| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2016 Freescale Semiconductor, Inc. |
| * Copyright 2017-2018 NXP |
| * Dong Aisheng <aisheng.dong@nxp.com> |
| */ |
| |
| #include <dt-bindings/clock/imx7ulp-clock.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| #include "imx7ulp-pinfunc.h" |
| |
| / { |
| interrupt-parent = <&intc>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| gpio0 = &gpio_ptc; |
| gpio1 = &gpio_ptd; |
| gpio2 = &gpio_pte; |
| gpio3 = &gpio_ptf; |
| i2c0 = &lpi2c6; |
| i2c1 = &lpi2c7; |
| mmc0 = &usdhc0; |
| mmc1 = &usdhc1; |
| serial0 = &lpuart4; |
| serial1 = &lpuart5; |
| serial2 = &lpuart6; |
| serial3 = &lpuart7; |
| usbphy0 = &usbphy1; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@f00 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <0xf00>; |
| }; |
| }; |
| |
| intc: interrupt-controller@40021000 { |
| compatible = "arm,cortex-a7-gic"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x40021000 0x1000>, |
| <0x40022000 0x1000>; |
| }; |
| |
| rosc: clock-rosc { |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| clock-output-names = "rosc"; |
| #clock-cells = <0>; |
| }; |
| |
| sosc: clock-sosc { |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-output-names = "sosc"; |
| #clock-cells = <0>; |
| }; |
| |
| sirc: clock-sirc { |
| compatible = "fixed-clock"; |
| clock-frequency = <16000000>; |
| clock-output-names = "sirc"; |
| #clock-cells = <0>; |
| }; |
| |
| firc: clock-firc { |
| compatible = "fixed-clock"; |
| clock-frequency = <48000000>; |
| clock-output-names = "firc"; |
| #clock-cells = <0>; |
| }; |
| |
| upll: clock-upll { |
| compatible = "fixed-clock"; |
| clock-frequency = <480000000>; |
| clock-output-names = "upll"; |
| #clock-cells = <0>; |
| }; |
| |
| ahbbridge0: bus@40000000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x40000000 0x800000>; |
| ranges; |
| |
| edma1: dma-controller@40080000 { |
| #dma-cells = <2>; |
| compatible = "fsl,imx7ulp-edma"; |
| reg = <0x40080000 0x2000>, |
| <0x40210000 0x1000>; |
| dma-channels = <32>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "dma", "dmamux0"; |
| clocks = <&pcc2 IMX7ULP_CLK_DMA1>, |
| <&pcc2 IMX7ULP_CLK_DMA_MUX1>; |
| }; |
| |
| crypto: crypto@40240000 { |
| compatible = "fsl,sec-v4.0"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x40240000 0x10000>; |
| ranges = <0 0x40240000 0x10000>; |
| clocks = <&pcc2 IMX7ULP_CLK_CAAM>, |
| <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>; |
| clock-names = "aclk", "ipg"; |
| |
| sec_jr0: jr@1000 { |
| compatible = "fsl,sec-v4.0-job-ring"; |
| reg = <0x1000 0x1000>; |
| interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| sec_jr1: jr@2000 { |
| compatible = "fsl,sec-v4.0-job-ring"; |
| reg = <0x2000 0x1000>; |
| interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| lpuart4: serial@402d0000 { |
| compatible = "fsl,imx7ulp-lpuart"; |
| reg = <0x402d0000 0x1000>; |
| interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pcc2 IMX7ULP_CLK_LPUART4>; |
| clock-names = "ipg"; |
| assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART4>; |
| assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; |
| assigned-clock-rates = <24000000>; |
| status = "disabled"; |
| }; |
| |
| lpuart5: serial@402e0000 { |
| compatible = "fsl,imx7ulp-lpuart"; |
| reg = <0x402e0000 0x1000>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pcc2 IMX7ULP_CLK_LPUART5>; |
| clock-names = "ipg"; |
| assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART5>; |
| assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; |
| assigned-clock-rates = <48000000>; |
| status = "disabled"; |
| }; |
| |
| tpm4: pwm@40250000 { |
| compatible = "fsl,imx7ulp-pwm"; |
| reg = <0x40250000 0x1000>; |
| assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>; |
| assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; |
| clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| tpm5: tpm@40260000 { |
| compatible = "fsl,imx7ulp-tpm"; |
| reg = <0x40260000 0x1000>; |
| interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, |
| <&pcc2 IMX7ULP_CLK_LPTPM5>; |
| clock-names = "ipg", "per"; |
| }; |
| |
| usbotg1: usb@40330000 { |
| compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", "fsl,imx27-usb"; |
| reg = <0x40330000 0x200>; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pcc2 IMX7ULP_CLK_USB0>; |
| phys = <&usbphy1>; |
| fsl,usbmisc = <&usbmisc1 0>; |
| ahb-burst-config = <0x0>; |
| tx-burst-size-dword = <0x8>; |
| rx-burst-size-dword = <0x8>; |
| status = "disabled"; |
| }; |
| |
| usbmisc1: usbmisc@40330200 { |
| compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", |
| "fsl,imx6q-usbmisc"; |
| #index-cells = <1>; |
| reg = <0x40330200 0x200>; |
| }; |
| |
| usbphy1: usb-phy@40350000 { |
| compatible = "fsl,imx7ulp-usbphy"; |
| reg = <0x40350000 0x1000>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>; |
| #phy-cells = <0>; |
| }; |
| |
| usdhc0: mmc@40370000 { |
| compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; |
| reg = <0x40370000 0x10000>; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, |
| <&scg1 IMX7ULP_CLK_NIC1_DIV>, |
| <&pcc2 IMX7ULP_CLK_USDHC0>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| fsl,tuning-start-tap = <20>; |
| fsl,tuning-step = <2>; |
| status = "disabled"; |
| }; |
| |
| usdhc1: mmc@40380000 { |
| compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; |
| reg = <0x40380000 0x10000>; |
| interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, |
| <&scg1 IMX7ULP_CLK_NIC1_DIV>, |
| <&pcc2 IMX7ULP_CLK_USDHC1>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| fsl,tuning-start-tap = <20>; |
| fsl,tuning-step = <2>; |
| status = "disabled"; |
| }; |
| |
| scg1: clock-controller@403e0000 { |
| compatible = "fsl,imx7ulp-scg1"; |
| reg = <0x403e0000 0x10000>; |
| clocks = <&rosc>, <&sosc>, <&sirc>, |
| <&firc>, <&upll>; |
| clock-names = "rosc", "sosc", "sirc", |
| "firc", "upll"; |
| #clock-cells = <1>; |
| }; |
| |
| wdog1: watchdog@403d0000 { |
| compatible = "fsl,imx7ulp-wdt"; |
| reg = <0x403d0000 0x10000>; |
| interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pcc2 IMX7ULP_CLK_WDG1>; |
| assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>; |
| assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>; |
| timeout-sec = <40>; |
| }; |
| |
| pcc2: clock-controller@403f0000 { |
| compatible = "fsl,imx7ulp-pcc2"; |
| reg = <0x403f0000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, |
| <&scg1 IMX7ULP_CLK_NIC1_DIV>, |
| <&scg1 IMX7ULP_CLK_DDR_DIV>, |
| <&scg1 IMX7ULP_CLK_APLL_PFD2>, |
| <&scg1 IMX7ULP_CLK_APLL_PFD1>, |
| <&scg1 IMX7ULP_CLK_APLL_PFD0>, |
| <&scg1 IMX7ULP_CLK_UPLL>, |
| <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, |
| <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, |
| <&scg1 IMX7ULP_CLK_ROSC>, |
| <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; |
| clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", |
| "apll_pfd2", "apll_pfd1", "apll_pfd0", |
| "upll", "sosc_bus_clk", |
| "firc_bus_clk", "rosc", "spll_bus_clk"; |
| assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM5>; |
| assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; |
| }; |
| |
| smc1: clock-controller@40410000 { |
| compatible = "fsl,imx7ulp-smc1"; |
| reg = <0x40410000 0x1000>; |
| #clock-cells = <1>; |
| clocks = <&scg1 IMX7ULP_CLK_CORE_DIV>, |
| <&scg1 IMX7ULP_CLK_HSRUN_CORE_DIV>; |
| clock-names = "divcore", "hsrun_divcore"; |
| }; |
| |
| pcc3: clock-controller@40b30000 { |
| compatible = "fsl,imx7ulp-pcc3"; |
| reg = <0x40b30000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, |
| <&scg1 IMX7ULP_CLK_NIC1_DIV>, |
| <&scg1 IMX7ULP_CLK_DDR_DIV>, |
| <&scg1 IMX7ULP_CLK_APLL_PFD2>, |
| <&scg1 IMX7ULP_CLK_APLL_PFD1>, |
| <&scg1 IMX7ULP_CLK_APLL_PFD0>, |
| <&scg1 IMX7ULP_CLK_UPLL>, |
| <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, |
| <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, |
| <&scg1 IMX7ULP_CLK_ROSC>, |
| <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; |
| clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", |
| "apll_pfd2", "apll_pfd1", "apll_pfd0", |
| "upll", "sosc_bus_clk", |
| "firc_bus_clk", "rosc", "spll_bus_clk"; |
| }; |
| }; |
| |
| ahbbridge1: bus@40800000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x40800000 0x800000>; |
| ranges; |
| |
| lpi2c6: i2c@40a40000 { |
| compatible = "fsl,imx7ulp-lpi2c"; |
| reg = <0x40a40000 0x10000>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>, |
| <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>; |
| clock-names = "per", "ipg"; |
| assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>; |
| assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; |
| assigned-clock-rates = <48000000>; |
| status = "disabled"; |
| }; |
| |
| lpi2c7: i2c@40a50000 { |
| compatible = "fsl,imx7ulp-lpi2c"; |
| reg = <0x40a50000 0x10000>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>, |
| <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>; |
| clock-names = "per", "ipg"; |
| assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>; |
| assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; |
| assigned-clock-rates = <48000000>; |
| status = "disabled"; |
| }; |
| |
| lpuart6: serial@40a60000 { |
| compatible = "fsl,imx7ulp-lpuart"; |
| reg = <0x40a60000 0x1000>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pcc3 IMX7ULP_CLK_LPUART6>; |
| clock-names = "ipg"; |
| assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART6>; |
| assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; |
| assigned-clock-rates = <48000000>; |
| status = "disabled"; |
| }; |
| |
| lpuart7: serial@40a70000 { |
| compatible = "fsl,imx7ulp-lpuart"; |
| reg = <0x40a70000 0x1000>; |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pcc3 IMX7ULP_CLK_LPUART7>; |
| clock-names = "ipg"; |
| assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART7>; |
| assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; |
| assigned-clock-rates = <48000000>; |
| status = "disabled"; |
| }; |
| |
| memory-controller@40ab0000 { |
| compatible = "fsl,imx7ulp-mmdc", "fsl,imx6q-mmdc"; |
| reg = <0x40ab0000 0x1000>; |
| clocks = <&pcc3 IMX7ULP_CLK_MMDC>; |
| }; |
| |
| iomuxc1: pinctrl@40ac0000 { |
| compatible = "fsl,imx7ulp-iomuxc1"; |
| reg = <0x40ac0000 0x1000>; |
| }; |
| |
| gpio_ptc: gpio@40ae0000 { |
| compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; |
| reg = <0x40ae0000 0x1000 0x400f0000 0x40>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, |
| <&pcc3 IMX7ULP_CLK_PCTLC>; |
| clock-names = "gpio", "port"; |
| gpio-ranges = <&iomuxc1 0 0 20>; |
| }; |
| |
| gpio_ptd: gpio@40af0000 { |
| compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; |
| reg = <0x40af0000 0x1000 0x400f0040 0x40>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, |
| <&pcc3 IMX7ULP_CLK_PCTLD>; |
| clock-names = "gpio", "port"; |
| gpio-ranges = <&iomuxc1 0 32 12>; |
| }; |
| |
| gpio_pte: gpio@40b00000 { |
| compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; |
| reg = <0x40b00000 0x1000 0x400f0080 0x40>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, |
| <&pcc3 IMX7ULP_CLK_PCTLE>; |
| clock-names = "gpio", "port"; |
| gpio-ranges = <&iomuxc1 0 64 16>; |
| }; |
| |
| gpio_ptf: gpio@40b10000 { |
| compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; |
| reg = <0x40b10000 0x1000 0x400f00c0 0x40>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, |
| <&pcc3 IMX7ULP_CLK_PCTLF>; |
| clock-names = "gpio", "port"; |
| gpio-ranges = <&iomuxc1 0 96 20>; |
| }; |
| }; |
| |
| m4aips1: bus@41080000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x41080000 0x80000>; |
| ranges; |
| |
| sim: sim@410a3000 { |
| compatible = "fsl,imx7ulp-sim", "syscon"; |
| reg = <0x410a3000 0x1000>; |
| }; |
| |
| ocotp: efuse@410a6000 { |
| compatible = "fsl,imx7ulp-ocotp", "syscon"; |
| reg = <0x410a6000 0x4000>; |
| clocks = <&scg1 IMX7ULP_CLK_DUMMY>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| }; |
| }; |
| }; |