board/gdsys/gdppc440etx/gdppc440etx.c - filogic/uboot - Gitiles

 /*
  * (C) Copyright 2008
  * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
  *
  * Based on board/amcc/yosemite/yosemite.c
  * (C) Copyright 2006-2007
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>
 #include <ppc4xx.h>
 #include <asm/processor.h>
 #include <asm/io.h>

 DECLARE_GLOBAL_DATA_PTR;

 /* info for FLASH chips */
 extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];

 int board_early_init_f(void)
 {
 	register uint reg;

 	/*
 	 * Setup the external bus controller/chip selects
 	 */
 	mfebc(EBC0_CFG, reg);
 	mtebc(EBC0_CFG, reg | 0x04000000);		/* Set ATC */

 	/*
 	 * Setup the GPIO pins
 	 */

 	/* setup Address lines for flash size 64Meg. */
 	out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x54000000);
 	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x54000000);
 	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x54000000);

 	/* setup emac */
 	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
 	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
 	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
 	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
 	out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);

 	/* UART0 and UART1*/
 	out32(GPIO1_TCR, in32(GPIO1_TCR)     | 0x16000000);
 	out32(GPIO1_OSRL, in32(GPIO1_OSRL)   | 0x02180000);
 	out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) | 0x00400000);
 	out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x04010000);

 	/* disable boot-eeprom WP */
 	out32(GPIO0_OSRL, in32(GPIO0_OSRL) & ~0x00C00000);
 	out32(GPIO0_TSRL, in32(GPIO0_TSRL) & ~0x00C00000);
 	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) & ~0x00C00000);
 	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0x08000000);
 	out32(GPIO0_OR, in32(GPIO0_OR) & ~0x08000000);

 	/* external interrupts IRQ0...3 */
 	out32(GPIO1_TCR, in32(GPIO1_TCR) & ~0x00f00000);
 	out32(GPIO1_TSRL, in32(GPIO1_TSRL) & ~0x00005500);
 	out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) | 0x00005500);


 	/*
 	 * Setup the interrupt controller polarities, triggers, etc.
 	 */
 	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
 	mtdcr(UIC0ER, 0x00000000);	/* disable all */
 	mtdcr(UIC0CR, 0x00000009);	/* ATI & UIC1 crit are critical */
 	mtdcr(UIC0PR, 0xfffffe13);	/* per ref-board manual */
 	mtdcr(UIC0TR, 0x01c00008);	/* per ref-board manual */
 	mtdcr(UIC0VR, 0x00000001);	/* int31 highest, base=0x000 */
 	mtdcr(UIC0SR, 0xffffffff);	/* clear all */

 	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
 	mtdcr(UIC1ER, 0x00000000);	/* disable all */
 	mtdcr(UIC1CR, 0x00000000);	/* all non-critical */
 	mtdcr(UIC1PR, 0xffffe0ff);	/* per ref-board manual */
 	mtdcr(UIC1TR, 0x00ffc000);	/* per ref-board manual */
 	mtdcr(UIC1VR, 0x00000001);	/* int31 highest, base=0x000 */
 	mtdcr(UIC1SR, 0xffffffff);	/* clear all */

 	/*
 	 * Setup other serial configuration
 	 */
 	mfsdr(SDR0_PCI0, reg);
 	mtsdr(SDR0_PCI0, 0x80000000 | reg);	/* PCI arbiter enabled */
 	mtsdr(SDR0_PFC0, 0x00003e00);	/* Pin function */
 	mtsdr(SDR0_PFC1, 0x00048000);	/* Pin function: UART0 has 4 pins */

 	return 0;
 }

 int misc_init_r(void)
 {
 	uint pbcr;
 	int size_val;
 	uint sz;

 	/* Re-do sizing to get full correct info */
 	mfebc(PB0CR, pbcr);

 	if (gd->bd->bi_flashsize > 0x08000000)
 		panic("Max. flash banksize is 128 MB!\n");

 	for (sz = gd->bd->bi_flashsize, size_val = 7;
 	    ((sz & 0x08000000) == 0) && (size_val > 0); --size_val)
 		sz <<= 1;

 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
 	mtebc(PB0CR, pbcr);

 	/* adjust flash start and offset */
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
 	gd->bd->bi_flashoffset = 0;

 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
 			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);

 	return 0;
 }

 int checkboard(void)
 {
 	char *s = getenv("serial#");

 	printf("Board: GDPPC440ETX - G&D PPC440EP/GR ETX-module");

 	if (s != NULL) {
 		puts(", serial# ");
 		puts(s);
 	}
 	putc('\n');

 	return 0;
 }

 /*
  * pci_pre_init
  *
  * This routine is called just prior to registering the hose and gives
  * the board the opportunity to check things. Returning a value of zero
  * indicates that things are bad & PCI initialization should be aborted.
  *
  *	Different boards may wish to customize the pci controller structure
  *	(add regions, override default access routines, etc) or perform
  *	certain pre-initialization actions.
  *
  */
 #if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller *hose)
 {
 	unsigned long addr;

 	/*
 	 * Set priority for all PLB3 devices to 0.
 	 * Set PLB3 arbiter to fair mode.
 	 */
 	mfsdr(SD0_AMP1, addr);
 	mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00);
 	addr = mfdcr(PLB3_ACR);
 	mtdcr(PLB3_ACR, addr | 0x80000000);

 	/*
 	 * Set priority for all PLB4 devices to 0.
 	 */
 	mfsdr(SD0_AMP0, addr);
 	mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00);
 	addr = mfdcr(PLB4_ACR) | 0xa0000000;	/* Was 0x8---- */
 	mtdcr(PLB4_ACR, addr);

 	/*
 	 * Set Nebula PLB4 arbiter to fair mode.
 	 */
 	/* Segment0 */
 	addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR;
 	addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED;
 	addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP;
 	addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP;
 	mtdcr(PLB0_ACR, addr);

 	/* Segment1 */
 	addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR;
 	addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED;
 	addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP;
 	addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP;
 	mtdcr(PLB1_ACR, addr);

 	/* enable 66 MHz ext. Clock */
 	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x00008000);
 	out32(GPIO1_OR, in32(GPIO1_OR) | 0x00008000);

 	return 1;
 }
 #endif	/* defined(CONFIG_PCI) */

 /*
  * pci_target_init
  *
  * The bootstrap configuration provides default settings for the pci
  * inbound map (PIM). But the bootstrap config choices are limited and
  * may not be sufficient for a given board.
  *
  */
 #if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
 	/*
 	 * Set up Direct MMIO registers
 	 */

 	/*
 	 * PowerPC440 EP PCI Master configuration.
 	 * Map one 1Gig range of PLB/processor addresses to PCI memory space.
 	 *       PLB address 0xA0000000-0xDFFFFFFF
 	 *   ==> PCI address 0xA0000000-0xDFFFFFFF
 	 *   Use byte reversed out routines to handle endianess.
 	 * Make this region non-prefetchable.
 	 */
 	out32r(PCIL0_PMM0MA, 0x00000000); 	/* disabled b4 setting */
 	out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);
 	out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);
 	out32r(PCIL0_PMM0PCIHA, 0x00000000);
 	out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M, no prefetch, enable region */

 	out32r(PCIL0_PMM1MA, 0x00000000);	/* disabled b4 setting */
 	out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);
 	out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);
 	out32r(PCIL0_PMM1PCIHA, 0x00000000);
 	out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M, no prefetch, enable region */

 	out32r(PCIL0_PTM1MS, 0x00000001);
 	out32r(PCIL0_PTM1LA, 0);
 	out32r(PCIL0_PTM2MS, 0);
 	out32r(PCIL0_PTM2LA, 0);

 	/*
 	 * Set up Configuration registers
 	 */

 	/* Program the board's subsystem id/vendor id */
 	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
 			      CONFIG_SYS_PCI_SUBSYS_VENDORID);
 	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);

 	/* Configure command register as bus master */
 	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);

 	/* 240nS PCI clock */
 	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);

 	/* No error reporting */
 	pci_write_config_word(0, PCI_ERREN, 0);

 	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);

 }
 #endif	/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */

 /*
  *  pci_master_init
  *
  */
 #if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
 void pci_master_init(struct pci_controller *hose)
 {
 	unsigned short temp_short;

 	/*
 	 * Write the PowerPC440 EP PCI Configuration regs.
 	 *   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
 	 *   Enable PowerPC440 EP to act as a PCI memory target (PTM).
 	 */
 	pci_read_config_word(0, PCI_COMMAND, &temp_short);
 	pci_write_config_word(0, PCI_COMMAND,
 			      temp_short | PCI_COMMAND_MASTER |
 			      PCI_COMMAND_MEMORY);
 }
 #endif	/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */

 /*
  *  is_pci_host
  *
  *	This routine is called to determine if a pci scan should be
  *	performed. With various hardware environments (especially cPCI and
  *	PPMC) it's insufficient to depend on the state of the arbiter enable
  *	bit in the strap register, or generic host/adapter assumptions.
  *
  *	Rather than hard-code a bad assumption in the general 440 code, the
  *	440 pci code requires the board to decide at runtime.
  *
  *	Return 0 for adapter mode, non-zero for host (monarch) mode.
  *
  *
  */
 #if defined(CONFIG_PCI)
 int is_pci_host(struct pci_controller *hose)
 {
 	return 1;
 }
 #endif	/* defined(CONFIG_PCI) */
	/*
	* (C) Copyright 2008
	* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
	*
	* Based on board/amcc/yosemite/yosemite.c
	* (C) Copyright 2006-2007
	* Stefan Roese, DENX Software Engineering, sr@denx.de.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>
	#include <ppc4xx.h>
	#include <asm/processor.h>
	#include <asm/io.h>

	DECLARE_GLOBAL_DATA_PTR;

	/* info for FLASH chips */
	extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];

	int board_early_init_f(void)
	{
	register uint reg;

	/*
	* Setup the external bus controller/chip selects
	*/
	mfebc(EBC0_CFG, reg);
	mtebc(EBC0_CFG, reg \| 0x04000000); /* Set ATC */

	/*
	* Setup the GPIO pins
	*/

	/* setup Address lines for flash size 64Meg. */
	out32(GPIO0_OSRL, in32(GPIO0_OSRL) \| 0x54000000);
	out32(GPIO0_TSRL, in32(GPIO0_TSRL) \| 0x54000000);
	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) \| 0x54000000);

	/* setup emac */
	out32(GPIO0_TCR, in32(GPIO0_TCR) \| 0xC080);
	out32(GPIO0_TSRL, in32(GPIO0_TSRL) \| 0x40);
	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) \| 0x55);
	out32(GPIO0_OSRH, in32(GPIO0_OSRH) \| 0x50004000);
	out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) \| 0x00440000);

	/* UART0 and UART1*/
	out32(GPIO1_TCR, in32(GPIO1_TCR) \| 0x16000000);
	out32(GPIO1_OSRL, in32(GPIO1_OSRL) \| 0x02180000);
	out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) \| 0x00400000);
	out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) \| 0x04010000);

	/* disable boot-eeprom WP */
	out32(GPIO0_OSRL, in32(GPIO0_OSRL) & ~0x00C00000);
	out32(GPIO0_TSRL, in32(GPIO0_TSRL) & ~0x00C00000);
	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) & ~0x00C00000);
	out32(GPIO0_TCR, in32(GPIO0_TCR) \| 0x08000000);
	out32(GPIO0_OR, in32(GPIO0_OR) & ~0x08000000);

	/* external interrupts IRQ0...3 */
	out32(GPIO1_TCR, in32(GPIO1_TCR) & ~0x00f00000);
	out32(GPIO1_TSRL, in32(GPIO1_TSRL) & ~0x00005500);
	out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) \| 0x00005500);


	/*
	* Setup the interrupt controller polarities, triggers, etc.
	*/
	mtdcr(UIC0SR, 0xffffffff); /* clear all */
	mtdcr(UIC0ER, 0x00000000); /* disable all */
	mtdcr(UIC0CR, 0x00000009); /* ATI & UIC1 crit are critical */
	mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */
	mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */
	mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */
	mtdcr(UIC0SR, 0xffffffff); /* clear all */

	mtdcr(UIC1SR, 0xffffffff); /* clear all */
	mtdcr(UIC1ER, 0x00000000); /* disable all */
	mtdcr(UIC1CR, 0x00000000); /* all non-critical */
	mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */
	mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */
	mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
	mtdcr(UIC1SR, 0xffffffff); /* clear all */

	/*
	* Setup other serial configuration
	*/
	mfsdr(SDR0_PCI0, reg);
	mtsdr(SDR0_PCI0, 0x80000000 \| reg); /* PCI arbiter enabled */
	mtsdr(SDR0_PFC0, 0x00003e00); /* Pin function */
	mtsdr(SDR0_PFC1, 0x00048000); /* Pin function: UART0 has 4 pins */

	return 0;
	}

	int misc_init_r(void)
	{
	uint pbcr;
	int size_val;
	uint sz;

	/* Re-do sizing to get full correct info */
	mfebc(PB0CR, pbcr);

	if (gd->bd->bi_flashsize > 0x08000000)
	panic("Max. flash banksize is 128 MB!\n");

	for (sz = gd->bd->bi_flashsize, size_val = 7;
	((sz & 0x08000000) == 0) && (size_val > 0); --size_val)
	sz <<= 1;

	pbcr = (pbcr & 0x0001ffff) \| gd->bd->bi_flashstart \| (size_val << 17);
	mtebc(PB0CR, pbcr);

	/* adjust flash start and offset */
	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
	gd->bd->bi_flashoffset = 0;

	/* Monitor protection ON by default */
	(void)flash_protect(FLAG_PROTECT_SET,
	-CONFIG_SYS_MONITOR_LEN,
	0xffffffff,
	&flash_info[0]);

	return 0;
	}

	int checkboard(void)
	{
	char *s = getenv("serial#");

	printf("Board: GDPPC440ETX - G&D PPC440EP/GR ETX-module");

	if (s != NULL) {
	puts(", serial# ");
	puts(s);
	}
	putc('\n');

	return 0;
	}

	/*
	* pci_pre_init
	*
	* This routine is called just prior to registering the hose and gives
	* the board the opportunity to check things. Returning a value of zero
	* indicates that things are bad & PCI initialization should be aborted.
	*
	* Different boards may wish to customize the pci controller structure
	* (add regions, override default access routines, etc) or perform
	* certain pre-initialization actions.
	*
	*/
	#if defined(CONFIG_PCI)
	int pci_pre_init(struct pci_controller *hose)
	{
	unsigned long addr;

	/*
	* Set priority for all PLB3 devices to 0.
	* Set PLB3 arbiter to fair mode.
	*/
	mfsdr(SD0_AMP1, addr);
	mtsdr(SD0_AMP1, (addr & 0x000000FF) \| 0x0000FF00);
	addr = mfdcr(PLB3_ACR);
	mtdcr(PLB3_ACR, addr \| 0x80000000);

	/*
	* Set priority for all PLB4 devices to 0.
	*/
	mfsdr(SD0_AMP0, addr);
	mtsdr(SD0_AMP0, (addr & 0x000000FF) \| 0x0000FF00);
	addr = mfdcr(PLB4_ACR) \| 0xa0000000; /* Was 0x8---- */
	mtdcr(PLB4_ACR, addr);

	/*
	* Set Nebula PLB4 arbiter to fair mode.
	*/
	/* Segment0 */
	addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) \| PLB0_ACR_PPM_FAIR;
	addr = (addr & ~PLB0_ACR_HBU_MASK) \| PLB0_ACR_HBU_ENABLED;
	addr = (addr & ~PLB0_ACR_RDP_MASK) \| PLB0_ACR_RDP_4DEEP;
	addr = (addr & ~PLB0_ACR_WRP_MASK) \| PLB0_ACR_WRP_2DEEP;
	mtdcr(PLB0_ACR, addr);

	/* Segment1 */
	addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) \| PLB1_ACR_PPM_FAIR;
	addr = (addr & ~PLB1_ACR_HBU_MASK) \| PLB1_ACR_HBU_ENABLED;
	addr = (addr & ~PLB1_ACR_RDP_MASK) \| PLB1_ACR_RDP_4DEEP;
	addr = (addr & ~PLB1_ACR_WRP_MASK) \| PLB1_ACR_WRP_2DEEP;
	mtdcr(PLB1_ACR, addr);

	/* enable 66 MHz ext. Clock */
	out32(GPIO1_TCR, in32(GPIO1_TCR) \| 0x00008000);
	out32(GPIO1_OR, in32(GPIO1_OR) \| 0x00008000);

	return 1;
	}
	#endif /* defined(CONFIG_PCI) */

	/*
	* pci_target_init
	*
	* The bootstrap configuration provides default settings for the pci
	* inbound map (PIM). But the bootstrap config choices are limited and
	* may not be sufficient for a given board.
	*
	*/
	#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
	void pci_target_init(struct pci_controller *hose)
	{
	/*
	* Set up Direct MMIO registers
	*/

	/*
	* PowerPC440 EP PCI Master configuration.
	* Map one 1Gig range of PLB/processor addresses to PCI memory space.
	* PLB address 0xA0000000-0xDFFFFFFF
	* ==> PCI address 0xA0000000-0xDFFFFFFF
	* Use byte reversed out routines to handle endianess.
	* Make this region non-prefetchable.
	*/
	out32r(PCIL0_PMM0MA, 0x00000000); /* disabled b4 setting */
	out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);
	out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);
	out32r(PCIL0_PMM0PCIHA, 0x00000000);
	out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M, no prefetch, enable region */

	out32r(PCIL0_PMM1MA, 0x00000000); /* disabled b4 setting */
	out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);
	out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);
	out32r(PCIL0_PMM1PCIHA, 0x00000000);
	out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M, no prefetch, enable region */

	out32r(PCIL0_PTM1MS, 0x00000001);
	out32r(PCIL0_PTM1LA, 0);
	out32r(PCIL0_PTM2MS, 0);
	out32r(PCIL0_PTM2LA, 0);

	/*
	* Set up Configuration registers
	*/

	/* Program the board's subsystem id/vendor id */
	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
	CONFIG_SYS_PCI_SUBSYS_VENDORID);
	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);

	/* Configure command register as bus master */
	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);

	/* 240nS PCI clock */
	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);

	/* No error reporting */
	pci_write_config_word(0, PCI_ERREN, 0);

	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);

	}
	#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */

	/*
	* pci_master_init
	*
	*/
	#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
	void pci_master_init(struct pci_controller *hose)
	{
	unsigned short temp_short;

	/*
	* Write the PowerPC440 EP PCI Configuration regs.
	* Enable PowerPC440 EP to be a master on the PCI bus (PMM).
	* Enable PowerPC440 EP to act as a PCI memory target (PTM).
	*/
	pci_read_config_word(0, PCI_COMMAND, &temp_short);
	pci_write_config_word(0, PCI_COMMAND,
	temp_short \| PCI_COMMAND_MASTER \|
	PCI_COMMAND_MEMORY);
	}
	#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */

	/*
	* is_pci_host
	*
	* This routine is called to determine if a pci scan should be
	* performed. With various hardware environments (especially cPCI and
	* PPMC) it's insufficient to depend on the state of the arbiter enable
	* bit in the strap register, or generic host/adapter assumptions.
	*
	* Rather than hard-code a bad assumption in the general 440 code, the
	* 440 pci code requires the board to decide at runtime.
	*
	* Return 0 for adapter mode, non-zero for host (monarch) mode.
	*
	*
	*/
	#if defined(CONFIG_PCI)
	int is_pci_host(struct pci_controller *hose)
	{
	return 1;
	}
	#endif /* defined(CONFIG_PCI) */