| /* |
| * board/renesas/salvator-x/salvator-x.c |
| * This file is Salvator-X board support. |
| * |
| * Copyright (C) 2015 Renesas Electronics Corporation |
| * Copyright (C) 2015 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <malloc.h> |
| #include <netdev.h> |
| #include <dm.h> |
| #include <dm/platform_data/serial_sh.h> |
| #include <asm/processor.h> |
| #include <asm/mach-types.h> |
| #include <asm/io.h> |
| #include <asm/errno.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/gpio.h> |
| #include <asm/arch/gpio.h> |
| #include <asm/arch/rmobile.h> |
| #include <asm/arch/rcar-mstp.h> |
| #include <i2c.h> |
| #include <mmc.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define CPGWPCR 0xE6150904 |
| #define CPGWPR 0xE615090C |
| |
| #define CLK2MHZ(clk) (clk / 1000 / 1000) |
| void s_init(void) |
| { |
| struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE; |
| struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE; |
| |
| /* Watchdog init */ |
| writel(0xA5A5A500, &rwdt->rwtcsra); |
| writel(0xA5A5A500, &swdt->swtcsra); |
| |
| writel(0xA5A50000, CPGWPCR); |
| writel(0xFFFFFFFF, CPGWPR); |
| } |
| |
| #define GSX_MSTP112 (1 << 12) /* 3DG */ |
| #define TMU0_MSTP125 (1 << 25) /* secure */ |
| #define TMU1_MSTP124 (1 << 24) /* non-secure */ |
| #define SCIF2_MSTP310 (1 << 10) /* SCIF2 */ |
| |
| int board_early_init_f(void) |
| { |
| /* TMU0,1 */ /* which use ? */ |
| mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125 | TMU1_MSTP124); |
| /* SCIF2 */ |
| mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SCIF2_MSTP310); |
| |
| return 0; |
| } |
| |
| /* SYSC */ |
| /* R/- 32 Power status register 2(3DG) */ |
| #define SYSC_PWRSR2 0xE6180100 |
| /* -/W 32 Power resume control register 2 (3DG) */ |
| #define SYSC_PWRONCR2 0xE618010C |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| int board_init(void) |
| { |
| /* adress of boot parameters */ |
| gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000; |
| |
| /* Init PFC controller */ |
| r8a7795_pinmux_init(); |
| |
| /* GSX: force power and clock supply */ |
| writel(0x0000001F, SYSC_PWRONCR2); |
| while (readl(SYSC_PWRSR2) != 0x000003E0) |
| mdelay(20); |
| |
| mstp_clrbits_le32(MSTPSR1, SMSTPCR1, GSX_MSTP112); |
| |
| return 0; |
| } |
| |
| int dram_init(void) |
| { |
| gd->ram_size = CONFIG_SYS_SDRAM_SIZE; |
| |
| return 0; |
| } |
| |
| const struct rmobile_sysinfo sysinfo = { |
| CONFIG_RCAR_BOARD_STRING |
| }; |
| |
| #define RST_BASE 0xE6160000 |
| #define RST_CA57RESCNT (RST_BASE + 0x40) |
| #define RST_CA53RESCNT (RST_BASE + 0x44) |
| #define RST_RSTOUTCR (RST_BASE + 0x58) |
| #define RST_CODE 0xA5A5000F |
| |
| void reset_cpu(ulong addr) |
| { |
| /* only CA57 ? */ |
| writel(RST_CODE, RST_CA57RESCNT); |
| } |
| |
| static const struct sh_serial_platdata serial_platdata = { |
| .base = SCIF2_BASE, |
| .type = PORT_SCIF, |
| .clk = 14745600, /* 0xE10000 */ |
| .clk_mode = EXT_CLK, |
| }; |
| |
| U_BOOT_DEVICE(salvator_x_scif2) = { |
| .name = "serial_sh", |
| .platdata = &serial_platdata, |
| }; |