| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * NVIDIA Tegra I2C controller |
| * |
| * Copyright 2010-2011 NVIDIA Corporation |
| */ |
| |
| #ifndef _TEGRA_I2C_H_ |
| #define _TEGRA_I2C_H_ |
| |
| #include <asm/types.h> |
| |
| struct udevice; |
| |
| enum { |
| I2C_TIMEOUT_USEC = 10000, /* Wait time for completion */ |
| I2C_FIFO_DEPTH = 8, /* I2C fifo depth */ |
| }; |
| |
| enum i2c_transaction_flags { |
| I2C_IS_WRITE = 0x1, /* for I2C write operation */ |
| I2C_IS_10_BIT_ADDRESS = 0x2, /* for 10-bit I2C slave address */ |
| I2C_USE_REPEATED_START = 0x4, /* for repeat start */ |
| I2C_NO_ACK = 0x8, /* for slave that won't generate ACK */ |
| I2C_SOFTWARE_CONTROLLER = 0x10, /* for I2C transfer using GPIO */ |
| I2C_NO_STOP = 0x20, |
| }; |
| |
| /* Contians the I2C transaction details */ |
| struct i2c_trans_info { |
| /* flags to indicate the transaction details */ |
| enum i2c_transaction_flags flags; |
| u32 address; /* I2C slave device address */ |
| u32 num_bytes; /* number of bytes to be transferred */ |
| /* |
| * Send/receive buffer. For the I2C send operation this buffer should |
| * be filled with the data to be sent to the slave device. For the I2C |
| * receive operation this buffer is filled with the data received from |
| * the slave device. |
| */ |
| u8 *buf; |
| int is_10bit_address; |
| }; |
| |
| struct i2c_control { |
| u32 tx_fifo; |
| u32 rx_fifo; |
| u32 packet_status; |
| u32 fifo_control; |
| u32 fifo_status; |
| u32 int_mask; |
| u32 int_status; |
| }; |
| |
| struct dvc_ctlr { |
| u32 ctrl1; /* 00: DVC_CTRL_REG1 */ |
| u32 ctrl2; /* 04: DVC_CTRL_REG2 */ |
| u32 ctrl3; /* 08: DVC_CTRL_REG3 */ |
| u32 status; /* 0C: DVC_STATUS_REG */ |
| u32 ctrl; /* 10: DVC_I2C_CTRL_REG */ |
| u32 addr_data; /* 14: DVC_I2C_ADDR_DATA_REG */ |
| u32 reserved_0[2]; /* 18: */ |
| u32 req; /* 20: DVC_REQ_REGISTER */ |
| u32 addr_data3; /* 24: DVC_I2C_ADDR_DATA_REG_3 */ |
| u32 reserved_1[6]; /* 28: */ |
| u32 cnfg; /* 40: DVC_I2C_CNFG */ |
| u32 cmd_addr0; /* 44: DVC_I2C_CMD_ADDR0 */ |
| u32 cmd_addr1; /* 48: DVC_I2C_CMD_ADDR1 */ |
| u32 cmd_data1; /* 4C: DVC_I2C_CMD_DATA1 */ |
| u32 cmd_data2; /* 50: DVC_I2C_CMD_DATA2 */ |
| u32 reserved_2[2]; /* 54: */ |
| u32 i2c_status; /* 5C: DVC_I2C_STATUS */ |
| struct i2c_control control; /* 60 ~ 78 */ |
| }; |
| |
| struct i2c_ctlr { |
| u32 cnfg; /* 00: I2C_I2C_CNFG */ |
| u32 cmd_addr0; /* 04: I2C_I2C_CMD_ADDR0 */ |
| u32 cmd_addr1; /* 08: I2C_I2C_CMD_DATA1 */ |
| u32 cmd_data1; /* 0C: I2C_I2C_CMD_DATA2 */ |
| u32 cmd_data2; /* 10: DVC_I2C_CMD_DATA2 */ |
| u32 reserved_0[2]; /* 14: */ |
| u32 status; /* 1C: I2C_I2C_STATUS */ |
| u32 sl_cnfg; /* 20: I2C_I2C_SL_CNFG */ |
| u32 sl_rcvd; /* 24: I2C_I2C_SL_RCVD */ |
| u32 sl_status; /* 28: I2C_I2C_SL_STATUS */ |
| u32 sl_addr1; /* 2C: I2C_I2C_SL_ADDR1 */ |
| u32 sl_addr2; /* 30: I2C_I2C_SL_ADDR2 */ |
| u32 reserved_1[2]; /* 34: */ |
| u32 sl_delay_count; /* 3C: I2C_I2C_SL_DELAY_COUNT */ |
| u32 reserved_2[4]; /* 40: */ |
| struct i2c_control control; /* 50 ~ 68 */ |
| u32 clk_div; /* 6C: I2C_I2C_CLOCK_DIVISOR */ |
| }; |
| |
| /* bit fields definitions for IO Packet Header 1 format */ |
| #define PKT_HDR1_PROTOCOL_SHIFT 4 |
| #define PKT_HDR1_PROTOCOL_MASK (0xf << PKT_HDR1_PROTOCOL_SHIFT) |
| #define PKT_HDR1_CTLR_ID_SHIFT 12 |
| #define PKT_HDR1_CTLR_ID_MASK (0xf << PKT_HDR1_CTLR_ID_SHIFT) |
| #define PKT_HDR1_PKT_ID_SHIFT 16 |
| #define PKT_HDR1_PKT_ID_MASK (0xff << PKT_HDR1_PKT_ID_SHIFT) |
| #define PROTOCOL_TYPE_I2C 1 |
| |
| /* bit fields definitions for IO Packet Header 2 format */ |
| #define PKT_HDR2_PAYLOAD_SIZE_SHIFT 0 |
| #define PKT_HDR2_PAYLOAD_SIZE_MASK (0xfff << PKT_HDR2_PAYLOAD_SIZE_SHIFT) |
| |
| /* bit fields definitions for IO Packet Header 3 format */ |
| #define PKT_HDR3_READ_MODE_SHIFT 19 |
| #define PKT_HDR3_READ_MODE_MASK (1 << PKT_HDR3_READ_MODE_SHIFT) |
| #define PKT_HDR3_REPEAT_START_SHIFT 16 |
| #define PKT_HDR3_REPEAT_START_MASK (1 << PKT_HDR3_REPEAT_START_SHIFT) |
| #define PKT_HDR3_SLAVE_ADDR_SHIFT 0 |
| #define PKT_HDR3_SLAVE_ADDR_MASK (0x3ff << PKT_HDR3_SLAVE_ADDR_SHIFT) |
| |
| #define DVC_CTRL_REG3_I2C_HW_SW_PROG_SHIFT 26 |
| #define DVC_CTRL_REG3_I2C_HW_SW_PROG_MASK \ |
| (1 << DVC_CTRL_REG3_I2C_HW_SW_PROG_SHIFT) |
| |
| /* I2C_CNFG */ |
| #define I2C_CNFG_NEW_MASTER_FSM_SHIFT 11 |
| #define I2C_CNFG_NEW_MASTER_FSM_MASK (1 << I2C_CNFG_NEW_MASTER_FSM_SHIFT) |
| #define I2C_CNFG_PACKET_MODE_SHIFT 10 |
| #define I2C_CNFG_PACKET_MODE_MASK (1 << I2C_CNFG_PACKET_MODE_SHIFT) |
| |
| /* I2C_SL_CNFG */ |
| #define I2C_SL_CNFG_NEWSL_SHIFT 2 |
| #define I2C_SL_CNFG_NEWSL_MASK (1 << I2C_SL_CNFG_NEWSL_SHIFT) |
| |
| /* I2C_FIFO_STATUS */ |
| #define TX_FIFO_FULL_CNT_SHIFT 0 |
| #define TX_FIFO_FULL_CNT_MASK (0xf << TX_FIFO_FULL_CNT_SHIFT) |
| #define TX_FIFO_EMPTY_CNT_SHIFT 4 |
| #define TX_FIFO_EMPTY_CNT_MASK (0xf << TX_FIFO_EMPTY_CNT_SHIFT) |
| |
| /* I2C_INTERRUPT_STATUS */ |
| #define I2C_INT_XFER_COMPLETE_SHIFT 7 |
| #define I2C_INT_XFER_COMPLETE_MASK (1 << I2C_INT_XFER_COMPLETE_SHIFT) |
| #define I2C_INT_NO_ACK_SHIFT 3 |
| #define I2C_INT_NO_ACK_MASK (1 << I2C_INT_NO_ACK_SHIFT) |
| #define I2C_INT_ARBITRATION_LOST_SHIFT 2 |
| #define I2C_INT_ARBITRATION_LOST_MASK (1 << I2C_INT_ARBITRATION_LOST_SHIFT) |
| |
| /* I2C_CLK_DIVISOR_REGISTER */ |
| #define CLK_DIV_STD_FAST_MODE 0x19 |
| #define CLK_DIV_HS_MODE 1 |
| #define CLK_MULT_STD_FAST_MODE 8 |
| |
| /** |
| * Returns the bus number of the DVC controller |
| * |
| * Return: number of bus, or -1 if there is no DVC active |
| */ |
| int tegra_i2c_get_dvc_bus(struct udevice **busp); |
| |
| #endif /* _TEGRA_I2C_H_ */ |