src/arm/nxp/imx/imx6q-marsboard.dts - filogic/uboot - Gitiles

 /*
  * Copyright (C) 2016 Sergio Prado (sergio.prado@e-labworks.com)
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License
  *     version 2 as published by the Free Software Foundation.
  *
  *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
  *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
  *     conditions:
  *
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */

 /dts-v1/;
 #include "imx6q.dtsi"
 #include <dt-bindings/gpio/gpio.h>

 / {
 	model = "Embest MarS Board i.MX6Dual";
 	compatible = "embest,imx6q-marsboard", "fsl,imx6q";

 	memory@10000000 {
 		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
 	};

 	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "3P3V";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};

 	reg_usb_otg_vbus: regulator-usb-otg-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_otg_vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};

 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;

 		led-user1 {
 			label = "imx6:green:user1";
 			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "heartbeat";
 		};

 		led-user2 {
 			label = "imx6:green:user2";
 			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 	};
 };

 &audmux {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 };

 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
 	status = "okay";

 	flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
 };

 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&rgmii_phy>;
 	status = "okay";

 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;

 		/* Atheros AR8035 PHY */
 		rgmii_phy: ethernet-phy@4 {
 			reg = <4>;
 			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
 			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <1000>;
 		};
 	};
 };

 &hdmi {
 	ddc-i2c-bus = <&i2c2>;
 	status = "okay";
 };

 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 };

 &i2c2 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 };

 &i2c3 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 };

 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };

 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
 };

 &pwm3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
 };

 &pwm4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
 };

 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };

 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 };

 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 };

 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
 	status = "okay";
 };

 &uart5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5>;
 	status = "okay";
 };

 &usbh1 {
 	dr_mode = "host";
 	disable-over-current;
 	status = "okay";
 };

 &usbotg {
 	vbus-supply = <&reg_usb_otg_vbus>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg>;
 	dr_mode = "otg";
 	disable-over-current;
 	status = "okay";
 };

 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	vmmc-supply = <&reg_3p3v>;
 	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };

 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	vmmc-supply = <&reg_3p3v>;
 	non-removable;
 	status = "okay";
 };

 &iomuxc {

 	pinctrl_audmux: audmuxgrp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
 			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
 			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
 			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
 			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0	/* CAM_MCLK */
 		>;
 	};

 	pinctrl_ecspi1: ecspi1grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
 			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
 			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
 			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x000b1	/* CS0 */
 		>;
 	};

 	pinctrl_enet: enetgrp {
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
 			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
 			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
 			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
 			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
 			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
 			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 			/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
 			/* AR8035 pin strapping: IO voltage: pull up */
 			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
 			/* AR8035 pin strapping: PHYADDR#0: pull down */
 			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
 			/* AR8035 pin strapping: PHYADDR#1: pull down */
 			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
 			/* AR8035 pin strapping: MODE#1: pull up */
 			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
 			/* AR8035 pin strapping: MODE#3: pull up */
 			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
 			/* AR8035 pin strapping: MODE#0: pull down */
 			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
 			/* GPIO16 -> AR8035 25MHz */
 			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			/* RGMII_nRST */
 			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0
 			/* AR8035 interrupt */
 			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0
 		>;
 	};

 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
 			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
 		>;
 	};

 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
 			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
 		>;
 	};

 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
 			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
 		>;
 	};

 	pinctrl_led: ledgrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* LED1 */
 			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* LED2 */
 		>;
 	};

 	pinctrl_pwm1: pwm1grp {
 		fsl,pins = <
 			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
 		>;
 	};

 	pinctrl_pwm2: pwm2grp {
 		fsl,pins = <
 			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
 		>;
 	};

 	pinctrl_pwm3: pwm3grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
 		>;
 	};

 	pinctrl_pwm4: pwm4grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
 		>;
 	};

 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
 			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
 		>;
 	};

 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
 			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
 		>;
 	};

 	pinctrl_uart3: uart3grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
 			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
 		>;
 	};

 	pinctrl_uart4: uart4grp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
 			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
 		>;
 	};

 	pinctrl_uart5: uart5grp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
 			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
 		>;
 	};

 	pinctrl_usbotg: usbotggrp {
 		fsl,pins = <
 			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
 			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
 			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* USB OTG POWER ENABLE */
 		>;
 	};

 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
 			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
 			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
 			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
 			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
 			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
 			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
 			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* WP */
 		>;
 	};

 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17009
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10009
 			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17009
 			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17009
 			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17009
 			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17009
 			MX6QDL_PAD_SD3_RST__SD3_RESET		0x17009
 		>;
 	};
 };
	/*
	* Copyright (C) 2016 Sergio Prado (sergio.prado@e-labworks.com)
	*
	* This file is dual-licensed: you can use it either under the terms
	* of the GPL or the X11 license, at your option. Note that this dual
	* licensing only applies to this file, and not this project as a
	* whole.
	*
	* a) This file is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* version 2 as published by the Free Software Foundation.
	*
	* This file is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* Or, alternatively,
	*
	* b) Permission is hereby granted, free of charge, to any person
	* obtaining a copy of this software and associated documentation
	* files (the "Software"), to deal in the Software without
	* restriction, including without limitation the rights to use,
	* copy, modify, merge, publish, distribute, sublicense, and/or
	* sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following
	* conditions:
	*
	* The above copyright notice and this permission notice shall be
	* included in all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*/

	/dts-v1/;
	#include "imx6q.dtsi"
	#include <dt-bindings/gpio/gpio.h>

	/ {
	model = "Embest MarS Board i.MX6Dual";
	compatible = "embest,imx6q-marsboard", "fsl,imx6q";

	memory@10000000 {
	device_type = "memory";
	reg = <0x10000000 0x40000000>;
	};

	reg_3p3v: regulator-3p3v {
	compatible = "regulator-fixed";
	regulator-name = "3P3V";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	};

	reg_usb_otg_vbus: regulator-usb-otg-vbus {
	compatible = "regulator-fixed";
	regulator-name = "usb_otg_vbus";
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
	enable-active-high;
	};

	leds {
	compatible = "gpio-leds";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_led>;

	led-user1 {
	label = "imx6:green:user1";
	gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
	default-state = "off";
	linux,default-trigger = "heartbeat";
	};

	led-user2 {
	label = "imx6:green:user2";
	gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
	default-state = "off";
	};
	};
	};

	&audmux {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_audmux>;
	status = "okay";
	};

	&ecspi1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi1>;
	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
	status = "okay";

	flash@0 {
	compatible = "microchip,sst25vf016b";
	spi-max-frequency = <20000000>;
	reg = <0>;
	};
	};

	&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet>;
	phy-mode = "rgmii-id";
	phy-handle = <&rgmii_phy>;
	status = "okay";

	mdio {
	#address-cells = <1>;
	#size-cells = <0>;

	/* Atheros AR8035 PHY */
	rgmii_phy: ethernet-phy@4 {
	reg = <4>;
	interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
	reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
	reset-assert-us = <10000>;
	reset-deassert-us = <1000>;
	};
	};
	};

	&hdmi {
	ddc-i2c-bus = <&i2c2>;
	status = "okay";
	};

	&i2c1 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	status = "okay";
	};

	&i2c2 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";
	};

	&i2c3 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c3>;
	status = "okay";
	};

	&pwm1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm1>;
	status = "okay";
	};

	&pwm2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm2>;
	status = "okay";
	};

	&pwm3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm3>;
	status = "okay";
	};

	&pwm4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm4>;
	status = "okay";
	};

	&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	status = "okay";
	};

	&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	status = "okay";
	};

	&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3>;
	status = "okay";
	};

	&uart4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart4>;
	status = "okay";
	};

	&uart5 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart5>;
	status = "okay";
	};

	&usbh1 {
	dr_mode = "host";
	disable-over-current;
	status = "okay";
	};

	&usbotg {
	vbus-supply = <&reg_usb_otg_vbus>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg>;
	dr_mode = "otg";
	disable-over-current;
	status = "okay";
	};

	&usdhc2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc2>;
	vmmc-supply = <&reg_3p3v>;
	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
	status = "okay";
	};

	&usdhc3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc3>;
	vmmc-supply = <&reg_3p3v>;
	non-removable;
	status = "okay";
	};

	&iomuxc {

	pinctrl_audmux: audmuxgrp {
	fsl,pins = <
	MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
	MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
	MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
	MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
	MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM_MCLK */
	>;
	};

	pinctrl_ecspi1: ecspi1grp {
	fsl,pins = <
	MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
	MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
	MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
	MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x000b1 /* CS0 */
	>;
	};

	pinctrl_enet: enetgrp {
	fsl,pins = <
	MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
	MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
	MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
	MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
	MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
	MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
	MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
	MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
	/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
	MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1
	/* AR8035 pin strapping: IO voltage: pull up */
	MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
	/* AR8035 pin strapping: PHYADDR#0: pull down */
	MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030
	/* AR8035 pin strapping: PHYADDR#1: pull down */
	MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030
	/* AR8035 pin strapping: MODE#1: pull up */
	MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
	/* AR8035 pin strapping: MODE#3: pull up */
	MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
	/* AR8035 pin strapping: MODE#0: pull down */
	MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030
	/* GPIO16 -> AR8035 25MHz */
	MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
	/* RGMII_nRST */
	MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0
	/* AR8035 interrupt */
	MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x180b0
	>;
	};

	pinctrl_i2c1: i2c1grp {
	fsl,pins = <
	MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
	MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
	>;
	};

	pinctrl_i2c2: i2c2grp {
	fsl,pins = <
	MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
	MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
	>;
	};

	pinctrl_i2c3: i2c3grp {
	fsl,pins = <
	MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
	MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
	>;
	};

	pinctrl_led: ledgrp {
	fsl,pins = <
	MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* LED1 */
	MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b1 /* LED2 */
	>;
	};

	pinctrl_pwm1: pwm1grp {
	fsl,pins = <
	MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
	>;
	};

	pinctrl_pwm2: pwm2grp {
	fsl,pins = <
	MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1
	>;
	};

	pinctrl_pwm3: pwm3grp {
	fsl,pins = <
	MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
	>;
	};

	pinctrl_pwm4: pwm4grp {
	fsl,pins = <
	MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
	>;
	};

	pinctrl_uart1: uart1grp {
	fsl,pins = <
	MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
	MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
	>;
	};

	pinctrl_uart2: uart2grp {
	fsl,pins = <
	MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
	MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
	>;
	};

	pinctrl_uart3: uart3grp {
	fsl,pins = <
	MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
	MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
	>;
	};

	pinctrl_uart4: uart4grp {
	fsl,pins = <
	MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
	MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
	>;
	};

	pinctrl_uart5: uart5grp {
	fsl,pins = <
	MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
	MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
	>;
	};

	pinctrl_usbotg: usbotggrp {
	fsl,pins = <
	MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
	MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
	MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 /* USB OTG POWER ENABLE */
	>;
	};

	pinctrl_usdhc2: usdhc2grp {
	fsl,pins = <
	MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
	MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
	MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
	MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
	MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
	MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
	MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */
	MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1f0b0 /* WP */
	>;
	};

	pinctrl_usdhc3: usdhc3grp {
	fsl,pins = <
	MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17009
	MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10009
	MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17009
	MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17009
	MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17009
	MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17009
	MX6QDL_PAD_SD3_RST__SD3_RESET 0x17009
	>;
	};
	};