rockchip: px30: Rename CONFIG_DEBUG_UART2_CHANNEL to CONFIG_DEBUG_UART_CHANNEL
UART3 also has two sets of pins that can be selected.
Rename the config option to a common name, to allow it to be used for both
UART2 and UART3.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig
index 109a37b..9f3ad4f 100644
--- a/arch/arm/mach-rockchip/px30/Kconfig
+++ b/arch/arm/mach-rockchip/px30/Kconfig
@@ -27,12 +27,12 @@
config TPL_STACK
default 0xff0e4fff
-config DEBUG_UART2_CHANNEL
- int "Mux channel to use for debug UART2"
+config DEBUG_UART_CHANNEL
+ int "Mux channel to use for debug UART2/UART3"
depends on DEBUG_UART_BOARD_INIT
default 0
help
- UART2 can use two different set of pins to route the output.
+ UART2 and UART3 can use two different set of pins to route the output.
For using the UART for early debugging the route to use needs
to be declared (0 or 1).
diff --git a/arch/arm/mach-rockchip/px30/px30.c b/arch/arm/mach-rockchip/px30/px30.c
index bacdcc0..a2241cf 100644
--- a/arch/arm/mach-rockchip/px30/px30.c
+++ b/arch/arm/mach-rockchip/px30/px30.c
@@ -222,7 +222,7 @@
UART2_CLK_SEL_MASK,
UART2_CLK_SEL_UART2 << UART2_CLK_SEL_SHIFT);
-#if (CONFIG_DEBUG_UART2_CHANNEL == 1)
+#if (CONFIG_DEBUG_UART_CHANNEL == 1)
/* Enable early UART2 */
rk_clrsetreg(&grf->iofunc_con0,
CON_IOMUX_UART2SEL_MASK,
@@ -241,7 +241,7 @@
GPIO1D3_MASK | GPIO1D2_MASK,
GPIO1D3_UART2_RXM0 << GPIO1D3_SHIFT |
GPIO1D2_UART2_TXM0 << GPIO1D2_SHIFT);
-#endif /* CONFIG_DEBUG_UART2_CHANNEL == 1 */
+#endif /* CONFIG_DEBUG_UART_CHANNEL == 1 */
#endif /* CONFIG_DEBUG_UART_BASE && CONFIG_DEBUG_UART_BASE == ... */
}