src/arm/nxp/imx/imx6dl-victgo.dts - filogic/uboot - Gitiles

 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (c) 2016 Protonic Holland
  * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
  */

 /dts-v1/;
 #include "imx6dl.dtsi"
 #include "imx6qdl-vicut1.dtsi"

 / {
 	model = "Kverneland TGO";
 	compatible = "kvg,victgo", "fsl,imx6dl";

 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 		autorepeat;

 		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};

 		key-enter {
 			label = "Rotary Key";
 			gpios = <&gpio2 05 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_ENTER>;
 			wakeup-source;
 		};
 	};

 	iio-hwmon {
 		compatible = "iio-hwmon";
 		io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>;
 	};

 	panel {
 		compatible = "lg,lb070wv8";
 		backlight = <&backlight_lcd>;
 		power-supply = <&reg_3v3>;

 		port {
 			panel_in: endpoint {
 				remote-endpoint = <&lvds0_out>;
 			};
 		};
 	};

 	clk50m_phy: phy-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 		clock-output-names = "enet_ref_pad";
 	};

 	rotary-encoder {
 		compatible = "rotary-encoder";
 		pinctrl-0 = <&pinctrl_rotary_ch>;
 		gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>,
 			<&gpio2 4 GPIO_ACTIVE_HIGH>;
 		linux,axis = <REL_WHEEL>;
 		rotary-encoder,steps-per-period = <4>;
 		rotary-encoder,relative-axis;
 		rotary-encoder,rollover;
 		wakeup-source;
 	};

 	thermal-zones {
 		chassis-thermal {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&tsens0>;

 			trips {
 				alert {
 					temperature = <105000>; /* millicelsius */
 					hysteresis = <2000>; /* millicelsius */
 					type = "passive";
 				};
 			};
 		};

 		touch-thermal0 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp0>;

 			trips {
 				alert {
 					temperature = <105000>; /* millicelsius */
 					hysteresis = <2000>; /* millicelsius */
 					type = "passive";
 				};
 			};
 		};

 		touch-thermal1 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp1>;

 			trips {
 				alert {
 					temperature = <105000>; /* millicelsius */
 					hysteresis = <2000>; /* millicelsius */
 					type = "passive";
 				};
 			};
 		};
 	};

 	touchscreen {
 		compatible = "resistive-adc-touch";
 		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
                               <&adc_ts 5>;
 		io-channel-names = "y", "z1", "z2", "x";
 		touchscreen-min-pressure = <64687>;
 		touchscreen-inverted-y;
 		touchscreen-x-plate-ohms = <300>;
 		touchscreen-y-plate-ohms = <800>;
 	};

 	touch_temp0: touch-temperature-sensor0 {
 		compatible = "generic-adc-thermal";
 		#thermal-sensor-cells = <0>;
 		io-channels = <&adc_ts 0>;
 		io-channel-names = "sensor-channel";
 		temperature-lookup-table = <    (-40000) 736
 						85000 474>;
 	};

 	touch_temp1: touch-temperature-sensor1 {
 		compatible = "generic-adc-thermal";
 		#thermal-sensor-cells = <0>;
 		io-channels = <&adc_ts 7>;
 		io-channel-names = "sensor-channel";
 		temperature-lookup-table = <    (-40000) 826
 						85000 609>;
 	};

 	vdiv_vaccu: voltage-divider-vaccu {
 		compatible = "voltage-divider";
 		io-channels = <&adc_ts 2>;
 		output-ohms = <2500>;
 		full-ohms = <64000>;
 		#io-channel-cells = <0>;
 	};

 	vdiv_hitch_pos: voltage-divider-hitch-pos {
 		compatible = "voltage-divider";
 		io-channels = <&adc_ts 6>;
 		output-ohms = <3300>;
 		full-ohms = <13300>;
 		#io-channel-cells = <0>;
 	};
 };

 &clks {
 	clocks = <&clk50m_phy>;
 	clock-names = "enet_ref_pad";
 	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
 	assigned-clock-parents = <&clk50m_phy>;
 };

 &ecspi2 {
 	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";

 	adc_ts: adc@0 {
 		compatible = "ti,tsc2046e-adc";
 		reg = <0>;
 		pinctrl-0 = <&pinctrl_touchscreen>;
 		pinctrl-names = "default";
 		spi-max-frequency = <1000000>;
 		interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
 		#io-channel-cells = <1>;

 		#address-cells = <1>;
 		#size-cells = <0>;

 		channel@1 {
 			reg = <1>;
 			settling-time-us = <700>;
 			oversampling-ratio = <5>;
 		};

 		channel@3 {
 			reg = <3>;
 			settling-time-us = <700>;
 			oversampling-ratio = <5>;
 		};

 		channel@4 {
 			reg = <4>;
 			settling-time-us = <700>;
 			oversampling-ratio = <5>;
 		};

 		channel@5 {
 			reg = <5>;
 			settling-time-us = <700>;
 			oversampling-ratio = <5>;
 		};
 	};
 };

 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
 	phy-handle = <&rmii_phy>;
 	status = "okay";

 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;

 		/* Microchip KSZ8081RNA PHY */
 		rmii_phy: ethernet-phy@0 {
 			reg = <0>;
 			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
 			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <300>;
 		};
 	};
 };

 &gpio1 {
 	gpio-line-names =
 		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
 			"CAM2_MIRROR", "", "", "SMBALERT",
 		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
 		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
 			"SD1_DATA3", "ETH_MDIO", "",
 		"", "", "", "", "", "", "", "ETH_MDC";
 };

 &gpio4 {
 	gpio-line-names =
 		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
 		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
 			"CAN2_SR", "CAN2_TX", "CAN2_RX",
 		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
 			"HITCH_IN_OUT",
 		"LIGHT_ON", "", "ETH_RESET", "CONTACT_IN", "BL_EN",
 			"BL_PWM", "ETH_INT", "ISB_LED";
 };

 &gpio5 {
 	gpio-line-names =
 		"", "", "", "", "", "", "", "",
 		"TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO",
 			"ECSPI2_SS0", "ECSPI2_SCLK", "", "",
 		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
 			"I2S_BITCLK", "I2S_DOUT",
 		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
 			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
 };

 &gpio6 {
 	gpio-line-names =
 		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
 			"ITU656_D6", "ITU656_D7", "", "",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "";
 };

 &i2c1 {
 	keypad@70 {
 		compatible = "holtek,ht16k33";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_keypad>;
 		reg = <0x70>;
 		refresh-rate-hz = <20>;
 		debounce-delay-ms = <50>;
 		interrupts-extended = <&gpio4 5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
 		keypad,num-rows = <12>;
 		keypad,num-columns = <3>;
 		linux,keymap = <
 			MATRIX_KEY(2, 0, KEY_F6)
 			MATRIX_KEY(3, 0, KEY_F8)
 			MATRIX_KEY(4, 0, KEY_F10)
 			MATRIX_KEY(5, 0, KEY_F4)
 			MATRIX_KEY(6, 0, KEY_F2)
 			MATRIX_KEY(2, 1, KEY_F5)
 			MATRIX_KEY(3, 1, KEY_F7)
 			MATRIX_KEY(4, 1, KEY_F9)
 			MATRIX_KEY(5, 1, KEY_F3)
 			MATRIX_KEY(6, 1, KEY_F1)
 		      >;
 	};
 };

 &iomuxc {
 	pinctrl_ecspi2: ecspi2grp {
 		fsl,pins = <
 			MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI		0x100b1
 			MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO		0x100b1
 			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12		0x100b1
 			MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK		0x100b1
 		>;
 	};

 	pinctrl_enet: enetgrp {
 		fsl,pins = <
 			/* MX6QDL_ENET_PINGRP4 */
 			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
 			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
 			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
 			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
 			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
 			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
 			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
 			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
 			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
 			/* Phy reset */
 			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0
 			/* nINTRP */
 			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0
 		>;
 	};

 	pinctrl_gpiokeys: gpiokeygrp {
 		fsl,pins = <
 			/* ROTARY_BTN */
 			MX6QDL_PAD_NANDF_D5__GPIO2_IO05			0x1b0b0
 			/* nON_SWITCH */
 			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
 		>;
 	};

 	pinctrl_keypad: keypadgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_19__GPIO4_IO05			0x1b0b0
 		>;
 	};

 	pinctrl_rotary_ch: rotarychgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D3__GPIO2_IO03			0x1b0b0
 			MX6QDL_PAD_NANDF_D4__GPIO2_IO04			0x1b0b0
 		>;
 	};

 	pinctrl_touchscreen: touchscreengrp {
 		fsl,pins = <
 			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08		0x1b0b0
 			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09		0x1b0b0
 		>;
 	};
 };
	// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
	/*
	* Copyright (c) 2016 Protonic Holland
	* Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
	*/

	/dts-v1/;
	#include "imx6dl.dtsi"
	#include "imx6qdl-vicut1.dtsi"

	/ {
	model = "Kverneland TGO";
	compatible = "kvg,victgo", "fsl,imx6dl";

	gpio-keys {
	compatible = "gpio-keys";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_gpiokeys>;
	autorepeat;

	key-power {
	label = "Power Button";
	gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
	linux,code = <KEY_POWER>;
	wakeup-source;
	};

	key-enter {
	label = "Rotary Key";
	gpios = <&gpio2 05 GPIO_ACTIVE_LOW>;
	linux,code = <KEY_ENTER>;
	wakeup-source;
	};
	};

	iio-hwmon {
	compatible = "iio-hwmon";
	io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>;
	};

	panel {
	compatible = "lg,lb070wv8";
	backlight = <&backlight_lcd>;
	power-supply = <&reg_3v3>;

	port {
	panel_in: endpoint {
	remote-endpoint = <&lvds0_out>;
	};
	};
	};

	clk50m_phy: phy-clock {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <50000000>;
	clock-output-names = "enet_ref_pad";
	};

	rotary-encoder {
	compatible = "rotary-encoder";
	pinctrl-0 = <&pinctrl_rotary_ch>;
	gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>,
	<&gpio2 4 GPIO_ACTIVE_HIGH>;
	linux,axis = <REL_WHEEL>;
	rotary-encoder,steps-per-period = <4>;
	rotary-encoder,relative-axis;
	rotary-encoder,rollover;
	wakeup-source;
	};

	thermal-zones {
	chassis-thermal {
	polling-delay = <20000>;
	polling-delay-passive = <0>;
	thermal-sensors = <&tsens0>;

	trips {
	alert {
	temperature = <105000>; /* millicelsius */
	hysteresis = <2000>; /* millicelsius */
	type = "passive";
	};
	};
	};

	touch-thermal0 {
	polling-delay = <20000>;
	polling-delay-passive = <0>;
	thermal-sensors = <&touch_temp0>;

	trips {
	alert {
	temperature = <105000>; /* millicelsius */
	hysteresis = <2000>; /* millicelsius */
	type = "passive";
	};
	};
	};

	touch-thermal1 {
	polling-delay = <20000>;
	polling-delay-passive = <0>;
	thermal-sensors = <&touch_temp1>;

	trips {
	alert {
	temperature = <105000>; /* millicelsius */
	hysteresis = <2000>; /* millicelsius */
	type = "passive";
	};
	};
	};
	};

	touchscreen {
	compatible = "resistive-adc-touch";
	io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
	<&adc_ts 5>;
	io-channel-names = "y", "z1", "z2", "x";
	touchscreen-min-pressure = <64687>;
	touchscreen-inverted-y;
	touchscreen-x-plate-ohms = <300>;
	touchscreen-y-plate-ohms = <800>;
	};

	touch_temp0: touch-temperature-sensor0 {
	compatible = "generic-adc-thermal";
	#thermal-sensor-cells = <0>;
	io-channels = <&adc_ts 0>;
	io-channel-names = "sensor-channel";
	temperature-lookup-table = < (-40000) 736
	85000 474>;
	};

	touch_temp1: touch-temperature-sensor1 {
	compatible = "generic-adc-thermal";
	#thermal-sensor-cells = <0>;
	io-channels = <&adc_ts 7>;
	io-channel-names = "sensor-channel";
	temperature-lookup-table = < (-40000) 826
	85000 609>;
	};

	vdiv_vaccu: voltage-divider-vaccu {
	compatible = "voltage-divider";
	io-channels = <&adc_ts 2>;
	output-ohms = <2500>;
	full-ohms = <64000>;
	#io-channel-cells = <0>;
	};

	vdiv_hitch_pos: voltage-divider-hitch-pos {
	compatible = "voltage-divider";
	io-channels = <&adc_ts 6>;
	output-ohms = <3300>;
	full-ohms = <13300>;
	#io-channel-cells = <0>;
	};
	};

	&clks {
	clocks = <&clk50m_phy>;
	clock-names = "enet_ref_pad";
	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
	assigned-clock-parents = <&clk50m_phy>;
	};

	&ecspi2 {
	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi2>;
	status = "okay";

	adc_ts: adc@0 {
	compatible = "ti,tsc2046e-adc";
	reg = <0>;
	pinctrl-0 = <&pinctrl_touchscreen>;
	pinctrl-names = "default";
	spi-max-frequency = <1000000>;
	interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
	#io-channel-cells = <1>;

	#address-cells = <1>;
	#size-cells = <0>;

	channel@1 {
	reg = <1>;
	settling-time-us = <700>;
	oversampling-ratio = <5>;
	};

	channel@3 {
	reg = <3>;
	settling-time-us = <700>;
	oversampling-ratio = <5>;
	};

	channel@4 {
	reg = <4>;
	settling-time-us = <700>;
	oversampling-ratio = <5>;
	};

	channel@5 {
	reg = <5>;
	settling-time-us = <700>;
	oversampling-ratio = <5>;
	};
	};
	};

	&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet>;
	phy-mode = "rmii";
	phy-handle = <&rmii_phy>;
	status = "okay";

	mdio {
	#address-cells = <1>;
	#size-cells = <0>;

	/* Microchip KSZ8081RNA PHY */
	rmii_phy: ethernet-phy@0 {
	reg = <0>;
	interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
	reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
	reset-assert-us = <10000>;
	reset-deassert-us = <300>;
	};
	};
	};

	&gpio1 {
	gpio-line-names =
	"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
	"CAM2_MIRROR", "", "", "SMBALERT",
	"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
	"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
	"SD1_DATA3", "ETH_MDIO", "",
	"", "", "", "", "", "", "", "ETH_MDC";
	};

	&gpio4 {
	gpio-line-names =
	"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
	"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
	"CAN2_SR", "CAN2_TX", "CAN2_RX",
	"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
	"HITCH_IN_OUT",
	"LIGHT_ON", "", "ETH_RESET", "CONTACT_IN", "BL_EN",
	"BL_PWM", "ETH_INT", "ISB_LED";
	};

	&gpio5 {
	gpio-line-names =
	"", "", "", "", "", "", "", "",
	"TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO",
	"ECSPI2_SS0", "ECSPI2_SCLK", "", "",
	"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
	"I2S_BITCLK", "I2S_DOUT",
	"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
	"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
	};

	&gpio6 {
	gpio-line-names =
	"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
	"ITU656_D6", "ITU656_D7", "", "",
	"", "", "", "", "", "", "", "",
	"", "", "", "", "", "", "", "",
	"", "", "", "", "", "", "", "";
	};

	&i2c1 {
	keypad@70 {
	compatible = "holtek,ht16k33";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_keypad>;
	reg = <0x70>;
	refresh-rate-hz = <20>;
	debounce-delay-ms = <50>;
	interrupts-extended = <&gpio4 5 (IRQ_TYPE_LEVEL_HIGH \| IRQ_TYPE_EDGE_RISING)>;
	keypad,num-rows = <12>;
	keypad,num-columns = <3>;
	linux,keymap = <
	MATRIX_KEY(2, 0, KEY_F6)
	MATRIX_KEY(3, 0, KEY_F8)
	MATRIX_KEY(4, 0, KEY_F10)
	MATRIX_KEY(5, 0, KEY_F4)
	MATRIX_KEY(6, 0, KEY_F2)
	MATRIX_KEY(2, 1, KEY_F5)
	MATRIX_KEY(3, 1, KEY_F7)
	MATRIX_KEY(4, 1, KEY_F9)
	MATRIX_KEY(5, 1, KEY_F3)
	MATRIX_KEY(6, 1, KEY_F1)
	>;
	};
	};

	&iomuxc {
	pinctrl_ecspi2: ecspi2grp {
	fsl,pins = <
	MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1
	MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1
	MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1
	MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1
	>;
	};

	pinctrl_enet: enetgrp {
	fsl,pins = <
	/* MX6QDL_ENET_PINGRP4 */
	MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
	MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
	MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
	MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
	MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
	MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
	MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
	MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
	MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
	MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
	/* Phy reset */
	MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
	/* nINTRP */
	MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
	>;
	};

	pinctrl_gpiokeys: gpiokeygrp {
	fsl,pins = <
	/* ROTARY_BTN */
	MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0
	/* nON_SWITCH */
	MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0
	>;
	};

	pinctrl_keypad: keypadgrp {
	fsl,pins = <
	MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
	>;
	};

	pinctrl_rotary_ch: rotarychgrp {
	fsl,pins = <
	MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
	MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
	>;
	};

	pinctrl_touchscreen: touchscreengrp {
	fsl,pins = <
	MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b0
	MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0
	>;
	};
	};