| /* SPDX-License-Identifier: GPL-2.0+ |
| * |
| * NSIH (Nexell System Information Header) for FriendlyArm nanopi2 board |
| * |
| * The NSIH (first 512 Bytes of u-boot.bin) is necessary for the |
| * 2nd-Bootloader to get information like load address of U-Boot. |
| * |
| * 0x400 must be added to CONFIG_TEXT_BASE to have the actual load and |
| * start address because 2nd-Bootloader loads with an offset of 0x400 |
| * (NSIH + 0x200 bytes are not loaded into RAM). |
| * |
| * It has been tested / is working with the following 2nd-Bootloader: |
| * "BL1 by Nexell V1.0.0-gd551e13 [Built on 2018-01-25 16:58:29]" |
| * |
| * (C) Copyright 2020 Stefan Bosch <stefan_b@posteo.net> |
| */ |
| |
| #ifndef __BOOT0_H |
| #define __BOOT0_H |
| |
| ARM_VECTORS |
| .space 0x30 |
| .word (_end - _start) + 20 * 1024 /* 0x50: load size |
| * (bin + 20k for DTB) */ |
| .space 0x4 |
| .word CONFIG_TEXT_BASE + 0x400 /* 0x58: load address */ |
| .word 0x00000000 |
| .word CONFIG_TEXT_BASE + 0x400 /* 0x60: start address */ |
| .space 0x198 |
| .byte 'N' /* 0x1FC: "NSIH" signature */ |
| .byte 'S' |
| .byte 'I' |
| .byte 'H' |
| |
| /* The NSIH + 0x200 bytes are omitted by the 2nd-Bootloader */ |
| .space 0x200 |
| _start: |
| ARM_VECTORS |
| |
| #endif /* __BOOT0_H */ |