| /* |
| * max98095.c -- MAX98095 ALSA SoC Audio driver |
| * |
| * Copyright 2011 Maxim Integrated Products |
| * |
| * Modified for uboot by R. Chandrasekar (rcsekar@samsung.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <common.h> |
| #include <asm/arch/clk.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/power.h> |
| #include <asm/gpio.h> |
| #include <asm/io.h> |
| #include <common.h> |
| #include <div64.h> |
| #include <fdtdec.h> |
| #include <i2c.h> |
| #include <sound.h> |
| #include "i2s.h" |
| #include "max98095.h" |
| |
| struct max98095_priv { |
| unsigned int sysclk; |
| unsigned int rate; |
| unsigned int fmt; |
| int i2c_addr; |
| }; |
| |
| static struct sound_codec_info g_codec_info; |
| struct max98095_priv g_max98095_info; |
| |
| /* Index 0 is reserved. */ |
| int rate_table[] = {0, 8000, 11025, 16000, 22050, 24000, 32000, 44100, 48000, |
| 88200, 96000}; |
| |
| /* |
| * Writes value to a device register through i2c |
| * |
| * @param priv Private data for driver |
| * @param reg reg number to be write |
| * @param data data to be writen to the above registor |
| * |
| * @return int value 1 for change, 0 for no change or negative error code. |
| */ |
| static int max98095_i2c_write(struct max98095_priv *priv, unsigned int reg, |
| unsigned char data) |
| { |
| debug("%s: Write Addr : 0x%02X, Data : 0x%02X\n", |
| __func__, reg, data); |
| return i2c_write(priv->i2c_addr, reg, 1, &data, 1); |
| } |
| |
| /* |
| * Read a value from a device register through i2c |
| * |
| * @param priv Private data for driver |
| * @param reg reg number to be read |
| * @param data address of read data to be stored |
| * |
| * @return int value 0 for success, -1 in case of error. |
| */ |
| static unsigned int max98095_i2c_read(struct max98095_priv *priv, |
| unsigned int reg, unsigned char *data) |
| { |
| int ret; |
| |
| ret = i2c_read(priv->i2c_addr, reg, 1, data, 1); |
| if (ret != 0) { |
| debug("%s: Error while reading register %#04x\n", |
| __func__, reg); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * update device register bits through i2c |
| * |
| * @param priv Private data for driver |
| * @param reg codec register |
| * @param mask register mask |
| * @param value new value |
| * |
| * @return int value 0 for success, non-zero error code. |
| */ |
| static int max98095_bic_or(struct max98095_priv *priv, unsigned int reg, |
| unsigned char mask, unsigned char value) |
| { |
| int change, ret = 0; |
| unsigned char old, new; |
| |
| if (max98095_i2c_read(priv, reg, &old) != 0) |
| return -1; |
| new = (old & ~mask) | (value & mask); |
| change = (old != new) ? 1 : 0; |
| if (change) |
| ret = max98095_i2c_write(priv, reg, new); |
| if (ret < 0) |
| return ret; |
| |
| return change; |
| } |
| |
| /* |
| * codec mclk clock divider coefficients based on sampling rate |
| * |
| * @param rate sampling rate |
| * @param value address of indexvalue to be stored |
| * |
| * @return 0 for success or negative error code. |
| */ |
| static int rate_value(int rate, u8 *value) |
| { |
| int i; |
| |
| for (i = 1; i < ARRAY_SIZE(rate_table); i++) { |
| if (rate_table[i] >= rate) { |
| *value = i; |
| return 0; |
| } |
| } |
| *value = 1; |
| |
| return -1; |
| } |
| |
| /* |
| * Sets hw params for max98095 |
| * |
| * @param priv max98095 information pointer |
| * @param rate Sampling rate |
| * @param bits_per_sample Bits per sample |
| * |
| * @return -1 for error and 0 Success. |
| */ |
| static int max98095_hw_params(struct max98095_priv *priv, |
| enum en_max_audio_interface aif_id, |
| unsigned int rate, unsigned int bits_per_sample) |
| { |
| u8 regval; |
| int error; |
| unsigned short M98095_DAI_CLKMODE; |
| unsigned short M98095_DAI_FORMAT; |
| unsigned short M98095_DAI_FILTERS; |
| |
| if (aif_id == AIF1) { |
| M98095_DAI_CLKMODE = M98095_027_DAI1_CLKMODE; |
| M98095_DAI_FORMAT = M98095_02A_DAI1_FORMAT; |
| M98095_DAI_FILTERS = M98095_02E_DAI1_FILTERS; |
| } else { |
| M98095_DAI_CLKMODE = M98095_031_DAI2_CLKMODE; |
| M98095_DAI_FORMAT = M98095_034_DAI2_FORMAT; |
| M98095_DAI_FILTERS = M98095_038_DAI2_FILTERS; |
| } |
| |
| switch (bits_per_sample) { |
| case 16: |
| error = max98095_bic_or(priv, M98095_DAI_FORMAT, M98095_DAI_WS, |
| 0); |
| break; |
| case 24: |
| error = max98095_bic_or(priv, M98095_DAI_FORMAT, M98095_DAI_WS, |
| M98095_DAI_WS); |
| break; |
| default: |
| debug("%s: Illegal bits per sample %d.\n", |
| __func__, bits_per_sample); |
| return -1; |
| } |
| |
| if (rate_value(rate, ®val)) { |
| debug("%s: Failed to set sample rate to %d.\n", |
| __func__, rate); |
| return -1; |
| } |
| priv->rate = rate; |
| |
| error |= max98095_bic_or(priv, M98095_DAI_CLKMODE, M98095_CLKMODE_MASK, |
| regval); |
| |
| /* Update sample rate mode */ |
| if (rate < 50000) |
| error |= max98095_bic_or(priv, M98095_DAI_FILTERS, |
| M98095_DAI_DHF, 0); |
| else |
| error |= max98095_bic_or(priv, M98095_DAI_FILTERS, |
| M98095_DAI_DHF, M98095_DAI_DHF); |
| |
| if (error < 0) { |
| debug("%s: Error setting hardware params.\n", __func__); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Configures Audio interface system clock for the given frequency |
| * |
| * @param priv max98095 information |
| * @param freq Sampling frequency in Hz |
| * |
| * @return -1 for error and 0 success. |
| */ |
| static int max98095_set_sysclk(struct max98095_priv *priv, unsigned int freq) |
| { |
| int error = 0; |
| |
| /* Requested clock frequency is already setup */ |
| if (freq == priv->sysclk) |
| return 0; |
| |
| /* Setup clocks for slave mode, and using the PLL |
| * PSCLK = 0x01 (when master clk is 10MHz to 20MHz) |
| * 0x02 (when master clk is 20MHz to 40MHz).. |
| * 0x03 (when master clk is 40MHz to 60MHz).. |
| */ |
| if ((freq >= 10000000) && (freq < 20000000)) { |
| error = max98095_i2c_write(priv, M98095_026_SYS_CLK, 0x10); |
| } else if ((freq >= 20000000) && (freq < 40000000)) { |
| error = max98095_i2c_write(priv, M98095_026_SYS_CLK, 0x20); |
| } else if ((freq >= 40000000) && (freq < 60000000)) { |
| error = max98095_i2c_write(priv, M98095_026_SYS_CLK, 0x30); |
| } else { |
| debug("%s: Invalid master clock frequency\n", __func__); |
| return -1; |
| } |
| |
| debug("%s: Clock at %uHz\n", __func__, freq); |
| |
| if (error < 0) |
| return -1; |
| |
| priv->sysclk = freq; |
| return 0; |
| } |
| |
| /* |
| * Sets Max98095 I2S format |
| * |
| * @param priv max98095 information |
| * @param fmt i2S format - supports a subset of the options defined |
| * in i2s.h. |
| * |
| * @return -1 for error and 0 Success. |
| */ |
| static int max98095_set_fmt(struct max98095_priv *priv, int fmt, |
| enum en_max_audio_interface aif_id) |
| { |
| u8 regval = 0; |
| int error = 0; |
| unsigned short M98095_DAI_CLKCFG_HI; |
| unsigned short M98095_DAI_CLKCFG_LO; |
| unsigned short M98095_DAI_FORMAT; |
| unsigned short M98095_DAI_CLOCK; |
| |
| if (fmt == priv->fmt) |
| return 0; |
| |
| priv->fmt = fmt; |
| |
| if (aif_id == AIF1) { |
| M98095_DAI_CLKCFG_HI = M98095_028_DAI1_CLKCFG_HI; |
| M98095_DAI_CLKCFG_LO = M98095_029_DAI1_CLKCFG_LO; |
| M98095_DAI_FORMAT = M98095_02A_DAI1_FORMAT; |
| M98095_DAI_CLOCK = M98095_02B_DAI1_CLOCK; |
| } else { |
| M98095_DAI_CLKCFG_HI = M98095_032_DAI2_CLKCFG_HI; |
| M98095_DAI_CLKCFG_LO = M98095_033_DAI2_CLKCFG_LO; |
| M98095_DAI_FORMAT = M98095_034_DAI2_FORMAT; |
| M98095_DAI_CLOCK = M98095_035_DAI2_CLOCK; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBS_CFS: |
| /* Slave mode PLL */ |
| error |= max98095_i2c_write(priv, M98095_DAI_CLKCFG_HI, 0x80); |
| error |= max98095_i2c_write(priv, M98095_DAI_CLKCFG_LO, 0x00); |
| break; |
| case SND_SOC_DAIFMT_CBM_CFM: |
| /* Set to master mode */ |
| regval |= M98095_DAI_MAS; |
| break; |
| case SND_SOC_DAIFMT_CBS_CFM: |
| case SND_SOC_DAIFMT_CBM_CFS: |
| default: |
| debug("%s: Clock mode unsupported\n", __func__); |
| return -1; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_I2S: |
| regval |= M98095_DAI_DLY; |
| break; |
| case SND_SOC_DAIFMT_LEFT_J: |
| break; |
| default: |
| debug("%s: Unrecognized format.\n", __func__); |
| return -1; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_NB_NF: |
| break; |
| case SND_SOC_DAIFMT_NB_IF: |
| regval |= M98095_DAI_WCI; |
| break; |
| case SND_SOC_DAIFMT_IB_NF: |
| regval |= M98095_DAI_BCI; |
| break; |
| case SND_SOC_DAIFMT_IB_IF: |
| regval |= M98095_DAI_BCI | M98095_DAI_WCI; |
| break; |
| default: |
| debug("%s: Unrecognized inversion settings.\n", __func__); |
| return -1; |
| } |
| |
| error |= max98095_bic_or(priv, M98095_DAI_FORMAT, |
| M98095_DAI_MAS | M98095_DAI_DLY | |
| M98095_DAI_BCI | M98095_DAI_WCI, regval); |
| |
| error |= max98095_i2c_write(priv, M98095_DAI_CLOCK, M98095_DAI_BSEL64); |
| |
| if (error < 0) { |
| debug("%s: Error setting i2s format.\n", __func__); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * resets the audio codec |
| * |
| * @param priv Private data for driver |
| * @return -1 for error and 0 success. |
| */ |
| static int max98095_reset(struct max98095_priv *priv) |
| { |
| int i, ret; |
| |
| /* |
| * Gracefully reset the DSP core and the codec hardware in a proper |
| * sequence. |
| */ |
| ret = max98095_i2c_write(priv, M98095_00F_HOST_CFG, 0); |
| if (ret != 0) { |
| debug("%s: Failed to reset DSP: %d\n", __func__, ret); |
| return ret; |
| } |
| |
| ret = max98095_i2c_write(priv, M98095_097_PWR_SYS, 0); |
| if (ret != 0) { |
| debug("%s: Failed to reset codec: %d\n", __func__, ret); |
| return ret; |
| } |
| |
| /* |
| * Reset to hardware default for registers, as there is not a soft |
| * reset hardware control register. |
| */ |
| for (i = M98095_010_HOST_INT_CFG; i < M98095_REG_MAX_CACHED; i++) { |
| ret = max98095_i2c_write(priv, i, 0); |
| if (ret < 0) { |
| debug("%s: Failed to reset: %d\n", __func__, ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Intialise max98095 codec device |
| * |
| * @param priv max98095 information |
| * |
| * @returns -1 for error and 0 Success. |
| */ |
| static int max98095_device_init(struct max98095_priv *priv) |
| { |
| unsigned char id; |
| int error = 0; |
| |
| /* Enable codec clock */ |
| set_xclkout(); |
| |
| /* reset the codec, the DSP core, and disable all interrupts */ |
| error = max98095_reset(priv); |
| if (error != 0) { |
| debug("Reset\n"); |
| return error; |
| } |
| |
| /* initialize private data */ |
| priv->sysclk = -1U; |
| priv->rate = -1U; |
| priv->fmt = -1U; |
| |
| error = max98095_i2c_read(priv, M98095_0FF_REV_ID, &id); |
| if (error < 0) { |
| debug("%s: Failure reading hardware revision: %d\n", |
| __func__, id); |
| return error; |
| } |
| debug("%s: Hardware revision: %c\n", __func__, (id - 0x40) + 'A'); |
| |
| return 0; |
| } |
| |
| static int max98095_setup_interface(struct max98095_priv *priv, |
| enum en_max_audio_interface aif_id) |
| { |
| int error; |
| |
| error = max98095_i2c_write(priv, M98095_097_PWR_SYS, M98095_PWRSV); |
| |
| /* |
| * initialize registers to hardware default configuring audio |
| * interface2 to DAC |
| */ |
| if (aif_id == AIF1) |
| error |= max98095_i2c_write(priv, M98095_048_MIX_DAC_LR, |
| M98095_DAI1L_TO_DACL | |
| M98095_DAI1R_TO_DACR); |
| else |
| error |= max98095_i2c_write(priv, M98095_048_MIX_DAC_LR, |
| M98095_DAI2M_TO_DACL | |
| M98095_DAI2M_TO_DACR); |
| |
| error |= max98095_i2c_write(priv, M98095_092_PWR_EN_OUT, |
| M98095_SPK_SPREADSPECTRUM); |
| error |= max98095_i2c_write(priv, M98095_04E_CFG_HP, M98095_HPNORMAL); |
| if (aif_id == AIF1) |
| error |= max98095_i2c_write(priv, M98095_02C_DAI1_IOCFG, |
| M98095_S1NORMAL | M98095_SDATA); |
| else |
| error |= max98095_i2c_write(priv, M98095_036_DAI2_IOCFG, |
| M98095_S2NORMAL | M98095_SDATA); |
| |
| /* take the codec out of the shut down */ |
| error |= max98095_bic_or(priv, M98095_097_PWR_SYS, M98095_SHDNRUN, |
| M98095_SHDNRUN); |
| /* |
| * route DACL and DACR output to HO and Speakers |
| * Ordering: DACL, DACR, DACL, DACR |
| */ |
| error |= max98095_i2c_write(priv, M98095_050_MIX_SPK_LEFT, 0x01); |
| error |= max98095_i2c_write(priv, M98095_051_MIX_SPK_RIGHT, 0x01); |
| error |= max98095_i2c_write(priv, M98095_04C_MIX_HP_LEFT, 0x01); |
| error |= max98095_i2c_write(priv, M98095_04D_MIX_HP_RIGHT, 0x01); |
| |
| /* power Enable */ |
| error |= max98095_i2c_write(priv, M98095_091_PWR_EN_OUT, 0xF3); |
| |
| /* set Volume */ |
| error |= max98095_i2c_write(priv, M98095_064_LVL_HP_L, 15); |
| error |= max98095_i2c_write(priv, M98095_065_LVL_HP_R, 15); |
| error |= max98095_i2c_write(priv, M98095_067_LVL_SPK_L, 16); |
| error |= max98095_i2c_write(priv, M98095_068_LVL_SPK_R, 16); |
| |
| /* Enable DAIs */ |
| error |= max98095_i2c_write(priv, M98095_093_BIAS_CTRL, 0x30); |
| if (aif_id == AIF1) |
| error |= max98095_i2c_write(priv, M98095_096_PWR_DAC_CK, 0x01); |
| else |
| error |= max98095_i2c_write(priv, M98095_096_PWR_DAC_CK, 0x07); |
| |
| if (error < 0) |
| return -1; |
| |
| return 0; |
| } |
| |
| static int max98095_do_init(struct sound_codec_info *pcodec_info, |
| enum en_max_audio_interface aif_id, |
| int sampling_rate, int mclk_freq, |
| int bits_per_sample) |
| { |
| int ret = 0; |
| |
| ret = max98095_setup_interface(&g_max98095_info, aif_id); |
| if (ret < 0) { |
| debug("%s: max98095 codec chip init failed\n", __func__); |
| return ret; |
| } |
| |
| ret = max98095_set_sysclk(&g_max98095_info, mclk_freq); |
| if (ret < 0) { |
| debug("%s: max98095 codec set sys clock failed\n", __func__); |
| return ret; |
| } |
| |
| ret = max98095_hw_params(&g_max98095_info, aif_id, sampling_rate, |
| bits_per_sample); |
| |
| if (ret == 0) { |
| ret = max98095_set_fmt(&g_max98095_info, |
| SND_SOC_DAIFMT_I2S | |
| SND_SOC_DAIFMT_NB_NF | |
| SND_SOC_DAIFMT_CBS_CFS, |
| aif_id); |
| } |
| |
| return ret; |
| } |
| |
| static int get_max98095_codec_values(struct sound_codec_info *pcodec_info, |
| const void *blob) |
| { |
| int error = 0; |
| enum fdt_compat_id compat; |
| int node; |
| int parent; |
| |
| /* Get the node from FDT for codec */ |
| node = fdtdec_next_compatible(blob, 0, COMPAT_MAXIM_98095_CODEC); |
| if (node <= 0) { |
| debug("EXYNOS_SOUND: No node for codec in device tree\n"); |
| debug("node = %d\n", node); |
| return -1; |
| } |
| |
| parent = fdt_parent_offset(blob, node); |
| if (parent < 0) { |
| debug("%s: Cannot find node parent\n", __func__); |
| return -1; |
| } |
| |
| compat = fdtdec_lookup(blob, parent); |
| switch (compat) { |
| case COMPAT_SAMSUNG_S3C2440_I2C: |
| pcodec_info->i2c_bus = i2c_get_bus_num_fdt(parent); |
| error |= pcodec_info->i2c_bus; |
| debug("i2c bus = %d\n", pcodec_info->i2c_bus); |
| pcodec_info->i2c_dev_addr = fdtdec_get_int(blob, node, |
| "reg", 0); |
| error |= pcodec_info->i2c_dev_addr; |
| debug("i2c dev addr = %x\n", pcodec_info->i2c_dev_addr); |
| break; |
| default: |
| debug("%s: Unknown compat id %d\n", __func__, compat); |
| return -1; |
| } |
| if (error == -1) { |
| debug("fail to get max98095 codec node properties\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* max98095 Device Initialisation */ |
| int max98095_init(const void *blob, enum en_max_audio_interface aif_id, |
| int sampling_rate, int mclk_freq, |
| int bits_per_sample) |
| { |
| int ret; |
| int old_bus = i2c_get_bus_num(); |
| struct sound_codec_info *pcodec_info = &g_codec_info; |
| |
| if (get_max98095_codec_values(pcodec_info, blob) < 0) { |
| debug("FDT Codec values failed\n"); |
| return -1; |
| } |
| |
| i2c_set_bus_num(pcodec_info->i2c_bus); |
| |
| /* shift the device address by 1 for 7 bit addressing */ |
| g_max98095_info.i2c_addr = pcodec_info->i2c_dev_addr >> 1; |
| ret = max98095_device_init(&g_max98095_info); |
| if (ret < 0) { |
| debug("%s: max98095 codec chip init failed\n", __func__); |
| return ret; |
| } |
| |
| ret = max98095_do_init(pcodec_info, aif_id, sampling_rate, mclk_freq, |
| bits_per_sample); |
| i2c_set_bus_num(old_bus); |
| |
| return ret; |
| } |