include/configs/socfpga_common.h - filogic/uboot - Gitiles

 /*
  * Copyright (C) 2012 Altera Corporation <www.altera.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__
 #define __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__


 /* Virtual target or real hardware */
 #undef CONFIG_SOCFPGA_VIRTUAL_TARGET

 #define CONFIG_SYS_THUMB_BUILD

 /*
  * High level configuration
  */
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO_LATE
 #define CONFIG_ARCH_MISC_INIT
 #define CONFIG_ARCH_EARLY_INIT_R
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_CLOCKS

 #define CONFIG_CRC32_VERIFY

 #define CONFIG_FIT
 #define CONFIG_OF_LIBFDT
 #define CONFIG_SYS_BOOTMAPSZ		(64 * 1024 * 1024)

 #define CONFIG_TIMESTAMP		/* Print image info with timestamp */

 /*
  * Memory configurations
  */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM_1			0x0
 #define CONFIG_SYS_MALLOC_LEN		(64 * 1024 * 1024)
 #define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1
 #define CONFIG_SYS_MEMTEST_END		PHYS_SDRAM_1_SIZE

 #define CONFIG_SYS_INIT_RAM_ADDR	0xFFFF0000
 #define CONFIG_SYS_INIT_RAM_SIZE	0x10000
 #define CONFIG_SYS_INIT_SP_OFFSET		\
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR			\
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 #define CONFIG_SYS_TEXT_BASE		0x08000040
 #else
 #define CONFIG_SYS_TEXT_BASE		0x01000040
 #endif

 /*
  * U-Boot general configurations
  */
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
 #define CONFIG_SYS_PBSIZE	\
 	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 						/* Print buffer size */
 #define CONFIG_SYS_MAXARGS	32		/* Max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 						/* Boot argument buffer size */
 #define CONFIG_VERSION_VARIABLE			/* U-BOOT version */
 #define CONFIG_AUTO_COMPLETE			/* Command auto complete */
 #define CONFIG_CMDLINE_EDITING			/* Command history etc */
 #define CONFIG_SYS_HUSH_PARSER

 /*
  * Cache
  */
 #define CONFIG_SYS_CACHELINE_SIZE 32
 #define CONFIG_SYS_L2_PL310
 #define CONFIG_SYS_PL310_BASE		SOCFPGA_MPUL2_ADDRESS

 /*
  * SDRAM controller
  */
 #define CONFIG_ALTERA_SDRAM

 /*
  * EPCS/EPCQx1 Serial Flash Controller
  */
 #ifdef CONFIG_ALTERA_SPI
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED		30000000
 #define CONFIG_SPI_FLASH_BAR
 /*
  * The base address is configurable in QSys, each board must specify the
  * base address based on it's particular FPGA configuration. Please note
  * that the address here is incremented by  0x400  from the Base address
  * selected in QSys, since the SPI registers are at offset +0x400.
  * #define CONFIG_SYS_SPI_BASE		0xff240400
  */
 #endif

 /*
  * Ethernet on SoC (EMAC)
  */
 #if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
 #define CONFIG_DW_ALTDESCRIPTOR
 #define CONFIG_MII
 #define CONFIG_AUTONEG_TIMEOUT		(15 * CONFIG_SYS_HZ)
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_GIGE
 #endif

 /*
  * FPGA Driver
  */
 #ifdef CONFIG_CMD_FPGA
 #define CONFIG_FPGA
 #define CONFIG_FPGA_ALTERA
 #define CONFIG_FPGA_SOCFPGA
 #define CONFIG_FPGA_COUNT		1
 #endif

 /*
  * L4 OSC1 Timer 0
  */
 /* This timer uses eosc1, whose clock frequency is fixed at any condition. */
 #define CONFIG_SYS_TIMERBASE		SOCFPGA_OSC1TIMER0_ADDRESS
 #define CONFIG_SYS_TIMER_COUNTS_DOWN
 #define CONFIG_SYS_TIMER_COUNTER	(CONFIG_SYS_TIMERBASE + 0x4)
 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 #define CONFIG_SYS_TIMER_RATE		2400000
 #else
 #define CONFIG_SYS_TIMER_RATE		25000000
 #endif

 /*
  * L4 Watchdog
  */
 #ifdef CONFIG_HW_WATCHDOG
 #define CONFIG_DESIGNWARE_WATCHDOG
 #define CONFIG_DW_WDT_BASE		SOCFPGA_L4WD0_ADDRESS
 #define CONFIG_DW_WDT_CLOCK_KHZ		25000
 #define CONFIG_HW_WATCHDOG_TIMEOUT_MS	30000
 #endif

 /*
  * MMC Driver
  */
 #ifdef CONFIG_CMD_MMC
 #define CONFIG_MMC
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_GENERIC_MMC
 #define CONFIG_DWMMC
 #define CONFIG_SOCFPGA_DWMMC
 #define CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH	1024
 #define CONFIG_SOCFPGA_DWMMC_DRVSEL	3
 #define CONFIG_SOCFPGA_DWMMC_SMPSEL	0
 /* FIXME */
 /* using smaller max blk cnt to avoid flooding the limited stack we have */
 #define CONFIG_SYS_MMC_MAX_BLK_COUNT	256	/* FIXME -- SPL only? */
 #endif

 /*
  * I2C support
  */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_DW
 #define CONFIG_SYS_I2C_BUS_MAX		4
 #define CONFIG_SYS_I2C_BASE		SOCFPGA_I2C0_ADDRESS
 #define CONFIG_SYS_I2C_BASE1		SOCFPGA_I2C1_ADDRESS
 #define CONFIG_SYS_I2C_BASE2		SOCFPGA_I2C2_ADDRESS
 #define CONFIG_SYS_I2C_BASE3		SOCFPGA_I2C3_ADDRESS
 /* Using standard mode which the speed up to 100Kb/s */
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SPEED1		100000
 #define CONFIG_SYS_I2C_SPEED2		100000
 #define CONFIG_SYS_I2C_SPEED3		100000
 /* Address of device when used as slave */
 #define CONFIG_SYS_I2C_SLAVE		0x02
 #define CONFIG_SYS_I2C_SLAVE1		0x02
 #define CONFIG_SYS_I2C_SLAVE2		0x02
 #define CONFIG_SYS_I2C_SLAVE3		0x02
 #ifndef __ASSEMBLY__
 /* Clock supplied to I2C controller in unit of MHz */
 unsigned int cm_get_l4_sp_clk_hz(void);
 #define IC_CLK				(cm_get_l4_sp_clk_hz() / 1000000)
 #endif
 #define CONFIG_CMD_I2C

 /*
  * QSPI support
  */
 /* Enable multiple SPI NOR flash manufacturers */
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SPI_FLASH_MTD
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 #define MTDIDS_DEFAULT			"nor0=ff705000.spi"
 #endif
 /* QSPI reference clock */
 #ifndef __ASSEMBLY__
 unsigned int cm_get_qspi_controller_clk_hz(void);
 #define CONFIG_CQSPI_REF_CLK		cm_get_qspi_controller_clk_hz()
 #endif
 #define CONFIG_CQSPI_DECODER		0
 #define CONFIG_CMD_SF
 #define CONFIG_SPI_FLASH_BAR

 /*
  * Designware SPI support
  */
 #define CONFIG_CMD_SPI

 /*
  * Serial Driver
  */
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	-4
 #define CONFIG_SYS_NS16550_COM1		SOCFPGA_UART0_ADDRESS
 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 #define CONFIG_SYS_NS16550_CLK		1000000
 #else
 #define CONFIG_SYS_NS16550_CLK		100000000
 #endif
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_BAUDRATE			115200

 /*
  * USB
  */
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_DWC2
 #define CONFIG_USB_STORAGE
 /*
  * NOTE: User must define either of the following to select which
  *       of the two USB controllers available on SoCFPGA to use.
  *       The DWC2 driver doesn't support multiple USB controllers.
  * #define CONFIG_USB_DWC2_REG_ADDR	SOCFPGA_USB0_ADDRESS
  * #define CONFIG_USB_DWC2_REG_ADDR	SOCFPGA_USB1_ADDRESS
  */
 #endif

 /*
  * USB Gadget (DFU, UMS)
  */
 #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_S3C_UDC_OTG
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW	2

 /* USB Composite download gadget - g_dnl */
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_FUNCTION_MASS_STORAGE

 #define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_MMC
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	(32 * 1024 * 1024)
 #define DFU_DEFAULT_POLL_TIMEOUT	300

 /* USB IDs */
 #define CONFIG_G_DNL_VENDOR_NUM		0x0525	/* NetChip */
 #define CONFIG_G_DNL_PRODUCT_NUM	0xA4A5	/* Linux-USB File-backed Storage Gadget */
 #define CONFIG_G_DNL_UMS_VENDOR_NUM	CONFIG_G_DNL_VENDOR_NUM
 #define CONFIG_G_DNL_UMS_PRODUCT_NUM	CONFIG_G_DNL_PRODUCT_NUM
 #ifndef CONFIG_G_DNL_MANUFACTURER
 #define CONFIG_G_DNL_MANUFACTURER	"Altera"
 #endif
 #endif

 /*
  * U-Boot environment
  */
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
 #define CONFIG_ENV_SIZE			4096

 /*
  * SPL
  *
  * SRAM Memory layout:
  *
  * 0xFFFF_0000 ...... Start of SRAM
  * 0xFFFF_xxxx ...... Top of stack (grows down)
  * 0xFFFF_yyyy ...... Malloc area
  * 0xFFFF_zzzz ...... Global Data
  * 0xFFFF_FF00 ...... End of SRAM
  */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_RAM_DEVICE
 #define CONFIG_SPL_TEXT_BASE		CONFIG_SYS_INIT_RAM_ADDR
 #define CONFIG_SPL_MAX_SIZE		(64 * 1024)
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MALLOC_SIMPLE
 #endif

 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_WATCHDOG_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_SPI_SUPPORT

 /* SPL SDMMC boot support */
 #ifdef CONFIG_SPL_MMC_SUPPORT
 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	2
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot-dtb.img"
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #else
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	3
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0xa00 /* offset 2560 sect (1M+256k) */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	800 /* 400 KB */
 #endif
 #endif

 /* SPL QSPI boot support */
 #ifdef CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_DM_SEQ_ALIAS		1
 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x40000
 #endif

 /*
  * Stack setup
  */
 #define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR

 #endif	/* __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ */
	/*
	* Copyright (C) 2012 Altera Corporation <www.altera.com>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/
	#ifndef __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__
	#define __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__


	/* Virtual target or real hardware */
	#undef CONFIG_SOCFPGA_VIRTUAL_TARGET

	#define CONFIG_SYS_THUMB_BUILD

	/*
	* High level configuration
	*/
	#define CONFIG_DISPLAY_CPUINFO
	#define CONFIG_DISPLAY_BOARDINFO_LATE
	#define CONFIG_ARCH_MISC_INIT
	#define CONFIG_ARCH_EARLY_INIT_R
	#define CONFIG_SYS_NO_FLASH
	#define CONFIG_CLOCKS

	#define CONFIG_CRC32_VERIFY

	#define CONFIG_FIT
	#define CONFIG_OF_LIBFDT
	#define CONFIG_SYS_BOOTMAPSZ (64 * 1024 * 1024)

	#define CONFIG_TIMESTAMP /* Print image info with timestamp */

	/*
	* Memory configurations
	*/
	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM_1 0x0
	#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
	#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE

	#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000
	#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
	#define CONFIG_SYS_TEXT_BASE 0x08000040
	#else
	#define CONFIG_SYS_TEXT_BASE 0x01000040
	#endif

	/*
	* U-Boot general configurations
	*/
	#define CONFIG_SYS_LONGHELP
	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
	#define CONFIG_SYS_PBSIZE \
	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	/* Print buffer size */
	#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	/* Boot argument buffer size */
	#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
	#define CONFIG_AUTO_COMPLETE /* Command auto complete */
	#define CONFIG_CMDLINE_EDITING /* Command history etc */
	#define CONFIG_SYS_HUSH_PARSER

	/*
	* Cache
	*/
	#define CONFIG_SYS_CACHELINE_SIZE 32
	#define CONFIG_SYS_L2_PL310
	#define CONFIG_SYS_PL310_BASE SOCFPGA_MPUL2_ADDRESS

	/*
	* SDRAM controller
	*/
	#define CONFIG_ALTERA_SDRAM

	/*
	* EPCS/EPCQx1 Serial Flash Controller
	*/
	#ifdef CONFIG_ALTERA_SPI
	#define CONFIG_CMD_SPI
	#define CONFIG_CMD_SF
	#define CONFIG_SF_DEFAULT_SPEED 30000000
	#define CONFIG_SPI_FLASH_BAR
	/*
	* The base address is configurable in QSys, each board must specify the
	* base address based on it's particular FPGA configuration. Please note
	* that the address here is incremented by 0x400 from the Base address
	* selected in QSys, since the SPI registers are at offset +0x400.
	* #define CONFIG_SYS_SPI_BASE 0xff240400
	*/
	#endif

	/*
	* Ethernet on SoC (EMAC)
	*/
	#if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
	#define CONFIG_DW_ALTDESCRIPTOR
	#define CONFIG_MII
	#define CONFIG_AUTONEG_TIMEOUT (15 * CONFIG_SYS_HZ)
	#define CONFIG_PHYLIB
	#define CONFIG_PHY_GIGE
	#endif

	/*
	* FPGA Driver
	*/
	#ifdef CONFIG_CMD_FPGA
	#define CONFIG_FPGA
	#define CONFIG_FPGA_ALTERA
	#define CONFIG_FPGA_SOCFPGA
	#define CONFIG_FPGA_COUNT 1
	#endif

	/*
	* L4 OSC1 Timer 0
	*/
	/* This timer uses eosc1, whose clock frequency is fixed at any condition. */
	#define CONFIG_SYS_TIMERBASE SOCFPGA_OSC1TIMER0_ADDRESS
	#define CONFIG_SYS_TIMER_COUNTS_DOWN
	#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4)
	#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
	#define CONFIG_SYS_TIMER_RATE 2400000
	#else
	#define CONFIG_SYS_TIMER_RATE 25000000
	#endif

	/*
	* L4 Watchdog
	*/
	#ifdef CONFIG_HW_WATCHDOG
	#define CONFIG_DESIGNWARE_WATCHDOG
	#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS
	#define CONFIG_DW_WDT_CLOCK_KHZ 25000
	#define CONFIG_HW_WATCHDOG_TIMEOUT_MS 30000
	#endif

	/*
	* MMC Driver
	*/
	#ifdef CONFIG_CMD_MMC
	#define CONFIG_MMC
	#define CONFIG_BOUNCE_BUFFER
	#define CONFIG_GENERIC_MMC
	#define CONFIG_DWMMC
	#define CONFIG_SOCFPGA_DWMMC
	#define CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH 1024
	#define CONFIG_SOCFPGA_DWMMC_DRVSEL 3
	#define CONFIG_SOCFPGA_DWMMC_SMPSEL 0
	/* FIXME */
	/* using smaller max blk cnt to avoid flooding the limited stack we have */
	#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 /* FIXME -- SPL only? */
	#endif

	/*
	* I2C support
	*/
	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_DW
	#define CONFIG_SYS_I2C_BUS_MAX 4
	#define CONFIG_SYS_I2C_BASE SOCFPGA_I2C0_ADDRESS
	#define CONFIG_SYS_I2C_BASE1 SOCFPGA_I2C1_ADDRESS
	#define CONFIG_SYS_I2C_BASE2 SOCFPGA_I2C2_ADDRESS
	#define CONFIG_SYS_I2C_BASE3 SOCFPGA_I2C3_ADDRESS
	/* Using standard mode which the speed up to 100Kb/s */
	#define CONFIG_SYS_I2C_SPEED 100000
	#define CONFIG_SYS_I2C_SPEED1 100000
	#define CONFIG_SYS_I2C_SPEED2 100000
	#define CONFIG_SYS_I2C_SPEED3 100000
	/* Address of device when used as slave */
	#define CONFIG_SYS_I2C_SLAVE 0x02
	#define CONFIG_SYS_I2C_SLAVE1 0x02
	#define CONFIG_SYS_I2C_SLAVE2 0x02
	#define CONFIG_SYS_I2C_SLAVE3 0x02
	#ifndef __ASSEMBLY__
	/* Clock supplied to I2C controller in unit of MHz */
	unsigned int cm_get_l4_sp_clk_hz(void);
	#define IC_CLK (cm_get_l4_sp_clk_hz() / 1000000)
	#endif
	#define CONFIG_CMD_I2C

	/*
	* QSPI support
	*/
	/* Enable multiple SPI NOR flash manufacturers */
	#ifndef CONFIG_SPL_BUILD
	#define CONFIG_SPI_FLASH_MTD
	#define CONFIG_CMD_MTDPARTS
	#define CONFIG_MTD_DEVICE
	#define CONFIG_MTD_PARTITIONS
	#define MTDIDS_DEFAULT "nor0=ff705000.spi"
	#endif
	/* QSPI reference clock */
	#ifndef __ASSEMBLY__
	unsigned int cm_get_qspi_controller_clk_hz(void);
	#define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz()
	#endif
	#define CONFIG_CQSPI_DECODER 0
	#define CONFIG_CMD_SF
	#define CONFIG_SPI_FLASH_BAR

	/*
	* Designware SPI support
	*/
	#define CONFIG_CMD_SPI

	/*
	* Serial Driver
	*/
	#define CONFIG_SYS_NS16550_SERIAL
	#define CONFIG_SYS_NS16550_REG_SIZE -4
	#define CONFIG_SYS_NS16550_COM1 SOCFPGA_UART0_ADDRESS
	#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
	#define CONFIG_SYS_NS16550_CLK 1000000
	#else
	#define CONFIG_SYS_NS16550_CLK 100000000
	#endif
	#define CONFIG_CONS_INDEX 1
	#define CONFIG_BAUDRATE 115200

	/*
	* USB
	*/
	#ifdef CONFIG_CMD_USB
	#define CONFIG_USB_DWC2
	#define CONFIG_USB_STORAGE
	/*
	* NOTE: User must define either of the following to select which
	* of the two USB controllers available on SoCFPGA to use.
	* The DWC2 driver doesn't support multiple USB controllers.
	* #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB0_ADDRESS
	* #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS
	*/
	#endif

	/*
	* USB Gadget (DFU, UMS)
	*/
	#if defined(CONFIG_CMD_DFU) \|\| defined(CONFIG_CMD_USB_MASS_STORAGE)
	#define CONFIG_USB_GADGET
	#define CONFIG_USB_GADGET_S3C_UDC_OTG
	#define CONFIG_USB_GADGET_DUALSPEED
	#define CONFIG_USB_GADGET_VBUS_DRAW 2

	/* USB Composite download gadget - g_dnl */
	#define CONFIG_USB_GADGET_DOWNLOAD
	#define CONFIG_USB_FUNCTION_MASS_STORAGE

	#define CONFIG_USB_FUNCTION_DFU
	#define CONFIG_DFU_MMC
	#define CONFIG_SYS_DFU_DATA_BUF_SIZE (32 * 1024 * 1024)
	#define DFU_DEFAULT_POLL_TIMEOUT 300

	/* USB IDs */
	#define CONFIG_G_DNL_VENDOR_NUM 0x0525 /* NetChip */
	#define CONFIG_G_DNL_PRODUCT_NUM 0xA4A5 /* Linux-USB File-backed Storage Gadget */
	#define CONFIG_G_DNL_UMS_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
	#define CONFIG_G_DNL_UMS_PRODUCT_NUM CONFIG_G_DNL_PRODUCT_NUM
	#ifndef CONFIG_G_DNL_MANUFACTURER
	#define CONFIG_G_DNL_MANUFACTURER "Altera"
	#endif
	#endif

	/*
	* U-Boot environment
	*/
	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
	#define CONFIG_ENV_SIZE 4096

	/*
	* SPL
	*
	* SRAM Memory layout:
	*
	* 0xFFFF_0000 ...... Start of SRAM
	* 0xFFFF_xxxx ...... Top of stack (grows down)
	* 0xFFFF_yyyy ...... Malloc area
	* 0xFFFF_zzzz ...... Global Data
	* 0xFFFF_FF00 ...... End of SRAM
	*/
	#define CONFIG_SPL_FRAMEWORK
	#define CONFIG_SPL_RAM_DEVICE
	#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR
	#define CONFIG_SPL_MAX_SIZE (64 * 1024)
	#ifdef CONFIG_SPL_BUILD
	#define CONFIG_SYS_MALLOC_SIMPLE
	#endif

	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	#define CONFIG_SPL_LIBGENERIC_SUPPORT
	#define CONFIG_SPL_WATCHDOG_SUPPORT
	#define CONFIG_SPL_SERIAL_SUPPORT
	#define CONFIG_SPL_MMC_SUPPORT
	#define CONFIG_SPL_SPI_SUPPORT

	/* SPL SDMMC boot support */
	#ifdef CONFIG_SPL_MMC_SUPPORT
	#if defined(CONFIG_SPL_FAT_SUPPORT) \|\| defined(CONFIG_SPL_EXT_SUPPORT)
	#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 2
	#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
	#define CONFIG_SPL_LIBDISK_SUPPORT
	#else
	#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 3
	#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xa00 /* offset 2560 sect (1M+256k) */
	#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */
	#endif
	#endif

	/* SPL QSPI boot support */
	#ifdef CONFIG_SPL_SPI_SUPPORT
	#define CONFIG_DM_SEQ_ALIAS 1
	#define CONFIG_SPL_SPI_FLASH_SUPPORT
	#define CONFIG_SPL_SPI_LOAD
	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
	#endif

	/*
	* Stack setup
	*/
	#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR

	#endif /* __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ */