32prog_part_t *part; |
| |
| buf = malloc(buflen); |
| if (!buf) |
| return -ENOMEM; |
| |
| puts("partitions : "); |
| /* initialize the selected device */ |
| for (i = 0; i < data->dev_nb; i++) { |
| offset = 0; |
| rootfs_found = false; |
| memset(buf, 0, buflen); |
| |
| list_for_each_entry(part, &data->dev[i].part_list, list) { |
| /* skip Raw Image */ |
| if (part->part_type == RAW_IMAGE) |
| continue; |
| |
| if (offset + 100 > buflen) { |
| pr_debug("\n%s: buffer too small, %s skippped", |
| __func__, part->name); |
| continue; |
| } |
| |
| if (!offset) |
| offset += sprintf(buf, "gpt write mmc %d \"", |
| data->dev[i].dev_id); |
| |
| offset += snprintf(buf + offset, buflen - offset, |
| "name=%s,start=0x%llx,size=0x%llx", |
| part->name, |
| part->addr, |
| part->size); |
| |
| if (part->part_type == PART_BINARY) |
| offset += snprintf(buf + offset, |
| buflen - offset, |
| ",type=" |
| LINUX_RESERVED_UUID); |
| else |
| offset += snprintf(buf + offset, |
| buflen - offset, |
| ",type=linux"); |
| |
| if (part->part_type == PART_SYSTEM) |
| offset += snprintf(buf + offset, |
| buflen - offset, |
| ",bootable"); |
| |
| if (!rootfs_found && !strcmp(part->name, "rootfs")) { |
| mmc_id = part->dev_id; |
| rootfs_found = true; |
| if (mmc_id < ARRAY_SIZE(uuid_mmc)) { |
| uuid_bin = |
| (unsigned char *)uuid_mmc[mmc_id].b; |
| uuid_bin_to_str(uuid_bin, uuid, |
| UUID_STR_FORMAT_GUID); |
| offset += snprintf(buf + offset, |
| buflen - offset, |
| ",uuid=%s", uuid); |
| } |
| } |
| |
| offset += snprintf(buf + offset, buflen - offset, ";"); |
| } |
| |
| if (offset) { |
| offset += snprintf(buf + offset, buflen - offset, "\""); |
| pr_debug("\ncmd: %s\n", buf); |
| if (run_command(buf, 0)) { |
| stm32prog_err("GPT partitionning fail: %s", |
| buf); |
| free(buf); |
| |
| return -1; |
| } |
| } |
| |
| if (data->dev[i].mmc) |
| part_init(mmc_get_blk_desc(data->dev[i].mmc)); |
| |
| #ifdef DEBUG |
| sprintf(buf, "gpt verify mmc %d", data->dev[i].dev_id); |
| pr_debug("\ncmd: %s", buf); |
| if (run_command(buf, 0)) |
| printf("fail !\n"); |
| else |
| printf("OK\n"); |
| |
| sprintf(buf, "part list mmc %d", data->dev[i].dev_id); |
| run_command(buf, 0); |
| #endif |
| } |
| puts("done\n"); |
| |
| free(buf); |
| #endif |
| |
| return 0; |
| } |
| |
| static int stm32prog_alt_add(struct stm32prog_data *data, |
| struct dfu_entity *dfu, |
| struct stm32prog_part_t *part) |
| { |
| int ret = 0; |
| int offset = 0; |
| char devstr[10]; |
| char dfustr[10]; |
| char buf[ALT_BUF_LEN]; |
| u32 size; |
| char multiplier, type; |
| |
| /* max 3 digit for sector size */ |
| if (part->size > SZ_1M) { |
| size = (u32)(part->size / SZ_1M); |
| multiplier = 'M'; |
| } else if (part->size > SZ_1K) { |
| size = (u32)(part->size / SZ_1K); |
| multiplier = 'K'; |
| } else { |
| size = (u32)part->size; |
| multiplier = 'B'; |
| } |
| if (IS_SELECT(part) && !IS_EMPTY(part)) |
| type = 'e'; /*Readable and Writeable*/ |
| else |
| type = 'a';/*Readable*/ |
| |
| memset(buf, 0, sizeof(buf)); |
| offset = snprintf(buf, ALT_BUF_LEN - offset, |
| "@%s/0x%02x/1*%d%c%c ", |
| part->name, part->id, |
| size, multiplier, type); |
| |
| if (part->part_type == RAW_IMAGE) { |
| u64 dfu_size; |
| |
| if (part->dev->target == STM32PROG_MMC) |
| dfu_size = part->size / part->dev->mmc->read_bl_len; |
| else |
| dfu_size = part->size; |
| offset += snprintf(buf + offset, ALT_BUF_LEN - offset, |
| "raw 0x0 0x%llx", dfu_size); |
| } else { |
| offset += snprintf(buf + offset, |
| ALT_BUF_LEN - offset, |
| "part"); |
| /* dev_id requested by DFU MMC */ |
| if (part->target == STM32PROG_MMC) |
| offset += snprintf(buf + offset, ALT_BUF_LEN - offset, |
| " %d", part->dev_id); |
| offset += snprintf(buf + offset, ALT_BUF_LEN - offset, |
| " %d;", part->part_id); |
| } |
| switch (part->target) { |
| #ifdef CONFIG_MMC |
| case STM32PROG_MMC: |
| sprintf(dfustr, "mmc"); |
| sprintf(devstr, "%d", part->dev_id); |
| break; |
| #endif |
| default: |
| stm32prog_err("invalid target: %d", part->target); |
| return -ENODEV; |
| } |
| pr_debug("dfu_alt_add(%s,%s,%s)\n", dfustr, devstr, buf); |
| ret = dfu_alt_add(dfu, dfustr, devstr, buf); |
| pr_debug("dfu_alt_add(%s,%s,%s) result %d\n", |
| dfustr, devstr, buf, ret); |
| |
| return ret; |
| } |
| |
| static int stm32prog_alt_add_virt(struct dfu_entity *dfu, |
| char *name, int phase, int size) |
| { |
| int ret = 0; |
| char devstr[4]; |
| char buf[ALT_BUF_LEN]; |
| |
| sprintf(devstr, "%d", phase); |
| sprintf(buf, "@%s/0x%02x/1*%dBe", name, phase, size); |
| ret = dfu_alt_add(dfu, "virt", devstr, buf); |
| pr_debug("dfu_alt_add(virt,%s,%s) result %d\n", devstr, buf, ret); |
| |
| return ret; |
| } |
| |
| static int dfu_init_entities(struct stm32prog_data *data) |
| { |
| int ret = 0; |
| int phase, i, alt_id; |
| struct stm32prog_part_t *part; |
| struct dfu_entity *dfu; |
| int alt_nb; |
| |
| alt_nb = 1; /* number of virtual = CMD */ |
| if (data->part_nb == 0) |
| alt_nb++; /* +1 for FlashLayout */ |
| else |
| for (i = 0; i < data->part_nb; i++) { |
| if (data->part_array[i].target != STM32PROG_NONE) |
| alt_nb++; |
| } |
| |
| if (dfu_alt_init(alt_nb, &dfu)) |
| return -ENODEV; |
| |
| puts("DFU alt info setting: "); |
| if (data->part_nb) { |
| alt_id = 0; |
| for (phase = 1; |
| (phase <= PHASE_LAST_USER) && |
| (alt_id < alt_nb) && !ret; |
| phase++) { |
| /* ordering alt setting by phase id */ |
| part = NULL; |
| for (i = 0; i < data->part_nb; i++) { |
| if (phase == data->part_array[i].id) { |
| part = &data->part_array[i]; |
| break; |
| } |
| } |
| if (!part) |
| continue; |
| if (part->target == STM32PROG_NONE) |
| continue; |
| part->alt_id = alt_id; |
| alt_id++; |
| |
| ret = stm32prog_alt_add(data, dfu, part); |
| } |
| } else { |
| char buf[ALT_BUF_LEN]; |
| |
| sprintf(buf, "@FlashLayout/0x%02x/1*256Ke ram %x 40000", |
| PHASE_FLASHLAYOUT, STM32_DDR_BASE); |
| ret = dfu_alt_add(dfu, "ram", NULL, buf); |
| pr_debug("dfu_alt_add(ram, NULL,%s) result %d\n", buf, ret); |
| } |
| |
| if (!ret) |
| ret = stm32prog_alt_add_virt(dfu, "virtual", PHASE_CMD, 512); |
| |
| if (ret) |
| stm32prog_err("dfu init failed: %d", ret); |
| puts("done\n"); |
| |
| #ifdef DEBUG |
| dfu_show_entities(); |
| #endif |
| return ret; |
| } |
| |
| static void stm32prog_end_phase(struct stm32prog_data *data) |
| { |
| if (data->phase == PHASE_FLASHLAYOUT) { |
| if (parse_flash_layout(data, STM32_DDR_BASE, 0)) |
| stm32prog_err("Layout: invalid FlashLayout"); |
| return; |
| } |
| |
| if (!data->cur_part) |
| return; |
| } |
| |
| void stm32prog_do_reset(struct stm32prog_data *data) |
| { |
| if (data->phase == PHASE_RESET) { |
| data->phase = PHASE_DO_RESET; |
| puts("Reset requested\n"); |
| } |
| } |
| |
| void stm32prog_next_phase(struct stm32prog_data *data) |
| { |
| int phase, i; |
| struct stm32prog_part_t *part; |
| bool found; |
| |
| phase = data->phase; |
| switch (phase) { |
| case PHASE_RESET: |
| case PHASE_END: |
| case PHASE_DO_RESET: |
| return; |
| } |
| |
| /* found next selected partition */ |
| data->cur_part = NULL; |
| data->phase = PHASE_END; |
| found = false; |
| do { |
| phase++; |
| if (phase > PHASE_LAST_USER) |
| break; |
| for (i = 0; i < data->part_nb; i++) { |
| part = &data->part_array[i]; |
| if (part->id == phase) { |
| if (IS_SELECT(part) && !IS_EMPTY(part)) { |
| data->cur_part = part; |
| data->phase = phase; |
| found = true; |
| } |
| break; |
| } |
| } |
| } while (!found); |
| |
| if (data->phase == PHASE_END) |
| puts("Phase=END\n"); |
| } |
| |
| static void stm32prog_devices_init(struct stm32prog_data *data) |
| { |
| int i; |
| int ret; |
| |
| ret = treat_partition_list(data); |
| if (ret) |
| goto error; |
| |
| /* initialize the selected device */ |
| for (i = 0; i < data->dev_nb; i++) { |
| ret = init_device(data, &data->dev[i]); |
| if (ret) |
| goto error; |
| } |
| |
| ret = create_partitions(data); |
| if (ret) |
| goto error; |
| |
| return; |
| |
| error: |
| data->part_nb = 0; |
| } |
| |
| int stm32prog_dfu_init(struct stm32prog_data *data) |
| { |
| /* init device if no error */ |
| if (data->part_nb) |
| stm32prog_devices_init(data); |
| |
| if (data->part_nb) |
| stm32prog_next_phase(data); |
| |
| /* prepare DFU for device read/write */ |
| dfu_free_entities(); |
| return dfu_init_entities(data); |
| } |
| |
| int stm32prog_init(struct stm32prog_data *data, ulong addr, ulong size) |
| { |
| memset(data, 0x0, sizeof(*data)); |
| data->phase = PHASE_FLASHLAYOUT; |
| |
| return parse_flash_layout(data, addr, size); |
| } |
| |
| void stm32prog_clean(struct stm32prog_data *data) |
| { |
| /* clean */ |
| dfu_free_entities(); |
| free(data->part_array); |
| free(data->header_data); |
| } |
| |
| /* DFU callback: used after serial and direct DFU USB access */ |
| void dfu_flush_callback(struct dfu_entity *dfu) |
| { |
| if (!stm32prog_data) |
| return; |
| |
| if (dfu->dev_type == DFU_DEV_RAM) { |
| if (dfu->alt == 0 && |
| stm32prog_data->phase == PHASE_FLASHLAYOUT) { |
| stm32prog_end_phase(stm32prog_data); |
| /* waiting DFU DETACH for reenumeration */ |
| } |
| } |
| |
| if (!stm32prog_data->cur_part) |
| return; |
| |
| if (dfu->alt == stm32prog_data->cur_part->alt_id) { |
| stm32prog_end_phase(stm32prog_data); |
| stm32prog_next_phase(stm32prog_data); |
| } |
| } |
| |
| void dfu_initiated_callback(struct dfu_entity *dfu) |
| { |
| if (!stm32prog_data) |
| return; |
| |
| if (!stm32prog_data->cur_part) |
| return; |
| |
| /* force the saved offset for the current partition */ |
| if (dfu->alt == stm32prog_data->cur_part->alt_id) { |
| dfu->offset = stm32prog_data->offset; |
| pr_debug("dfu offset = 0x%llx\n", dfu->offset); |
| } |
| } |