| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2000-2003 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| */ |
| |
| #include <common.h> |
| #include <init.h> |
| #include <asm/immap.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int checkboard (void) |
| { |
| puts ("Board: Freescale M5282EVB Evaluation Board\n"); |
| return 0; |
| } |
| |
| int dram_init(void) |
| { |
| u32 dramsize, i, dramclk; |
| |
| dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; |
| for (i = 0x13; i < 0x20; i++) { |
| if (dramsize == (1 << i)) |
| break; |
| } |
| i--; |
| |
| if (!(MCFSDRAMC_DACR0 & MCFSDRAMC_DACR_RE)) |
| { |
| dramclk = gd->bus_clk / (CONFIG_SYS_HZ * CONFIG_SYS_HZ); |
| |
| /* Initialize DRAM Control Register: DCR */ |
| MCFSDRAMC_DCR = (0 |
| | MCFSDRAMC_DCR_RTIM_6 |
| | MCFSDRAMC_DCR_RC((15 * dramclk)>>4)); |
| asm("nop"); |
| |
| /* Initialize DACR0 */ |
| MCFSDRAMC_DACR0 = (0 |
| | MCFSDRAMC_DACR_BASE(CONFIG_SYS_SDRAM_BASE) |
| | MCFSDRAMC_DACR_CASL(1) |
| | MCFSDRAMC_DACR_CBM(3) |
| | MCFSDRAMC_DACR_PS_32); |
| asm("nop"); |
| |
| /* Initialize DMR0 */ |
| MCFSDRAMC_DMR0 = (0 |
| | ((dramsize - 1) & 0xFFFC0000) |
| | MCFSDRAMC_DMR_V); |
| asm("nop"); |
| |
| /* Set IP (bit 3) in DACR */ |
| MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP; |
| asm("nop"); |
| |
| /* Wait 30ns to allow banks to precharge */ |
| for (i = 0; i < 5; i++) { |
| asm ("nop"); |
| } |
| |
| /* Write to this block to initiate precharge */ |
| *(u32 *)(CONFIG_SYS_SDRAM_BASE) = 0xA5A59696; |
| asm("nop"); |
| |
| /* Set RE (bit 15) in DACR */ |
| MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE; |
| asm("nop"); |
| |
| /* Wait for at least 8 auto refresh cycles to occur */ |
| for (i = 0; i < 2000; i++) { |
| asm(" nop"); |
| } |
| |
| /* Finish the configuration by issuing the IMRS. */ |
| MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IMRS; |
| asm("nop"); |
| |
| /* Write to the SDRAM Mode Register */ |
| *(u32 *)(CONFIG_SYS_SDRAM_BASE + 0x400) = 0xA5A59696; |
| } |
| gd->ram_size = dramsize; |
| |
| return 0; |
| } |