| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| /* |
| * Copyright 2014-2022 Toradex |
| * Copyright 2012 Freescale Semiconductor, Inc. |
| * Copyright 2011 Linaro Ltd. |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include "imx6q.dtsi" |
| #include "imx6qdl-apalis.dtsi" |
| |
| / { |
| model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board"; |
| compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q", |
| "fsl,imx6q"; |
| |
| aliases { |
| i2c0 = &i2c1; |
| i2c1 = &i2c3; |
| i2c2 = &i2c2; |
| rtc0 = &rtc_i2c; |
| rtc1 = &snvs_rtc; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_leds_ixora>; |
| |
| led4-green { |
| gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; |
| label = "LED_4_GREEN"; |
| }; |
| |
| led4-red { |
| gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; |
| label = "LED_4_RED"; |
| }; |
| |
| led5-green { |
| gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; |
| label = "LED_5_GREEN"; |
| }; |
| |
| led5-red { |
| gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; |
| label = "LED_5_RED"; |
| }; |
| }; |
| }; |
| |
| &can1 { |
| status = "okay"; |
| }; |
| |
| &can2 { |
| status = "okay"; |
| }; |
| |
| /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ |
| &i2c1 { |
| status = "okay"; |
| |
| eeprom@50 { |
| compatible = "atmel,24c02"; |
| reg = <0x50>; |
| }; |
| |
| /* M41T0M6 real time clock on carrier board */ |
| rtc_i2c: rtc@68 { |
| compatible = "st,m41t0"; |
| reg = <0x68>; |
| }; |
| }; |
| |
| /* |
| * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier |
| * board) |
| */ |
| &i2c3 { |
| status = "okay"; |
| }; |
| |
| &pcie { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reset_moci>; |
| /* active-high meaning opposite of regular PERST# active-low polarity */ |
| reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; |
| reset-gpio-active-high; |
| status = "okay"; |
| }; |
| |
| &pwm1 { |
| status = "okay"; |
| }; |
| |
| &pwm2 { |
| status = "okay"; |
| }; |
| |
| &pwm3 { |
| status = "okay"; |
| }; |
| |
| &pwm4 { |
| status = "okay"; |
| }; |
| |
| ®_usb_host_vbus { |
| status = "okay"; |
| }; |
| |
| ®_usb_otg_vbus { |
| status = "okay"; |
| }; |
| |
| &sata { |
| status = "okay"; |
| }; |
| |
| &sound_spdif { |
| status = "okay"; |
| }; |
| |
| &spdif { |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| status = "okay"; |
| }; |
| |
| &uart4 { |
| status = "okay"; |
| }; |
| |
| &uart5 { |
| status = "okay"; |
| }; |
| |
| &usbh1 { |
| disable-over-current; |
| vbus-supply = <®_usb_host_vbus>; |
| status = "okay"; |
| }; |
| |
| &usbotg { |
| disable-over-current; |
| vbus-supply = <®_usb_otg_vbus>; |
| status = "okay"; |
| }; |
| |
| /* SD1 */ |
| &usdhc2 { |
| cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl_leds_ixora: ledsixoragrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 |
| MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0 |
| MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 |
| MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 |
| >; |
| }; |
| }; |