include/configs/ge_bx50v3.h - filogic/uboot - Gitiles

 /*
  * Copyright (C) 2015 Timesys Corporation
  * Copyright (C) 2015 General Electric Company
  * Copyright (C) 2014 Advantech
  * Copyright (C) 2012 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the GE MX6Q Bx50v3 boards.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef __GE_BX50V3_CONFIG_H
 #define __GE_BX50V3_CONFIG_H

 #include <asm/arch/imx-regs.h>
 #include <asm/imx-common/gpio.h>

 #define BX50V3_BOOTARGS_EXTRA
 #if defined(CONFIG_TARGET_GE_B450V3)
 #define CONFIG_BOARD_NAME	"General Electric B450v3"
 #define CONFIG_DEFAULT_FDT_FILE	"/boot/imx6q-b450v3.dtb"
 #elif defined(CONFIG_TARGET_GE_B650V3)
 #define CONFIG_BOARD_NAME	"General Electric B650v3"
 #define CONFIG_DEFAULT_FDT_FILE	"/boot/imx6q-b650v3.dtb"
 #elif defined(CONFIG_TARGET_GE_B850V3)
 #define CONFIG_BOARD_NAME	"General Electric B850v3"
 #define CONFIG_DEFAULT_FDT_FILE	"/boot/imx6q-b850v3.dtb"
 #undef BX50V3_BOOTARGS_EXTRA
 #define BX50V3_BOOTARGS_EXTRA	"video=DP-1:1024x768@60 " \
 				"video=HDMI-A-1:1024x768@60 "
 #else
 #define CONFIG_BOARD_NAME	"General Electric BA16 Generic"
 #define CONFIG_DEFAULT_FDT_FILE	"/boot/imx6q-ba16.dtb"
 #endif

 #define CONFIG_MXC_UART_BASE	UART3_BASE
 #define CONFIG_CONSOLE_DEV	"ttymxc2"

 #define CONFIG_SUPPORT_EMMC_BOOT


 #include "mx6_common.h"
 #include <linux/sizes.h>

 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO

 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT

 #define CONFIG_MXC_GPIO
 #define CONFIG_MXC_UART

 #define CONFIG_CMD_FUSE
 #define CONFIG_MXC_OCOTP

 /* SATA Configs */
 #ifdef CONFIG_CMD_SATA
 #define CONFIG_DWC_AHSATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
 #define CONFIG_LIBATA
 #endif

 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_DOS_PARTITION

 /* USB Configs */
 #ifdef CONFIG_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS	0
 #define CONFIG_USB_KEYBOARD
 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP

 #define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_VBUS_DRAW 2
 #define CONFIG_G_DNL_VENDOR_NUM   0x0525
 #define CONFIG_G_DNL_PRODUCT_NUM  0xa4a5
 #define CONFIG_G_DNL_MANUFACTURER "Advantech"
 #endif

 /* Networking Configs */
 #ifdef CONFIG_NET
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define CONFIG_ETHPRIME		"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		4
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 #endif

 /* Serial Flash */
 #ifdef CONFIG_CMD_SF
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS		0
 #define CONFIG_SF_DEFAULT_CS		0
 #define CONFIG_SF_DEFAULT_SPEED	20000000
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 #endif

 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE	115200

 /* Command definition */
 #define CONFIG_CMD_BMODE

 #define CONFIG_LOADADDR	0x12000000
 #define CONFIG_SYS_TEXT_BASE	0x17800000

 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
 	"image=/boot/uImage\0" \
 	"uboot=u-boot.imx\0" \
 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 	"fdt_addr=0x18000000\0" \
 	"boot_fdt=yes\0" \
 	"ip_dyn=yes\0" \
 	"console=" CONFIG_CONSOLE_DEV "\0" \
 	"fdt_high=0xffffffff\0"	  \
 	"initrd_high=0xffffffff\0" \
 	"sddev=0\0" \
 	"emmcdev=1\0" \
 	"partnum=1\0" \
 	"update_sd_firmware=" \
 		"if test ${ip_dyn} = yes; then " \
 			"setenv get_cmd dhcp; " \
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
 		"if mmc dev ${mmcdev}; then "	\
 			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
 				"setexpr fw_sz ${filesize} / 0x200; " \
 				"setexpr fw_sz ${fw_sz} + 1; "	\
 				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 			"fi; "	\
 		"fi\0" \
 	"update_sf_uboot=" \
 		"if tftp $loadaddr $uboot; then " \
 			"sf probe; " \
 			"sf erase 0 0xC0000; " \
 			"sf write $loadaddr 0x400 $filesize; " \
 			"echo 'U-Boot upgraded. Please reset'; " \
 		"fi\0" \
 	"setargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/${rootdev} rw rootwait cma=128M " \
 		BX50V3_BOOTARGS_EXTRA "\0" \
 	"loadbootscript=" \
 		"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
 		" source\0" \
 	"loadimage=" \
 		"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
 	"loadfdt=ext2load ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
 	"tryboot=" \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
 			"if run loadimage; then " \
 				"run doboot; " \
 			"fi; " \
 		"fi;\0" \
 	"doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
 		"run setargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
 				"bootm ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
 					"bootm; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
 			"bootm; " \
 		"fi;\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs " \
 		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 	"netboot=echo Booting from net ...; " \
 		"run netargs; " \
 		"if test ${ip_dyn} = yes; then " \
 			"setenv get_cmd dhcp; " \
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
 		"${get_cmd} ${image}; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 				"bootm ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
 					"bootm; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
 			"bootm; " \
 		"fi;\0" \

 #define CONFIG_MMCBOOTCOMMAND \
 	"setenv dev mmc; " \
 	"setenv rootdev mmcblk0p${partnum}; " \
 	\
 	"setenv devnum ${sddev}; " \
 	"if mmc dev ${devnum}; then " \
 		"run tryboot; " \
 		"setenv rootdev mmcblk1p${partnum}; " \
 	"fi; " \
 	\
 	"setenv devnum ${emmcdev}; " \
 	"if mmc dev ${devnum}; then " \
 		"run tryboot; " \
 	"fi; " \

 #define CONFIG_USBBOOTCOMMAND \
 	"usb start; " \
 	"setenv dev usb; " \
 	"setenv devnum 0; " \
 	"setenv rootdev sda${partnum}; " \
 	"run tryboot; " \
 	\
 	CONFIG_MMCBOOTCOMMAND \
 	"bmode usb; " \

 #ifdef CONFIG_CMD_USB
 #define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
 #else
 #define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
 #endif

 #define CONFIG_ARP_TIMEOUT     200UL

 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_AUTO_COMPLETE

 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END         0x10010000
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR

 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_STACKSIZE               (128 * 1024)

 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR

 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

 /* FLASH and environment organization */
 #define CONFIG_SYS_NO_FLASH

 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE		(8 * 1024)
 #define CONFIG_ENV_OFFSET		(768 * 1024)
 #define CONFIG_ENV_SECT_SIZE		(64 * 1024)
 #define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
 #define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED

 #ifndef CONFIG_SYS_DCACHE_OFF
 #endif

 #define CONFIG_SYS_FSL_USDHC_NUM	3

 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE

 /* Framebuffer */
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_IPUV3_CLK 260000000
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 #endif

 #define CONFIG_PWM_IMX
 #define CONFIG_IMX6_PWM_PER_CLK	66000000

 #undef CONFIG_CMD_PCI
 #ifdef CONFIG_CMD_PCI
 #define CONFIG_PCI
 #define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
 #define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
 #define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(1, 5)
 #endif

 /* I2C Configs */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED		  100000
 #define CONFIG_SYS_I2C_MXC_I2C1
 #define CONFIG_SYS_I2C_MXC_I2C2
 #define CONFIG_SYS_I2C_MXC_I2C3

 #endif	/* __GE_BX50V3_CONFIG_H */
	/*
	* Copyright (C) 2015 Timesys Corporation
	* Copyright (C) 2015 General Electric Company
	* Copyright (C) 2014 Advantech
	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	*
	* Configuration settings for the GE MX6Q Bx50v3 boards.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __GE_BX50V3_CONFIG_H
	#define __GE_BX50V3_CONFIG_H

	#include <asm/arch/imx-regs.h>
	#include <asm/imx-common/gpio.h>

	#define BX50V3_BOOTARGS_EXTRA
	#if defined(CONFIG_TARGET_GE_B450V3)
	#define CONFIG_BOARD_NAME "General Electric B450v3"
	#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b450v3.dtb"
	#elif defined(CONFIG_TARGET_GE_B650V3)
	#define CONFIG_BOARD_NAME "General Electric B650v3"
	#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b650v3.dtb"
	#elif defined(CONFIG_TARGET_GE_B850V3)
	#define CONFIG_BOARD_NAME "General Electric B850v3"
	#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b850v3.dtb"
	#undef BX50V3_BOOTARGS_EXTRA
	#define BX50V3_BOOTARGS_EXTRA "video=DP-1:1024x768@60 " \
	"video=HDMI-A-1:1024x768@60 "
	#else
	#define CONFIG_BOARD_NAME "General Electric BA16 Generic"
	#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-ba16.dtb"
	#endif

	#define CONFIG_MXC_UART_BASE UART3_BASE
	#define CONFIG_CONSOLE_DEV "ttymxc2"

	#define CONFIG_SUPPORT_EMMC_BOOT


	#include "mx6_common.h"
	#include <linux/sizes.h>

	#define CONFIG_DISPLAY_CPUINFO
	#define CONFIG_DISPLAY_BOARDINFO

	#define CONFIG_CMDLINE_TAG
	#define CONFIG_SETUP_MEMORY_TAGS
	#define CONFIG_INITRD_TAG
	#define CONFIG_REVISION_TAG
	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)

	#define CONFIG_BOARD_EARLY_INIT_F
	#define CONFIG_BOARD_LATE_INIT

	#define CONFIG_MXC_GPIO
	#define CONFIG_MXC_UART

	#define CONFIG_CMD_FUSE
	#define CONFIG_MXC_OCOTP

	/* SATA Configs */
	#ifdef CONFIG_CMD_SATA
	#define CONFIG_DWC_AHSATA
	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	#define CONFIG_DWC_AHSATA_PORT_ID 0
	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	#define CONFIG_LBA48
	#define CONFIG_LIBATA
	#endif

	/* MMC Configs */
	#define CONFIG_FSL_ESDHC
	#define CONFIG_FSL_USDHC
	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	#define CONFIG_MMC
	#define CONFIG_GENERIC_MMC
	#define CONFIG_BOUNCE_BUFFER
	#define CONFIG_DOS_PARTITION

	/* USB Configs */
	#ifdef CONFIG_USB
	#define CONFIG_USB_EHCI
	#define CONFIG_USB_EHCI_MX6
	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	#define CONFIG_MXC_USB_FLAGS 0
	#define CONFIG_USB_KEYBOARD
	#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP

	#define CONFIG_CI_UDC
	#define CONFIG_USBD_HS
	#define CONFIG_USB_GADGET_DUALSPEED
	#define CONFIG_USB_GADGET
	#define CONFIG_USB_GADGET_DOWNLOAD
	#define CONFIG_USB_GADGET_MASS_STORAGE
	#define CONFIG_USB_FUNCTION_MASS_STORAGE
	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	#define CONFIG_G_DNL_VENDOR_NUM 0x0525
	#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
	#define CONFIG_G_DNL_MANUFACTURER "Advantech"
	#endif

	/* Networking Configs */
	#ifdef CONFIG_NET
	#define CONFIG_FEC_MXC
	#define CONFIG_MII
	#define IMX_FEC_BASE ENET_BASE_ADDR
	#define CONFIG_FEC_XCV_TYPE RGMII
	#define CONFIG_ETHPRIME "FEC"
	#define CONFIG_FEC_MXC_PHYADDR 4
	#define CONFIG_PHYLIB
	#define CONFIG_PHY_ATHEROS
	#endif

	/* Serial Flash */
	#ifdef CONFIG_CMD_SF
	#define CONFIG_MXC_SPI
	#define CONFIG_SF_DEFAULT_BUS 0
	#define CONFIG_SF_DEFAULT_CS 0
	#define CONFIG_SF_DEFAULT_SPEED 20000000
	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	#endif

	/* allow to overwrite serial and ethaddr */
	#define CONFIG_ENV_OVERWRITE
	#define CONFIG_CONS_INDEX 1
	#define CONFIG_BAUDRATE 115200

	/* Command definition */
	#define CONFIG_CMD_BMODE

	#define CONFIG_LOADADDR 0x12000000
	#define CONFIG_SYS_TEXT_BASE 0x17800000

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=/boot/uImage\0" \
	"uboot=u-boot.imx\0" \
	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=yes\0" \
	"ip_dyn=yes\0" \
	"console=" CONFIG_CONSOLE_DEV "\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"sddev=0\0" \
	"emmcdev=1\0" \
	"partnum=1\0" \
	"update_sd_firmware=" \
	"if test ${ip_dyn} = yes; then " \
	"setenv get_cmd dhcp; " \
	"else " \
	"setenv get_cmd tftp; " \
	"fi; " \
	"if mmc dev ${mmcdev}; then " \
	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	"setexpr fw_sz ${filesize} / 0x200; " \
	"setexpr fw_sz ${fw_sz} + 1; " \
	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	"fi; " \
	"fi\0" \
	"update_sf_uboot=" \
	"if tftp $loadaddr $uboot; then " \
	"sf probe; " \
	"sf erase 0 0xC0000; " \
	"sf write $loadaddr 0x400 $filesize; " \
	"echo 'U-Boot upgraded. Please reset'; " \
	"fi\0" \
	"setargs=setenv bootargs console=${console},${baudrate} " \
	"root=/dev/${rootdev} rw rootwait cma=128M " \
	BX50V3_BOOTARGS_EXTRA "\0" \
	"loadbootscript=" \
	"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
	" source\0" \
	"loadimage=" \
	"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
	"loadfdt=ext2load ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
	"tryboot=" \
	"if run loadbootscript; then " \
	"run bootscript; " \
	"else " \
	"if run loadimage; then " \
	"run doboot; " \
	"fi; " \
	"fi;\0" \
	"doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
	"run setargs; " \
	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	"if run loadfdt; then " \
	"bootm ${loadaddr} - ${fdt_addr}; " \
	"else " \
	"if test ${boot_fdt} = try; then " \
	"bootm; " \
	"else " \
	"echo WARN: Cannot load the DT; " \
	"fi; " \
	"fi; " \
	"else " \
	"bootm; " \
	"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
	"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
	"run netargs; " \
	"if test ${ip_dyn} = yes; then " \
	"setenv get_cmd dhcp; " \
	"else " \
	"setenv get_cmd tftp; " \
	"fi; " \
	"${get_cmd} ${image}; " \
	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	"bootm ${loadaddr} - ${fdt_addr}; " \
	"else " \
	"if test ${boot_fdt} = try; then " \
	"bootm; " \
	"else " \
	"echo WARN: Cannot load the DT; " \
	"fi; " \
	"fi; " \
	"else " \
	"bootm; " \
	"fi;\0" \

	#define CONFIG_MMCBOOTCOMMAND \
	"setenv dev mmc; " \
	"setenv rootdev mmcblk0p${partnum}; " \
	\
	"setenv devnum ${sddev}; " \
	"if mmc dev ${devnum}; then " \
	"run tryboot; " \
	"setenv rootdev mmcblk1p${partnum}; " \
	"fi; " \
	\
	"setenv devnum ${emmcdev}; " \
	"if mmc dev ${devnum}; then " \
	"run tryboot; " \
	"fi; " \

	#define CONFIG_USBBOOTCOMMAND \
	"usb start; " \
	"setenv dev usb; " \
	"setenv devnum 0; " \
	"setenv rootdev sda${partnum}; " \
	"run tryboot; " \
	\
	CONFIG_MMCBOOTCOMMAND \
	"bmode usb; " \

	#ifdef CONFIG_CMD_USB
	#define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
	#else
	#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
	#endif

	#define CONFIG_ARP_TIMEOUT 200UL

	/* Miscellaneous configurable options */
	#define CONFIG_SYS_LONGHELP
	#define CONFIG_AUTO_COMPLETE

	/* Print Buffer Size */
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

	#define CONFIG_SYS_MEMTEST_START 0x10000000
	#define CONFIG_SYS_MEMTEST_END 0x10010000
	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000

	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

	#define CONFIG_CMDLINE_EDITING
	#define CONFIG_STACKSIZE (128 * 1024)

	/* Physical Memory Map */
	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE

	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	/* FLASH and environment organization */
	#define CONFIG_SYS_NO_FLASH

	#define CONFIG_ENV_IS_IN_SPI_FLASH
	#define CONFIG_ENV_SIZE (8 * 1024)
	#define CONFIG_ENV_OFFSET (768 * 1024)
	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED

	#ifndef CONFIG_SYS_DCACHE_OFF
	#endif

	#define CONFIG_SYS_FSL_USDHC_NUM 3

	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE

	/* Framebuffer */
	#ifdef CONFIG_VIDEO
	#define CONFIG_VIDEO_IPUV3
	#define CONFIG_CFB_CONSOLE
	#define CONFIG_VGA_AS_SINGLE_DEVICE
	#define CONFIG_VIDEO_BMP_RLE8
	#define CONFIG_SPLASH_SCREEN
	#define CONFIG_SPLASH_SCREEN_ALIGN
	#define CONFIG_BMP_16BPP
	#define CONFIG_VIDEO_LOGO
	#define CONFIG_VIDEO_BMP_LOGO
	#define CONFIG_IPUV3_CLK 260000000
	#define CONFIG_IMX_HDMI
	#define CONFIG_IMX_VIDEO_SKIP
	#endif

	#define CONFIG_PWM_IMX
	#define CONFIG_IMX6_PWM_PER_CLK 66000000

	#undef CONFIG_CMD_PCI
	#ifdef CONFIG_CMD_PCI
	#define CONFIG_PCI
	#define CONFIG_PCI_PNP
	#define CONFIG_PCI_SCAN_SHOW
	#define CONFIG_PCIE_IMX
	#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
	#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
	#endif

	/* I2C Configs */
	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_MXC
	#define CONFIG_SYS_I2C_SPEED 100000
	#define CONFIG_SYS_I2C_MXC_I2C1
	#define CONFIG_SYS_I2C_MXC_I2C2
	#define CONFIG_SYS_I2C_MXC_I2C3

	#endif /* __GE_BX50V3_CONFIG_H */