| /* |
| * Copyright (C) 2014 Freescale Semiconductor |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/types.h> |
| #include <malloc.h> |
| #include <net.h> |
| #include <hwconfig.h> |
| #include <phy.h> |
| #include <linux/compat.h> |
| |
| #include "ldpaa_eth.h" |
| |
| #undef CONFIG_PHYLIB |
| static int init_phy(struct eth_device *dev) |
| { |
| /*TODO for external PHY */ |
| |
| return 0; |
| } |
| |
| static void ldpaa_eth_rx(struct ldpaa_eth_priv *priv, |
| const struct dpaa_fd *fd) |
| { |
| u64 fd_addr; |
| uint16_t fd_offset; |
| uint32_t fd_length; |
| struct ldpaa_fas *fas; |
| uint32_t status, err; |
| u32 timeo = (CONFIG_SYS_HZ * 2) / 1000; |
| u32 time_start; |
| struct qbman_release_desc releasedesc; |
| struct qbman_swp *swp = dflt_dpio->sw_portal; |
| |
| fd_addr = ldpaa_fd_get_addr(fd); |
| fd_offset = ldpaa_fd_get_offset(fd); |
| fd_length = ldpaa_fd_get_len(fd); |
| |
| debug("Rx frame:data addr=0x%p size=0x%x\n", (u64 *)fd_addr, fd_length); |
| |
| if (fd->simple.frc & LDPAA_FD_FRC_FASV) { |
| /* Read the frame annotation status word and check for errors */ |
| fas = (struct ldpaa_fas *) |
| ((uint8_t *)(fd_addr) + |
| priv->buf_layout.private_data_size); |
| status = le32_to_cpu(fas->status); |
| if (status & LDPAA_ETH_RX_ERR_MASK) { |
| printf("Rx frame error(s): 0x%08x\n", |
| status & LDPAA_ETH_RX_ERR_MASK); |
| goto error; |
| } else if (status & LDPAA_ETH_RX_UNSUPP_MASK) { |
| printf("Unsupported feature in bitmask: 0x%08x\n", |
| status & LDPAA_ETH_RX_UNSUPP_MASK); |
| goto error; |
| } |
| } |
| |
| debug("Rx frame: To Upper layer\n"); |
| net_process_received_packet((uint8_t *)(fd_addr) + fd_offset, |
| fd_length); |
| |
| error: |
| flush_dcache_range(fd_addr, fd_addr + LDPAA_ETH_RX_BUFFER_SIZE); |
| qbman_release_desc_clear(&releasedesc); |
| qbman_release_desc_set_bpid(&releasedesc, dflt_dpbp->dpbp_attr.bpid); |
| time_start = get_timer(0); |
| do { |
| /* Release buffer into the QBMAN */ |
| err = qbman_swp_release(swp, &releasedesc, &fd_addr, 1); |
| } while (get_timer(time_start) < timeo && err == -EBUSY); |
| |
| if (err == -EBUSY) |
| printf("Rx frame: QBMAN buffer release fails\n"); |
| |
| return; |
| } |
| |
| static int ldpaa_eth_pull_dequeue_rx(struct eth_device *dev) |
| { |
| struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)dev->priv; |
| const struct ldpaa_dq *dq; |
| const struct dpaa_fd *fd; |
| int i = 5, err = 0, status; |
| u32 timeo = (CONFIG_SYS_HZ * 2) / 1000; |
| u32 time_start; |
| static struct qbman_pull_desc pulldesc; |
| struct qbman_swp *swp = dflt_dpio->sw_portal; |
| |
| while (--i) { |
| qbman_pull_desc_clear(&pulldesc); |
| qbman_pull_desc_set_numframes(&pulldesc, 1); |
| qbman_pull_desc_set_fq(&pulldesc, priv->rx_dflt_fqid); |
| |
| err = qbman_swp_pull(swp, &pulldesc); |
| if (err < 0) { |
| printf("Dequeue frames error:0x%08x\n", err); |
| continue; |
| } |
| |
| time_start = get_timer(0); |
| |
| do { |
| dq = qbman_swp_dqrr_next(swp); |
| } while (get_timer(time_start) < timeo && !dq); |
| |
| if (dq) { |
| /* Check for valid frame. If not sent a consume |
| * confirmation to QBMAN otherwise give it to NADK |
| * application and then send consume confirmation to |
| * QBMAN. |
| */ |
| status = (uint8_t)ldpaa_dq_flags(dq); |
| if ((status & LDPAA_DQ_STAT_VALIDFRAME) == 0) { |
| debug("Dequeue RX frames:"); |
| debug("No frame delivered\n"); |
| |
| qbman_swp_dqrr_consume(swp, dq); |
| continue; |
| } |
| |
| fd = ldpaa_dq_fd(dq); |
| |
| /* Obtain FD and process it */ |
| ldpaa_eth_rx(priv, fd); |
| qbman_swp_dqrr_consume(swp, dq); |
| break; |
| } else { |
| err = -ENODATA; |
| debug("No DQRR entries\n"); |
| break; |
| } |
| } |
| |
| return err; |
| } |
| |
| static int ldpaa_eth_tx(struct eth_device *net_dev, void *buf, int len) |
| { |
| struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)net_dev->priv; |
| struct dpaa_fd fd; |
| u64 buffer_start; |
| int data_offset, err; |
| u32 timeo = (CONFIG_SYS_HZ * 10) / 1000; |
| u32 time_start; |
| struct qbman_swp *swp = dflt_dpio->sw_portal; |
| struct qbman_eq_desc ed; |
| struct qbman_release_desc releasedesc; |
| |
| /* Setup the FD fields */ |
| memset(&fd, 0, sizeof(fd)); |
| |
| data_offset = priv->tx_data_offset; |
| |
| do { |
| err = qbman_swp_acquire(dflt_dpio->sw_portal, |
| dflt_dpbp->dpbp_attr.bpid, |
| &buffer_start, 1); |
| } while (err == -EBUSY); |
| |
| if (err < 0) { |
| printf("qbman_swp_acquire() failed\n"); |
| return -ENOMEM; |
| } |
| |
| debug("TX data: malloc buffer start=0x%p\n", (u64 *)buffer_start); |
| |
| memcpy(((uint8_t *)(buffer_start) + data_offset), buf, len); |
| |
| flush_dcache_range(buffer_start, buffer_start + |
| LDPAA_ETH_RX_BUFFER_SIZE); |
| |
| ldpaa_fd_set_addr(&fd, (u64)buffer_start); |
| ldpaa_fd_set_offset(&fd, (uint16_t)(data_offset)); |
| ldpaa_fd_set_bpid(&fd, dflt_dpbp->dpbp_attr.bpid); |
| ldpaa_fd_set_len(&fd, len); |
| |
| fd.simple.ctrl = LDPAA_FD_CTRL_ASAL | LDPAA_FD_CTRL_PTA | |
| LDPAA_FD_CTRL_PTV1; |
| |
| qbman_eq_desc_clear(&ed); |
| qbman_eq_desc_set_no_orp(&ed, 0); |
| qbman_eq_desc_set_qd(&ed, priv->tx_qdid, priv->tx_flow_id, 0); |
| |
| time_start = get_timer(0); |
| |
| while (get_timer(time_start) < timeo) { |
| err = qbman_swp_enqueue(swp, &ed, |
| (const struct qbman_fd *)(&fd)); |
| if (err != -EBUSY) |
| break; |
| } |
| |
| if (err < 0) { |
| printf("error enqueueing Tx frame\n"); |
| goto error; |
| } |
| |
| return err; |
| |
| error: |
| qbman_release_desc_clear(&releasedesc); |
| qbman_release_desc_set_bpid(&releasedesc, dflt_dpbp->dpbp_attr.bpid); |
| time_start = get_timer(0); |
| do { |
| /* Release buffer into the QBMAN */ |
| err = qbman_swp_release(swp, &releasedesc, &buffer_start, 1); |
| } while (get_timer(time_start) < timeo && err == -EBUSY); |
| |
| if (err == -EBUSY) |
| printf("TX data: QBMAN buffer release fails\n"); |
| |
| return err; |
| } |
| |
| static int ldpaa_eth_open(struct eth_device *net_dev, bd_t *bd) |
| { |
| struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)net_dev->priv; |
| struct dpni_queue_attr rx_queue_attr; |
| uint8_t mac_addr[6]; |
| int err; |
| |
| if (net_dev->state == ETH_STATE_ACTIVE) |
| return 0; |
| |
| /* DPNI initialization */ |
| err = ldpaa_dpni_setup(priv); |
| if (err < 0) |
| goto err_dpni_setup; |
| |
| err = ldpaa_dpbp_setup(); |
| if (err < 0) |
| goto err_dpbp_setup; |
| |
| /* DPNI binding DPBP */ |
| err = ldpaa_dpni_bind(priv); |
| if (err) |
| goto err_bind; |
| |
| err = dpni_get_primary_mac_addr(dflt_mc_io, MC_CMD_NO_FLAGS, |
| priv->dpni_handle, mac_addr); |
| if (err) { |
| printf("dpni_get_primary_mac_addr() failed\n"); |
| return err; |
| } |
| |
| memcpy(net_dev->enetaddr, mac_addr, 0x6); |
| |
| /* setup the MAC address */ |
| if (net_dev->enetaddr[0] & 0x01) { |
| printf("%s: MacAddress is multcast address\n", __func__); |
| return 1; |
| } |
| |
| #ifdef CONFIG_PHYLIB |
| /* TODO Check this path */ |
| err = phy_startup(priv->phydev); |
| if (err) { |
| printf("%s: Could not initialize\n", priv->phydev->dev->name); |
| return err; |
| } |
| #else |
| priv->phydev->speed = SPEED_1000; |
| priv->phydev->link = 1; |
| priv->phydev->duplex = DUPLEX_FULL; |
| #endif |
| |
| err = dpni_enable(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle); |
| if (err < 0) { |
| printf("dpni_enable() failed\n"); |
| return err; |
| } |
| |
| /* TODO: support multiple Rx flows */ |
| err = dpni_get_rx_flow(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle, |
| 0, 0, &rx_queue_attr); |
| if (err) { |
| printf("dpni_get_rx_flow() failed\n"); |
| goto err_rx_flow; |
| } |
| |
| priv->rx_dflt_fqid = rx_queue_attr.fqid; |
| |
| err = dpni_get_qdid(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle, |
| &priv->tx_qdid); |
| if (err) { |
| printf("dpni_get_qdid() failed\n"); |
| goto err_qdid; |
| } |
| |
| if (!priv->phydev->link) |
| printf("%s: No link.\n", priv->phydev->dev->name); |
| |
| return priv->phydev->link ? 0 : -1; |
| |
| err_qdid: |
| err_rx_flow: |
| dpni_disable(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle); |
| err_bind: |
| ldpaa_dpbp_free(); |
| err_dpbp_setup: |
| dpni_close(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle); |
| err_dpni_setup: |
| return err; |
| } |
| |
| static void ldpaa_eth_stop(struct eth_device *net_dev) |
| { |
| struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)net_dev->priv; |
| int err = 0; |
| |
| if ((net_dev->state == ETH_STATE_PASSIVE) || |
| (net_dev->state == ETH_STATE_INIT)) |
| return; |
| /* Stop Tx and Rx traffic */ |
| err = dpni_disable(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle); |
| if (err < 0) |
| printf("dpni_disable() failed\n"); |
| |
| #ifdef CONFIG_PHYLIB |
| phy_shutdown(priv->phydev); |
| #endif |
| |
| ldpaa_dpbp_free(); |
| dpni_reset(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle); |
| dpni_close(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle); |
| } |
| |
| static void ldpaa_dpbp_drain_cnt(int count) |
| { |
| uint64_t buf_array[7]; |
| void *addr; |
| int ret, i; |
| |
| BUG_ON(count > 7); |
| |
| do { |
| ret = qbman_swp_acquire(dflt_dpio->sw_portal, |
| dflt_dpbp->dpbp_attr.bpid, |
| buf_array, count); |
| if (ret < 0) { |
| printf("qbman_swp_acquire() failed\n"); |
| return; |
| } |
| for (i = 0; i < ret; i++) { |
| addr = (void *)buf_array[i]; |
| debug("Free: buffer addr =0x%p\n", addr); |
| free(addr); |
| } |
| } while (ret); |
| } |
| |
| static void ldpaa_dpbp_drain(void) |
| { |
| int i; |
| for (i = 0; i < LDPAA_ETH_NUM_BUFS; i += 7) |
| ldpaa_dpbp_drain_cnt(7); |
| } |
| |
| static int ldpaa_bp_add_7(uint16_t bpid) |
| { |
| uint64_t buf_array[7]; |
| u8 *addr; |
| int i; |
| struct qbman_release_desc rd; |
| |
| for (i = 0; i < 7; i++) { |
| addr = memalign(L1_CACHE_BYTES, LDPAA_ETH_RX_BUFFER_SIZE); |
| if (!addr) { |
| printf("addr allocation failed\n"); |
| goto err_alloc; |
| } |
| memset(addr, 0x00, LDPAA_ETH_RX_BUFFER_SIZE); |
| flush_dcache_range((u64)addr, |
| (u64)(addr + LDPAA_ETH_RX_BUFFER_SIZE)); |
| |
| buf_array[i] = (uint64_t)addr; |
| debug("Release: buffer addr =0x%p\n", addr); |
| } |
| |
| release_bufs: |
| /* In case the portal is busy, retry until successful. |
| * This function is guaranteed to succeed in a reasonable amount |
| * of time. |
| */ |
| |
| do { |
| mdelay(1); |
| qbman_release_desc_clear(&rd); |
| qbman_release_desc_set_bpid(&rd, bpid); |
| } while (qbman_swp_release(dflt_dpio->sw_portal, &rd, buf_array, i)); |
| |
| return i; |
| |
| err_alloc: |
| if (i) |
| goto release_bufs; |
| |
| return 0; |
| } |
| |
| static int ldpaa_dpbp_seed(uint16_t bpid) |
| { |
| int i; |
| int count; |
| |
| for (i = 0; i < LDPAA_ETH_NUM_BUFS; i += 7) { |
| count = ldpaa_bp_add_7(bpid); |
| if (count < 7) |
| printf("Buffer Seed= %d\n", count); |
| } |
| |
| return 0; |
| } |
| |
| static int ldpaa_dpbp_setup(void) |
| { |
| int err; |
| |
| err = dpbp_open(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpbp->dpbp_attr.id, |
| &dflt_dpbp->dpbp_handle); |
| if (err) { |
| printf("dpbp_open() failed\n"); |
| goto err_open; |
| } |
| |
| err = dpbp_enable(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpbp->dpbp_handle); |
| if (err) { |
| printf("dpbp_enable() failed\n"); |
| goto err_enable; |
| } |
| |
| err = dpbp_get_attributes(dflt_mc_io, MC_CMD_NO_FLAGS, |
| dflt_dpbp->dpbp_handle, |
| &dflt_dpbp->dpbp_attr); |
| if (err) { |
| printf("dpbp_get_attributes() failed\n"); |
| goto err_get_attr; |
| } |
| |
| err = ldpaa_dpbp_seed(dflt_dpbp->dpbp_attr.bpid); |
| if (err) { |
| printf("Buffer seeding failed for DPBP %d (bpid=%d)\n", |
| dflt_dpbp->dpbp_attr.id, dflt_dpbp->dpbp_attr.bpid); |
| goto err_seed; |
| } |
| |
| return 0; |
| |
| err_seed: |
| err_get_attr: |
| dpbp_disable(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpbp->dpbp_handle); |
| err_enable: |
| dpbp_close(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpbp->dpbp_handle); |
| err_open: |
| return err; |
| } |
| |
| static void ldpaa_dpbp_free(void) |
| { |
| ldpaa_dpbp_drain(); |
| dpbp_disable(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpbp->dpbp_handle); |
| dpbp_reset(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpbp->dpbp_handle); |
| dpbp_close(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpbp->dpbp_handle); |
| } |
| |
| static int ldpaa_dpni_setup(struct ldpaa_eth_priv *priv) |
| { |
| int err; |
| |
| /* and get a handle for the DPNI this interface is associate with */ |
| err = dpni_open(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_id, |
| &priv->dpni_handle); |
| if (err) { |
| printf("dpni_open() failed\n"); |
| goto err_open; |
| } |
| |
| err = dpni_get_attributes(dflt_mc_io, MC_CMD_NO_FLAGS, |
| priv->dpni_handle, &priv->dpni_attrs); |
| if (err) { |
| printf("dpni_get_attributes() failed (err=%d)\n", err); |
| goto err_get_attr; |
| } |
| |
| /* Configure our buffers' layout */ |
| priv->buf_layout.options = DPNI_BUF_LAYOUT_OPT_PARSER_RESULT | |
| DPNI_BUF_LAYOUT_OPT_FRAME_STATUS | |
| DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE; |
| priv->buf_layout.pass_parser_result = true; |
| priv->buf_layout.pass_frame_status = true; |
| priv->buf_layout.private_data_size = LDPAA_ETH_SWA_SIZE; |
| /* ...rx, ... */ |
| err = dpni_set_rx_buffer_layout(dflt_mc_io, MC_CMD_NO_FLAGS, |
| priv->dpni_handle, &priv->buf_layout); |
| if (err) { |
| printf("dpni_set_rx_buffer_layout() failed"); |
| goto err_buf_layout; |
| } |
| |
| /* ... tx, ... */ |
| priv->buf_layout.options &= ~DPNI_BUF_LAYOUT_OPT_PARSER_RESULT; |
| err = dpni_set_tx_buffer_layout(dflt_mc_io, MC_CMD_NO_FLAGS, |
| priv->dpni_handle, &priv->buf_layout); |
| if (err) { |
| printf("dpni_set_tx_buffer_layout() failed"); |
| goto err_buf_layout; |
| } |
| |
| /* ... tx-confirm. */ |
| priv->buf_layout.options &= ~DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE; |
| err = dpni_set_tx_conf_buffer_layout(dflt_mc_io, MC_CMD_NO_FLAGS, |
| priv->dpni_handle, |
| &priv->buf_layout); |
| if (err) { |
| printf("dpni_set_tx_conf_buffer_layout() failed"); |
| goto err_buf_layout; |
| } |
| |
| /* Now that we've set our tx buffer layout, retrieve the minimum |
| * required tx data offset. |
| */ |
| err = dpni_get_tx_data_offset(dflt_mc_io, MC_CMD_NO_FLAGS, |
| priv->dpni_handle, &priv->tx_data_offset); |
| if (err) { |
| printf("dpni_get_tx_data_offset() failed\n"); |
| goto err_data_offset; |
| } |
| |
| /* Warn in case TX data offset is not multiple of 64 bytes. */ |
| WARN_ON(priv->tx_data_offset % 64); |
| |
| /* Accomodate SWA space. */ |
| priv->tx_data_offset += LDPAA_ETH_SWA_SIZE; |
| debug("priv->tx_data_offset=%d\n", priv->tx_data_offset); |
| |
| return 0; |
| |
| err_data_offset: |
| err_buf_layout: |
| err_get_attr: |
| dpni_close(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle); |
| err_open: |
| return err; |
| } |
| |
| static int ldpaa_dpni_bind(struct ldpaa_eth_priv *priv) |
| { |
| struct dpni_pools_cfg pools_params; |
| struct dpni_tx_flow_cfg dflt_tx_flow; |
| int err = 0; |
| |
| pools_params.num_dpbp = 1; |
| pools_params.pools[0].dpbp_id = (uint16_t)dflt_dpbp->dpbp_attr.id; |
| pools_params.pools[0].buffer_size = LDPAA_ETH_RX_BUFFER_SIZE; |
| err = dpni_set_pools(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle, |
| &pools_params); |
| if (err) { |
| printf("dpni_set_pools() failed\n"); |
| return err; |
| } |
| |
| priv->tx_flow_id = DPNI_NEW_FLOW_ID; |
| memset(&dflt_tx_flow, 0, sizeof(dflt_tx_flow)); |
| |
| dflt_tx_flow.options = DPNI_TX_FLOW_OPT_ONLY_TX_ERROR; |
| dflt_tx_flow.conf_err_cfg.use_default_queue = 0; |
| dflt_tx_flow.conf_err_cfg.errors_only = 1; |
| err = dpni_set_tx_flow(dflt_mc_io, MC_CMD_NO_FLAGS, priv->dpni_handle, |
| &priv->tx_flow_id, &dflt_tx_flow); |
| if (err) { |
| printf("dpni_set_tx_flow() failed\n"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int ldpaa_eth_netdev_init(struct eth_device *net_dev) |
| { |
| int err; |
| struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)net_dev->priv; |
| |
| sprintf(net_dev->name, "DPNI%d", priv->dpni_id); |
| |
| net_dev->iobase = 0; |
| net_dev->init = ldpaa_eth_open; |
| net_dev->halt = ldpaa_eth_stop; |
| net_dev->send = ldpaa_eth_tx; |
| net_dev->recv = ldpaa_eth_pull_dequeue_rx; |
| /* |
| TODO: PHY MDIO information |
| priv->bus = info->bus; |
| priv->phyaddr = info->phy_addr; |
| priv->enet_if = info->enet_if; |
| */ |
| |
| if (init_phy(net_dev)) |
| return 0; |
| |
| err = eth_register(net_dev); |
| if (err < 0) { |
| printf("eth_register() = %d\n", err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| int ldpaa_eth_init(struct dprc_obj_desc obj_desc) |
| { |
| struct eth_device *net_dev = NULL; |
| struct ldpaa_eth_priv *priv = NULL; |
| int err = 0; |
| |
| |
| /* Net device */ |
| net_dev = (struct eth_device *)malloc(sizeof(struct eth_device)); |
| if (!net_dev) { |
| printf("eth_device malloc() failed\n"); |
| return -ENOMEM; |
| } |
| memset(net_dev, 0, sizeof(struct eth_device)); |
| |
| /* alloc the ldpaa ethernet private struct */ |
| priv = (struct ldpaa_eth_priv *)malloc(sizeof(struct ldpaa_eth_priv)); |
| if (!priv) { |
| printf("ldpaa_eth_priv malloc() failed\n"); |
| return -ENOMEM; |
| } |
| memset(priv, 0, sizeof(struct ldpaa_eth_priv)); |
| |
| net_dev->priv = (void *)priv; |
| priv->net_dev = (struct eth_device *)net_dev; |
| priv->dpni_id = obj_desc.id; |
| |
| err = ldpaa_eth_netdev_init(net_dev); |
| if (err) |
| goto err_netdev_init; |
| |
| debug("ldpaa ethernet: Probed interface %s\n", net_dev->name); |
| return 0; |
| |
| err_netdev_init: |
| free(priv); |
| net_dev->priv = NULL; |
| free(net_dev); |
| |
| return err; |
| } |