| // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) |
| /* |
| * Copyright 2018-2022 TQ-Systems GmbH |
| * Author: Markus Niebel <Markus.Niebel@tq-group.com> |
| */ |
| |
| / { |
| model = "TQ-Systems MBA6ULx Baseboard"; |
| |
| aliases { |
| mmc0 = &usdhc2; |
| mmc1 = &usdhc1; |
| rtc0 = &rtc0; |
| rtc1 = &snvs_rtc; |
| }; |
| |
| chosen { |
| stdout-path = &uart1; |
| }; |
| |
| backlight: backlight { |
| compatible = "pwm-backlight"; |
| power-supply = <®_mba6ul_3v3>; |
| enable-gpios = <&expander_out0 4 GPIO_ACTIVE_HIGH>; |
| status = "disabled"; |
| }; |
| |
| beeper: beeper { |
| compatible = "gpio-beeper"; |
| gpios = <&expander_out1 6 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| gpio_buttons: gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_buttons>; |
| |
| button-1 { |
| label = "s14"; |
| linux,code = <KEY_1>; |
| gpios = <&expander_in0 0 GPIO_ACTIVE_LOW>; |
| wakeup-source; |
| }; |
| |
| button-2 { |
| label = "s6"; |
| linux,code = <KEY_2>; |
| gpios = <&expander_in0 1 GPIO_ACTIVE_LOW>; |
| wakeup-source; |
| }; |
| |
| button-3 { |
| label = "s7"; |
| linux,code = <KEY_3>; |
| gpios = <&expander_in0 2 GPIO_ACTIVE_LOW>; |
| wakeup-source; |
| }; |
| |
| power-button { |
| label = "POWER"; |
| linux,code = <KEY_POWER>; |
| gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; |
| wakeup-source; |
| }; |
| }; |
| |
| gpio-leds { |
| compatible = "gpio-leds"; |
| status = "okay"; |
| |
| led1 { |
| label = "led1"; |
| gpios = <&expander_out1 4 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "default-on"; |
| }; |
| |
| led2 { |
| label = "led2"; |
| gpios = <&expander_out1 5 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| }; |
| |
| reg_lcd_pwr: regulator-lcd-pwr { |
| compatible = "regulator-fixed"; |
| regulator-name = "lcd-pwr"; |
| gpio = <&expander_out0 1 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| status = "disabled"; |
| }; |
| |
| reg_mba6ul_3v3: regulator-mba6ul-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "supply-mba6ul-3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| reg_mba6ul_5v0: regulator-mba6ul-5v0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "supply-mba6ul-5v0"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| }; |
| |
| reg_mpcie: regulator-mpcie-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "mpcie-3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&expander_out0 2 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-always-on; |
| startup-delay-us = <500000>; |
| vin-supply = <®_mba6ul_3v3>; |
| }; |
| |
| reg_otg2vbus_5v0: regulator-otg2-vbus-5v0 { |
| compatible = "regulator-fixed"; |
| gpio = <&expander_out1 0 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-name = "otg2-vbus-supply-5v0"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| vin-supply = <®_mpcie>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| linux,cma { |
| compatible = "shared-dma-pool"; |
| reusable; |
| size = <0x6000000>; |
| linux,cma-default; |
| }; |
| }; |
| |
| sound { |
| compatible = "fsl,imx-audio-tlv320aic32x4"; |
| model = "imx-audio-tlv320aic32x4"; |
| ssi-controller = <&sai1>; |
| audio-codec = <&tlv320aic32x4>; |
| audio-asrc = <&asrc>; |
| }; |
| }; |
| |
| &can1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| xceiver-supply = <®_mba6ul_3v3>; |
| status = "okay"; |
| }; |
| |
| &can2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| xceiver-supply = <®_mba6ul_3v3>; |
| status = "okay"; |
| }; |
| |
| &clks { |
| assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; |
| assigned-clock-rates = <768000000>; |
| }; |
| |
| &ecspi2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi2>; |
| num-cs = <1>; |
| status = "okay"; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet1>; |
| phy-mode = "rmii"; |
| phy-handle = <ðphy0>; |
| phy-supply = <®_mba6ul_3v3>; |
| phy-reset-gpios = <&expander_out1 1 GPIO_ACTIVE_LOW>; |
| phy-reset-duration = <25>; |
| phy-reset-post-delay = <1>; |
| status = "okay"; |
| }; |
| |
| &fec2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_mdc>; |
| phy-mode = "rmii"; |
| phy-handle = <ðphy1>; |
| phy-supply = <®_mba6ul_3v3>; |
| phy-reset-gpios = <&expander_out1 2 GPIO_ACTIVE_LOW>; |
| phy-reset-duration = <25>; |
| phy-reset-post-delay = <1>; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| clocks = <&clks IMX6UL_CLK_ENET_REF>; |
| reg = <0>; |
| max-speed = <100>; |
| }; |
| |
| ethphy1: ethernet-phy@1 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>; |
| reg = <1>; |
| max-speed = <100>; |
| }; |
| }; |
| }; |
| |
| &i2c4 { |
| tlv320aic32x4: audio-codec@18 { |
| compatible = "ti,tlv320aic32x4"; |
| reg = <0x18>; |
| clocks = <&clks IMX6UL_CLK_SAI1>; |
| clock-names = "mclk"; |
| ldoin-supply = <®_mba6ul_3v3>; |
| iov-supply = <®_mba6ul_3v3>; |
| }; |
| |
| jc42: temperature-sensor@19 { |
| compatible = "nxp,se97b", "jedec,jc-42.4-temp"; |
| reg = <0x19>; |
| }; |
| |
| expander_out0: gpio-expander@20 { |
| compatible = "nxp,pca9554"; |
| reg = <0x20>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| vcc-supply = <®_mba6ul_3v3>; |
| }; |
| |
| expander_in0: gpio-expander@21 { |
| compatible = "nxp,pca9554"; |
| reg = <0x21>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_expander_in0>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <23 IRQ_TYPE_LEVEL_LOW>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| vcc-supply = <®_mba6ul_3v3>; |
| |
| enet1_int-hog { |
| gpio-hog; |
| gpios = <6 0>; |
| input; |
| }; |
| |
| enet2_int-hog { |
| gpio-hog; |
| gpios = <7 0>; |
| input; |
| }; |
| }; |
| |
| expander_out1: gpio-expander@22 { |
| compatible = "nxp,pca9554"; |
| reg = <0x22>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| vcc-supply = <®_mba6ul_3v3>; |
| }; |
| |
| analog_touch: touchscreen@41 { |
| compatible = "st,stmpe811"; |
| reg = <0x41>; |
| interrupts = <21 IRQ_TYPE_EDGE_FALLING>; |
| interrupt-parent = <&gpio4>; |
| status = "disabled"; |
| |
| touchscreen { |
| compatible = "st,stmpe-ts"; |
| st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */ |
| st,ave-ctrl = <3>; /* 8 sample average control */ |
| st,fraction-z = <7>; /* 7 length fractional part in z */ |
| /* |
| * 50 mA typical 80 mA max touchscreen drivers |
| * current limit value |
| */ |
| st,i-drive = <1>; |
| st,mod-12b = <1>; /* 12-bit ADC */ |
| st,ref-sel = <0>; /* internal ADC reference */ |
| st,sample-time = <4>; /* ADC converstion time: 80 clocks */ |
| st,settling = <3>; /* 1 ms panel driver settling time */ |
| st,touch-det-delay = <5>; /* 5 ms touch detect interrupt delay */ |
| }; |
| }; |
| |
| /* NXP SE97BTP with temperature sensor + eeprom */ |
| se97b: eeprom@51 { |
| compatible = "nxp,se97b", "atmel,24c02"; |
| reg = <0x51>; |
| pagesize = <16>; |
| vcc-supply = <®_mba6ul_3v3>; |
| }; |
| }; |
| |
| &pwm2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm2>; |
| status = "okay"; |
| }; |
| |
| &sai1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai1>; |
| assigned-clocks = <&clks IMX6UL_CLK_SAI1_SEL>, |
| <&clks IMX6UL_CLK_SAI1>; |
| assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; |
| assigned-clock-rates = <0>, <24000000>; |
| fsl,sai-mclk-direction-output; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3>; |
| status = "okay"; |
| }; |
| |
| &uart6 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart6>; |
| /* for DTE mode, add below change */ |
| /* fsl,dte-mode; */ |
| /* pinctrl-0 = <&pinctrl_uart6dte>; */ |
| uart-has-rtscts; |
| linux,rs485-enabled-at-boot-time; |
| rs485-rts-active-low; |
| rs485-rx-during-tx; |
| status = "okay"; |
| }; |
| |
| /* otg-port */ |
| &usbotg1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb_otg1>; |
| power-active-high; |
| over-current-active-low; |
| /* we implement only dual role but not a fully featured OTG */ |
| hnp-disable; |
| srp-disable; |
| adp-disable; |
| dr_mode = "otg"; |
| status = "okay"; |
| }; |
| |
| /* 7-port usb hub */ |
| /* id, pwr, oc pins not connected */ |
| &usbotg2 { |
| disable-over-current; |
| vbus-supply = <®_otg2vbus_5v0>; |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usdhc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; |
| bus-width = <4>; |
| vmmc-supply = <®_mba6ul_3v3>; |
| vqmmc-supply = <®_vccsd>; |
| no-1-8-v; |
| no-mmc; |
| no-sdio; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog1>; |
| fsl,ext-reset-output; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl_buttons: buttonsgrp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x100b0 |
| >; |
| }; |
| |
| pinctrl_ecspi2: ecspi2grp { |
| fsl,pins = < |
| MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x1b020 |
| MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x1b020 |
| MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x1b020 |
| MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x1b020 |
| >; |
| }; |
| |
| pinctrl_enet1: enet1grp { |
| fsl,pins = < |
| MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 |
| MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 |
| MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 |
| MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 |
| MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 |
| MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 |
| MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 |
| MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b0a8 |
| >; |
| }; |
| |
| pinctrl_enet2: enet2grp { |
| fsl,pins = < |
| MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 |
| MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 |
| MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 |
| MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 |
| MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0a0 |
| MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0a0 |
| MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 |
| MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b0a8 |
| >; |
| }; |
| |
| pinctrl_enet2_mdc: enet2mdcgrp { |
| fsl,pins = < |
| /* mdio */ |
| MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 |
| MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_expander_in0: expanderin0grp { |
| fsl,pins = < |
| MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_flexcan1: flexcan1grp { |
| fsl,pins = < |
| MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 |
| MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 |
| >; |
| }; |
| |
| pinctrl_flexcan2: flexcan2grp { |
| fsl,pins = < |
| MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 |
| MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 |
| >; |
| }; |
| |
| pinctrl_pwm2: pwm2grp { |
| fsl,pins = < |
| /* 100 k PD, DSE 120 OHM, SPEED LO */ |
| MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x00003050 |
| >; |
| }; |
| |
| pinctrl_sai1: sai1grp { |
| fsl,pins = < |
| MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x1b0b1 |
| MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x1b0b1 |
| MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x1f0b8 |
| MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x110b0 |
| MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 |
| MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart3: uart3grp { |
| fsl,pins = < |
| MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 |
| MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart6: uart6grp { |
| fsl,pins = < |
| MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1 |
| MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1 |
| MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS 0x1b0b1 |
| MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart6dte: uart6dte { |
| fsl,pins = < |
| MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX 0x1b0b1 |
| MX6UL_PAD_CSI_MCLK__UART6_DTE_RX 0x1b0b1 |
| MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS 0x1b0b1 |
| MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usb_otg1: usbotg1grp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x00017059 |
| MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x0001b0b0 |
| MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR 0x0001b099 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 |
| MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x00017059 |
| MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x00017059 |
| MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x00017059 |
| MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x00017059 |
| MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x00017059 |
| /* WP */ |
| MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 |
| /* CD */ |
| MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 |
| >; |
| }; |
| |
| pinctrl_usdhc1_100mhz: usdhc1grp100mhz { |
| fsl,pins = < |
| MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 |
| MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170b9 |
| MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170b9 |
| MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170b9 |
| MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170b9 |
| MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170b9 |
| /* WP */ |
| MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 |
| /* CD */ |
| MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 |
| >; |
| }; |
| |
| pinctrl_usdhc1_200mhz: usdhc1grp200mhz { |
| fsl,pins = < |
| MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 |
| MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170f9 |
| MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170f9 |
| MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170f9 |
| MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170f9 |
| MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170f9 |
| /* WP */ |
| MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 |
| /* CD */ |
| MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 |
| >; |
| }; |
| |
| pinctrl_wdog1: wdog1grp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0001b099 |
| >; |
| }; |
| }; |