blob: ed1b9b630eba0a436f34c0f4dc014c817237dd36 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Generic DWC3 Glue layer
*
* Copyright (C) 2016 - 2018 Xilinx, Inc.
*
* Based on dwc3-omap.c.
*/
#include <common.h>
#include <cpu_func.h>
#include <log.h>
#include <dm.h>
#include <dm/device-internal.h>
#include <dm/lists.h>
#include <dwc3-uboot.h>
#include <generic-phy.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <malloc.h>
#include <usb.h>
#include "core.h"
#include "gadget.h"
#include <reset.h>
#include <clk.h>
#include <usb/xhci.h>
#include <asm/gpio.h>
struct dwc3_glue_data {
struct clk_bulk clks;
struct reset_ctl_bulk resets;
fdt_addr_t regs;
};
struct dwc3_generic_plat {
fdt_addr_t base;
u32 maximum_speed;
enum usb_dr_mode dr_mode;
};
struct dwc3_generic_priv {
void *base;
struct dwc3 dwc3;
struct phy_bulk phys;
struct gpio_desc *ulpi_reset;
};
struct dwc3_generic_host_priv {
struct xhci_ctrl xhci_ctrl;
struct dwc3_generic_priv gen_priv;
};
static int dwc3_generic_probe(struct udevice *dev,
struct dwc3_generic_priv *priv)
{
int rc;
struct dwc3_generic_plat *plat = dev_get_plat(dev);
struct dwc3 *dwc3 = &priv->dwc3;
struct dwc3_glue_data *glue = dev_get_plat(dev->parent);
int __maybe_unused index;
ofnode __maybe_unused node;
dwc3->dev = dev;
dwc3->maximum_speed = plat->maximum_speed;
dwc3->dr_mode = plat->dr_mode;
#if CONFIG_IS_ENABLED(OF_CONTROL)
dwc3_of_parse(dwc3);
node = dev_ofnode(dev->parent);
index = ofnode_stringlist_search(node, "clock-names", "ref");
if (index < 0)
index = ofnode_stringlist_search(node, "clock-names", "ref_clk");
if (index >= 0)
dwc3->ref_clk = &glue->clks.clks[index];
#endif
/*
* It must hold whole USB3.0 OTG controller in resetting to hold pipe
* power state in P2 before initializing TypeC PHY on RK3399 platform.
*/
if (device_is_compatible(dev->parent, "rockchip,rk3399-dwc3")) {
reset_assert_bulk(&glue->resets);
udelay(1);
}
rc = dwc3_setup_phy(dev, &priv->phys);
if (rc && rc != -ENOTSUPP)
return rc;
if (CONFIG_IS_ENABLED(DM_GPIO) &&
device_is_compatible(dev->parent, "xlnx,zynqmp-dwc3")) {
priv->ulpi_reset = devm_gpiod_get_optional(dev->parent, "reset",
GPIOD_ACTIVE_LOW);
/* property is optional, don't return error! */
if (priv->ulpi_reset) {
/* Toggle ulpi to reset the phy. */
rc = dm_gpio_set_value(priv->ulpi_reset, 1);
if (rc)
return rc;
mdelay(5);
rc = dm_gpio_set_value(priv->ulpi_reset, 0);
if (rc)
return rc;
mdelay(5);
}
}
if (device_is_compatible(dev->parent, "rockchip,rk3399-dwc3"))
reset_deassert_bulk(&glue->resets);
priv->base = map_physmem(plat->base, DWC3_OTG_REGS_END, MAP_NOCACHE);
dwc3->regs = priv->base + DWC3_GLOBALS_REGS_START;
rc = dwc3_init(dwc3);
if (rc) {
unmap_physmem(priv->base, MAP_NOCACHE);
return rc;
}
return 0;
}
static int dwc3_generic_remove(struct udevice *dev,
struct dwc3_generic_priv *priv)
{
struct dwc3 *dwc3 = &priv->dwc3;
if (CONFIG_IS_ENABLED(DM_GPIO) &&
device_is_compatible(dev->parent, "xlnx,zynqmp-dwc3")) {
struct gpio_desc *ulpi_reset = priv->ulpi_reset;
dm_gpio_free(ulpi_reset->dev, ulpi_reset);
}
dwc3_remove(dwc3);
dwc3_shutdown_phy(dev, &priv->phys);
unmap_physmem(dwc3->regs, MAP_NOCACHE);
return 0;
}
static int dwc3_generic_of_to_plat(struct udevice *dev)
{
struct dwc3_generic_plat *plat = dev_get_plat(dev);
ofnode node = dev_ofnode(dev);
if (!strncmp(dev->name, "port", 4) || !strncmp(dev->name, "hub", 3)) {
/* This is a leaf so check the parent */
plat->base = dev_read_addr(dev->parent);
} else {
plat->base = dev_read_addr(dev);
}
plat->maximum_speed = usb_get_maximum_speed(node);
if (plat->maximum_speed == USB_SPEED_UNKNOWN) {
pr_info("No USB maximum speed specified. Using super speed\n");
plat->maximum_speed = USB_SPEED_SUPER;
}
plat->dr_mode = usb_get_dr_mode(node);
if (plat->dr_mode == USB_DR_MODE_UNKNOWN) {
/* might be a leaf so check the parent for mode */
node = dev_ofnode(dev->parent);
plat->dr_mode = usb_get_dr_mode(node);
if (plat->dr_mode == USB_DR_MODE_UNKNOWN) {
pr_err("Invalid usb mode setup\n");
return -ENODEV;
}
}
return 0;
}
#if CONFIG_IS_ENABLED(DM_USB_GADGET)
int dm_usb_gadget_handle_interrupts(struct udevice *dev)
{
struct dwc3_generic_priv *priv = dev_get_priv(dev);
struct dwc3 *dwc3 = &priv->dwc3;
dwc3_gadget_uboot_handle_interrupt(dwc3);
return 0;
}
static int dwc3_generic_peripheral_probe(struct udevice *dev)
{
struct dwc3_generic_priv *priv = dev_get_priv(dev);
return dwc3_generic_probe(dev, priv);
}
static int dwc3_generic_peripheral_remove(struct udevice *dev)
{
struct dwc3_generic_priv *priv = dev_get_priv(dev);
return dwc3_generic_remove(dev, priv);
}
U_BOOT_DRIVER(dwc3_generic_peripheral) = {
.name = "dwc3-generic-peripheral",
.id = UCLASS_USB_GADGET_GENERIC,
.of_to_plat = dwc3_generic_of_to_plat,
.probe = dwc3_generic_peripheral_probe,
.remove = dwc3_generic_peripheral_remove,
.priv_auto = sizeof(struct dwc3_generic_priv),
.plat_auto = sizeof(struct dwc3_generic_plat),
};
#endif
#if defined(CONFIG_SPL_USB_HOST) || \
!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST)
static int dwc3_generic_host_probe(struct udevice *dev)
{
struct xhci_hcor *hcor;
struct xhci_hccr *hccr;
struct dwc3_generic_host_priv *priv = dev_get_priv(dev);
int rc;
rc = dwc3_generic_probe(dev, &priv->gen_priv);
if (rc)
return rc;
hccr = (struct xhci_hccr *)priv->gen_priv.base;
hcor = (struct xhci_hcor *)(priv->gen_priv.base +
HC_LENGTH(xhci_readl(&(hccr)->cr_capbase)));
return xhci_register(dev, hccr, hcor);
}
static int dwc3_generic_host_remove(struct udevice *dev)
{
struct dwc3_generic_host_priv *priv = dev_get_priv(dev);
int rc;
rc = xhci_deregister(dev);
if (rc)
return rc;
return dwc3_generic_remove(dev, &priv->gen_priv);
}
U_BOOT_DRIVER(dwc3_generic_host) = {
.name = "dwc3-generic-host",
.id = UCLASS_USB,
.of_to_plat = dwc3_generic_of_to_plat,
.probe = dwc3_generic_host_probe,
.remove = dwc3_generic_host_remove,
.priv_auto = sizeof(struct dwc3_generic_host_priv),
.plat_auto = sizeof(struct dwc3_generic_plat),
.ops = &xhci_usb_ops,
.flags = DM_FLAG_ALLOC_PRIV_DMA,
};
#endif
struct dwc3_glue_ops {
void (*glue_configure)(struct udevice *dev, int index,
enum usb_dr_mode mode);
};
void dwc3_imx8mp_glue_configure(struct udevice *dev, int index,
enum usb_dr_mode mode)
{
/* USB glue registers */
#define USB_CTRL0 0x00
#define USB_CTRL1 0x04
#define USB_CTRL0_PORTPWR_EN BIT(12) /* 1 - PPC enabled (default) */
#define USB_CTRL0_USB3_FIXED BIT(22) /* 1 - USB3 permanent attached */
#define USB_CTRL0_USB2_FIXED BIT(23) /* 1 - USB2 permanent attached */
#define USB_CTRL1_OC_POLARITY BIT(16) /* 0 - HIGH / 1 - LOW */
#define USB_CTRL1_PWR_POLARITY BIT(17) /* 0 - HIGH / 1 - LOW */
fdt_addr_t regs = dev_read_addr_index(dev, 1);
void *base = map_physmem(regs, 0x8, MAP_NOCACHE);
u32 value;
value = readl(base + USB_CTRL0);
if (dev_read_bool(dev, "fsl,permanently-attached"))
value |= (USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED);
else
value &= ~(USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED);
if (dev_read_bool(dev, "fsl,disable-port-power-control"))
value &= ~(USB_CTRL0_PORTPWR_EN);
else
value |= USB_CTRL0_PORTPWR_EN;
writel(value, base + USB_CTRL0);
value = readl(base + USB_CTRL1);
if (dev_read_bool(dev, "fsl,over-current-active-low"))
value |= USB_CTRL1_OC_POLARITY;
else
value &= ~USB_CTRL1_OC_POLARITY;
if (dev_read_bool(dev, "fsl,power-active-low"))
value |= USB_CTRL1_PWR_POLARITY;
else
value &= ~USB_CTRL1_PWR_POLARITY;
writel(value, base + USB_CTRL1);
unmap_physmem(base, MAP_NOCACHE);
}
struct dwc3_glue_ops imx8mp_ops = {
.glue_configure = dwc3_imx8mp_glue_configure,
};
void dwc3_ti_glue_configure(struct udevice *dev, int index,
enum usb_dr_mode mode)
{
#define USBOTGSS_UTMI_OTG_STATUS 0x0084
#define USBOTGSS_UTMI_OTG_OFFSET 0x0480
/* UTMI_OTG_STATUS REGISTER */
#define USBOTGSS_UTMI_OTG_STATUS_SW_MODE BIT(31)
#define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT BIT(9)
#define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE BIT(8)
#define USBOTGSS_UTMI_OTG_STATUS_IDDIG BIT(4)
#define USBOTGSS_UTMI_OTG_STATUS_SESSEND BIT(3)
#define USBOTGSS_UTMI_OTG_STATUS_SESSVALID BIT(2)
#define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID BIT(1)
enum dwc3_omap_utmi_mode {
DWC3_OMAP_UTMI_MODE_UNKNOWN = 0,
DWC3_OMAP_UTMI_MODE_HW,
DWC3_OMAP_UTMI_MODE_SW,
};
u32 use_id_pin;
u32 host_mode;
u32 reg;
u32 utmi_mode;
u32 utmi_status_offset = USBOTGSS_UTMI_OTG_STATUS;
struct dwc3_glue_data *glue = dev_get_plat(dev);
void *base = map_physmem(glue->regs, 0x10000, MAP_NOCACHE);
if (device_is_compatible(dev, "ti,am437x-dwc3"))
utmi_status_offset += USBOTGSS_UTMI_OTG_OFFSET;
utmi_mode = dev_read_u32_default(dev, "utmi-mode",
DWC3_OMAP_UTMI_MODE_UNKNOWN);
if (utmi_mode != DWC3_OMAP_UTMI_MODE_HW) {
debug("%s: OTG is not supported. defaulting to PERIPHERAL\n",
dev->name);
mode = USB_DR_MODE_PERIPHERAL;
}
switch (mode) {
case USB_DR_MODE_PERIPHERAL:
use_id_pin = 0;
host_mode = 0;
break;
case USB_DR_MODE_HOST:
use_id_pin = 0;
host_mode = 1;
break;
case USB_DR_MODE_OTG:
default:
use_id_pin = 1;
host_mode = 0;
break;
}
reg = readl(base + utmi_status_offset);
reg &= ~(USBOTGSS_UTMI_OTG_STATUS_SW_MODE);
if (!use_id_pin)
reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
writel(reg, base + utmi_status_offset);
reg &= ~(USBOTGSS_UTMI_OTG_STATUS_SESSEND |
USBOTGSS_UTMI_OTG_STATUS_VBUSVALID |
USBOTGSS_UTMI_OTG_STATUS_IDDIG);
reg |= USBOTGSS_UTMI_OTG_STATUS_SESSVALID |
USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT;
if (!host_mode)
reg |= USBOTGSS_UTMI_OTG_STATUS_IDDIG |
USBOTGSS_UTMI_OTG_STATUS_VBUSVALID;
writel(reg, base + utmi_status_offset);
unmap_physmem(base, MAP_NOCACHE);
}
struct dwc3_glue_ops ti_ops = {
.glue_configure = dwc3_ti_glue_configure,
};
static int dwc3_glue_bind(struct udevice *parent)
{
ofnode node;
int ret;
enum usb_dr_mode dr_mode;
dr_mode = usb_get_dr_mode(dev_ofnode(parent));
ofnode_for_each_subnode(node, dev_ofnode(parent)) {
const char *name = ofnode_get_name(node);
struct udevice *dev;
const char *driver = NULL;
debug("%s: subnode name: %s\n", __func__, name);
/* if the parent node doesn't have a mode check the leaf */
if (!dr_mode)
dr_mode = usb_get_dr_mode(node);
switch (dr_mode) {
case USB_DR_MODE_PERIPHERAL:
case USB_DR_MODE_OTG:
#if CONFIG_IS_ENABLED(DM_USB_GADGET)
debug("%s: dr_mode: OTG or Peripheral\n", __func__);
driver = "dwc3-generic-peripheral";
#endif
break;
#if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_SPL_BUILD)
case USB_DR_MODE_HOST:
debug("%s: dr_mode: HOST\n", __func__);
driver = "dwc3-generic-host";
break;
#endif
default:
debug("%s: unsupported dr_mode\n", __func__);
return -ENODEV;
};
if (!driver)
continue;
ret = device_bind_driver_to_node(parent, driver, name,
node, &dev);
if (ret) {
debug("%s: not able to bind usb device mode\n",
__func__);
return ret;
}
}
return 0;
}
static int dwc3_glue_reset_init(struct udevice *dev,
struct dwc3_glue_data *glue)
{
int ret;
ret = reset_get_bulk(dev, &glue->resets);
if (ret == -ENOTSUPP || ret == -ENOENT)
return 0;
else if (ret)
return ret;
ret = reset_deassert_bulk(&glue->resets);
if (ret) {
reset_release_bulk(&glue->resets);
return ret;
}
return 0;
}
static int dwc3_glue_clk_init(struct udevice *dev,
struct dwc3_glue_data *glue)
{
int ret;
ret = clk_get_bulk(dev, &glue->clks);
if (ret == -ENOSYS || ret == -ENOENT)
return 0;
if (ret)
return ret;
#if CONFIG_IS_ENABLED(CLK)
ret = clk_enable_bulk(&glue->clks);
if (ret) {
clk_release_bulk(&glue->clks);
return ret;
}
#endif
return 0;
}
static int dwc3_glue_probe(struct udevice *dev)
{
struct dwc3_glue_ops *ops = (struct dwc3_glue_ops *)dev_get_driver_data(dev);
struct dwc3_glue_data *glue = dev_get_plat(dev);
struct udevice *child = NULL;
int index = 0;
int ret;
struct phy phy;
ret = generic_phy_get_by_name(dev, "usb3-phy", &phy);
if (!ret) {
ret = generic_phy_init(&phy);
if (ret)
return ret;
} else if (ret != -ENOENT && ret != -ENODATA) {
debug("could not get phy (err %d)\n", ret);
return ret;
} else {
phy.dev = NULL;
}
glue->regs = dev_read_addr(dev);
ret = dwc3_glue_clk_init(dev, glue);
if (ret)
return ret;
ret = dwc3_glue_reset_init(dev, glue);
if (ret)
return ret;
if (phy.dev) {
ret = generic_phy_power_on(&phy);
if (ret)
return ret;
}
ret = device_find_first_child(dev, &child);
if (ret)
return ret;
if (glue->resets.count == 0) {
ret = dwc3_glue_reset_init(child, glue);
if (ret)
return ret;
}
while (child) {
enum usb_dr_mode dr_mode;
dr_mode = usb_get_dr_mode(dev_ofnode(child));
device_find_next_child(&child);
if (ops && ops->glue_configure)
ops->glue_configure(dev, index, dr_mode);
index++;
}
return 0;
}
static int dwc3_glue_remove(struct udevice *dev)
{
struct dwc3_glue_data *glue = dev_get_plat(dev);
reset_release_bulk(&glue->resets);
clk_release_bulk(&glue->clks);
return 0;
}
static const struct udevice_id dwc3_glue_ids[] = {
{ .compatible = "xlnx,zynqmp-dwc3" },
{ .compatible = "xlnx,versal-dwc3" },
{ .compatible = "ti,keystone-dwc3"},
{ .compatible = "ti,dwc3", .data = (ulong)&ti_ops },
{ .compatible = "ti,am437x-dwc3", .data = (ulong)&ti_ops },
{ .compatible = "ti,am654-dwc3" },
{ .compatible = "rockchip,rk3328-dwc3" },
{ .compatible = "rockchip,rk3399-dwc3" },
{ .compatible = "qcom,dwc3" },
{ .compatible = "fsl,imx8mp-dwc3", .data = (ulong)&imx8mp_ops },
{ .compatible = "fsl,imx8mq-dwc3" },
{ .compatible = "intel,tangier-dwc3" },
{ }
};
U_BOOT_DRIVER(dwc3_generic_wrapper) = {
.name = "dwc3-generic-wrapper",
.id = UCLASS_NOP,
.of_match = dwc3_glue_ids,
.bind = dwc3_glue_bind,
.probe = dwc3_glue_probe,
.remove = dwc3_glue_remove,
.plat_auto = sizeof(struct dwc3_glue_data),
};