| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Renesas RCar Gen2 CPG MSSR driver |
| * |
| * Copyright (C) 2017 Marek Vasut <marek.vasut@gmail.com> |
| * |
| * Based on the following driver from Linux kernel: |
| * r8a7796 Clock Pulse Generator / Module Standby and Software Reset |
| * |
| * Copyright (C) 2016 Glider bvba |
| */ |
| |
| #include <common.h> |
| #include <clk-uclass.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <log.h> |
| #include <asm/io.h> |
| |
| #include <dt-bindings/clock/renesas-cpg-mssr.h> |
| |
| #include "renesas-cpg-mssr.h" |
| #include "rcar-gen2-cpg.h" |
| |
| #define CPG_RST_MODEMR 0x0060 |
| |
| #define CPG_PLL0CR 0x00d8 |
| #define CPG_SDCKCR 0x0074 |
| |
| struct clk_div_table { |
| u8 val; |
| u8 div; |
| }; |
| |
| /* SDHI divisors */ |
| static const struct clk_div_table cpg_sdh_div_table[] = { |
| { 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 }, |
| { 4, 8 }, { 5, 12 }, { 6, 16 }, { 7, 18 }, |
| { 8, 24 }, { 10, 36 }, { 11, 48 }, { 0, 0 }, |
| }; |
| |
| static const struct clk_div_table cpg_sd01_div_table[] = { |
| { 4, 8 }, { 5, 12 }, { 6, 16 }, { 7, 18 }, |
| { 8, 24 }, { 10, 36 }, { 11, 48 }, { 12, 10 }, |
| { 0, 0 }, |
| }; |
| |
| static u8 gen2_clk_get_sdh_div(const struct clk_div_table *table, u8 val) |
| { |
| for (;;) { |
| if (!(*table).div) |
| return 0xff; |
| |
| if ((*table).val == val) |
| return (*table).div; |
| |
| table++; |
| } |
| } |
| |
| static int gen2_clk_enable(struct clk *clk) |
| { |
| struct gen2_clk_priv *priv = dev_get_priv(clk->dev); |
| |
| return renesas_clk_endisable(clk, priv->base, true); |
| } |
| |
| static int gen2_clk_disable(struct clk *clk) |
| { |
| struct gen2_clk_priv *priv = dev_get_priv(clk->dev); |
| |
| return renesas_clk_endisable(clk, priv->base, false); |
| } |
| |
| static ulong gen2_clk_get_rate(struct clk *clk) |
| { |
| struct gen2_clk_priv *priv = dev_get_priv(clk->dev); |
| struct cpg_mssr_info *info = priv->info; |
| struct clk parent; |
| const struct cpg_core_clk *core; |
| const struct rcar_gen2_cpg_pll_config *pll_config = |
| priv->cpg_pll_config; |
| u32 value, mult, div, rate = 0; |
| int ret; |
| |
| debug("%s[%i] Clock: id=%lu\n", __func__, __LINE__, clk->id); |
| |
| ret = renesas_clk_get_parent(clk, info, &parent); |
| if (ret) { |
| printf("%s[%i] parent fail, ret=%i\n", __func__, __LINE__, ret); |
| return ret; |
| } |
| |
| if (renesas_clk_is_mod(clk)) { |
| rate = gen2_clk_get_rate(&parent); |
| debug("%s[%i] MOD clk: parent=%lu => rate=%u\n", |
| __func__, __LINE__, parent.id, rate); |
| return rate; |
| } |
| |
| ret = renesas_clk_get_core(clk, info, &core); |
| if (ret) |
| return ret; |
| |
| switch (core->type) { |
| case CLK_TYPE_IN: |
| if (core->id == info->clk_extal_id) { |
| rate = clk_get_rate(&priv->clk_extal); |
| debug("%s[%i] EXTAL clk: rate=%u\n", |
| __func__, __LINE__, rate); |
| return rate; |
| } |
| |
| if (core->id == info->clk_extal_usb_id) { |
| rate = clk_get_rate(&priv->clk_extal_usb); |
| debug("%s[%i] EXTALR clk: rate=%u\n", |
| __func__, __LINE__, rate); |
| return rate; |
| } |
| |
| return -EINVAL; |
| |
| case CLK_TYPE_FF: |
| rate = (gen2_clk_get_rate(&parent) * core->mult) / core->div; |
| debug("%s[%i] FIXED clk: parent=%i mul=%i div=%i => rate=%u\n", |
| __func__, __LINE__, |
| core->parent, core->mult, core->div, rate); |
| return rate; |
| |
| case CLK_TYPE_DIV6P1: /* DIV6 Clock with 1 parent clock */ |
| value = (readl(priv->base + core->offset) & 0x3f) + 1; |
| rate = gen2_clk_get_rate(&parent) / value; |
| debug("%s[%i] DIV6P1 clk: parent=%i div=%i => rate=%u\n", |
| __func__, __LINE__, |
| core->parent, value, rate); |
| return rate; |
| |
| case CLK_TYPE_GEN2_MAIN: |
| rate = gen2_clk_get_rate(&parent) / pll_config->extal_div; |
| debug("%s[%i] MAIN clk: parent=%i extal_div=%i => rate=%u\n", |
| __func__, __LINE__, |
| core->parent, pll_config->extal_div, rate); |
| return rate; |
| |
| case CLK_TYPE_GEN2_PLL0: |
| /* |
| * PLL0 is a configurable multiplier clock except on R-Car |
| * V2H/E2. Register the PLL0 clock as a fixed factor clock for |
| * now as there's no generic multiplier clock implementation and |
| * we currently have no need to change the multiplier value. |
| */ |
| mult = pll_config->pll0_mult; |
| if (!mult) { |
| value = readl(priv->base + CPG_PLL0CR); |
| mult = (((value >> 24) & 0x7f) + 1) * 2; |
| } |
| |
| rate = (gen2_clk_get_rate(&parent) * mult) / info->pll0_div; |
| debug("%s[%i] PLL0 clk: parent=%i mult=%u => rate=%u\n", |
| __func__, __LINE__, core->parent, mult, rate); |
| return rate; |
| |
| case CLK_TYPE_GEN2_PLL1: |
| rate = (gen2_clk_get_rate(&parent) * pll_config->pll1_mult) / 2; |
| debug("%s[%i] PLL1 clk: parent=%i mul=%i => rate=%u\n", |
| __func__, __LINE__, |
| core->parent, pll_config->pll1_mult, rate); |
| return rate; |
| |
| case CLK_TYPE_GEN2_PLL3: |
| rate = gen2_clk_get_rate(&parent) * pll_config->pll3_mult; |
| debug("%s[%i] PLL3 clk: parent=%i mul=%i => rate=%u\n", |
| __func__, __LINE__, |
| core->parent, pll_config->pll3_mult, rate); |
| return rate; |
| |
| case CLK_TYPE_GEN2_SDH: |
| value = (readl(priv->base + CPG_SDCKCR) >> 8) & 0xf; |
| div = gen2_clk_get_sdh_div(cpg_sdh_div_table, value); |
| rate = gen2_clk_get_rate(&parent) / div; |
| debug("%s[%i] SDH clk: parent=%i div=%i => rate=%u\n", |
| __func__, __LINE__, |
| core->parent, div, rate); |
| return rate; |
| |
| case CLK_TYPE_GEN2_SD0: |
| value = (readl(priv->base + CPG_SDCKCR) >> 4) & 0xf; |
| div = gen2_clk_get_sdh_div(cpg_sd01_div_table, value); |
| rate = gen2_clk_get_rate(&parent) / div; |
| debug("%s[%i] SD0 clk: parent=%i div=%i => rate=%u\n", |
| __func__, __LINE__, |
| core->parent, div, rate); |
| return rate; |
| |
| case CLK_TYPE_GEN2_SD1: |
| value = (readl(priv->base + CPG_SDCKCR) >> 0) & 0xf; |
| div = gen2_clk_get_sdh_div(cpg_sd01_div_table, value); |
| rate = gen2_clk_get_rate(&parent) / div; |
| debug("%s[%i] SD1 clk: parent=%i div=%i => rate=%u\n", |
| __func__, __LINE__, |
| core->parent, div, rate); |
| return rate; |
| } |
| |
| printf("%s[%i] unknown fail\n", __func__, __LINE__); |
| |
| return -ENOENT; |
| } |
| |
| static int gen2_clk_setup_mmcif_div(struct clk *clk, ulong rate) |
| { |
| struct gen2_clk_priv *priv = dev_get_priv(clk->dev); |
| struct cpg_mssr_info *info = priv->info; |
| const struct cpg_core_clk *core; |
| struct clk parent, pparent; |
| u32 val; |
| int ret; |
| |
| ret = renesas_clk_get_parent(clk, info, &parent); |
| if (ret) { |
| debug("%s[%i] parent fail, ret=%i\n", __func__, __LINE__, ret); |
| return ret; |
| } |
| |
| if (renesas_clk_is_mod(&parent)) |
| return 0; |
| |
| ret = renesas_clk_get_core(&parent, info, &core); |
| if (ret) |
| return ret; |
| |
| if (strcmp(core->name, "mmc0") && strcmp(core->name, "mmc1")) |
| return 0; |
| |
| ret = renesas_clk_get_parent(&parent, info, &pparent); |
| if (ret) { |
| debug("%s[%i] parent fail, ret=%i\n", __func__, __LINE__, ret); |
| return ret; |
| } |
| |
| val = (gen2_clk_get_rate(&pparent) / rate) - 1; |
| |
| debug("%s[%i] MMCIF offset=%x\n", __func__, __LINE__, core->offset); |
| |
| writel(val, priv->base + core->offset); |
| |
| return 0; |
| } |
| |
| static ulong gen2_clk_set_rate(struct clk *clk, ulong rate) |
| { |
| /* Force correct MMC-IF divider configuration if applicable */ |
| gen2_clk_setup_mmcif_div(clk, rate); |
| return gen2_clk_get_rate(clk); |
| } |
| |
| static int gen2_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args) |
| { |
| if (args->args_count != 2) { |
| debug("Invaild args_count: %d\n", args->args_count); |
| return -EINVAL; |
| } |
| |
| clk->id = (args->args[0] << 16) | args->args[1]; |
| |
| return 0; |
| } |
| |
| const struct clk_ops gen2_clk_ops = { |
| .enable = gen2_clk_enable, |
| .disable = gen2_clk_disable, |
| .get_rate = gen2_clk_get_rate, |
| .set_rate = gen2_clk_set_rate, |
| .of_xlate = gen2_clk_of_xlate, |
| }; |
| |
| int gen2_clk_probe(struct udevice *dev) |
| { |
| struct gen2_clk_priv *priv = dev_get_priv(dev); |
| struct cpg_mssr_info *info = |
| (struct cpg_mssr_info *)dev_get_driver_data(dev); |
| fdt_addr_t rst_base; |
| u32 cpg_mode; |
| int ret; |
| |
| priv->base = dev_read_addr_ptr(dev); |
| if (!priv->base) |
| return -EINVAL; |
| |
| priv->info = info; |
| ret = fdt_node_offset_by_compatible(gd->fdt_blob, -1, info->reset_node); |
| if (ret < 0) |
| return ret; |
| |
| rst_base = fdtdec_get_addr_size_auto_noparent(gd->fdt_blob, ret, "reg", |
| 0, NULL, false); |
| if (rst_base == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| cpg_mode = readl(rst_base + CPG_RST_MODEMR); |
| |
| priv->cpg_pll_config = |
| (struct rcar_gen2_cpg_pll_config *)info->get_pll_config(cpg_mode); |
| if (!priv->cpg_pll_config->extal_div) |
| return -EINVAL; |
| |
| ret = clk_get_by_name(dev, "extal", &priv->clk_extal); |
| if (ret < 0) |
| return ret; |
| |
| if (info->extal_usb_node) { |
| ret = clk_get_by_name(dev, info->extal_usb_node, |
| &priv->clk_extal_usb); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int gen2_clk_remove(struct udevice *dev) |
| { |
| struct gen2_clk_priv *priv = dev_get_priv(dev); |
| |
| return renesas_clk_remove(priv->base, priv->info); |
| } |