| /* |
| * EFI device path from u-boot device-model mapping |
| * |
| * (C) Copyright 2017 Rob Clark |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <blk.h> |
| #include <dm.h> |
| #include <usb.h> |
| #include <mmc.h> |
| #include <efi_loader.h> |
| #include <inttypes.h> |
| #include <part.h> |
| |
| /* template END node: */ |
| static const struct efi_device_path END = { |
| .type = DEVICE_PATH_TYPE_END, |
| .sub_type = DEVICE_PATH_SUB_TYPE_END, |
| .length = sizeof(END), |
| }; |
| |
| #define U_BOOT_GUID \ |
| EFI_GUID(0xe61d73b9, 0xa384, 0x4acc, \ |
| 0xae, 0xab, 0x82, 0xe8, 0x28, 0xf3, 0x62, 0x8b) |
| |
| /* template ROOT node: */ |
| static const struct efi_device_path_vendor ROOT = { |
| .dp = { |
| .type = DEVICE_PATH_TYPE_HARDWARE_DEVICE, |
| .sub_type = DEVICE_PATH_SUB_TYPE_VENDOR, |
| .length = sizeof(ROOT), |
| }, |
| .guid = U_BOOT_GUID, |
| }; |
| |
| static void *dp_alloc(size_t sz) |
| { |
| void *buf; |
| |
| if (efi_allocate_pool(EFI_ALLOCATE_ANY_PAGES, sz, &buf) != EFI_SUCCESS) |
| return NULL; |
| |
| return buf; |
| } |
| |
| /* |
| * Iterate to next block in device-path, terminating (returning NULL) |
| * at /End* node. |
| */ |
| struct efi_device_path *efi_dp_next(const struct efi_device_path *dp) |
| { |
| if (dp == NULL) |
| return NULL; |
| if (dp->type == DEVICE_PATH_TYPE_END) |
| return NULL; |
| dp = ((void *)dp) + dp->length; |
| if (dp->type == DEVICE_PATH_TYPE_END) |
| return NULL; |
| return (struct efi_device_path *)dp; |
| } |
| |
| /* |
| * Compare two device-paths, stopping when the shorter of the two hits |
| * an End* node. This is useful to, for example, compare a device-path |
| * representing a device with one representing a file on the device, or |
| * a device with a parent device. |
| */ |
| int efi_dp_match(struct efi_device_path *a, struct efi_device_path *b) |
| { |
| while (1) { |
| int ret; |
| |
| ret = memcmp(&a->length, &b->length, sizeof(a->length)); |
| if (ret) |
| return ret; |
| |
| ret = memcmp(a, b, a->length); |
| if (ret) |
| return ret; |
| |
| a = efi_dp_next(a); |
| b = efi_dp_next(b); |
| |
| if (!a || !b) |
| return 0; |
| } |
| } |
| |
| |
| /* |
| * See UEFI spec (section 3.1.2, about short-form device-paths.. |
| * tl;dr: we can have a device-path that starts with a USB WWID |
| * or USB Class node, and a few other cases which don't encode |
| * the full device path with bus hierarchy: |
| * |
| * - MESSAGING:USB_WWID |
| * - MESSAGING:USB_CLASS |
| * - MEDIA:FILE_PATH |
| * - MEDIA:HARD_DRIVE |
| * - MESSAGING:URI |
| */ |
| static struct efi_device_path *shorten_path(struct efi_device_path *dp) |
| { |
| while (dp) { |
| /* |
| * TODO: Add MESSAGING:USB_WWID and MESSAGING:URI.. |
| * in practice fallback.efi just uses MEDIA:HARD_DRIVE |
| * so not sure when we would see these other cases. |
| */ |
| if (EFI_DP_TYPE(dp, MESSAGING_DEVICE, MSG_USB_CLASS) || |
| EFI_DP_TYPE(dp, MEDIA_DEVICE, HARD_DRIVE_PATH) || |
| EFI_DP_TYPE(dp, MEDIA_DEVICE, FILE_PATH)) |
| return dp; |
| |
| dp = efi_dp_next(dp); |
| } |
| |
| return dp; |
| } |
| |
| static struct efi_object *find_obj(struct efi_device_path *dp, bool short_path, |
| struct efi_device_path **rem) |
| { |
| struct efi_object *efiobj; |
| |
| list_for_each_entry(efiobj, &efi_obj_list, link) { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(efiobj->protocols); i++) { |
| struct efi_handler *handler = &efiobj->protocols[i]; |
| struct efi_device_path *obj_dp; |
| |
| if (!handler->guid) |
| break; |
| |
| if (guidcmp(handler->guid, &efi_guid_device_path)) |
| continue; |
| |
| obj_dp = handler->protocol_interface; |
| |
| do { |
| if (efi_dp_match(dp, obj_dp) == 0) { |
| if (rem) { |
| *rem = ((void *)dp) + |
| efi_dp_size(obj_dp); |
| } |
| return efiobj; |
| } |
| |
| obj_dp = shorten_path(efi_dp_next(obj_dp)); |
| } while (short_path && obj_dp); |
| } |
| } |
| |
| return NULL; |
| } |
| |
| |
| /* |
| * Find an efiobj from device-path, if 'rem' is not NULL, returns the |
| * remaining part of the device path after the matched object. |
| */ |
| struct efi_object *efi_dp_find_obj(struct efi_device_path *dp, |
| struct efi_device_path **rem) |
| { |
| struct efi_object *efiobj; |
| |
| efiobj = find_obj(dp, false, rem); |
| |
| if (!efiobj) |
| efiobj = find_obj(dp, true, rem); |
| |
| return efiobj; |
| } |
| |
| /* return size not including End node: */ |
| unsigned efi_dp_size(const struct efi_device_path *dp) |
| { |
| unsigned sz = 0; |
| |
| while (dp) { |
| sz += dp->length; |
| dp = efi_dp_next(dp); |
| } |
| |
| return sz; |
| } |
| |
| struct efi_device_path *efi_dp_dup(const struct efi_device_path *dp) |
| { |
| struct efi_device_path *ndp; |
| unsigned sz = efi_dp_size(dp) + sizeof(END); |
| |
| if (!dp) |
| return NULL; |
| |
| ndp = dp_alloc(sz); |
| memcpy(ndp, dp, sz); |
| |
| return ndp; |
| } |
| |
| struct efi_device_path *efi_dp_append(const struct efi_device_path *dp1, |
| const struct efi_device_path *dp2) |
| { |
| struct efi_device_path *ret; |
| |
| if (!dp1) { |
| ret = efi_dp_dup(dp2); |
| } else if (!dp2) { |
| ret = efi_dp_dup(dp1); |
| } else { |
| /* both dp1 and dp2 are non-null */ |
| unsigned sz1 = efi_dp_size(dp1); |
| unsigned sz2 = efi_dp_size(dp2); |
| void *p = dp_alloc(sz1 + sz2 + sizeof(END)); |
| memcpy(p, dp1, sz1); |
| memcpy(p + sz1, dp2, sz2); |
| memcpy(p + sz1 + sz2, &END, sizeof(END)); |
| ret = p; |
| } |
| |
| return ret; |
| } |
| |
| struct efi_device_path *efi_dp_append_node(const struct efi_device_path *dp, |
| const struct efi_device_path *node) |
| { |
| struct efi_device_path *ret; |
| |
| if (!node && !dp) { |
| ret = efi_dp_dup(&END); |
| } else if (!node) { |
| ret = efi_dp_dup(dp); |
| } else if (!dp) { |
| unsigned sz = node->length; |
| void *p = dp_alloc(sz + sizeof(END)); |
| memcpy(p, node, sz); |
| memcpy(p + sz, &END, sizeof(END)); |
| ret = p; |
| } else { |
| /* both dp and node are non-null */ |
| unsigned sz = efi_dp_size(dp); |
| void *p = dp_alloc(sz + node->length + sizeof(END)); |
| memcpy(p, dp, sz); |
| memcpy(p + sz, node, node->length); |
| memcpy(p + sz + node->length, &END, sizeof(END)); |
| ret = p; |
| } |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_DM |
| /* size of device-path not including END node for device and all parents |
| * up to the root device. |
| */ |
| static unsigned dp_size(struct udevice *dev) |
| { |
| if (!dev || !dev->driver) |
| return sizeof(ROOT); |
| |
| switch (dev->driver->id) { |
| case UCLASS_ROOT: |
| case UCLASS_SIMPLE_BUS: |
| /* stop traversing parents at this point: */ |
| return sizeof(ROOT); |
| case UCLASS_MMC: |
| return dp_size(dev->parent) + |
| sizeof(struct efi_device_path_sd_mmc_path); |
| case UCLASS_MASS_STORAGE: |
| case UCLASS_USB_HUB: |
| return dp_size(dev->parent) + |
| sizeof(struct efi_device_path_usb_class); |
| default: |
| /* just skip over unknown classes: */ |
| return dp_size(dev->parent); |
| } |
| } |
| |
| static void *dp_fill(void *buf, struct udevice *dev) |
| { |
| if (!dev || !dev->driver) |
| return buf; |
| |
| switch (dev->driver->id) { |
| case UCLASS_ROOT: |
| case UCLASS_SIMPLE_BUS: { |
| /* stop traversing parents at this point: */ |
| struct efi_device_path_vendor *vdp = buf; |
| *vdp = ROOT; |
| return &vdp[1]; |
| } |
| #if defined(CONFIG_DM_MMC) && defined(CONFIG_MMC) |
| case UCLASS_MMC: { |
| struct efi_device_path_sd_mmc_path *sddp = |
| dp_fill(buf, dev->parent); |
| struct mmc *mmc = mmc_get_mmc_dev(dev); |
| struct blk_desc *desc = mmc_get_blk_desc(mmc); |
| |
| sddp->dp.type = DEVICE_PATH_TYPE_MESSAGING_DEVICE; |
| sddp->dp.sub_type = (desc->if_type == IF_TYPE_MMC) ? |
| DEVICE_PATH_SUB_TYPE_MSG_MMC : |
| DEVICE_PATH_SUB_TYPE_MSG_SD; |
| sddp->dp.length = sizeof(*sddp); |
| sddp->slot_number = dev->seq; |
| |
| return &sddp[1]; |
| } |
| #endif |
| case UCLASS_MASS_STORAGE: |
| case UCLASS_USB_HUB: { |
| struct efi_device_path_usb_class *udp = |
| dp_fill(buf, dev->parent); |
| struct usb_device *udev = dev_get_parent_priv(dev); |
| struct usb_device_descriptor *desc = &udev->descriptor; |
| |
| udp->dp.type = DEVICE_PATH_TYPE_MESSAGING_DEVICE; |
| udp->dp.sub_type = DEVICE_PATH_SUB_TYPE_MSG_USB_CLASS; |
| udp->dp.length = sizeof(*udp); |
| udp->vendor_id = desc->idVendor; |
| udp->product_id = desc->idProduct; |
| udp->device_class = desc->bDeviceClass; |
| udp->device_subclass = desc->bDeviceSubClass; |
| udp->device_protocol = desc->bDeviceProtocol; |
| |
| return &udp[1]; |
| } |
| default: |
| debug("unhandled device class: %s (%u)\n", |
| dev->name, dev->driver->id); |
| return dp_fill(buf, dev->parent); |
| } |
| } |
| |
| /* Construct a device-path from a device: */ |
| struct efi_device_path *efi_dp_from_dev(struct udevice *dev) |
| { |
| void *buf, *start; |
| |
| start = buf = dp_alloc(dp_size(dev) + sizeof(END)); |
| buf = dp_fill(buf, dev); |
| *((struct efi_device_path *)buf) = END; |
| |
| return start; |
| } |
| #endif |
| |
| static unsigned dp_part_size(struct blk_desc *desc, int part) |
| { |
| unsigned dpsize; |
| |
| #ifdef CONFIG_BLK |
| dpsize = dp_size(desc->bdev->parent); |
| #else |
| dpsize = sizeof(ROOT) + sizeof(struct efi_device_path_usb); |
| #endif |
| |
| if (part == 0) /* the actual disk, not a partition */ |
| return dpsize; |
| |
| if (desc->part_type == PART_TYPE_ISO) |
| dpsize += sizeof(struct efi_device_path_cdrom_path); |
| else |
| dpsize += sizeof(struct efi_device_path_hard_drive_path); |
| |
| return dpsize; |
| } |
| |
| static void *dp_part_fill(void *buf, struct blk_desc *desc, int part) |
| { |
| disk_partition_t info; |
| |
| #ifdef CONFIG_BLK |
| buf = dp_fill(buf, desc->bdev->parent); |
| #else |
| /* |
| * We *could* make a more accurate path, by looking at if_type |
| * and handling all the different cases like we do for non- |
| * legacy (ie CONFIG_BLK=y) case. But most important thing |
| * is just to have a unique device-path for if_type+devnum. |
| * So map things to a fictional USB device: |
| */ |
| struct efi_device_path_usb *udp; |
| |
| memcpy(buf, &ROOT, sizeof(ROOT)); |
| buf += sizeof(ROOT); |
| |
| udp = buf; |
| udp->dp.type = DEVICE_PATH_TYPE_MESSAGING_DEVICE; |
| udp->dp.sub_type = DEVICE_PATH_SUB_TYPE_MSG_USB; |
| udp->dp.length = sizeof(*udp); |
| udp->parent_port_number = desc->if_type; |
| udp->usb_interface = desc->devnum; |
| buf = &udp[1]; |
| #endif |
| |
| if (part == 0) /* the actual disk, not a partition */ |
| return buf; |
| |
| part_get_info(desc, part, &info); |
| |
| if (desc->part_type == PART_TYPE_ISO) { |
| struct efi_device_path_cdrom_path *cddp = buf; |
| |
| cddp->boot_entry = part - 1; |
| cddp->dp.type = DEVICE_PATH_TYPE_MEDIA_DEVICE; |
| cddp->dp.sub_type = DEVICE_PATH_SUB_TYPE_CDROM_PATH; |
| cddp->dp.length = sizeof(*cddp); |
| cddp->partition_start = info.start; |
| cddp->partition_end = info.size; |
| |
| buf = &cddp[1]; |
| } else { |
| struct efi_device_path_hard_drive_path *hddp = buf; |
| |
| hddp->dp.type = DEVICE_PATH_TYPE_MEDIA_DEVICE; |
| hddp->dp.sub_type = DEVICE_PATH_SUB_TYPE_HARD_DRIVE_PATH; |
| hddp->dp.length = sizeof(*hddp); |
| hddp->partition_number = part - 1; |
| hddp->partition_start = info.start; |
| hddp->partition_end = info.size; |
| if (desc->part_type == PART_TYPE_EFI) |
| hddp->partmap_type = 2; |
| else |
| hddp->partmap_type = 1; |
| hddp->signature_type = desc->sig_type; |
| if (hddp->signature_type != 0) |
| memcpy(hddp->partition_signature, &desc->guid_sig, |
| sizeof(hddp->partition_signature)); |
| |
| buf = &hddp[1]; |
| } |
| |
| return buf; |
| } |
| |
| |
| /* Construct a device-path from a partition on a blk device: */ |
| struct efi_device_path *efi_dp_from_part(struct blk_desc *desc, int part) |
| { |
| void *buf, *start; |
| |
| start = buf = dp_alloc(dp_part_size(desc, part) + sizeof(END)); |
| |
| buf = dp_part_fill(buf, desc, part); |
| |
| *((struct efi_device_path *)buf) = END; |
| |
| return start; |
| } |
| |
| /* convert path to an UEFI style path (ie. DOS style backslashes and utf16) */ |
| static void path_to_uefi(u16 *uefi, const char *path) |
| { |
| while (*path) { |
| char c = *(path++); |
| if (c == '/') |
| c = '\\'; |
| *(uefi++) = c; |
| } |
| *uefi = '\0'; |
| } |
| |
| /* |
| * If desc is NULL, this creates a path with only the file component, |
| * otherwise it creates a full path with both device and file components |
| */ |
| struct efi_device_path *efi_dp_from_file(struct blk_desc *desc, int part, |
| const char *path) |
| { |
| struct efi_device_path_file_path *fp; |
| void *buf, *start; |
| unsigned dpsize = 0, fpsize; |
| |
| if (desc) |
| dpsize = dp_part_size(desc, part); |
| |
| fpsize = sizeof(struct efi_device_path) + 2 * (strlen(path) + 1); |
| dpsize += fpsize; |
| |
| start = buf = dp_alloc(dpsize + sizeof(END)); |
| |
| if (desc) |
| buf = dp_part_fill(buf, desc, part); |
| |
| /* add file-path: */ |
| fp = buf; |
| fp->dp.type = DEVICE_PATH_TYPE_MEDIA_DEVICE; |
| fp->dp.sub_type = DEVICE_PATH_SUB_TYPE_FILE_PATH; |
| fp->dp.length = fpsize; |
| path_to_uefi(fp->str, path); |
| buf += fpsize; |
| |
| *((struct efi_device_path *)buf) = END; |
| |
| return start; |
| } |
| |
| #ifdef CONFIG_NET |
| struct efi_device_path *efi_dp_from_eth(void) |
| { |
| struct efi_device_path_mac_addr *ndp; |
| void *buf, *start; |
| unsigned dpsize = 0; |
| |
| assert(eth_get_dev()); |
| |
| #ifdef CONFIG_DM_ETH |
| dpsize += dp_size(eth_get_dev()); |
| #else |
| dpsize += sizeof(ROOT); |
| #endif |
| dpsize += sizeof(*ndp); |
| |
| start = buf = dp_alloc(dpsize + sizeof(END)); |
| |
| #ifdef CONFIG_DM_ETH |
| buf = dp_fill(buf, eth_get_dev()); |
| #else |
| memcpy(buf, &ROOT, sizeof(ROOT)); |
| buf += sizeof(ROOT); |
| #endif |
| |
| ndp = buf; |
| ndp->dp.type = DEVICE_PATH_TYPE_MESSAGING_DEVICE; |
| ndp->dp.sub_type = DEVICE_PATH_SUB_TYPE_MSG_MAC_ADDR; |
| ndp->dp.length = sizeof(*ndp); |
| memcpy(ndp->mac.addr, eth_get_ethaddr(), ARP_HLEN); |
| buf = &ndp[1]; |
| |
| *((struct efi_device_path *)buf) = END; |
| |
| return start; |
| } |
| #endif |
| |
| /* Construct a device-path for memory-mapped image */ |
| struct efi_device_path *efi_dp_from_mem(uint32_t memory_type, |
| uint64_t start_address, |
| uint64_t end_address) |
| { |
| struct efi_device_path_memory *mdp; |
| void *buf, *start; |
| |
| start = buf = dp_alloc(sizeof(*mdp) + sizeof(END)); |
| |
| mdp = buf; |
| mdp->dp.type = DEVICE_PATH_TYPE_HARDWARE_DEVICE; |
| mdp->dp.sub_type = DEVICE_PATH_SUB_TYPE_MEMORY; |
| mdp->dp.length = sizeof(*mdp); |
| mdp->memory_type = memory_type; |
| mdp->start_address = start_address; |
| mdp->end_address = end_address; |
| buf = &mdp[1]; |
| |
| *((struct efi_device_path *)buf) = END; |
| |
| return start; |
| } |
| |
| /* |
| * Helper to split a full device path (containing both device and file |
| * parts) into it's constituent parts. |
| */ |
| void efi_dp_split_file_path(struct efi_device_path *full_path, |
| struct efi_device_path **device_path, |
| struct efi_device_path **file_path) |
| { |
| struct efi_device_path *p, *dp, *fp; |
| |
| dp = efi_dp_dup(full_path); |
| p = dp; |
| while (!EFI_DP_TYPE(p, MEDIA_DEVICE, FILE_PATH)) |
| p = efi_dp_next(p); |
| fp = efi_dp_dup(p); |
| |
| p->type = DEVICE_PATH_TYPE_END; |
| p->sub_type = DEVICE_PATH_SUB_TYPE_END; |
| p->length = sizeof(*p); |
| |
| *device_path = dp; |
| *file_path = fp; |
| } |