| /* |
| * (C) Copyright 2010 |
| * Texas Instruments, <www.ti.com> |
| * |
| * Authors: |
| * Aneesh V <aneesh@ti.com> |
| * |
| * Derived from OMAP3 work by |
| * Richard Woodruff <r-woodruff2@ti.com> |
| * Syed Mohammed Khasim <x0khasim@ti.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef _OMAP4_H_ |
| #define _OMAP4_H_ |
| |
| #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) |
| #include <asm/types.h> |
| #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */ |
| |
| #include <linux/sizes.h> |
| |
| /* |
| * L4 Peripherals - L4 Wakeup and L4 Core now |
| */ |
| #define OMAP44XX_L4_CORE_BASE 0x4A000000 |
| #define OMAP44XX_L4_WKUP_BASE 0x4A300000 |
| #define OMAP44XX_L4_PER_BASE 0x48000000 |
| |
| #define OMAP44XX_DRAM_ADDR_SPACE_START 0x80000000 |
| #define OMAP44XX_DRAM_ADDR_SPACE_END 0xD0000000 |
| #define DRAM_ADDR_SPACE_START OMAP44XX_DRAM_ADDR_SPACE_START |
| #define DRAM_ADDR_SPACE_END OMAP44XX_DRAM_ADDR_SPACE_END |
| |
| /* CONTROL_ID_CODE */ |
| #define CONTROL_ID_CODE 0x4A002204 |
| |
| #define OMAP4_CONTROL_ID_CODE_ES1_0 0x0B85202F |
| #define OMAP4_CONTROL_ID_CODE_ES2_0 0x1B85202F |
| #define OMAP4_CONTROL_ID_CODE_ES2_1 0x3B95C02F |
| #define OMAP4_CONTROL_ID_CODE_ES2_2 0x4B95C02F |
| #define OMAP4_CONTROL_ID_CODE_ES2_3 0x6B95C02F |
| #define OMAP4460_CONTROL_ID_CODE_ES1_0 0x0B94E02F |
| #define OMAP4460_CONTROL_ID_CODE_ES1_1 0x2B94E02F |
| #define OMAP4470_CONTROL_ID_CODE_ES1_0 0x0B97502F |
| |
| /* UART */ |
| #define UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000) |
| #define UART2_BASE (OMAP44XX_L4_PER_BASE + 0x6c000) |
| #define UART3_BASE (OMAP44XX_L4_PER_BASE + 0x20000) |
| |
| /* General Purpose Timers */ |
| #define GPT1_BASE (OMAP44XX_L4_WKUP_BASE + 0x18000) |
| #define GPT2_BASE (OMAP44XX_L4_PER_BASE + 0x32000) |
| #define GPT3_BASE (OMAP44XX_L4_PER_BASE + 0x34000) |
| |
| /* Watchdog Timer2 - MPU watchdog */ |
| #define WDT2_BASE (OMAP44XX_L4_WKUP_BASE + 0x14000) |
| |
| /* |
| * Hardware Register Details |
| */ |
| |
| /* Watchdog Timer */ |
| #define WD_UNLOCK1 0xAAAA |
| #define WD_UNLOCK2 0x5555 |
| |
| /* GP Timer */ |
| #define TCLR_ST (0x1 << 0) |
| #define TCLR_AR (0x1 << 1) |
| #define TCLR_PRE (0x1 << 5) |
| |
| /* Control Module */ |
| #define LDOSRAM_ACTMODE_VSET_IN_MASK (0x1F << 5) |
| #define LDOSRAM_VOLT_CTRL_OVERRIDE 0x0401040f |
| #define CONTROL_EFUSE_1_OVERRIDE 0x1C4D0110 |
| #define CONTROL_EFUSE_2_OVERRIDE 0x99084000 |
| |
| /* LPDDR2 IO regs */ |
| #define CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN 0x1C1C1C1C |
| #define CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER 0x9E9E9E9E |
| #define CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN 0x7C7C7C7C |
| #define LPDDR2IO_GR10_WD_MASK (3 << 17) |
| #define CONTROL_LPDDR2IO_3_VAL 0xA0888C0F |
| |
| /* CONTROL_EFUSE_2 */ |
| #define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000 |
| |
| #define MMC1_PWRDNZ (1 << 26) |
| #define MMC1_PBIASLITE_PWRDNZ (1 << 22) |
| #define MMC1_PBIASLITE_VMODE (1 << 21) |
| |
| #ifndef __ASSEMBLY__ |
| |
| struct s32ktimer { |
| unsigned char res[0x10]; |
| unsigned int s32k_cr; /* 0x10 */ |
| }; |
| |
| #define DEVICE_TYPE_SHIFT (0x8) |
| #define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT) |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| /* |
| * Non-secure SRAM Addresses |
| * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE |
| * at 0x40304000(EMU base) so that our code works for both EMU and GP |
| */ |
| #define NON_SECURE_SRAM_START 0x40304000 |
| #define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */ |
| #define NON_SECURE_SRAM_IMG_END 0x4030C000 |
| #define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K) |
| /* base address for indirect vectors (internal boot mode) */ |
| #define SRAM_ROM_VECT_BASE 0x4030D000 |
| |
| /* ABB settings */ |
| #define OMAP_ABB_SETTLING_TIME 50 |
| #define OMAP_ABB_CLOCK_CYCLES 16 |
| |
| /* ABB tranxdone mask */ |
| #define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7) |
| |
| #define OMAP44XX_SAR_RAM_BASE 0x4a326000 |
| #define OMAP_REBOOT_REASON_OFFSET 0xA0C |
| #define OMAP_REBOOT_REASON_SIZE 0x0F |
| |
| /* Boot parameters */ |
| #ifndef __ASSEMBLY__ |
| struct omap_boot_parameters { |
| unsigned int boot_message; |
| unsigned int boot_device_descriptor; |
| unsigned char boot_device; |
| unsigned char reset_reason; |
| unsigned char ch_flags; |
| }; |
| |
| int omap_reboot_mode(char *mode, unsigned int length); |
| int omap_reboot_mode_clear(void); |
| int omap_reboot_mode_store(char *mode); |
| #endif |
| |
| #endif |